HomeMy WebLinkAboutProduct Approval e
Florida'Building Code Online 6/3/19,10:48 AM
-
5-
BCIS Home j Log In ! User Registration f Hot Topics I Submit Surcharge 1 Stats&Facts Publications E Contact Us { BCIS Site Map j Links ( Search
FI rich
I Product Approval
lid zi)r
ra USER: Public User
it
Product Approval Menu>Product or ADplication Search>Application List>Application Detail RECEIVED
FL# FL14672-R4
JUN 05 2019
Application Type Revision/
Code Version 2017; ST. Lucie County, Permitting
Application Status Approved
Comments
Archived -
Product Manufacturer Tarco Roofing
Address/Phone/Email One Information Way
Suite 225
Little Rock,AR 72202
(254) 913-7750
smohseen@tarcoroofing.com
Authorized Signature Shaik Mohseen
smohseen@tarcoroofing.com
Technical Representative Shaik Mohseen
Address/Phone/Email 2403 Taylors Valley Road
Belton,TX 76513
(254) 913-7750 �p oEV I �tl!'l E® F43""
smohseen@tarcoroofing.comCODE C;C)MP+p IANCE
Quality Assurance Representative Shaik Mohseen �` Vo f'aUCM COUNTY
Address/Phone/Email 2403 Taylors Valley Road 0110
Belton,TX 78717 c
(254) 939-3775 Ext 210
smohseen@tarcoroofing.com
Category Roofing ?04-101 �
Subcategory Modified Bitumen Roof System L
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
Evaluation Report- Hardcopy Received
Florida Engineer or Architect Name who developed Robert Nieminen
the Evaluation Report
Florida License PE-59166
Quality Assurance Entity UL LLC F L E
Quality Assurance Contract Expiration Date 03/09/2020
Validated By John W. Knezevich, PE
'�i. Validation Checklist-Hardcopy Received
Certificate of Independence FL14672 R4 COI 2017 01 COI Nieminen.pdf
http://www.floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgsw8ZVNfe8A7egLDAylhYNUal9LG°/`2bUShfSFxOus6rNLEQ%3d%3d Page 1 of 2
Florida Building Code Online 6/3/19,10:48 AM
Referenced Standard and Year(of Standard) Standard Year
ASTM D226 2009
ASTM D4601 2012
ASTM D6163 2008
ASTM D6222 2011
FM 4470 2012
FM 4474 2011
Equivalence of Product Standards
Certified By
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted 10/03/2017
Date Validated 10/07/2017
Date Pending FBC Approval 10/09/2017
Date Approved 12/12/2017
Summary of Products
FL# Model, Number or Name Description
14672.1 LeakBarrier EasyTorch APP modified bitumen roof systems
Modified Bitumen Roof
Systems
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL14672 R4 1 2017 10 FINAL Aj.ER TAR MODBIT APP FL14672-
Approved for use outside HVHZ:Yes R4.pdf
Impact Resistant: N/A Verified By: Robert Nieminen PE-59166
Design Pressure: +N/A/-670 Created by Independent Third Party: Yes
Other: 1.)The design pressure in this application Evaluation Reports
relates to one particular system. Refer to ER FL14672_g4 AF=_ Oz 17 10 FINAL ER ARCO MODBIT APP FL14672-
Appendix for all systems and Max Design R4.�df
Pressures. 2.) Refer to ER Section 5 for Limits of Created by Independent Third Party: Yes
Use.
Sack Next
Contact Us::2601 Blair Stone Road,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida Is an AA/EEO employer.Copyright 2007-2013 State of Florida ::Privacy Statement::Accessibility Statement::Refund Statement
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records request,do not send electronic
mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.*Pursuant to Section
455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address if they have
one.The emaiis provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to supply a
personal address,please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under Chapter
455,F.S.,please click here.
Product Approval Accepts:
® 9 M
Credit Card
Safe
http://www.floridabuilding.org/pr/pr_app_dti.aspx?param=wGEVXQwtDgsw8ZVNfe8A7egLDAylhYNUal9LG%2bUShfSFxOus6rNLEQ%3d%3d Page 2 of 2
EXTERIOR RESEARCH&DESIGN,LLC.
