The URL can be used to link to this page

Home My WebLink AboutBUILDING PERMIT APPLICATION (2) r' MIAMI-DADE COUNTY MIAMI-DADE PRODUCT CONTROL SECTION REGULATORY AND ECONOMIC RESOURCES(RER) 11805 SW 26 Street,Room 208 llIE ADMINISTRATION DIVISION Miami,Florida 33175-2474 T(786)315-2590 F(786)315-2599 NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy Owens Corning Roofing and Asphalt,LLC One Owens Corning Parkway Toledo,OH 43659 SCOPE: This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be used in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ). This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section (in Miami-Dade County) and/or the AHJ (in areas other than Miami-Dade County)reserve the right to have this product or material tested for quality assurance purposes. If this product or material fails to perforin in the accepted manner,the manufacturer will incur the expense of such testing and the AHJ may immediately revoke,modify, or suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements of the applicable building code. This product is approved as described herein, and has been designed to comply with the Florida Building Code including the High Velocity Hurricane Zone of the Florida Building Code. DESCRIPTION: Oakridge®,TruDefinition Oakridge®,and TruDefinition Oakridge®Artisan Colors Shingles LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein. RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change in the applicable building code negatively affecting the performance of this product. TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the materials,use, and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any product, for sales,advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of this NOA shall be cause for termination and removal of NOA. ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then it shall be done in its entirety. INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This NOA renews NOA No. 12-0430.01 and consists of pages 1 through 4. The submitted documentation was reviewed by Gaspar J Rodriguez. { NOA No.: 15-1102.03 MIAMI•DADE COUNTY Expiration Date: r 02/03/21 Approval Date: 01/21/16 Page 1 of 4 1 ROOFING ASSEMBLY APPROVAL Category: Roofing Sub-Category: Asphalt Shingles Materials: Laminate Deck Type: Wood SCOPE This approves a roofing system using Oakridge®,TruDefinition Oakridge®,and TruDefinition Oakridge® Artisan Colors asphalt shingles manufactured by Owens Corning as described in Section 2 of his Notice of Acceptance. PRODUCT DESCRIPTION Product Dimensions Test Product Description Specifications Oakridge®, 131/4" x 39 3/8" TAS 110 A heavy weight, fiberglass reinforced laminate TruDefinition Oakridge®,and asphalt shingle with continuous bead of TruDefinition Oakridge® sealant. Artisan Colors Manufacturing Locations#1,2,3,4 Oakridge®, 131/4" x 39 3/8" TAS 110 A heavy weight, fiberglass reinforced laminate TruDefinition Oakridge®,and asphalt shingle with dashed bead of sealant. TruDefinition Oakridge® Artisan Colors Manufacturing Location#1,2,3,4,5 MANUFACTURING LOCATION 1. Memphis, TN 2. Irving, TX 3. Savannah, GA 4. Jacksonville,FL 5. Atlanta, GA EVIDENCE SUBMITTED Test Agency Test Identifier Test Name/Revort Date PRI Construction OCF-153-02-01 TAS 100 09/22/10 Materials Technologies OCF-152-02-01 TAS 100 09/21/10 OCF-158-02-01 TAS 100 11/10/10 OCF-151-02-01 TAS 100 09/27/10 OCF-150-02-01 TAS 100 09/21/10 OCF-165-02-01 TAS 100 01/07/11 OCF-170-02-01 TAS 100 06/06/11 OCF-177-02-01 TAS 100 12/05/11 OCF-178-02-01 TAS 100 02/02/12 NOA No.: 15-1102.03 Mu►r�i•DaoE couNnr Expiration Date: 02/03/21 Approval Date: 01/21/16 Page 2 of 4 Q Underwriters 09NK14530 ASTM D 3462 12/31/09 Laboratories R2453 ASTM D 3462 10/11/10 R2453 ASTM D 3462 11/03/10 R2453 ASTM D 3462 10/11/10 R2453 ASTM D 3462 10/11/10 R2453 ASTM E 108 01/13/11 R2453 ASTM E 108 10/11/10 R2453 ASTM E 108 11/03/10 R2453 ASTM E 108 10/11/10 R2453 ASTM E 108 10/11/10 09NK14530 TAS 107(ASTM D 316 1) 12/31/09 R2453 TAS 107 (ASTM D 316 1) 10/27/15 IONK13947 TAS 107 (ASTM D 316 1) 11/12/10 R2453 TAS 107 (ASTM D 316 1) 10/11/10 R2453 TAS 107(ASTM D 316 1) 10/27/15 IONK13947 TAS 107 (ASTM D 316 1) 01/28/11 11CA15662 TAS 107 (ASTM D 316 1) 05/27/11 11CA65092 ASTM D 3462/TAS 107 (ASTM D 316 1)/ASTM E 108 02/14/12 11CA40912 ASTM D 3462/TAS 107(ASTM D 3161)/ASTM E 108 11/30/11 LIMITATIONS 1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for fire ratings of this product. 2. Shall not be installed on roof mean heights in excess of 33 ft. 3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and Rule 61 G20-3 of the Florida Administrative Code. INSTALLATION 1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115. 2. Flashing shall be in accordance with Roofing Application Standard RAS 115 3. The manufacturer shall provide clearly written application instructions. 4. Exposure and course layout shall be in compliance with Detail 'A', attached. 5. Nailing shall be in compliance with Detail 'B', attached. LABELING 1. Shingles shall be labeled with the Miami-Dade Seal as seen below,or the wording"Miami-Dade County Product Control Approved". MIAMI•DADE COUNTY • BUILDING PERMIT REQUIREMENTS 1. Application for building permit shall be accompanied by copies of the following: 1.1 This Notice of Acceptance. 1.2 Any other documents required by the Building Official or the applicable code in order to properly evaluate the installation of this system. NOA No.: 15-1102.03 MIAMI•DaD- ---- Expiration Date:02/03/21 Approval Date:01/21/16 Page 3 of 4 i DETAIL A EDGE OF ROOF ------- 'I 9-1/2" i i i 13' THIRD COURSE -61 SECOND COURSE rA/ L------i rA/ i i ---- FIRST COURSE DETAIL B 39 3/8" 13-1/4" 61„ 8 5 5/8" EXPOSURE END OF THIS ACCEPTANCE NOA No.: 15-1102.03 Mwe 1jj2 ejq-:3 r Expiration Date:02/03/21 Approval Date: 01/21/16 Page 4 of 4