HomeMy WebLinkAboutProduct Approval (2) Florida Building Code Online Page 1 of 3
SCIS Home log In User Registration Hot Topics Submit Surcharge Stats&Facts Publications FBC Stag BCIS Site Map Links Search
Florida
t r Product Approval
IUSER:Public user
Product Approval Menu>Product or Application Search>A li i n i plication Detail RECEIVE D
FL# FL14088-R8
Application Type Affirmation FEB 0 9 2018
Code Version 2017
Application Status Approved ST. LUCle County, Plarmitting
Comments
Archived
Product Manufacturer JELD-WEN
Address/Phone/Email 3737 Lakeport vd
Klamath Falls, 97
1LE COP
(800)535-3936
fbcl@jeld-wen.com
Authorized Signature Jason Kantola
fbcl@jeld-wen.com
Technical Representative JELD-WEN Corporate Customer Service
Address/Phone/Email 3737 Lakeport Blvd.
Klamath Falls,OR 97601
(800)535-3936
customerserviceagents@jeld-wen.com
Quality Assurance Representative
Address/Phone/Email
Category Windows
Subcategory Fixed
Compliance Method Certification Mark or Listing
Certification Agency National Accreditation&Management Institute
Validated By National Accreditation&Management Institute
Referenced Standard and Year(of Standard) Standard Year
TAS 201 1994
TAS 202 1994
TAS 203 1994
Equivalence of Product Standards
Certified By
I affirm that there are no changes in the new Florida
Building Code which affect my product(s)and my product(s)
are in compliance with the new Florida Building Code.
Documentation from approved Evaluation or Validation Entity Yes No N/A
https://floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtGLR%2byCBy 1 JpzL... 2/9/2018
Florida Building Code Online Page 2 of 3
Product Approval Method Method 1 Option A
Date Submitted 08/15/2017
Date Validated 08/15/2017
Date Pending FBC Approval
Date Approved 08/16/2017
Summary of Products
FL# Model,Number or Name Description
14088.1 Premium Atlantic Vinyl Fixed(8300) 52.125'x 75"Insulated Glass(3/16 in-3/16
out Annealed)
Limits of Use Certification Agency Certificate
Approved for use in HVHZ:Yes FL14088 R8 C CAC NI011678-Rl.pdf
Approved for use outside HVHZ:Yes Quality Assurance Contract Expiration Date
Impact Resistant:No 08/30/2025
Design Pressure: +55/-55 Installation Instructions
Other:Windows with insulated glass units wider than 36" FL14088 R8 11 DP-
require setting blocks. Miami-Dade NOAs: Quanex Building 55 52.125x75 Installation Instructions.pdf
Products, Inc PVC(12-1017.02 and 13-0425.15). Verified By: Hermes Norero 73778
Created by Independent Third Party: Yes
Evaluation Reports
FL14088 R8 AE PER3111.pdf
Created by Independent Third Party: Yes
14088.2 Premium Atlantic Vinyl Fixed (8300)52.125'x 75"Insulated Glass(3/16 in -3/16
out Tempered)
Limits of Use Certification Agency Certificate
Approved for use in HVHZ:Yes FL14088 R8 C CAC NI011677-Ri.odf
Approved for use outside HVHZ:Yes Quality Assurance Contract Expiration Date
Impact Resistant: No 08/30/2025
Design Pressure: +65/-65 Installation Instructions
Other:Windows with insulated glass units wider than 36" FL14088 R8 II DP-
require setting blocks. Miami-Dade NOAs: Quanex Building 65 52.125x75 Installation Instructions.odf
Products, Inc PVC(12-1017.02 and 13-0425.15). Verified By: Hermes Norero 73778
Created by Independent Third Party: Yes
Evaluation Reports
FL14088 R8 AE PER3110.0
Created by Independent Third Party: Yes
14088.3 Premium Atlantic Vinyl Fixed(8300) 52.125'x 75"Insulated Glass(5/16 PVB Lam
in-3/16 Annealed out)
Limits of Use Certification Agency Certificate
Approved for use in HVHZ:Yes FL14088 R8 C CAC NI011699-R1.pdf
Approved for use outside HVHZ:Yes Quality Assurance Contract Expiration Date
Impact Resistant:Yes 09/30/2025
Design Pressure: +55/-55 Installation Instructions
Other:Windows with insulated glass units wider than 36" FL14088 R8 II DP-
require setting blocks.These windows do not meet small 55 52.125x75 Impact LMI Installation Instructions odf
missile impact wind-borne requirements as required by FBC, Verified By: Hermes Norero,PE 73778
section 2411.3.3.7 when the exterior lite is annealed.These Created by Independent Third Party: Yes
windows meet small missile impact wind-borne protection Evaluation Reports
requirements as required by FBC,section 2411.3.3.7 when FL14088 R8 AE PER3109.0
the exterior lite is tempered. Miami-Dade NOAs: Quanex Created by Independent Third Party: Yes
Building Products, Inc PVC(12-1017.02 and 13-0425.15),
Dupont PVB Interlayer(13-0129.27).
