HomeMy WebLinkAboutProduct Approval e
f
Florida Building Code Online https://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=w...
BCI�S Home Log In User Registration Hot Topics Submit Surcharge Stats&Facts Publications FBC Staff BCiS Site Map Links Search
d bp' rf �'"t�Product Approval
�]-; tom""�USER:Public User
Product Approval Menu>Product or Application Searrh>Application LM>Application Detail
FL FL10976-116
Application Type Revision
Code Version 2014
Application Status Approved
*Approved by DBPR.Approvals by DBPR shall be reviewed and ratified by
the POC and/or the Commission if necessary.
Comments
Archived
Product Manufacturer JELD-WEN
Address/Phone/Email 3737 Lakeport Blvd
Klamath Falls,OR 97601
(800)535-3936
fbcl@jeld-wen.com
Authorized Signature Kaede McLaughlin
fbcl@jeld-wen.com
Technical Representative JELD-WEN Corporate Customer Service
Address/Phone/Email 3737 Lakeport Blvd.
Klamath Falls,OR 97601
(800)535-3936
customerserviceagents@jeld-wen.com
Quality Assurance Representative
Address/Phone/Email
Category Exterior Doors
Subcategory Sliding Exterior Door Assemblies
Compliance Method Certification Mark or Listing
Certification Agency American Architectural Manufacturers Association
Validated By American Architectural Manufacturers Association
Referenced Standard and Year(of Standard) Standard Year
AAMA/WDMA/CSA 101/I.S.2/A440 2008
Equivalence of Product Standards
Certified By
Product Approval Method Method 1 Option A
Date Submitted 04/23/2015
Date Validated 05/29/2015
Date Pending FBC Approval
1 of 2 01/31/2017 10:02 AM
Florida Building Code Online https://www.floridabuilding-org/pr/pr_app_dtl.aspx?param—w...
Date Approved 06/02/2015
Summary of Products
i
FL# I Model,Number or Name ;Description
10976.1 i Premium Atlantic Vinyl (Bypass Sliding Patio Door(3800) 190.625"x 95.5"Insulated
Glass(3/16"-3/16"Tempered)(Safety Glazing)
i_---------------
Limits
------..__Limits of Use i Certification Agency Certificate
Approved for use in HVHZ:No FL10976 R6 C CAC OXXX LC-PG50-190.625x95.5.pdf
Approved for use outside HVHZ:Yes I Quality Assurance Contract Expiration Date
Impact Resistant:No i 06/16/2018
Design Pressure:+50/-50 Installation Instructions
Other: FL10976 R6 II PAV_SPD NCTL210-3576-4.pdf
Verified By:American Architectural Manufacturers Association
Created by Independent Third Party:
Evaluation Reports
FL10976 R6 AE PER3044.pdf
Created by Independent Third Party:Yes
10976.2 Premium Atlantic Vinyl j Packet Sliding Patio Door(3800) 190.125"x 95.5"Insulated
Glass(3/16"-3/16"Tempered)(Safety Glazing)
Limits of Use 1 Certification Agency Certificate
Approved for use in HVHZ: No FL10976 R6 C CAC XXXX LC-PG50-190.125x95.5.vdf
Approved for use outside HVHZ:Yes (Quality Assurance Contract Expiration Date
Impact Resistant:No 06/16/2018
Design Pressure:+50/-50 Installation Instructions
Other: 1 FL10976 R6 I1 PAV SPD NCTL210-3576-3.pdf
Verified By:American Architectural Manufacturers Association
Created by Independent Third Party:
Evaluation Reports
I FL10976 R6 AE PER3045.pdf
Created by Independent Third Party:Yes
Back Next
contact Us::2601 Blair Stone Road,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.Coovriaht 2007-2013 State of Florida.::Privacy Statement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send
electronic mail to this entity.instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.'Pursuant to
Section 455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address if
they have one.The emails provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to
supply a personal address,please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under
Chapter 455,F.S.,please click here.