Certificate of Authorization##9503
Q0TRR1NrryJERD 353 Christian Street, Unit 13
Oxford,CT 06478
(203) 262-9245
EVALUATION REPORT
Tarco Roofing Evaluation Report T37910.06.11-R4
One Information Way,Suite 225 FL14672-114
Little Rock,AR 72202 Date of Issuance:06/23/2011
Revision 4:10/02/2017
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code. The product described herein has been evaluated for
compliance with the 6th Edition (2017) Florida Building Code sections noted herein.
DESCRIPTION: LeakBarrierO EasyTorchTM Modified Bitumen Roof Systems
LABELING: Labeling shall be in accordance with the requirements of the Accredited Quality Assurance Agency noted
herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes,the referenced
Quality Assurance documentation changes,or provisions of the Code that relate to the product change. Acceptance of
this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. if the product
changes or the referenced Quality Assurance documentation changes. Trinity)ERD requires a complete review of this
Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "TRINITYI ERD Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed,then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 4, plus a 4-page Appendix.
Prepared by:
,tl►�tattrrnt,��-r
Robert J.M. Nieminen P.E. •�'• �,- zr'-"
'i'�A '9,t�:•r��� The facimilie seal appearing was authorized by Robert Nieminen,P.E.
Florida Registration No.59166,Florida DCA ANE1983 ,!z °SON aLti k' on 10/02/2017.This does not serve as an electronically signed
document.
c
CERTIFICATION OF INDEPENDENCE:
1. Exterior Research&Design,LLC.d/b/a Trinity I ERD does not have,nor does it intend to acquire or will it acquire,a financial interest in
any company manufacturing or distributing products it evaluates.
2. Exterior Research & Design, LLC. d/b/a TrinitylERD is not owned, operated or controlled by any company manufacturing or
distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire,a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E.does not have,nor will acquire,a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither Trinity IERD nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any
project on which this Evaluation Report,or previous versions thereof,is/was used for permitting or design guidance unless retained
specifically for that purpose.
QO
TRINITY ER®
ROOFING SYSTEMS EVALUATION:
1. SCOPE:
Product Category: Roofing
Sub-Category: Modified Bitumen Roof Systems
Compliance Statement: LeakBarrier® EasyTorchTM Modified Bitumen Roof Systems, as produced by Tarco Roofing,
have demonstrated compliance with the following sections of the 6th Edition (2017) Florida Building Code through
testing in accordance with the following Standards. Compliance is subject to the Installation Requirements and
Limitations/Conditions of Use set forth herein.
2. STANDARDS:
Section Property Standard Year
1504.3.1 Wind FM 4474 2011
1504.7 Impact FM 4470 2012
1507.10.2 Physical Properties ASTM D226 2009
1507.10.2 Physical Properties ASTM D4601 2012
1507.11.2 Physical Properties ASTM D6163 2008
1507.11.2 Physical Properties ASTM D6222 2011
3. REFERENCES:
Entity Examination Reference Date
ERD(TST6049) Wind-FM4470/4474 T36510.05.11 05/12/2011
ERD(TST6049) Physical Properties T35450.06.11 06/22/2011
ERD(TST6049) FM4470 T39050.11.11 11/18/2011
ERD(TST6049) Physical Properties T39040.11.11 11/21/2011
ERD(TST6049) Wind-FM4470/4474 K39690SC 03/07/2012
ERD(TST6049) Wind-FM4470/4474 TAR-SC7960.01.16 01/31/2016
ERD(TST6049) Wind-FM4470/4474 TAR-SC5670.03.16 03/21/2016
ERD(TST6049) Wind-FM4470/4474 T6460.06.07-R2 05/26/2017
ERD(TST6049) Physical Properties T6470.08.07-R2 06/02/2017
UL(QUA1743) Quality Assurance Service Confirmation Exp.03/09/2020
4. PRODUCT DESCRIPTION:
This Evaluation Report covers LeakBarrier® EasyTorchTM Modified Bitumen Roof Systems installed in accordance
with Tarco Roofing published installation instructions and the Limitations/Conditions of Use herein. The following
products make up the subject systems.