14088.4 Premium Atlantic Vinyl Fixed (8300) 52.125'x 75"Insulated Glass(5/16 SGP Lam
in-3/16 Tempered out)
Limits of Use Certification Agency Certificate
Approved for use in HVHZ:Yes FL14088 R8 C CAC N1011747-Ri.pdf
Approved for use outside HVHZ:Yes Quality Assurance Contract Expiration Date
Impact Resistant:Yes 11/30/2025
Design Pressure: +65/-65 Installation Instructions
Other:Windows with insulated glass units wider than 36" FL14088 R8 II DP65-65 52.125 x
require setting blocks.These windows do not meet small 75 LMI Installation Instructions.odf
missile impact wind-borne requirements as required by FBC, Verified By: Hermes Norero,PE 73778
section 2411.3.3.7 when the exterior lite is annealed.These Created by Independent Third Party: Yes
windows meet small missile impact wind-borne protection Evaluation Reports
requirements as required by FBC,section 2411.3.3.7 when FL14088 R8 AE PER3112.0
the exterior lite is tempered.Miami-Dade NOAs: Quanex Created by Independent Third Party: Yes
Building Products,Inc PVC(12-1017.02 and 13-0425.15),
Dupont SentryGlas Interlayer(11-0624.02).
Back Next
https://floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgtGLR%2byCBy 1 JpzL... 2/9/2018
Florida Building Code Online Page 3 of 3
Contact Us::2601 Blair Stone Road.Tallahassee FL 32399 Phone:B50-487-1824
The State of Florida is an AA/EEO employer.Coovriah[2007-2013 State of Florida.::Privacy Statement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released In response to a public-records request,do not send
electronic mall to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.-Pursuant to
Section 455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address if
they have one.The emails provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to
supply a personal address,please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under
Chapter 455,F.S.,please click here_.
Product Approval Accepts:
® F�--1 .chKt
Credit Card
Safe
https://floridabuilding.org/vr/pr app_dtl.aspx?param=wGEVXQwtDgtGLR%2byCByIJpzL... 2/9/2018
NOTICE OF PRODUCT CERTIFICATION
Kip CEpTiFjCgh
A( kk CERTIFICATION NO: NIO11699-R1
r
4 DATE: 10/30/2013
Irma I CERTIFICATION PROGRAM: Structural
°. COMPANY: JELD-WEN
CODE: 1822-1
la '9rip� P� � REVISION DATE: 06/10/2017
To verify that the"Notice of Product Certification"is valid,please visit www.NAMICertification.com to assure that the
product is active and currently listed.This certification represents product conformity to the applicable specification and
that certification criteria has been satisfied. ANAMI approved certification label must be applied to the product to claim
certification status. Please review and advise NAMI if any corrections are required to this document.
