HomeMy WebLinkAboutProduct Approval- shiingles
NOA No.: 15-1215.10
Expiration Date: 12/01/20
Approval Date: 05/26/16
Page 1 of 6
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy
TAMKO Building Products, Inc.
220 West 4th Street
Joplin, MO 64801
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER -Product Control Section to be
used in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section
(in Miami-Dade County) and/or the AHJ (in areas other than Miami-Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the
requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: TAMKO Roof Shingles
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami-Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA No.15-0709.19 and consists of pages 1 through 6.
The submitted documentation was reviewed by Gaspar J Rodriguez.
NOA No.: 15-1215.10
Expiration Date: 12/01/20
Approval Date: 05/26/16
Page 2 of 6
ROOFING ASSEMBLY APPROVAL
Category: Roofing
Sub-Category: Asphalt Shingles
Materials: Laminate
Deck Type: Wood
SCOPE
This approves TAMKO’s Heritage, Heritage Woodgate and Heritage Premium asphalt shingles, manufactured by
TAMKO Building Products, Inc., as described in this Notice of Acceptance and designed to comply with the Florida
Building Code High Velocity Hurricane Zones.
PRODUCT DESCRIPTION
Product Dimensions Test
Specifications
Product Description
Heritage
Manufacturing Location # 1, 2, 3
13 ¼" x 39 3/8" TAS 110 Dimensional asphalt shingle.
Heritage Woodgate
Manufacturing Location # 1,3
13 ¼" x 39 3/8" TAS 110 Dimensional asphalt shingle.
Heritage Premium
Manufacturing Location # 1, 2, 3
13 ¼" x 39 3/8" TAS 110 Dimensional asphalt shingle.
MANUFACTURING LOCATIONS
1. Dallas, TX
2. Tuscaloosa, AL
3. Frederick, MD
EVIDENCE SUBMITTED
Test Agency
Test Identifier Test Name/Report Date
Underwriters Laboratories, Inc. TAS 107 & UL 790 04CA44252 02/25/05
ASTM D3462 02NK33813 09/23/02
ASTM D 3462 & TAS 107 R2919 Letter 03/10/11
ASTM D3462
TAS 107
ASTM E 108
4789110543 08/26/14
02/19/15
08/26/14
ASTM D3161, Class F 4787043752 10/20/15
PRI Asphalt Technologies, Inc. TAS 100 TAP-129-02-01 05/26/05
TAS 100 TAP-130-02-01 05/26/05
TAS 100 TAP-131-02-01 05/26/05
PRI Construction Materials Technologies LLC TAS 100 TAP-303-02-01 12/12/14
TAS 100 TAP-307-02-01 02/10/15
TAS 100 TAP-317-02-01 09/02/15
NOA No.: 15-1215.10
Expiration Date: 12/01/20
Approval Date: 05/26/16
Page 3 of 6
LIMITATIONS
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
fire ratings of this product.
2. Shingles shall not be installed on roof mean heights in excess of 33 ft.
3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
and Rule 61G20-3 of the Florida Administrative Code.
INSTALLATION
1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115.
2. Flashing shall be in accordance with Roofing Application Standard RAS 115.
3. The manufacturer shall provide clearly written application instructions.
4. Exposure and course layout shall be in compliance with Detail ‘A’, attached.
5. Nailing shall be in compliance with Details 'B', attached.
LABELING
Shingles shall be permanently labeled with the manufacturer’s name and/or logo, city and state of
manufacturing facility, and the following statement: “Miami-Dade County Product Control Approved” or with
the Miami-Dade County Product Control Seal as seen below:
BUILDING PERMIT REQUIREMENTS
As required by the Building Official or the applicable Building Code in order to properly evaluate the
installation of this system. This Notice of Acceptance on its own cannot be used to obtain a building permit.
NOA No.: 15-1215.10
Expiration Date: 12/01/20
Approval Date: 05/26/16
Page 4 of 6
DETAIL A
HERITAGE, HERITAGE WOODGATE, AND HERITAGE PREMIUM
DETAIL B
HERITAGE SHINGLE
FIG. 1 FASTENING PATTERN
Full
2ND COURSE
3RD COURSE
16-3
8"
29
23
10-3
8"
4TH COURSE
5TH COURSE
All dimensions are in inches.
1ST COURSE
1” 1” 7 ½” 7 ½” 7 ½” 7 ½” 7 3/8”
NOA No.: 15-1215.10
Expiration Date: 12/01/20
Approval Date: 05/26/16
Page 5 of 6
DETAIL B (CONTINUED)
HERITAGE SHINGLE
FIG. 2 ALTERNATE FASTENING PATTERN
HERITAGE SHINGLE
(TUSCALOOSA, AL)
FIG. 3 ALTERNATE FASTENING PATTERN
HORIZONTAL NAIL SPACING IN ACCORDANCE WITH FIG. 1 OR FIG. 2.
VERTICAL NAIL SPACING ALLOWED ANYWHERE WITHIN NAIL ZONE.
NOA No.: 15-1215.10
Expiration Date: 12/01/20
Approval Date: 05/26/16
Page 6 of 6
HERITAGE WOODGATE & HERITAGE PREMIUM SHINGLES
FIG. 4 FASTENING PATTERN
END OF THIS ACCEPTANCE
1” 1” 7 ½” 7 ½” 6 ½” 6 ½” 9 3/8”
6”