HomeMy WebLinkAboutProduct ApprovalIAM
� MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) www•mianddade.eov/economy
Owens Corning Roofing and Asphalt, LLC
One Owens Corning Parkway
Toledo, OH 43659
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER - Product Control Section to be
used in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(in Miami -Dade County) and/or the AHJ (in areas other than Miami -Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami -Dade County Product Control Section that this product or material fails to meet the
requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Duration®, Duration® Premium, TruDefinition® Duration®, and TruDefinition® Duration®
Designer Colors Collection
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews NOA No. 12-0309.01 and consists of pages 1 through 6.
The submitted documentation was reviewed by Gaspar J Rodriguez.
r
APPROVED
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 1 of 6
ROOFING ASSEMBLY APPROVAL
Category:
Roofing
Sub -Category:
Asphalt Shingles
Materials:
Laminate
Deck Type:
Wood
SCOPE
This approves a roofing system using Owens Corning Duration® and Duration® Premium asphalt shingles
manufactured by Owens Corning as described in Section 2 of his Notice of Acceptance.
PRODUCT DESCRIPTION
Product
Dimensions
Test Specifications Product Description
Duration®
13 %4' x 39 3/s"
TAS 110 A heavy weight, fiberglass reinforced
Manufacturing Locations #1, 2
four tab asphalt shingle with
continuous bead of sealant.
Duration® Premium;
13 '/4" x 39 3/8"
TAS 110 A heavy weight, fiberglass reinforced
TruDefinition® Duration®;
four tab asphalt shingle with large nail
TruDefinition® Duration®
area with continuous bead of sealant.
Designer Colors Collection
Manufacturing Location #1, 2, 3, 4
Duration®
13 '/a" x 39 3/8"
TAS 110 A heavy weight, fiberglass reinforced
Manufacturing Location #1, 2, 3
four tab asphalt shingle with dashed
bead of sealant.
Duration® Premium;
13 '/4' x 39 3/8"
TAS 110 A heavy weight, fiberglass reinforced
TruDefinition® Duration®;
four tab asphalt shingle with dashed
TruDefinition® Duration®
bead of sealant.
Designer Colors Collection
Manufacturing Location #1, 2, 3, 4
MANUFACTURING LOCATION
1. Jacksonville, FL
2. Memphis, TN
3. Savannah, GA
4. Irving, TX
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 2 of 6
EVIDENCE SUBMITTED
Test Agency
Test Identifier
Test Name/Report
Date
PRI Asphalt Technologies, Inc.
OCF-157-02-01
TAS 100
10/26/10
OCF-102-02-01
TAS 100
11/12/07
OCF-156-02-01
TAS 100
10/26/10
OCF-163-02-01
TAS 100
12/10/10
OCF-164-02-01
TAS 100
12/10/10
OCF-098-02-01
TAS 100
02/22/07
OCF-099-02-01
TAS 100
02/26/07
OCF-102-02-01
TAS 100
11/12/07
OCF-172-02-01
TAS 100
05/26/11
OCF-179-02-01
TAS 100
02/02/12
Underwriters Laboratories, Inc.
07CA39536
TAS 107
11/11/07
03NK04954
TAS 107
03/28/03
03NK04954
TAS 107
03/11/03
1ONK13947
TAS 107
11/12/10
11CA15662
TAS 107
05/27/11
11NB21712
TAS 107
02/18/12
07CA02026
ASTM D 3462
01/26/07
12CA12180
ASTM D 3462
03/01/12
LIMITATIONS
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
fire ratings of this product.
2. Shall not be installed on roof mean heights in excess of 33 ft.
3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
and Rule 61 G20-3 of the Florida Administrative Code.
INSTALLATION
1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115.
2. Flashing shall be in accordance with Roofing Application Standard RAS 115
3. The manufacturer shall provide clearly written application instructions.
4. Exposure and course layout shall be in compliance with Detail W, attached.
5. Nailing shall be in compliance with Detail W, attached.
LABELING
1. Shingles shall be labeled with the Miami -Dade Seal as seen below, or the wording "Miami -Dade County
Product Control Approved".
MIAWDADE:,)UZNW
gm
NOA No.: 16-0425.01
WMAMI-DADECOUNWIS Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 3 of 6
BUILDING PERMIT REQUIREMENTS
Application for building permit shall be accompanied by copies of the following:
1.1 This Notice of Acceptance.
1.2 Any other documents required by the Building Official or the applicable code in order to properly
evaluate the installation of this system.