COMPANY NAME AND ADDRESS PRODUCT DESCRIPTION
JELD-WEN "8300" Premium Atlantic Vinyl
3737 Lakeport Boulevard Fixed Window (Impact)
Klamath Falls, OR 97601
Configuration:O
Glazing:IG-3/16"Annealed Glass/Laminate-1/8"
Annealed Glass/0.090"DuPont PVB Interlayer/1/8"
Annealed Glass
Frame: W-1323mm(52.12") H-1905mm(75.00")
DLO: W-1231mm(48.50") H-1816mm(71.50")
SPECIFICATION PRODUCT RATING
TAS 201/202/203-94 Design Pressure: 2633 Pa (55 psi)
Negative Design Pressure: 2633 Pa(55 psf)
Large Missile Impact Rated
Product Tested By: National Certified Testing Laboratories
Report No: NCTL-210-3909-01
Expiration Date: September 30,2025
Administrator's Signature:
NATIONAL ACCREDITATION AND
MANAGEMENT INSTITUTE, INC.
4794 George Washington Memorial Highway
Hayes,VA 23072
Tel: (804) 684-5124/ Fax: (804) 684-5122
398 East Dania Beach Blvd.
BUILDING DROPS Suite 338
® A Perfect Solution in Every Drop Dania Beach, FL 33004
954.399.8478 PH
Certificate of Authorization:29578 954.744.4738 FX
contact@ buildingdrops.com
Product Evaluation Report
Of
JELD-WEN, inc.
Premium Atlantic Vinyl
Impact Fixed Window
for
Florida Product Approval
Report No. 3109
Current Florida Building Code
Method: 1 —A (Certification)
Category: Windows
Sub — Category: Fixed
Product: Premium Atlantic Vinyl
Impact Fixed Window
Material: PVC
Product Dimensions: 52.125"x 75"
Prepared For:
JELD-WEN, inc.
3737 Lakeport Blvd.
Klamath Falls, OR. 97601
Prepared by: �.�` ES F.
Hermes F. Norero, P.E. k;Q` .••'"' " •F,A
Florida Professional Engineer#73778 ; O
Date: 08/12/2014 _ 7
Contents: T TCC Z
Evaluation Report Pages 1 —4 O ( pP,•' <v
�i
Digitally signed by Hermes F.Norero, P.E. ijljj11j1110`
Reason:I am approving this document
Date:2014.09.22 14:47:55-04'00' Hermes F. Norero, P.E.
Florida No. 73778
BUILDING DROPS
2/2014
A Perfect Solution in Every Drop Date: 0
Report No:o: 31 31099
Certificate of Authorization:29578
Manufacturer: JELD-WEN, inc.
Product Category: Windows
Product Sub-Category: Fixed
Compliance Method: State Product Approval Method (1)(a)
Product Name: Premium Atlantic Vinyl Impact Fixed Window
52.125"x 75"
Scope: This is a Product Evaluation Report issued by Hermes F. Norero, P.E. (FL#73778)for JELD-WEN,inc.
based on Method 1a of the State of Florida Product Approval, Department of Business and
Professional Regulation - Florida Building Commission.
Hermes F. Norero, P.E. does not have nor will acquire financial interest in the company
manufacturing or distributing the product or in any other entity involved in the approval process of
the product named herein.
This product has been evaluated for use in locations adhering to the current Florida Building Code.
See Installation Instructions NCTL210-3909-1-FBC, signed and sealed by Hermes F. Norero, P.E. (FL#
73778)for specific use parameters.
Limits of Use:
1. This product has been evaluated and is in compliance with the current Florida Building Code,
including the "High Velocity Hurricane Zone" (HVHZ).
2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment into
substrate material shall be beyond wall dressing or stucco.
3. When used in areas requiring wind borne debris protection this product complies with
Section 1609.1.2 of the current Florida Building Code and does not require an impact
resistant covering.
5. Site conditions that deviate from the details of drawing NCTL210-3909-1-FBC require further
engineering analysis by a licensed engineer or registered architect.
6. See Installation Instructions NCTL210-3909-1-FBC for size and design pressure limitations.
Hermes F. Norero, P.E.