. .
Table i Rol(-Goods for WakBarrler�EasyTorchTM'Modified Blturnen Roof Systems
Specification
Type Product
Reference Type Grade
LeakBarrier®EasyLayTM ASTM D226 II N/A
Base Sheets: ASTM D4601
LeakBarrier®EasyNailBaseT"" II N/A
(published)
LeakBarrier®EasyTorchT"°SA Base ASTM D6163 I S
Smooth Surfaced Membranes:
- LeakBarrier®EasyTorchTN1 APP Smooth ASTM D6222 I S
Granule Surfaced Membranes: LeakBarrier®EasyTorchTm APP Granular ASTM D6222 I G
Exterior Research and Design,U.C. Evaluation Report T37910.06.11-R4
Certificate of Authorization#9503 6T"EDITION(2017)FBC NON-HVHZ EVALUATION FL14672-114
LeakBarrier®EasyTorch Modified Bitumen Roof Systems Revision 4: 10/02/2017
Page 2 of 4
TRINITY I ER®
5. LIMITATIONS:
5.1 This is a building code evaluation. Neither Trinity IERD nor Robert Nieminen, P.E. are, in any way, the
Designer of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used
for permitting or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in FBC HVHZ jurisdictions.
5.3 Fire classification does not form part of this Evaluation Report; refer to a current Approved Roofing Materials
Directory for fire ratings of this product.
5.4 For steel deck installations,foam plastic insulation shall be separated from the building interior in accordance
with FBC 2603.4 unless the exceptions stated in FBC 2603.4.1 and 2603.6 apply.
5.5 The roof system evaluation herein pertains to above-deck roof components. Roof decks and structural
members shall be in accordance with FBC requirements to the satisfaction of the Authority Having
Jurisdiction. Load resistance of the roof deck shall be documented through proper codified and/or FBC
Approval documentation.
5.6 For recover installations,the existing roof shall be examined in accordance with FBC 1511.
5.7 For mechanically attached insulation or membrane or strip-bonded insulation,the maximum design pressure
for the selected assembly shall meet or exceed the Zone 1 design pressure determined in accordance with
FBC Chapter 16. Zones 2 and 3 shall employ an attachment density designed by a qualified design
professional to resist the elevated pressure criteria. Commonly used methods are ANSI/SPRI WD1, FM Loss
Prevention Data Sheet 1-29i Roofing Application Standard RAS 117 and Roofing Application Standard RAS
137. Assemblies marked with an asterisk* carry the limitations set forth in Section 2.2.10.1 of FM Loss
Prevention Data Sheet 1-29(January 2016)for Zone 2/3 enhancements.
5.8 For assemblies with all components fully bonded in place, the maximum design pressure for the selected
assembly shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16. No
rational analysis is permitted for these systems.
5.9 For mechanically attached insulation or membrane over existing roof decks, fasteners shall be tested in the
existing deck for withdrawal resistance. A qualified design professional shall review the data for comparison
to the minimum requirements for the system. Testing and analysis shall be in accordance with ANSI/SPRI
FX-1 or Testing Application Standard TAS 105.
5.10 For bonded insulation or membrane over existing substrates in a re-roof(tear off)or recover installation,the
existing deck or existing roof surface shall be examined for compatibility with the adhesive to be installed. If
any surface conditions exist that bring system performance into question, field uplift testing in accordance
with ANSI/SPRI IA-1, ASTM E907, FM Loss Prevention Data Sheet 1-52 or Testing Application Standard TAS
124 shall be conducted on mock-ups of the proposed new roof assembly.
5.11 For bonded insulation or membrane over existing substrates in a recover installation, the existing roof
system shall be capable of resisting project design pressures on its own merit to the satisfaction of the
Authority Having Jurisdiction, as documented through field uplift testing in accordance with ASTM E907, FM
Loss Prevention Data Sheet 1-52 or Testing Application Standard TAS 124.
