HomeMy WebLinkAboutBuilding Permit Application i
ALL APPLICABLE INFO MUST BE COMPLETED FOR APPLICATION TO BE ACCEPTED
Date: 2/2/16 Permit Number:MM
•
Building Permit Application j
Planning and Development Services
Building and Code Regulation Division j
2300 Virginia Avenue,Fort Pierce FL 34982
Phone: (772)462-1553 Fax: (772)462-1578 Commercial Resif'ential x
PERMIT APPLICATION FOR: Roof
PROPOSED IM,,PROVEMENT`LOCATI.OU:
7946 HORNED LARK
Address: �
Legal Description: EAGLES RETREAT AT SAVANNA CLUB PHASE 2 BLK 60 LOT 23
Property Tax ID#: 3424-702-0091-000-3 Lot No.23
Site Plan Name: I" Block No. 60
Project Name: i
i
Setbacks Front Back: Right Side: Left Side: '
DETAILED DESCRIPTION OF WORK '
TEAR OFF EXISTING ROOF INSTALL PEEL N STICK UNDERLAYMENT AND TAMKO SHINGLES. ROOF IS 3/12 PITCH
CONSTRUCTION INFORMATION: i.
Additional work to e e orme under this permit–check ec a _appy:
❑HVAC El Gas Tank a Win;
dows/Doors❑Gas Piping Shutters
Electric ❑ Plumbing Sprinklers ElGenerator I y I Roof
Sq. 1750
Total S Ft of Construction: S Ft.of First Floor:
,000.00
Cost of Construction:$ 6 Utilities: —SewerSeptic Building Height: 1
� � ,.� ��.,°���. .,.E iV ,
OWNER/LESSEE:, CONTRACTOR �; i�
Name LEE BURKETT Name: BRIAN J MALONEY
Address:7946 HORNED LARK Company: TREASURE COAST ROOFING
City: FORT PIERCE State:FL Address: 1816 SW'BILTMQRE
Zip Code: 34952 Fax:NIA City: PORT ST LUCIE State:FL
Phone No. Zip Code: 34984 i. , Fax: 772-343-8358
E-Mail:NIA Phone No. 772-370-9770
Fill in fee simple Title Holder on next page(if different E-Mail: TCROOFINGLLC(6GMAIL.COM
from the Owner listed above) State or County License: CC1330653
i
If value of construction is$2500 or more,a RECORDED Notice of Commencement is required.
I
i
1
� I
SUPPLEMENTAL CONSTRUCTION LIEN LAW INFORMATION:
DESIGNER/ENGINEER: Not ApplicableMORTGAGE COMPANY: Not Applicable
Name: Name:
Address: Address:
City: State: City: I State:
Zip: Phone: Zip: Phone:l
i
FEE SIMPLE TITLE HOLDER: _Not Applicable BONDING COMPANY: I , Not Applicable
Name: Name:
Address: Address: I
City: City: I
Zip: Phone: Zip: Phone:
I
' I !
I certify that no work or installation has commenced prior to the issuance of a permit.
St.Lucie County makes no representation that is granting a permit will authorize the permit holder to build the subject structure
which is in conflict with any applicable Home Owners Association rules,bylaws or and covenantsithat may restrict or prohibit such
structure. Please consult with your Home Owners Association and review your deed for any restrictions which may apply.
In consideration of the granting of this requested permit, I do hereby agree that I will,in all respects,perform the work
in accordance with the approved plans,the Florida Building Codes and St.Lucie County Amendments.
i I
The following building permit applications are exempt from undergoing a full concurrency review:room additions,
accessory structures,swimming pools,fences,walls,signs,screen rooms and accessory uses to another non-residential use
WARNING TO OWNER:Your failure to Record a Notice of Commencement may result in your paying twice for
improvements to your property.A Notice of Commencement must be recorded a'n'd posted on the jobsite
before the first inspection. If you intend to obtain financing, consult with lender or an attorney before
commencing wor r rec rdin our Notice of Commencement.//J/ Z
'
--
I--- � .1�4",
I s
_Sign ture o ner/ sse /Ag t Signature of Contractor/L a Holder
STATE OF FLORIDA STATE OF FLORIDA
COUNTY OF ST LUCIE COUNTY OF ST LUCIE !