Florida No.73778
Page 2 of 4
BUILDING DROPS
2/2014
A Perfect Solution in Every Drop Date: 0
Report No:o: 31 31099
Certificate of Authorization:29578
Certification Agency: The manufacturer has demonstrated compliance of products in accordance with the
Florida Building Code for manufacturing under a Certification Agency through
National Accreditation &Management Institute (FBC Organization#CER1773).
Performance Standards: The product described herein has been tested per:
• TAS 201-94
• TAS 202-94
• TAS 203-94
Referenced Data:
1. Product Testing performed by National Certified Testing Laboratories
(FBC Organization# TST1589)
Report#: NCTL-210-3909-01 Report Date: 09/30/2013
2. Certification Agency
National Accreditation &Management Institute
(FBC Organization#CER1773)
3. Material Certification
Miami Dade RER—Product Control Section NOA
E.I. DuPont De Nemours& Co., Inc.: PVB Interlayer
4. Material Certification
Miami Dade RER—Product Control Section NOA
Quanex Building Products: PVC Extrusions
Hermes F. Norero, P.E.
Florida No.73778
Page 3 of 4
BUILDING DROPS
Date: 0
A Perfect Solution in Every Drop Report No:o: 31 31099
Certificate of Authorization:29578
installation: 1. Approved anchor types and substrates are as follows:
Nailing Fin Installation:
A. For two by(2X) wood frame substrate (Min. S.G. =0.42), use#10 Wood Screw type wood
frame anchors of sufficient length to achieve minimum embedment of 1.50" into wood
framing.
Through Frame Installation:
A. For two by(2X) wood buck substrate (Min.S.G. =0.42), use#10 Wood Screw type
installation anchors of sufficient length to achieve a minimum embedment of 1.50" into
the wood substrate.
B. For concrete (Min.f c=3000 psi) or masonry (Conforms to ASTM C90) substrate where
one by(IX), non-structural, wood bucking is employed, use 3/16"diameter ITW Tapcon
type concrete screw anchors of sufficient length to achieve minimum embedment of
1.25" into concrete or masonry.
C. For concrete (Min.f'c=3000 psi) or masonry (Conforms to ASTM C90) substrate where
wood bucking is NOT employed, use 3/16"diameter ITW Tapcon type concrete screw
anchors of sufficient length to achieve minimum embedment of 1.25" into concrete or
masonry.
D. For steel stud substrate (Min 18 Ga., Fy=33 ksi), use#10 ITW TEK Screw type steel stud
anchors of sufficient length to achieve minimum 3 threads penetration beyond steel
structure.
Refer to Installation Instructions (NCTL210-3909-1-FBC) for anchor spacing and more details of the
installation requirements.
Design Pressure:
Design Pressure Rating
Positive 55 PSF
Negative 55 PSF
Hermes F. Norero, P.E.
Florida No. 73778
Page 4 of 4
�,i•O,. FROM
WX NAIL FIN INSTALLATION
CORNOM
i V 2"MIN.EMBEDMENT
2 zx WOOD FRAME MIN.DISTANCE
FOR EDGE 3/4"
15.5'O.C. MIN.DISTANCE
MAL TARO FOR EDGE_3/4" 2X WOOD
nN FRAME 3
1/4"MAX 3
SHIM SPACE
2 1/4"MAX
FRAME SECTION(TYP) SHIM SPACE
VERTICAL SECTION
uDTE:ldlkMMen lbiry Fbged WmE Opvang SII
1112"MIN.
zz.o �..� EMBEDMENT
2.0 mm
50mm 3.Omm
F GLASS BITE 1
13.0 mm
DOW 995
GLAZING DETAIL JAMB SECTION(TYP)
HORIZONTAL SECTION
NOTE'.Caulk between Wiling Flange 6 Wood Opening.