Product Approval Accepts:
® eYI-F M
2 of 2 01/31/2017 10:02 AM
� a
AAMA
(Validator/Operations Administrator) CERTIFICATION PROGRAM
AUTHORIZATION FOR PRODUCT CERTIFICATION
JELD-WEN Windows&Doors
P.O.Box 1329
Klamath Falls,OR 97601
Attn: Jason Kantola
The product described below is hereby approved for listing in the next issue of the AAMA Certified Products Directory. The approval
is based on successful completion of tests,and the reporting to the Administrator of the results of tests,accompanied by related drawings,
by an AAMA Accredited Laboratory.
1.The listing below will be added to the next published AAMA Certified Products Directory.
SPECIFICATION
AAMANVDMA/CSA 101/I.S.2/A440-08 RECORD OF PRODUCT TESTED
LC-PG50-4841x2428(191x%6 SD
COMPANY AND CODE CPD NO. SERIES MODEL&PRODUCT MAXIMUM SIZE TESTED
DESCRIPTION
PREMIUM ATLANTIC VINYL FRAME SASH
JELD-WEN Windows&Doors BYPASS SGD
Code:JW 3557 (pVC)(OXXX)(OG)(INS GL) 4841 mm x 2426 mm 1232 mm x 2359 mm
(REINF)(ASTM)
(15'11"x 8'0") (4'1"x 7'9")
2.This Certification will expire June 16,2018(extended from June 16,2015 per AAMA 103-14a)and requires validation until then
by continued listing in the current AAMA Certified Products Directory.
3.Product Tested and Reported by: National Certified Testing Laboratories
Report No.: 210-3576-3
Date of Report: June 23,2009
Validated for Certification
h, A--'iL
A oci ted Laboratories,Inc.
Date: April 14,2015 Authorized for Certification
Cc: AAMA
JGS T
ACP-04 (Rev.1/11) AmedcWArchitectural Manufacturers Association
11/2"MM EMBEDMENT NAIL FIN INSTALLATION
MDV.DISTANCE
OPTIONAL FROM EDGE:3/4'.
2 BOTH scREWS
MIN.DISTANCE 1/2'MM
FROM EDGE:3/4' �Ehk`.EbMENT 1 1/2"MIN. 1/4"MAX
18" O.C. MAX. 5' MAX. 2%WOOD FRAME EMBEDMENT SHIM SPACE
THRU FRAME, FROM
FIN OPTIONAL s� MIN.DISTANCE 3 Q p
ORNERS LRJ4
FROM EDGE:3/4°,
17" O.C. BOTH SCREWS
MAX.
FRFINE, 2X WOOD FRAME ❑ l=5
OPTIONAL l a
i
Izs 4mm
41— 4.7m" 11/2"MIN.
DOW 99S
EMBEDMENT
I
suss SITE
W I 20.6w4
I OPTIONAL 2 I�ry --------------
G i MIN.DD GE:ANCE
3/4 I.�a
L 1 GLAIING DETAIL FROM EDGE:3/4° WOOD FRAME SECTION(TYP)
' FRAME SECTION MP) HORIZONTAL SECTION
VERTICAL SECTION NOTE:T Tk Delrnen MWN Flo 6Wood Op.9.
I ^u00R WIDTH (190 5/8' MAX.) 1 "°gym^°^-�^�•°+••-^°°+
TYPICAL ELEVATION WITH FASTENER 5PACING
TWO,THREE AND FOUR PANEL '/4'MAX
SPACONFIGURATIONS APPROVED 514
2x wOODoe FRAME AME
MM DISTANCE 11/2'MM
FROM EDGE:3/4'
3 PARED
MDQ DISTANCEMax Frame DP RATING IMPACT
OPTIONAL ' . HEDGE.)/`'' 190 5/8" x 951/2" +50/-50 NO
ROTHBOTSCREWS
11/2'MIN.EMBEDMENT
Installation Notes: General Notes:
1. Seal flangelframe to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria of
2. Use#10 PH or greater fastener through the nail fin with sufficient length to penetrate a minimum of the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
11/2"into the wood framing. For 2x wood frame substrate(min.S.G.=0.42). Building Code(FBC)and the industry requirements for the stated conditions.