The forming instrum was acknowledged efore me The for oing instrume as I cknowliedged before me
this day ofIf r- 20 Uby this day of 20 by
BRIAN J MALONEY1�97 BRIAN J MALONEY !
(Name of perso a edging) (Name of perso c ledging)
I i
i
(Signatur f)VIary Public-State of Florida) (SignaturqWf Notary P lic-State of Florida)
Personally Known X OR Produced Identification Personally Known X OR:Produced Identification
Type of Identification Produced i;Fli91i996 y: Type of Identification Produced
Commission No.
j e oe �a11Commission No.
21((SSe(
9Na ° Gpy122q�F '�
ti o 0
rn a
Revised 07/15/2014
a? 1;FF 122434 #FF m a
j y 122434
'.,` �tC°ST°,`.��i\~ ��A;.°;A'oMryScM�o°OQ�O��a
REVIEWS FRONT ZONING; f1IIt xS�PERVISOR PLANS VEGETATION 5EAT f��`� EoFF IVIANGROVE
COUNTER REVIEW REVIEW REVIEW REVIEWREVIE'u1f€0.1'e REVIEW
DATE
COMPLETE
INITIALS j ; I
I i
I
I
4
oddaBuilding Code Online :https://wwwwfloridabuilding.orglpr/gr app_od.aspx?param=wGEVY...
fit
x r 4 z x , z a r rx 1 1 i t
�7s�a�r
��,:c..,._..�_.�,...t'.w...-...-........ „k .N..x ..�. -.:�.-,.........-.,..,Y�..,.__ ,-.�.i . �' ;n•.ti>..m...
SCIS Home tog in User R.eWration ry Hot Topics Submit Surcharge Stats&Facts Publications FflC Stafi BCt5 51te Map UMcs Search
US1n2Sa,
fJ �S51(311 U1_ Product Pub Approval I
M , ' Pmarrctgpmvaiteriti>¢ vcc vrpsttvQ s?�>n�yty?ILa1 t.>APP scntwn oetaa ! i
FL# .FL16048-R3 ! C
" — Application Type Revision
Code Version 2014
Application Status Approved
Comments I
Archived
' I I
Product Manufacturer TRT-BUILT Roofing Products
i Address/Phone/Email 9050 Louisiana Street
Merrillville,IN 46410
(201)842 2449 ! ';
david.ruiz@Itrlbuiltmateriaisgroup.comf;
Authorized Signature David Ruiz I
david.ruizC%tribuiltmateriaisgroup.com'
i
Technical Representative David Ruiz
Address/Phone/Email 25D Route 17 North i
East Rutherford,N3 07073
(201)842-2449 ! 1
david.ruiz@tribuiltmatedalsgroup.com;
Quality Assurance Representative
Address/Phone/Email ;
Category Roofing
Subcategory Underlayments ?
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed
Florida Professional Engineer
Evaluation Report-Hardcopy Received
i
i
Florida Engineer or Architect Name who developed Robert Nieminen
the Evaluation Report i
Florida license PE-59166 l
Quality Assurance Entity UL LLC I
Quality Assurance Contract Expiration Date 10/16/2017
Validated By Sorin W.Knezevich,PE I
Validation Checklist-Hardcopy Received
I I.
i
Certificate of Independence Ft.16048 R3 COI_2015 01 COI Nie ininen.gdf
Referenced Standard and Year(of Standard) Standard Year
ASTM D1970 ('; 2009
ASTM 6155 2005
FRSA/rRI April 2012(04-i2) 2012
TAS 103 i 1995
I
1 of 2 5/24/2016 9:58 AM
1 A
I
odda Building Code Online https://www.floridabuilding.org or/pr Opp_ fl.aspx?param=wGEVX...
I'
Equivalence'of Product Standards
Certified By
Sections from the Code I
I
I
Product Approval Method Method 1 Option D i.