DETAIL A
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 4 of 6
DETAIL B
DURATION & TRUDEFINITION® DURATION®
(SEALANT MAY BE CONTINUOUS OR DASHED. NOT SHOWN IN THE DETAIL DRAWINGS)
Dc
m
mZ
m,
.0
O N
C
f0
Z N
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 5 of 6
MAXIMUM SLOPE 21:12
SLOPE GREATER TITAN 21:12
END OF THIS ACCEPTANCE
mW
r
NOA No.: 16-0425.01
Expiration Date: 07/19/21
Approval Date: 07/21/16
Page 6 of 6
Permit Search
Search Results
2/28/18, 11:44 AM
Displaying items 1 - 10 of 10
Town of Jupiter, FL: .10 DaO Ju( ,er :-L 3.3 ws 10=: - , 56 ;,l 74,6-5-34
"ccessib li`y , 'mp, nyees i Cop'/T ght
http://cds.jupiter.fl.us/EnerGov_Prod/CitizenAccess/Site/Permit/Search Page 1 of 1
1105
New- Single
99 -
OS -0002644-
000ST
CHEROKEE
Building (R)
Family
Closed -
03/14/2005
10/19/2005 04/25/2005
JUPITER,
Dwelling
HTE
FL 33458
1105
18-001565-
CHEROKEE
Roof-
oof-18-001565-
NOC
Roof (R)
Residential -
02/12/2018
08/11/2018
R F-
ST Jupiter, FL
Required
33458
Re Roof
1105
New- Single
-
18-020238-
CHEROKEE
Building (R)
'Family
Closed -
Cl
BLDR
ST Jupiter, FL
Jupiter,
Dwelling
Cancelled
3T
1105
New- Single
99-
94-00021 83-
CHEROKEE
Building (R)
Family
Closed -
06/23/1994
11/12/1995 05/16/1995
1 -BLDG
ST JUPITER,
Dwelling
HTE
FL 33458
1105
99 _
94-00021983-
CHEROKEE
Electrical (C)
Electrical
Closed
10/06/1994
04/30/1995 05/16/1995
1 ELEC
ST JUPITER,
HTE
FL 33458
Displaying items 1 - 10 of 10
Town of Jupiter, FL: .10 DaO Ju( ,er :-L 3.3 ws 10=: - , 56 ;,l 74,6-5-34
"ccessib li`y , 'mp, nyees i Cop'/T ght
http://cds.jupiter.fl.us/EnerGov_Prod/CitizenAccess/Site/Permit/Search Page 1 of 1
f
TR1ER
EVALUATION REPORT
Owens Corning
One Owens Corning Parkway
Toledo, OH 43659
(740)404-7829
EXTERIOR RESEARCH & DESIGN, I.I.C.
Certificate of Authorization #9503
353 CHRISTIAN STREET, UNIT #13
OXFORD, CT 06478
(203)262-9245
Evaluation Report 037940.02.12-R8
F1.10674-1113
Date of Issuance: 02/06/2012
Revision 8: 10/09/2017
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The
products described herein have been evaluated for compliance with the 6th Edition (2017) Florida Building Code
sections noted herein.
DESCRIPTION: Owens Corning Asphalt Roof Shingles
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted
herein and FBC 1507.2.7.1 / R905.2.6.1.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the
referenced Quality Assurance documentation changes, or provisions of the Code that relate to the product change.
Acceptance of this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. if the
product changes or the referenced Quality Assurance documentation changes. TrinityJERD requires a complete
review of this Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "Trinity IERD Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 8.
Prepared by:
Robert J.M. Nieminen, P.E.
Florida Registration No. 59166, Florida DCA ANE1983
The facsimile seal appearing was authorized by Robert
Nieminen, P.E. on 10/09/2017. This does not serve as an
electronically signed document.
CERTIFICATION OF INDEPENDENCE:
1. TrinitylERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. Trinity ERD is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither Trinity IERD nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any
project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
RINITYIERD
ROOFING SYSTEMS EVALUATION:
1. SCOPE:
Product Category: Roofing
Sub -Category: Asphalt Shingles
Compliance Statement: Owens Corning Asphalt Roof Shingles, as produced by Owens Corning, have demonstrated
compliance with the following sections of the 6a' Edition (2017) Florida Building Code and Florida Building Code,
Residential Volume through testing in accordance with the following Standards. Compliance is subject to the
Installation Requirements and Limitations / Conditions of Use set forth herein.