3. Use(2)-#10 PH or greater fastener through the frame per location with sufficient length to penetrate a 2. All glazing shall conform to ASTM E1300.
minimum of 11/2"into the wood framing. For 2x wood frame substrate(min.S.G.=0.42). 3. At minimum,glazing is 4.7 mm tempered-16 mm airspace-4.7 mm tempered glass.
4. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 4. Use structural or composite shims where required.
to the structure. The host structure is the responsibility of the architect or engineer of record for the
project of installation.
Digitally signed by Hermes F.Norero,P.E.
This schedule addresses only the fasteners required to anchor the Reason:I am apprQ�uttlis jgcflnEnt
window to achieve the rated design pressure up to the size limitations Date:2014.0. M: °2 0 '
noted. It is not intended as a guide to the installation process and does �%
PROJECT ENGINEER: DATE:
` ••••• •• JELDVEN Klamath
F Lakeport Blvd
not address the sealing consideration that may arise in different wall �� Q ,.• F �� -- 08/1H/2014
conditions. For the complete installation procedure,see the instructions ��: �,� •'.�� DRAWN BY: scALE: Klamath Falls,OR.97601
packaged with the window or go to 7
D.Vezo Phone: (541)882-3451
www.jeld-wen.com/resources/installation. _ * * _ CHECKED BY: TITLE:J. Kantola
DISCLAIMER: = -0 T T Q = APPROVED BY: Premium Atlantic Vinyl Sliding Patio Door 0X)0(
This drawing and its contents are confidential and are not to be % O ••'� 0 DP:• �: P T P O r
reproduced or copied in whole or in part or used or disclosed to others s
141, a.
a. 4Nelo 8%
,� �M�M� l
except as authorized by JELD-WEN Inc. � �° �° 888 IDENTIFIER
No. 576- PLANT
ANLOCATION:
L e FL: CAD DWG.NO.: REV: oo SHEET
S OF4
THROUGH FRAME
MIN.DISTANCE INSTALLATION
FROM EDGE:3/4'
2 Z 1 I/2'MM
� EMBEDMENT
11/2'MIN. 1/4°MAX
5" MAX. Q ❑ 1/4'MAX EMBEDMENT SHIM SPACE
18" O.C. MAX. FROM SHIM SPACE
THRU FRAME 'CORNERS r p
MIN.DISTANCE 1
FROM EDGE:3/4°
> 17" D.C.
MAX. ❑
� THRU 1 2 F3
"N FRAME i 3 no
I1 IL JI
27.4.7
N
i 4.7mm 4.7mm
v i DOW 994 4
MIN.DISTANCE 2
C=7 i x'20.6- FROM EDGE:3/4° o0
a - --------------
a
O
O f i GLAZING DETAIL 1
LFRAME SECTION(TVP) FRAME JAMB SECTION(TYP)
uDOOR WIDTH (190 5/8" MAX.) VERTICAL SECTION HORIZONTAL SECTION
TYPICAL ELEVATION WITH FASTENER SPACING
TWO,THREE AND FOUR PANEL
1/4"MAX
CONFIGURATIONS APPROVED 0 C'
SHSPACE
SPACE
MBEDMENT
Max Frame I DP RATING IMPACT
MIN.DISTANCE• 3 190 5/8" x 951/2"1 +50/-50 J NO
FROM EDGE:]q'
Installation Notes: General Notes:
1. Seal flange/frame to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria of
2. Use(2)-#10 PH or greater fastener through the frame per location with sufficient length to penetrate a the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
minimum of 11/2"into the wood framing. For 2x wood frame substrate(min.S.G.=0.42). Building Code(FBC)and the industry requirements for the stated conditions.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 2. All glazing shall conform to ASTM E1300.
to the structure. The host structure is the responsibility of the architect or engineer of record for the 3. At minimum,glazing is 4.7 mm tempered-16 mm airspace-4.7 mm tempered glass.
project of installation. 4. Use structural or composite shims where required.