1/4"MAX
SHIM SPACE 3
MIN.DISTANCE
FOR EDGE3/4"
2X WOOD FRAME Max Frame OP RATING IMPCACCT
-WM M WUM(52.125-0L)� ' 11/2"MIN.EMBEDMENT 52 1/O X 75 +55/-55 YES
TYPICAL ELEVATION WITH FASTENER SPACING
Installation Notes: General Notes:
1. Seal flange/frame to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria
2. Use#10 PH or greater fastener though the nail fin with sufficient length to penetrate a minimum of 1 of the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
1/2"into the wood framing. For 2X wood frame substrate(min.S.G.=0.42). Building Code(FBC)including HVHZ and the industry requirement for the stated conditions.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 2. All glazing shall conform to ASTM E1300.
to the structure, The host structure is the responsibility of the architect or engineer of record for the 3. At minimum,glazing shall be 5mm annealed-10mm airspace-3mm annealed-2mm PVB by
project of installation. DuPont-3mm annealed.
Digitally signed by Hermes F.Norero,P.E. 4. Use structural or composite shims where required.
Reason:I am approving this document 5. Installation methods can be interchanged within the same opening.
Date:2013.11.2712:26:25-05'00' 6. An impact protective system is not required where wind borne debris protection is mandated by local
This schedule addresses only the fasteners required to anchor the building code.
window to achieve the rated design pressure up to the size limitations �"X� �� Maximum sizes are buck sizes and do not include fin or flange.
noted. It is not intended as a guide to the installation process and does �� �� PROJECT ENGINEER: DATE:
` " JE1DrWEN 3737 Lakeport Blvd
not address he sealing consideration that may arise in different wall F'` .• F i� -- 10/14/2013
'A • Klamath Falls,OR.97601
conditions. For the complete installation procedure,see the instructions . .Z ;'�� � � DRAWN BY: SCALE:
packaged with the window or go to7 D.Vezo NTS Phone: (541)882-3451
www.jeld-wen.com/resources/installation.
CHECKED
Kantola TITLE:
DISCLAIMER: T T APPROVED BY: Premium Atlantic Vinyl Impact Fixed Window
This drawing and its contents are confidential and are not to be 0,� '•. OP': 143
PART PRo ECT No.: Nail Fin Installation (52.125"x 75")
reproduced or copied in whole or in part or used or disclosed to others 0 8 46i
except
except as authorized by JELD-WEN Inc. 998 Two
w 338 IDENTIFIER No. PLANT NAME AND LOCATION: CAD DWG.No.: REV: SHEET
° NCTL210-3909- -FBC �� I OF 4
THROUGH FRAME
1MAX. O.C. FR4.• MIN.DISTANCE
j � rt-----�—r FOR EDGE:3/4" 3 INSTALLATION
2
1112"MIN. j
EMBEDMENT
f i.1f'O.C.
-MAX IM 11/2"MIN.
FRAME 1 1/4"MAX EMBEDMENT
SHIM SPACE 1/4"MAX
SHIM SPACE
FRAME SECTION(TYP) 3
VERTICAL SECTION
I
22.0 mm
2.0 mm
5.0 mm 30— MIN.DISTANCE 1
FOR EDGE:3/4"
GLASS BITE
13.0 mm 1
DOW 995 JAMB SECTION(TYP)
' GLAZING DerAn HORIZONTAL SECTION
' 1/4"MAX j
SHIM SPACE
3
2 1112"MIN.
EMBEDMENT Max Frame I OP RATING IMPACT
WWW"�DTM(52.125"MM) 52 1/8 x 75 +55/-55 YES
MIN.DISTANCE
TYPICAL ELEVATION WITH FASTENER SPACING FOR EDGE:3/4"
Installation Notes: General Notes:
1. Seal flange/frame to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria
2. Use#10 PH or greater fastener though the frame with sufficient length to penetrate a minimum of 11/2" of the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
into the wood framing. For 2X wood frame substrate(min.S.G.=0.42). Building Code(FBC)including HVHZ and the industry requirement for the stated conditions.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 2. All glazing shall conform to ASTM E1300.
to the structure. The host structure is the responsibility of the architect or engineer of record for the 3. At minimum,glazing shall be 5mm annealed-10mm airspace-3mm annealed-2mm PVB by
project of installation. DuPont-3mm annealed.