2. STANDARDS:
Section Property Standard Year
1507.2.5, R905.2.4 Physical Properties ASTM D3462 2010
1507.2.7.1, R905.2.6.1 Wind Resistance ASTM D3161 2016
1507.2.7.1, R905.2.6.1 Wind Resistance ASTM D7158 2011
3. REFERENCES:
ini!PL Examination Reference Date
UL LLC (CER9626) Physicals & Wind Resistance File R2453, Vol. 3 02/15/2007
UL LLC (CER9626) Physicals & Wind Resistance 20120516-R24S3 05/16/2012
UL LLC (TST9628) Physical Properties 06CA20263 04/18/2006
UL LLC (TST9628) Wind Resistance 11CA34308 02/18/2012
UL LLC (TST9628) Physicals & Wind Resistance 4786093137 02/01/2014
UL LLC (TST9628) Wind Resistance 4786126532 02/10/2014
UL LLC (TST9628) Physical Properties Classification letter 02/13/2014
UL LLC (TST9628) Physical Properties Classification letter 10/02/2015
Miami -Dade (CER1S92) FBC HVHZ Compliance Various NOAs Various
UL LLC (QUA9625) Quality Control Service Confirmation Exp. 05/16/2020
4. PRODUCT DESCRIPTION:
4.1 Asphalt Shingles:
4.1.1 Classic and Supreme* are fiberglass reinforced, 3 -tab asphalt roof shingles.
4.1.2 Berkshire* are fiberglass reinforced, 4 -tab asphalt roof shingles.
4.1.3 Devonshire'"" are fiberglass reinforced, 5 -tab asphalt roof shingles.
4.1.4 Duration*, TruDefinition* Duration Duration* Premium Cool, TruDefinition* Duration* Designer Color
Collection, Tru Definition*Oakridge , Oakridge* and WeatherGuard* HP are fiberglass reinforced, laminated
asphalt roof shingles.
4.2 Hip & Ridge Shingles:
4.2.1 Berkshire* Hip & Ridge Shingles, High Ridge, WeatherGuard* HP Hip & Ridge Shingles, ProEdge Hip & Ridge
Shingles and DuraRidgell Hip & Ridge Shingles are fiberglass reinforced, hip and ridge asphalt roof shingles.
4.3 Accessory Starter Strips:
4.3.1 Starter Strip Shingle, Starter Strip Plus and Starter Shingle Roll are starter strips for asphalt roof shingles.
S. LIMITATIONS:
5.1 This is a building code evaluation. Neither TrinityJERD nor Robert Nieminen, P.E. are, in any way, the
Designer of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used
for permitting or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in FBC HVHZ jurisdictions.
5.3 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing Materials Directory
for fire ratings of this product.
Exterior Research and Design, U.C. Evaluation Report 037940.02.12-R8
Certificate ofAutI104* t100 #9503 6'" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-1113
Owens Coming Asphalt Roof Shingles Revision 8:10/09/2017
Page 2 of 8
�E \iN TY ''.. ERV
5.4 Wind Classification:
5.4.1 All Owens Corning asphalt shingles noted herein are Classified in accordance with FBC Tables 1507.2.7.1
and R905.2.6.1 to ASTM D3161, Class F and/or ASTM D7158, Class H, indicating the shingles are acceptable
for use in all wind zones up to Vesd = 150 mph (V„lt = 194 mph). Refer to Section 6 for installation
requirements to meet this wind rating.
5.4.2 All Owens Corning hip & ridge shingles, Starter Strip Shingle and Starter Strip Plus noted herein are
Classified in accordance with FBC Tables 1507.2.7.1 and R905.2.6.1 to ASTM D3161, Class F, indicating the
shingles are acceptable for use in all wind zones up to Vasd =150 mph (V It = 194 mph). Refer to Section 6 for
installation requirements to meet this wind rating.
5.4.3 Classification by ASTM D7158 applies to exposure category B or C, as defined in FBC 1609.4.3, and a mean
roof height of 60 feet or less. Calculations by a qualified design professional are required for conditions
outside these limitations. Contact the shingle manufacturer for data specific to each shingle.
5.4.4 Refer to Owens Corning published information on wind resistance and installation limitations.
5.5 All products in the roof assembly shall have quality assurance audit in accordance with F.A.C. Rule 61G20-3.
6. INSTALLATION:
6.1 Under)avment:
6.1.1 Underlayment shall be acceptable to Owens Corning and shall hold current Florida Statewide Product
Approval, or be Locally Approved per Rule 614320-3, per FBC 1507.2.3, 1507.2.4 or R905.2.3.
6.2 Asphalt Shingles:
6.2.1 Installation of asphalt shingles shall comply with the Owens Corning current published instructions, using
minimum four (4) nails per shingle in accordance with FBC 1507.2.7 or R905.2.6, with the following
exceptions:
➢ Berkshire shingles require minimum five (5) nails per shingle.