Date Submitted 10/08/2015
Date Validated 10/19/2015
Date Pending FBC Approval 10/21/2015
Date Approved 12/15/2015
Summary of Products
-- - l - - - -
_
'FL# Model,Number or Name l Description
16048.1 TRI-BUILT Roof Underlayments Self-adhering,modified bitumen roof underpayments
Limits of Use ~ u 1 Installation Instructions i I
Approved for use In HVHZ:No FL16048 R3 II 2015 10 FItVI L ER(TRI i
Approved for use outside HVHZi Yes BUILT UNDERLAYMENTS FLY6048-R3ipdf
Impact Resistant:N/A € Verified By:Robert'Niemine6:10 -59166
Design Pressure:+N/A/-45 Created by Independent Thi`diParty:Yes
Other:1.)The design pressure noted herein pertains to use i Evaluation Reports 1
of foam-on tile systems overtop the self-adhering FL16048 R3 AE 2015 10 FINAL ERI TRI- i
underpayment for one particular application.See ER Section :BUILT INDERLAYMENTS FL. 648-113pg
-5.6 for details.2.)Refer to ER Section 5 for other Limits of Created by IndependentThicd Party:Yes
I
Use. " I
I
I .
CQMacLUs 7:154D North Monroe Street Ta�has=4a FL 32 99 Phone:850-08�-1824
The State of Florida is an A4/EED employer.'Cppydgitt;7,gOL-2Q1,7,.State of Fbdd4, :Prtv?lu
zatr..m6t::wx2rAIpty statement::I thud Stat mot
Under Florida law,emal addresses are pudic records.U you do not want your e-ma address released In response to a Publk-records(request,do not send electronic
mal to this entity.Instead,contact the office by phone or by traditional mal.d you have any questions,pkase contaCl 650.487.1395.•ihusuant to Section
455.275(1),Florida Statutes,effective October 1,2012,kensees Ikensed:under chapter 455.FS.must provide the Department with an eman address r they have
one_The emacs provided may be used for official commuNmtloowith the licensee.However emar addresses are pubac,record.Ir you do rot wish to supphy a
personal address,pleaseprovidethe Department with an emal address which can be made avallableto the pubic.To determine F you area kensee under Chapter
455,F.S.,please dick heS€. 1
' Product Approval Accepts:
i I
I ,
I
I
1,
I
ii
1
1 I
I d
I I
I
! Ii,
I
2 of 2 I j 5/24/2016 9:58 AM
I.
i I -
� I
I,
i
I
t
I
I
EXTERIOR RESEARCH&DESIGN,I.I.C.
Certificate of Authorization#9503
TRINITY ERD 353 CHRISTIAN STREET,UNIT#13
OXFORD,CT 06478
PHONE:(203)262-9245
FAX:(203)262-9243
EVALUATION REPORT
Allied Building Products Corp. Evaluatiori ReportiA42960.30.12-113
dba TRI-BUILT Roofing Products FL16048-113
9050 Louisiana Street Date of Issuance:10/25/2012
Merrillville;IN 46410 Revision 3: 10/08/2015
SCOPE:
This Evaluation Report is issued under Rule 61620-3 and the applicable rules and regulations governing the use of
construction materials inthe State of Florida.The documentation submitted has been reviewed by Robert.Nieminen,
P.E. for use of the product under the Florida Building Code and Florida Building;:Code, Residential Volume. The
products 'described herein have been evaluated for compliance with the 51h Edition (2014) Florida Building Code
sections noted herein.
DESCRIPTION: TRI-BUILT Roof Underlayments
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality 'Assurance Agency noted
herein. i
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named products)changes,the referenced
Quality Assurance documentation changes,or provisions of the Code that relate to the product,change. Acceptance of
this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P'E. if the product
changes or the referenced Quality Assurance documentation changes. Trinity I ERD requires a'complete review of this
Evaluation,Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "Trinity IERD Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed,then it shall be done;in its entirety.
INSPECTION:Upon request,a copy of this entire Evaluation Report shall be provided to!the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Buildin, Official.
This Evaluation Report consists of pages 1 through S.
Prepared by: I'M.