This schedule addresses only the fasteners required to anchor the
window to achieve the rated design pressure up to the size limitations
noted. It is not intended as a guide to the installation process and does PROJECT ENGINEER: DATE:
,• •• iEL,�N 3737 Lakeport Blvd
not address the sealing consideration that may arise indifferent wall 08/12/2014
conditions. For the complete installation procedure,seethe instructions ��;'�,� �� DRAwN BY: scALE: Klamath Falls,OR.97601
packaged with the window or go to 7 D.Vezo NTS Phone: (541)882-3451
CHECKED BY: TIRE:
www.jeld-wen.com/resources/installation. _ * * _ J. Kantola
DISCLAIMER: -° T T G= = APPROVED BY: Premium Atlantic Vinyl Sliding Patio Door 0X)0(
This drawing and its contents are confidential and are not to be ���••'•. L DP ���� P T P 0 E rs�
64
reproduced or copied in whole or in part or used or disclosed to others N;�b' a ��` �bi� �l3
except as authorized by JELD-WEN Inc. s88 ase INGTL210-3576-EMBANVenice FL: CAD DWG.No.: REV: oo SHEET 20F4
MMDISTANCE MMDISTANCE MASONRY INSTALLATION
FROM EDGE:2 Ur FAOM ENS 2 Vr
• • MASONiY
.. • •• BIS
• s e. 1 V,•MM
EM6EOMEM
7 B" O.C. MAX. 5" MAX. t
FROM 1 va•MIN v4•MAX
THRU FRAME-�-t-r ORNERS ❑ w•MAx EMBEDMENT 5HIM5PACE
5N[M SPACE
MIN.DxsTANOE a �'
� 1# 4 1# 4 17" 0•C•MAX. FROM EDGE:2 V2• gr
'
THRU
FRAME I 2 'e ❑ �'
� I
26A".
,.I•m 4.—
..
Dow sys
6 Damn MIN.DISTANCE 2•'•
FROM ED6E:21/2' Q � •
W
= I -----------
I
K
0 I BLOCK RAME Jt
o I GLAZING DETAIL FAMB SECTION(TYP)
L I
FRAME SECTION(TYP) HORIZONTAL SECTION
VERTICAL SECTION
,.,,vw......w-w
: DOOR WIDTH (190 5/9" MAX.) I
TYPICAL ELEVATION WITH FASTENER SPACING 0
TWO,THREE AND FOUR PANEL p 1/.
SHVASP SPACE
CONFIGURATIONS APPROVED •
G(
? 2 1V,•MM
d :•. •• 4 � EMBEDMENT
•: Max Frame DP RATING IMPACT
MM DISTA" 190 5/8° x 951/2" +50/-50 NO
MIN.DISTANCE l NT
FROM ED6E:2 VT FROM ED6E:21/Y
Installation Notes: General Notes:
1. Seal flange/frame to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria of
2. Use(2)-3/16"Tapcon or equivalent fasteners through frame per location with sufficient length to the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
penetrate a minimum of 11/4"into concrete or masonry ar each location with a 2112"min.distance Building Code(FBC)and the industry requirements for the stated conditions.
from the edge. For concrete(min.fc=3000 psi)or masonry substrate(CMU shall conform to ASTM 2. All glazing shall conform to ASTM E1300.
C90). 3. At minimum,glazing is 4.7 mm tempered-16 mm airspace-4.7 mm tempered glass.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 4. Use structural or composite shims where required.
to the structure. The host structure is the responsibility of the architect or engineer of record for the
project of installation.
