HomeMy WebLinkAboutProduct Approval RECEIVED
1"llAhl _._.__.. JUL 3 0 2018 MLOM-DARE COUNTY
PR DUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOIVIIC RESOURCES pmDucie County, Permitting 11805 SW 26 Street,Room 208
BOARD AND CODE ADMINISTRATION DIVISION " _ Miami,Florida 33175-2474
T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE (NOA) wwv.miamidade.gov/economy
Tamko Building Products,Inc.
P.O.Box 1404 'Y
Joplin,MO 64802 FILE COP
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials.The
documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below.The Miami-Dade County Product Control Section
(in Miami-Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right to have this product
or material tested for quality assurance purposes.If this product or material fails to perform in the accepted manner,the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke,modify,or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,if it is
determined by Miami-Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
This product is approved as described herein,and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION:TAMKO Elite Glass-Seal Roof Shingles
LABELING:Each unit shall bear a permanent label with the manufacturer's name or logo,city,state and following
statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any product,for
sales,advertising or any other purposes shall automatically terminate this NOA.Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed
by the expiration date may be displayed in.advertising literature. If any portion of the NOA is displayed,then
it shall be done in its entirety.
INSPECTION:A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews and revises NOA#17-0321.01 and consists of pages 1 through 5.
The submitted documentation was reviewed by Alex Tigera.
NOA No.: 18-0207.04
MLAWnaneCounrry Expiration Date:04/11/23
Approval Date:04/12/18
Page 1 of 5
ROOFING ASSEMBLY APPROVAL
Category Roofing
Sub-Category: Asphalt Shingles
Materials: 3-Tab
Deck Type: Wood
SCOPE
This approves a roofing system using Tamko Glass-Seal and Elite Glass-Seal Asphalt Shingles,manufactured by
Tamko Building Products,Inc.as described in this Notice of Acceptance.
PRODUCT DESCRIPTION
Product Dimensions Test Product Description
Specifications
Elite Glass-Seal 12"x 36" TAS 110 A heavy weight,3-Tab asphalt shingle.
Manufacturing
Location#1
Elite Glass-Seal 12-1/4"x 36" TAS 110 A heavy weight,3-Tab asphalt shingle.
Manufacturing
Location#1,2,3
MANUFACTURING LOCATION
1. Tuscaloosa,AL.
2. Frederick,MD.
3. Joplin,MO.
EVIDENCE SUBMITTED
Test Agency- Test Identifier Test Name/Report Date
Underwriters Laboratories,Inc. TAS-107 02NK9507 03/06/02
TAS 107 OINK40917 12/04/01
ASTM D 3462 82919/4787877649 03/08/17
ASTM D 3462 R2919/4787920690 01/26/18
ASTM D 3462 R2919/4787877649 05/23/17
PRI Construction Materials TAS-100 TAP-371-02-01 03/07/17
Technologies TAS-100 TAP-372-02-01 03/07/17
NOA No.: 18-0207.04
MArtananeCOUNW Expiration Date:04/11/23
Approval Date:04/12/18
Page 2 of 5
LIMITATIONS
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
fire ratings of this product.
2. Shall not be installed on roof mean heights in excess of 33 ft.
3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
Rule 61 G20-3 of the Florida Administrative Code.
INSTALLATION
1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115.
2. Flashing shall be in accordance with Roofing Application Standard RAS 115
3. The manufacturer shall provide clearly written application instructions.
4. Exposure and course layout shall be in compliance withDetail'A;attached.
5. Nailing shall be in compliance-with Detail 13;attached.
LABELING
Shingles shall bear the imprint or identifiable marking of the manufacturer's name or logo,city and state of
manufacturing facility,and following statement:"Miami-Dade County Product Control Approved"or the Miami Dade
County Product Control Seal as shown below.
MIAM-DADE COUNTY
,...• e
BUILDING PERMIT REQUIREMENTS:
Application for building permit shall be accompanied by copies of the following:
1. This Notice of Acceptance.
2. Any other documents required by Building Official or Applicable building code in order to properly evaluate the
installation of this material.
NOA No.: 18-0207.04
Mu►htaoane courtnr Expiration Date:04/11/23
Approval Date:04/12/18
Page 3 of 5
DETAIL A
COURSE LAYOUT
ELITE GLASS-SEAL
9TH COURSE All dimensions are in inches.
8TH COURSE
—4-
7TH COURSE 7TH COURSE
—a—
6TH COURSE 6TH COURSE
12 8
5TH COURSE 5TH COURSE
16 _11-
4TH COURSE 4TH COURSE
2D 16
3RD COURSE 3RD COURSE
24 21
2826
32 31
2ND COURSE 2ND COURSE
36 36
1ST COURSE 1ST COURSE
4"METHOD 5"METHOD
6TH COURSE
5TH COURSE
6
4TH COURSE
—12-
3RD COURSE
16
2ND COURSE
24
IST COURSE
30
36
6"METHOD
NOA No.: 18-0207.04
MIAMPDADECOUNW Expiration Date:04/11/23
Approval Date:04/12/18
Page 4 of 5
DETAIL B
OVERALL DIMENSIONS AND NAILING PATTERN
36"
Nail Zone
92" 3" 9" 3" 92"
46 40 12"
6-314-
5-1/2 5"Exposure
r
ELrrE GLAss SEAL
36"
Nail Zone 1"
1"
92' 3" 9" 3" 92"
12-1/4"
6-7/8"
5-5/8" 5-1/8"Exposure
ELITE GLAss SEAL
END OF THIS ACCEPTANCE
NOA No.: 18-0207.04
MIAMMADE COUNTY Expiration Date:04/11/23
Approval Date:04/12/18
Page 5 of 5