Robert J.M.Nieminen,P.E. ��4;�S dV� `��;p 7hefatshnllesealappearih8wasauthtiraedbyRobert ieminen,
,,,,µ,+^ P.E.on 10/08/2015.Thisdoes not serie as an electran&atly signed
Florida Registration No.59156,Florida DCA ANE1983 document.Isigned,sealetl hatdcoples have been transmitted to the
Product Approval Administrator and to the named client
CERTIFICATION OF INDEPENDENCE:
1. Trinity ERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any;compaiy manufacturing or
distributing products it evaluates.
2. Trinity I ERD is not owned,operated or controlled by any company manufacturing or distributing product
s;it evaluates.
3. Robert Nieminen, P.E.does not have nor will acquire,a financial interest in any company manufacturinor distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen,P:E.does not have,nor will acquire,a financial interest in an other entity involved i I,the q y y I approval process of the
product.
5. This is a building code evaluation. Neither TrinitvlERD nor Robert Nieminen,P.E. are, in any way,the Designer of Record for any
project on which this Evaluation Report,or previous versions thereof,is/was used for permitting or design guidance unless retained
specifically for that purpose.
l ,
I
I' I
I
i
I, ARD
4, I
ROOFING COMPONENT EVALUATION: l
2. SCOPE: I
Product Category: Roofing i
Sub-Category: Underlayment
Compliance Statement: TRI-BUILT Roof Underlayments,as produced by TRI-BUILT, havelI'demon f trated compliance
with the following sections of the Florida Building Code through testing in accordance wit Oe following-Standards,
Compliance is subject to the Installation Requirements and Limitations/Conditions of Use set forth herein.
2. STANDARDS:
Section Property 1 Standard j
Year
1507.2:4,1507.2.8,1507.2:9.2, Physical Properties ASTM D1970 2009
1507:4.5.1,1507.5.31'.1507.7.3
1504.6 Accelerated Weathering ASTM GISS j j 2005
1507.33 Installation Practice FRSA/TRI April 2012(04-12)' 2012
1523.6.5.2.1 Physical Properties TA5 iD3 i i 1,995
i
3. REFERENCES:
E_ntity Examination Reference I i Date
ERD(TST6049) Physical Properties 540540.02.1371 i 04/19/2013
ERD'(TST6049) Physical Properties 540540.11.13 11/19/2013
ERD(TST6049) Physical Properties 540540.03.14 I 03/26/2014
_ ERD(TST6049) Physical Properties 544870.04.14-2 04/02/2014
ERD(TST6049) Physical Properties 544870.04.14-3 04/02J2014
ERD`(TST6049) Physical Properties 544870.04.14-1 ;; l 04/10/2014
ERD'(TST6049) Physicai,Properties S44870.04.14-4 ! 0,4/10/2014
ERD'JTST6044) Physical Properties 543530.02:14-1-R1 05/14/2014
ERD(TST6049) Physical Properties S4353Q.0514 05/28/2014
ERD(TST6049) Physical Properties 540540.10:14 10/31/2014
ERD'(TST6049) Physical'Properties 507545.02.15 ;',i; 02/13/2015
ERD•(TST6049), Accelerated Weathering SC8520.04.15 05/27/2015
UL,LLC.(QUA9625) Quality Control Multi pie-Listing R16814 �ii 09/04/2015
UL,LLC.(QUA962S) Quality Control Service Confirmation Exp:10/16/2017
4. PRODUCT DESCRIPTION: I' i
4.1 Self-Adhenng.Underlavments: j
4.1.1 Tri-Built Sand=R SA.Shingle Underlayment is a self-adhering; glass-mat reinforced, sand-surfaced, SBS
modified bitumen roof underlayment,with a 36-inch'sheet width.
4-1.2 Tri-Built SIA HT TU Underlayment is a self-adhering, non-woven polyester fabric surfaced, SBS modified
bitumen roof underlayment I i'
� ;I
4.1.3 Tri-Built Smooth HT S/A Underlayment is a self-adhering,glass-mat reinfoirced,fila" surfaced,SB5 modified
bitumen roof underlayment.