This schedule addresses only the fasteners required to anchor the
window to achieve the rated design pressure up to the size limitations
noted. It is not intended as a guide to the installation process and does �V PROJECT ENGINEER: DATE:
•..•• •. i 3737 Lakeport Blvd
not address the sealingconsideration that may arise in different wall .• -- 08/12/2014
conditions. For the complete installation procedure,see the instructions :�� '�,� •' �� i DRAWN BY: SCALE:
JELEMENKlamath Falls,OR.97601
packaged with the window or go to 7
D.Vezo NTS Phone: (541)882-3451
www.jeld-wen,comlresourcesfinstallation. _ * * _ CHECKED BY: TITLE:J. Kantola
DISCLAIMER: C = APPROVED BY: Premium Atlantic Vinyl Sliding Patio Door 0X)0(
This drawing and its contents are confidential and are not to be %�C ••••. 4.0 OrP•'•���., : PA�RRT P 0 E�r D
reproduced or copied in whole or in part or used or disclosed to others ��i tin VJV k0 a *- U6� U
except as authorized by JELD-WEN Inc, BOB AHOat � 999 IDENTIFIER No. PLANT NAME AND LOCATION: CAD DWG.No.: REV: SHEET
p bYY�� NCTL210-3576- -FBC Venice, FL 00 3OF4
MRI DISTANCE MIN,DISTANCE MASONRY INSTALLATION
FROM EDGE,2 Vr FROM EDGE.2 Vr
• • MAGOMY
' • GLOC[
•• A
y e- 1 v.•MM
EMREDMEM
1B" O.C. MAX. 5" MAX. t
FROM 1 va°MIN. 1/4 MAX
THRU FRAME t-1 ' ORNERS w•MU �ED'"E"T SMM SPACE
SHIM WOE
r(/ 7" O.C. MM DISTANCE
�1I MAX. FROM EDGE:z yr0.
THRU ❑
FRAME 1 2 '• F�
Vm"- 4.7-
1 DDw GGs
� n
MIN
F.222=21'
V 2 '
Q '° •
W
1
in GL
i AZING DETAIL BL=
FRAME JAMB SECTION(TYP)
L FRAME SECTION nvP) HORIZONTAL SECTION
VERTICAL SECTION
DOOR WIDTH (190 5/8" MAX.) I
TYPICAL ELEVATION WITH FASTENER SPACING 0
TWO,THREE AND FOUR PANEL p 1HA
SXIM2MSPACE
CONFIGURATIONS APPROVED t •
i
t.. 11/4-MM
• d : '• t � EMDEDMEM
•: Max Frame N RATING IMPACT
""GD`•T190 5/8" x 95 1/2" +50/-50 NO
BLOC%
MM NSTANCE MM DISTANCE
FROM EDGD 2 VT FROM EDGE:2 ur
Installation Notes: General Notes:
1. Seal flange/frame to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria of
2. Use(2)-3/16"Tapcon or equivalent fasteners through frame per location with sufficient length to the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
penetrate a minimum of 11/4"into concrete or masonry ar each location with a 21/2"min.distance Building Code(FBC)and the industry requirements for the stated conditions.
from the edge. For concrete(min.f =3000 psi)or masonry substrate(CMU shall conform to ASTM 2. All glazing shall conform to ASTM E1300.
C90). 3. At minimum,glazing is 4.7 mm tempered-16 mm airspace-4.7 mm tempered glass.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 4. Use structural or composite shims where required.
to the structure. The host structure is the responsibility of the architect or engineer of record for the
project of installation.