4. Use structural or composite shims where required.
5. Installation methods can be interchanged within the same opening.
6. An impact protective system is not required where wind borne debris protection is mandated by local
This schedule addresses only the fasteners required to anchor the building code.
window to achieve the rated design pressure up to the size limitations ������� Maximum sizes are buck sizes and do not include fin or flange.
noted. It is not intended as a guide to the installation process and does �� PROIECr ENGINEER: DATE:
not address he sealing consideration that may arise in different wall ��� Q' 9T '�
�` �i� -- 11/11/20 3 JELI
3737 Lakeport Blvd
'A EN Klamath Falls,OR.97601
conditions. For the complete installation procedure,see the instructions . ;'�,� i DRAWN BY: SCALE:
packaged with the window or go to D.Vezo NTS Phone: (541)882-3451
CHECKED BY: TITLE:
www.jeld-wen.com/resources/installation. = * � * — ]. Kantola
DISCLAIMER: = T = APPRovED BY: Premium Atlantic Vinyl Impact Fixed Window
This drawing and its contents are confidential and are not to be %� 441
0••"•. 441 PART PRo ECT No.: Through Frame Installation (52.125"x 75")
reproduced or copied in whole or in part or used or disclosed to others i ��� D60�461
except as authorized by JELD-WEN Inc. 398 "•P IDENTIFIER No. PLANT NAME AND LOCATION: CAD DWG.No.: REV: SHEET
NCTL210-3909- -FBC �O 20F4
14.S75"O.C. 4.5-MAX IN.DISTANCE MASONRY INSTALLATION
MAX.THRU FROMFOR EDGE:2112"
FRAME CORNERS MASONRY
2 dad BLOCK
1/4'MIN.
EMBEDMENT
163-O.C.
MAX.THRU
FRAME i
11/4"MIN.
t
1/4"M X !I EMBEDMENT
SHIM SPACE
3 1/4"MAX
'v SHIM SPACE
FRAME SECTION(TMP) MIN.DISTANCE
X VERTICAL SECTION FOR EDGE:2 1/2" a
22.0 mm
zo mm 2 a
50mm 30mm •p
MASONRY
BLOCK
GLASS BITE 517i
130mm
JAMB SECTION(TYP)
DOW 995 j HORIZONTAL SECTION
BLAZING DETAIL
1/4'MAX
SHIM SPACE
4 211/4"MIN.
EMBEDMENT Max Frame IM
OP RATING PACT
RY
WWW w +(MI25- "�� .BOCK WE� MAX.) MIN. 52 1/8 x 75 +55/-55 YES
TYPICAL ELEVATION WITH FASTENER SPACING FOR EDDGEIS:T2A1/2" J
Installation Notes: General Notes:
1. Seal flange/frame to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria
2. Use 3/16"Tapcon or equivalent fasteners through frame with sufficient length to penetrate a minimum of the adopted International Building Code(ISC),the International Residential Code(IRC),the Florida
of 1 1/4"into concrete or masonry at each location with a 21/2"min from edge distance.For concrete Building Code(FBC)including HVHZ and the industry requirement for the stated conditions.
(min.fc=3000psi)or masonry substrate(CMU shall adhere to ASTM C90). 2. All glazing shall conform to ASTM E1300.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 3. At minimum,glazing shall be 5mm annealed-10mm airspace-3mm annealed-2mm PVB by
to the structure. The host structure is the responsibility of the architect or engineer of record for the DuPont-3mm annealed.
project of installation. 4. Use structural or composite shims where required.