S. LIMITATIONS:
5.1 This is a building code evaluation. Neither Trinity{ERD nor Robert Nieminen, R'.E. are, in any way, the
Designer of Record for an p
i g y project on which this Evaluation Report,or.', reviousIi version s thereof,is/was
used for permitting or design guidance unless retained specifically for that purpose.
r
5.2.. This Evaluation Report is not for-use in the HVHZ. t
5.3 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing Materials
t Directory for fire ratings of this product, i i
Exterior Research and Design,LLC Evaluavan ReP,0n AQZ960.10.12-R3
tertl7kateofAofhorlration#9503 �I I FL16048-R3
Revision 3:10/08/2015
f+' Page 2 of 5
' I
I
i
I;
i
TRINITY ERD
5-4 TRI-BUILT Roof-Underlayments may be used with any prepared roof cover where the product.is specifically
referenced within FBC approval documents. If not listed,a request may be made to the AHI for approval
based on-this evaluation combined with supporting data for the prepared roof icovering.
5.5 Allowable roof covers applied atop the underlayments are as follows: ,
TAs1 E 1: ROOF COVER OPTIONS
Underlayment
Asphalt Wood Shakes Slate
Nail-On Tile Foam-On Tile Metal ge Shingles
les
�;
T%ri-Built Sand-11 SA Shingle yes No No No i,i n; Yes Yes
Underlayment f j
Tri-Built S/A HT TU YesI(
PUniayment YesYes See 5.5.1Yes Yes Yes
ilt Smooth HT S/A Yes Na NoYes Yesi Yes
Underlayirient i
I
5.5.1 "Foam-On Tile" is limited to use of the following Approved the adhesives unless tensile adhesion/long
term aging data from an accredited testing laboratory is provided. ( "
i+ Tri-Built S/A HT TU Underlayment with 3M'2-Component Roof Tile Adhesive AH-1'60(FL6332)or Dow
TileBond' Roof Tile Adhesive(FL717) `
5.6 Allowable substrates are noted below:
5.6,1. Direct-Bond to Deck:
Tri-Built Sand-R SA Shingle Underlayment,Tri-Built S/A HT TU Underl6yment or Tri-Built Smooth HT S/A
Underlayment applied to:
k plywood; ASTM D41 primed plywood; OSB; ASTM D41 primed OSB; ASTM D41 primed structural
concrete,
While not required over plywood,OSB or Southern Yellow Pine substrates,TRI-BUALT recommends priming
the deck if the final roof cover is not slated for installation within 24 hours i i Note:1TRI-BUILT requires
tongue-and-groove board decking be covered, with plywood or OSB prior to installation of the self-
adhering underlayment. I
i 5.6.2 Bond to-Insulation:
Tri-Built S/A HTTU Underlayment applied to: 6
x>• Dens Deck Prime;S€CUROCK Gypsum-Fiber Roof Board, +
a
For installation under mechanically attached prepared roof coverings, insulation shall be attached per
minimum requirements of the prepared roof covering manufacturer's Oroduct Approval. For installations
under foam-on the systems,insulation attachment shall be designed by'a qualified design professional and
installed based on testing of the insulation/underlayment system in accordance With FM 4474,Appendix D
or TAS 114,Appendix 1.
' 5.6.3 Bond to Mechanically Attached,Base Laver:
� ^r
ASTM D226,Type 1 or tl felt.
For installations under mechanically attached prepared roof coverings, base layer shall be attached per
minimum codified requirements. For installations under foam-on the systems,base layer shall be attached
y per minimum requirements of FRSA/TRI April 2012(04-12). 1
i
Exterior Research and Design,LLC. Evaluation Report A4296610.12-R3
CerdfkateofAudwrlration#9503 I' F1.26048-1131
RI ision 3:16108/2015
k Page 3 of's
i';I i
I 1
TRINITY-.ERD
5.6.4 Wind Resistance for Underlayment Systems in Foam-On Tile Amlications: FRSA/TRI April 2012 (04-12)
does not address wind uplift resistance of all underlayment systems beneath foam-on the systems,where
the underlayment forms part of the load-path. The following wind uplift limitations'iapply to direct-deck
underlayment systems that are not addressed in FRSA/TRI April 2012'(04-12)and are used in foam-on the
applications. Maximum Design Pressure is the result of testing for wind:;load resistance based on
allowable wind loads,and reflects the ultimate passing pressure divided by 21(the 2 to 1 margin of safety
per FBC 1504.9 has already been applied). Refer to FBC 1609 for determinationlaf desi
I' gn wind pressures.