5.12 Metal edge attachment (except gutters), shall be designed and installed for wind loads in accordance with
FBC Chapter 16 and tested for resistance in accordance with ANSI/SPRI ES-1 or Roofing Application Standard
RAS 111, except the basic wind speed shall be determined from FBC Figure 1609.3(1), 1609.3(2) or
1609.3(3).
5.13 All products in the roof assembly shall have quality assurance in accordance with FAC Rule 61G20-3.
6. INSTALLATION:
6.1 EasyTorchTM Modified Bitumen Roof Systems shall be installed in accordance with Tarco Roofing published
installation instructions,subject to the Limitations/Conditions of Use noted herein.
Exterior Research and Design,U.C. Evaluation Report T37930.06.11-R4
Certificate of Authorization#9503 6T"EDITION(2017)FBC NON-HVHZ EVALUATION FL14672-R4
LeakBarrier®EasyTorch Modified Bitumen Roof Systems Revision 4: 10/02/2017
Page 3 of 4
F�c
'\J TR1Nrry ER®
6.2 System attachment requirements for wind load resistance are set forth in Appendix 1. "MDP" = Maximum
Design Pressure is the result of testing for wind load resistance based on allowable wind loads, and reflects
the ultimate passing pressure divided by 2 (the 2 to 1 margin of safety per FBC 1504.9 has already been
applied). Refer to FBC 1609 for determination of design wind loads.
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of
this product.
S. MANUFACTURING PLANTS:
Contact the named QA entity for manufacturing facilities covered by F.A.C.Rule 61G20-3 QA requirements.
9. QUALITY ASSURANCE ENTITY:
Underwriters Laboratories—QUA1743;(414)248-6409;Karen.buchmann@us.ul.com
-THE FOUR(4)PAGES THAT FOLLOWS FORM PART OF THIS EVALUATION REPORT-
Exterior Research and Design,I.I.C. Evaluation Report T37930.06.11-R4
Certificate of Authorization#9503 6T"EDITION(2017)FBC NON-HVHZ EVALUATION F1.14672-114
LeakBarrier®EasyTorch Modified Bitumen Roof Systems Revision 4: 10/02/2017
Page 4 of 4
TRINITY IERD
APPENDIX 1 ATTACHMENT REQUIREMENTS FOR WIND UPLIFT RESISTANCE
Table. Deck Application Type Description Page
1A Wood New,Reroof(Tear-Off)or Recover C Mech.Attached Insulation,Bonded Roof Cover 2
1B Wood New,Reroof(Tear-Off)or Recover D Insulated,Mech.Attached Base Sheet,Bonded Roof Cover 2
1C-1 Wood New or Reroof(Tear-Off) E Non-Insulated,Mech.Attached Base Sheet(nails),Bonded Roof Cover 3
1C-2 Wood New,Reroof(Tear-Off)or Recover E Non-Insulated,Mech.Attached Base Sheet(screws&plates),Bonded Roof Cover 4
1D Wood New or Reroof(Tear-Off) F Non-Insulated,Bonded Roof Cover 4
2A Concrete New or Reroof(Tear-Off) F Non-Insulated,Bonded Roof Cover 4
The following notes apply to the systems outlined herein:
1. The roof system evaluation herein pertains to above-deck roof components. Roof decks and structural members shall be in accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction.
Load resistance of the roof deck shall be documented through proper codified and/or FBC Approval documentation.
2. Unless otherwise noted,fasteners and stress plates for insulation attachment shall be as follows. Fasteners shall be of sufficient length for the following engagements:
➢ Wood Deck: OMG#12 or#14 HD with OMG 3 in.Galva lume Steel Plate(non-ribbed)or Tru-Fast DP or HD with Trufast 3"Metal Insulation Plates. Minimum Y4-inch plywood penetration or minimum
1-inch wood plank embedment.
3. Unless otherwise noted,insulation may be any one layer or combination of polyisocyanurate,polystyrene,wood fiberboard,perlite or gypsum-based roof board that meets the QA requirements of F.A.C.Rule 61G20-
3 and is documented as meeting FBC 1505.1 and,for foam plastic,.FBC Chapter 26,when installed with the roof cover.