This schedule addresses only the fasteners required to anchor the
window to achieve the rated design pressure up to the size limitations
noted. It is not intended as a guide to the installation process and does �V ,� PROJECT ENGINEER: DATE:
` ••••• •• • ' JELDVEN 3737 Lakeport Blvd
not address the sealing consideration that may arise in different wall �� Q' ,.F (�` �� -- 08/12/2014
conditions. For the complete installation procedure,see the instructions : ��;' '.��
DRAWN BY: SCALE: Klamath Falls,OR.97601
packaged with the window or go to ; D.Vezo NTS Phone: (541)882-3451
.. CHECKED BY: TITLE:
www.jeld-wen.com/resources/installation. _ * * = J. Kantola
DISCLAIMER: = "� T T 4 = APPROVED BY: Premium Atlantic Vinyl Sliding Patio Door 0X)0(
-A ••
This drawing and its contents are confidential and are not to be %0 •• �0
reproduced or copied in whole or in part or used or disclosed to others i� " "''�6 i�a
except as authorized by JELD-WEN Inc, a _—�Y� 998 IDENTIFIER No. PLANT NAME AND LOCATION: CAD DWG.No.: REV: SHEET
Oi NCTL210-3576- -FBC Venice, FL 00 30F4
STEEL INSTALLATION
I MIN.D2S7A
FROM EDGE:1/2 1/2'
3 2 2 Mia rmbedm t
of throe thrrcda
Pvt frame
la gaugemin Min.embedment 1/4"MAX
5' MAX. C11 0 12 steel stud of three threads SHIM SPACE
18' O.C. MAX. FROMPact frame
THRU FRAME 1/4'MAX _
1117
NERsSHIM SPACE MIN.DISTANCE" 0.C. FROM EDGE:1/2" Ll
I:
MAX.
THRU
e FRAME
Q�
\ I 25.4— IS gauge min 3
Steel Stud
4.7mm4.7
-F-F�-.-� 4.7-10 I I 1 '
v I DOW 995
F �
Z
MIN.DISTANCE 2
W
= i SS BnE
sL20.enun FROM EDGE:1/2" se=
' Q --------------
0 d�
0 i
� � GLAZING DETAIL �
L
FRAME SECTION(TVP) FRAME JAMB SECTION(TYP)
I
DOOR WIDTH (190 5/8' MAX.) � vERTtcah sEcrloN HORIZONTAL SECTION
.ae .,.e,,a•.
TYPICAL ELEVATION WITH FASTENER SPACING
TWO,THREE AND FOUR PANEL 0 0
CONFIGURATIONS APPROVED Q I/4^MAX
SVQM SPACE
Is gouge m1n
3 2 2 sled shd
Max Frame I DP RATING IMPACT
AUX°DG: ft Mh.* .d 190 5/8" x 95 1/2" 50/-50 NO
FROM EDGE: f than tluead. +
Installation Notes: General Notes:
1. Seal flange/frame to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria of
2. For anchoring into metal framing,use(2)-#10 TEK Self Tapping screws per location with sufficient the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
length to achieve a minimum embedment of three threads past the frame thickness. Locate anchors as Building Code(FBC)and the industry requirements for the stated conditions.
shown in elevations and installation details. Steel substrate min.18 ga(fy=33 ksi). 2. All glazing shall conform to ASTM El 300.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 3. At minimum,glazing is 4.7 mm tempered-16 mm airspace-4.7 mm tempered glass.
to the structure. The host structure is the responsibility of the architect or engineer of record for the 4. Use structural or composite shims where required.
project of installation.
This schedule addresses only the fasteners required to anchor the ,,1
window to achieve the rated design pressure up to the size limitations ���
noted. At—
It is not intended as a guide to the installation process and does �� �� PROJECT ENGINEER: DATE:
not address the sealing consideration that may arise in different wall ��� ,.••' �` �i� -- . 08/12/2014 JEL13rWENKlarriath3737 Lakeport Blvd
conditions. For the complete installation procedure,see the instructions � ;'�,� • O D VeY: SCALE. NTS PhoneFalls,OR.97601
packaged with the window or go to (541)882-3451
www.jeld-wen.com/resourcesriinstallation. _ * — CIiECKi TIRE:
J. Kantola
DISCLAIMER: = -� T T ; = APPROVED BY: Premium Atlantic Vinyl Sliding Patio Door 0X)0(
This drawing and its contents are confidential and are not to be %� •'• `�: P�ar,(PboE�r�f
reproduced or copied in whole or in part or used or disclosed to others 998 a�,�t 998 IDENTIFIER No. PLANT NAME AND LOCATION: CAD DWG.No.: REV: SHEEP
except as authorized byJELD-WEN Inc. "� L �-r NCTL210-3— -FBC Venice, FL 00 4OF4