WeatherGuard* HP shingles require minimum six (6) nails per shingle.
➢ Devonshire' shingles require minimum six (6) nails per shingle.
➢ Starter Strip Shingle and Starter Strip Plus require minimum five (5) nails per strip.
Refer to Owens Corning published information on wind resistance and installation limitations.
6.2.2 Fasteners shall be in accordance with the manufacturer's published requirements, but not less than FBC
1507.2.6 or R905.2.5. Staples are not permitted.
6.2.4 Where the roof slope exceeds 21 units vertical in 12 units horizontal, special methods of fastening are
required. See figures below for details.
6.2.5 Minimum Nailing — Starter Strip Shingle and Starter Strip Plus:
Feltunderlaymerrt
—Deck
Seif•adhered
WeatherLock°
%t underlayment
Drip
Drip edge
Nails located
2=3" from eave
Install first
Self-sealing adhesive
Starter Strip
positioned along save
shingle with
6" removed
Starter Ship shingly overhangs eaves and rakes',i"-§i"
Exterior Research and Design, LLC. Evaluation Report 037940.02.12-R8
Certifisaate ofAathorizotion 119503 6r" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-R13
Owens Coming Asphalt Roof Shingles Revision 8:10/09/2017
Page 3 of 8
6.2.6 Minimum Nailing — Classic's & Supreme:
Normal Mansard or Area pare
Wind Areas High Wind dasys»es y
Area pan vientos normalas Araas vientos fuertes
t`
IA) �. t" 2• til x•
zr
r
I
B"Exposuro
Exposicidn
6.2.7 Minimum Nailine — Berkshire's:
sealant strip
La Ura do sadsda
S Y " 9 Yt' 9 bY' t? Yf
ILI
1.
Standard Fastening Pattern
"TRINITY1, ERD
Normal Mansard or Ares para
Vliind Areas HighNtind d's""" y
Ana pars vianros normales Areas YhmZ fusriss
f
6 BIS" Exposure
Exposicidn
sealant strip
1 to tka de seBador
e - a 81R" a e Li
a .-.
r 8 iv
6 -Nail Fastening Pattern
seahM ship
is tka do *14dar
a4 -a� 'aaYtLYr s yr s Yt
t
1" Asphak roofing onawnt
Coowto de todtodoWOO
Mansard or Steep Slope Fastening Pattern
Exterior Research and Design, I.I.C. Evaluation Report 037940.02.12-118
Certifkate of Authorization ii9S03 6r" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-R13
Owens Coming Asphalt Roof Shingles Revision 8:10/09/2017
Page 4 of 8
6.2.8 Minimum Nailing — Devonshire'":
1=- iit.trT�iE
8- 7n
5^5/8" exposure Sedant location
Exposiaon de 5.5/8 puig llbkad6n del sdiador
Standard 6 -Nail Fastening Pattern
:'^g^'p
R 4ERD
- Nails
Ten 1" Spots of Asphalt Roof Cement
Mansard or Steep Slope Fastening Pattern
6.2.9 Minimum Nailing — Duration®, TruDefinition® Duration, Duration® Premium Cool & TruDefinition®
Duration* Designer Color Collection:
4 -Plait Fastening Pattern
StxeNai*ID fast W ell, area Swddi
Hsu TIV"
1 tr 1r
F1 F� F�
Standard Fastening Pattern
6 -Nall Fastening Pattern
aureNalta taatenina arw wvtlM
naq typuat
F1 ii, J
s•tro^ ss+a^ 'i
Fastening for Stopes Greater Than 21:12
fan
Snrdaasrsfa9tMiffaa"aWim
r- ras. ry
Mansard or Steep Slope Fastening Pattern
6 -Nail Fastening Pattern
Exterior Research and Design, I.I.C. Evaluation Report 037440.02.12-118
Certykate o/Authori:ation #95O3 6t" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-R13
Owens Coming Asphalt Roof Shingles Revision 8:10/09/2017
Page 5 of 8
TRINITY,ERD
6.2.1 Minimum Nailing —TruDefinition*Oakridge®,Oakridge®:
4 Nall Main
Esquenna con 4 clavas
1` Y"
ir
5518" ExposureNails 5 sAr Exposure
Exposiddnde55l$palg. Clavas Erposiddade5518putg.
Standard Fastening Pattern
6 Nail PAtsm
EsWema con 6 lows
r
5 sIr Expmfe layos 5 518" Expmle
Expt dddnde5518ptdg: ExposWndo551$pufg.