4. For mechanically attached components or partially bonded insulation,the maximum design pressure for the selected assembly shall meet or exceed the Zone 1 design pressure determined in accordance with FBC
Chapter 16, and Zones 2 and 3 shall employ an attachment density designed by a qualified design professional to resist the elevated pressure criteria. Commonly used methods are ANSI/SPRI WD1, FM Loss
Prevention Data Sheet 1-29, Roofing Application Standard RAS 117 and Roofing Application Standard RAS 137. Assemblies marked with an asterisk*carry the limitations set forth in Section 2.2.10.1 of FM Loss
Prevention Data Sheet 1-29(January 2016)for Zone 2/3 enhancements.
5. For assemblies where all components are fully adhered,the maximum design pressure for the selected assembly shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16,and no
rational analysis is permitted.
6. For mechanically attached components over existing decks,fasteners shall be tested in the existing deck for withdrawal resistance. A qualified design professional shall review the data for comparison to the
minimum requirements for the system. Testing and analysis shall be in accordance with ANSI/SPRI FX-1 or Testing Application Stanard TAS 105.
7. For existing substrates in a bonded recover or re-roof installation,the existing roof surface or existing roof deck shall be examined for compatibility and bond performance with the selected adhesive,and the existing
roof system(for recover)shall be capable of resisting project design pressures on its own merit to the satisfaction of the Authority Having Jurisdiction,as documented through field uplift testing in accordance with
ANSI/SPRI IA-1,ASTM E907,FM Loss Prevention Data Sheet 1-52 or Testing Application Standard TAS 124.
8. "MDP"=Maximum Design Pressure is the result of testing for wind load resistance based on allowable wind loads.Refer to FBC 1609 for determination of design wind loads.
Exterior Research and Design,I.I.C.d/b/a Trinity I ERD Evaluation Report T37910.06.11-R4 for FL14672-R4
certificate of Authorization#9503 6T"EDITION(2017)FBC NON-HVHZ EVALUATION Revision 4:10/02/2017
Prepared by: Robert Nieminen,PE-59166 LeakBarrier®EasyTorch"Modified Bitumen Roof Systems;(254)913-7750 Appendix 1,Page 1 of 4
C)o
TRINITY�ERD
TABLE 1A WOOD DE6K5 NEW CONSTRUCTION,REROQF(Tear,Off�oI;RECOVER
SYSTEM TYPE Cn MECHANICALLY ATTACHED,INSULATION,BONDED ROOF COVER
System Deck Top Insulation Layer Roof Cover MDP
Base Insulation Layer
No. (Note 1) Type Fasteners Attach Base Ply Ply Cap (psf)
SELFrADHERING,BASE PLY:, ' i.. th
Min.15/32 (Optional)One or more Min.3/8-inch SECUROCK .2 EasyTorch SA Base, (Optional)EasyTorch SA Base, EasyTorch APP Smoo
W-1. plywood at max. layers,any combination, Note 2 1 per 1 ft self-adhering or EasyTorch APP or Granular,torch- -52.5
24"spans loose laid Gypsum-Fiber Roof Board self-adhering Smooth,torch-applied applied
Min.15/32" (Optional)One or more Min.2-inch ACFoam II, (Optional)EasyTorch SA Base, EasyTorch APP Smooth
EnergyGuard Polyiso,ENRGY 2 EasyTorch SA Base,
W-2. plywood at max, layers,any combination, Note 2 1 per 1 ft self-adhering or EasyTorch APP or Granular,torch- -82.5
24"spans loose laid 3,H-Shield,ISO 95+GL or self-adhering Smooth,torch-applied applied
Multi-Max FA3
ka
TORCH-APPLIED'BASE PLY