5. Installation methods can be interchanged within the same opening.
6. An impact protective system is not required where wind borne debris protection is mandated by local
This schedule addresses only the fasteners required to anchor the building code.
window to achieve the rated design pressure up to the size limitations %%**���� 7. Maximum sizes are buck sizes and do not include fin or flange.
noted. It is not intended as a guide to the installation process and does �� i� PROJECT ENGINEER: DATE:
i 3737 Lakeport Blvd
not address he sealing consideration that may arise indifferent wall �� Q' ,.• ' � �� -- 10/14/2013
conditions. For the complete installation procedure,see the instructions :' : O DRAWN BY: SCALE;
r-�. EN Klamath Falls,OR.97601
packaged with the window or go to 7 _ D.Vezo NTS Phone: (541)882-3451
CHECKED BY: MLE:
www.jeld-wen.com/resources/installation. ). Kantola
DISCLAIMER: = T T / = APPROVED BY: Premium Atlantic Vinyl Impact Fixed Window
This drawingand its contents are confidential and are not to be i�O ( pP••' 4 - Masonry Installation (52.125"x 75")
PART PRO ECT No'
reproduced or copied in whole or in part or used or disclosed to others �i 0 ; 1�`_ 1 - 46f
except as authorized by JELD-WEN Inc. 398 '^I` > _ w W IDENTIFIER No. PLANT NAME AND LOCATION: CAD DWG.No.: REV: SHEET
NCTL210-3909- -FBC 001 3 OF 4
14.375.O.C. 4.5'MAX. Min.embedment '� STEEL INSTALLATION
MAX.THRU FROM of three threads
FRAME CORNERS
past frame 189"e min
Q Steel Stud -- -- -
10.3'O.C.
MAX.THRU
FRAME 1/4"MAX 1/4"MAX
t SHIM SPACE SHIM SPACE
Min.embedment2
FRAME SECTION(TYP) of three threads
VERTICAL SECTION past frame
22.0 mm 3
n 2 0 mm 18 gauge min
5.0 mm 3.0 mm Steel Stud
6LA55 BITE
130mm 1
DOW 995 JAMB SECTION(TYP)
GLAZING DETAIL HORIZONTAL SECTION
t 1/4"MAX
SHIM SPACE
3
2 18gaagemin Max Frame DP RATING IMPACT
"^NDON�aTM(5ztss' ) I Min, mbedment51eel5tud 52 1/8 x 75 +55/-55 YES
TYPICAL ELEVATION WITH FASTENER SPACING of three threads
Past frame
Installation Notes: General Notes:
1. Seal flange/frame to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria
2. For anchoring into metal framing use#10 TEK Self Tapping screws with sufficient length to achieve a of the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
minimum embedment of three threads past the frame thickness. Steel substrate min.18ga.,fy=33 ksi. Building Code(FBC)including HVHZ and the industry requirement for the stated conditions.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 2. All glazing shall conform to ASTM E1300.
to the structure. The host structure is the responsibility of the architect or engineer of record for the 3. At minimum,glazing shall be 5mm annealed-10mm airspace-3mm annealed-2mm PVB by
project of installation. DuPont-3mm annealed.
4. Use structural or composite shims where required.
5. Installation methods can be interchanged within the same opening.
6. An impact protective system is not required where wind borne debris protection is mandated by local
This schedule addresses only the fasteners required to anchor the building code.
window to achieve the rated design pressure up to the size limitations ����� ���i� 7. Maximum sizes are buck sizes and do not include fin or flange.
noted. It is not intended as a guide to the installation process and does �� �� PROJECT ENGINEER: DATE:
not address he sealing consideration that may arise in different wall ��� �c •.•''•• �` �i� -- 10/14/2013 JMDVEN 3737 Lakeport Blvd
•• 'A Klamath Falls,OR.97601
conditions. For the complete installation procedure,see the instructions .r:'�,� i DRAWN BY: SCALE;
packaged with the window or go to7 D.Vezo NTS Phone: (541)882-3451
CHECKED BY: TITLE:
www.jeld-wen.com/resources/installation. J. Kantola
DISCLAIMER: T T 44, APPROVED BY: Premium Atlantic Vinyl Impact Fixed Window
This drawingand its contents are confidential and are not to be i Steel Installation (52.125' x 75")
O PART PRO ECT NO'
reproduced or copied in whole or in part or used or disclosed to others ��� 0. a �` D60�461
except as authorized by JELD-WEN Inc. 398 938 IDENTIFIER No. PLANT NAME AND LOCATION: CAD DWG.No.: REV: SHEET
n 7 NCTL210-3909- -FBC OQ 40F4