6 -Nail Fastening Pattern
Mansard or Steep Slope Fastening Pattern
6.2.1 Minimum Nailing — WeatherGuard® HP:
Exterior Research and Design, I.I.C.
Certijkate Of Authodration #9503
1
Evaluation Report 037940.02.12-R8
6'" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-1113
Owren Coming Asphalt Roof Shingles Revision 8:10/09/2017
Page 6 of 8
t
RINITY,ERD
6.3 Hip & Ridge Shingles:
6.3.1 Installation of Berkshire* Hip and Ridge Shingles, High Ridge, WeatherGuard* HP Hip and Ridge Shingles
and ProEdge Hip & Ridge Shingles shall comply with the Owens Corning current published instructions,
using four (4) nails per shingle. Installation of DuraRidgeTM Hip & Ridge Shingles shall comply with the
Owens Corning current published instructions, using two (2) nails per shingle. Refer to Owens Corning
published information on wind resistance and installation limitations, including the use of hand -sealing for
wind warranties.
6.3.2 Fasteners shall be in accordance with the manufacturer's published requirements, but not less than FBC
1507.2.6 or R905.2.5. Staples are not permitted.
6.3.3 Minimum Nailing — Berkshire® Hip & Ridge and High Ridge:
Fig. 2
Top'A— SN OO—
Naas Nets
,Er Topla "vid A
A" piece
I
1
1
�I
I
t
it St
al
ui
t
1
1
6.3.4 Minimum Nailing — WeatherGuard® HP Hip and Ridge:
Fig. A 4 a
41__ ptavapbg wkttl
Dlmdbn
A
Nails '---""-----y
A t
\\
., qty
1�.. I 1 I
Fig. C Hip S Ridge Shingle Fastening
TopVW
Nails Nails
2.. 2"
t" f`
.Iv
S' ExPosam
1 17
Exterior Research and Design, I.I.C. Evaluation Report 037940.02.12-118
CerWcote of Authorization #9503 6T" EDITION (2017) FBC NON-HVHZ EVALUATION F1.10674-1113
Owens Coming Asphah Roof Shingles Revision 8:10/09/2017
Page 7 of 8
6.3.5 Minimum Nailing - ProEdge Hip & Ridge Shingles:
Prevailing
Wind Direction strip
AV--' 8" Exposure
Fasten Ph"
Covet Exposed
Fasteners with
Roof Cement
Standard
Top Yew
Fastening
Pattern
I^ Yfata supertvr
12' 1
Seaunt
7 i'p
8" Exposure
N"
6.3.6 Minimum Nailing — DuraRidge' Hip & Ridge Shingles:
Note: The drawings below pertain to minimum, as -tested attachment requirements. Refer to Owens Corning
published installation instructions for their minimum requirements.
Praxaitng Wird Lziraedan
'� Diraatiandxnirtantaduaanc
Dincctn d*I visna pradomiwca
Naito
,as`y
7. LABELING:
7.1 Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted
herein.
7.2 Asphalt shingle wrappers shall indicate compliance with one of the required classifications detailed in FBC
Table 1507.2.7.1 / R905.2.6.1.
8. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of
this product.
9. MANUFACTURING PLANTS:
Contact the named QA entity for information on which plants produce products covered by Florida Rule 9N-3 QA
requirements.
10. QUALITY ASSURANCE ENTRY:
UL LLC— QUA9625 ; (631) 546-2458; Kanchi.Agrawala-Dokania@u(.com
- END OF EVALUATION REPORT -
Exterior Research and Design, U.C. Evaluation Report 037940.02.12-118
Certiftcate ofAathorkation #9303 6T" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-1113
Owens Coming Asphalt Roof Shingles Revision 8:10/09/2017
Page 8 of 8
Top Yew
Yae as pFaea
I^ Yfata supertvr
Cbl"
2W
N"
I
I
IE
to �
ala E
7. LABELING:
7.1 Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted
herein.
7.2 Asphalt shingle wrappers shall indicate compliance with one of the required classifications detailed in FBC
Table 1507.2.7.1 / R905.2.6.1.
8. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of
this product.
9. MANUFACTURING PLANTS:
Contact the named QA entity for information on which plants produce products covered by Florida Rule 9N-3 QA
requirements.
10. QUALITY ASSURANCE ENTRY:
UL LLC— QUA9625 ; (631) 546-2458; Kanchi.Agrawala-Dokania@u(.com
- END OF EVALUATION REPORT -
Exterior Research and Design, U.C. Evaluation Report 037940.02.12-118
Certiftcate ofAathorkation #9303 6T" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-1113
Owens Coming Asphalt Roof Shingles Revision 8:10/09/2017
Page 8 of 8