i
5.6.4.1 Maximum Design Pressure=-45.0 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHI.
Primer: (Optional)ASTM D41
Underlayment: Tri-Built S/A HT TU Underlayment,,self-adhered. "
5.7 Ex oosure Limitations: j
5.7.1 Tri-Built Sand=R SA Shingle Underlayment or Tri-Built Smooth HT S/A Underlayment shall not be left
exposed for longer than 30-days after installation f
5.7.2 Tri-Built S/A HT TU Underlayment shall not be left exposed for longer than 180-d6ys after installation.
S. INSTALLATION: �I
6.1 TRI-BUILT Roof Underlayments shall be installed in accordance with TRI-B ILT published installation
requirements subject to the Limitations set forth in Section 5 herein and the specifics noted below.
6.2 Re-fasten any loose decking panels, and check for protruding nail heads. Sweep,the substrate thoroughly
to remove any dust and debris prior to application,and prime the substrate(if applicable).
6:3 Tri-Built Sand-R SA Shinale Underlayment,Id-Built S/A HT TU Underlayment or Tri-guilt Smooth HT SLA
Underlayment:
6.3.1 Shall be Installed in compliance with the requirements for ASTM D1970 underlayment in FBC Sections
1507 for the type of prepared roof covering to be installed
6.3.2 Non-Tile applications:
While priming is optional,TRI-BUILT recommends griming the deck if the final roof cover is not slated for
installation within 24 hours. E
Apply sheet parallel to the roof edge. Roll out approximately 10 ft of membrane and peel back the first 3.
ft of release film.
Adhere the exposed part to the substrate and unroll the remaining membrane a�'far as possible.
Once the entire length of membrane is in place, peen-off the release film dla"onaiiyj He holding the
I membrane tight. Firmly roll the membrane into place to achieve.a bond.
Horizontal seams should be minimum 3-inches, configured to shed water. v`'Rical seams should be 6-
j inches and staggered not less than 2-ft from vertical seams in the course below!l Ail over-granule end-laps
shall be sealed using either heat-welding or hot air welding techniques.
� 4
When installing.at slopes above 8:12, Allied Building Products Corp;recommendsack-nailing in the
overlap area at the top of the sheet at 12-inch o.c.
For valleys and Ridges: Cut underlayment into 4 to 6 foot lengths.Peel the release paper and.center sheet
over valley or ridge. Drape and press sheet into place, working from the centeri,of the valley or ridge in
each direction. For valleys,apply the sheet starting at the lowest point and workupward.
6.3.3 Tile Applications ITH-Built S/A HTTU Underlayment only):
Reference its made to FRSA/TRI April 2012 (04-12) Installation Manual and gable 11 herein, using the
instructions noted above as a guideline. i
Tile shall be loaded and staged in a manner that prevents tile slippagei:;and/or damage to the
underlayment.
rIr '
J!, j
Exterior Research and Design,LLQ Evaluation Report A42960.14.12-R3
Cerdfkate of Authorization#9503FL16048-R3
i
Revision 3:10/08/2015
Page 4of5
I'
j
II. 1�
I
: T
I
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly,evaluate the installation of
this product.
8. MANUFACTURING PLANTS:
Contact the noted QA agency for information on product locations covered for F.A.C.Ruled§N 3 CiA requirements.
9: QUALITY ASSURANCE ENTITY:
UL,LLC--QUA9625;(314)578-3406;it.chanceilor@us.ul.com
-END OF EVALUATION REPORT-
,i.
I
3
Exterior Research and Design,I.I.C. EvaluaElon Report AQ960.10.12-R3
C t
teK7Jkate of Authorization NOW l F116048-113!' Revision 3-10/0812025
i Page 5 of 5