Min.15/32" (Optional)One or more Min.3/8-inch SECUROCK • 2 EasyTorch APP (Optional)^EasyTorch APP EasyTorch APP Smooth
W-3. plywood at max. layers,any combination, Note 2 1 per 1 ft
Smooth,torch- or Granular,torch- -52.5
24" loose laid Gypsum-Fiber Roof Board applied Smooth,torch-applied applied
n rr TABLE 16 WOOD DECKS NEW CONSTRUCTION,REROOF(Tear=Offl or RECOVER
�-
aF. z
;SYSTEWi TYRE D IN
NI ATTACHED BASE SHEET,.BQNDED ROOF.COVER
System Deck Insulation Layer Base Sheet Roof Cover MDP
No. (Note 1) Type Attach Type Fasteners Attach Base Ply Ply Cap Ply (Psf)
SELFADHERING BASE PLY:.-
Min.15/32" Any type, 10-inch o.c.in the min.4-inch lap and EasyTorch SA (Optional)EasyTorch SA Base, EasyTorch APP
W-4. plywood at max. thickness or Loose EasyLay Note 2 10-inch o.c.in two,equally spaced, Base,self- self-adhering or EasyTorch Smooth or Granular, -60.0
24"spans combination laid staggered center rows adhering APP Smooth,torch-applied torch-applied
Min.15/32" Any type, 8-inch o.c.in the min.4-inch lap and EasyTorch SA (Optional)EasyTorch SA Base, EasyTorch APP
Loose
W-5. plywood at max. thickness or EasyLay Note 2 8-inch o.c.in four(4),equally spaced, Base,self- self-adhering or EasyTorch Smooth or Granular, -135.0
24"spans combination
laid staggered center rows adhering APP Smooth,torch-applied torch-applied
Min.15/32" Any type, 6-inch o.c.in the min.4-inch lap and EasyTorch SA (Optional)EasyTorch SA Base, EasyTorch APP
W-6. plywood at max. thickness or Loose EasyNailBase Note 2 6-inch o.c.in four(4),equally spaced, Base,self- self-adhering or EasyTorch Smooth or Granular, -135.0
Smooth,torch applied torch-applied
24"spans combination laid staggered
rows
,.<<
;TORCH-APPLIED;BASE PLY:;: s4;
s re center ro 'adhering APP
Min.15/32" Any type, 6-inch o.c.In the mm 4-inch lap and EasyTorch APP EasyTorch APP
Loose (Optional)EasyTorch APP
W-7, plywood at max. thickness or EasyNailBase Note 2 6-inch o.c.In four(4),equally spaced, Smooth,torch- Smooth or Granular, 135.0
laid Smooth,torch-applied
24"spans combination staggered center rows applied torch-applied
Exterior Research and Design,U.C.d/b/a Trinity ERD Evaluation Report T37910.06.11-R4 for FL34672-R4
Certificate of Authorization#9503 6T"EDITION(2017)FBC NON-HVHZ EVALUATION Revision 4:10/02/2017
Prepared by: Robert Nieminen,PE-59166 LeakBarrier®EasyTorch`"Modified Bitumen Roof Systems;(Z54)913-7750 Appendix 1,Page 2 of 4
( 0
QTRINITY'JERD
TABLE iC.1 WQOD DECKS'=NEW CONSTRUCTION or REROOF(.Tear-Off) 2; z
r ,
•SYSTEM TYPE E.,:NON INSULATED,MECHANICALLY ATTACHED BASE SHEET{nails),BONDED ROOF COVER
System Deck Base Sheet Roof Cover MDP
No. (Note 1) Type Fasteners Attach Base Ply Ply Cap Ply (psf)
41,
SELF-ADHE8 NG BASE PLYC'r
Min.19/32' 12 ga.annular ring shank nails 7-inch o.c.in the 4-inch lap and 7- EasyTorch SA Base, (Optional)EasyTorch SA Base, EasyTorch APP
W-8. plywood at max. EasyLay and min.32 ga.,1-5/8"diameter inch o.c.in three,equally spaced, self-adhering or EasyTorch APP Smooth or Granular, -60.0
24"spans tin-caps. (Ref: FBC 1517.5) staggered center rows self-adhering Smooth,torch-applied torch-applied
Min.15/32" 8-inch o.c.in the min.4-inch lap and EasyTorch SA Base, (Optional)EasyTorch SA Base, EasyTorch APP
W-9. plywood at max. EasyLay Simplex MAXX Cap Fastener 8-inch o.c.in four(4),equally self-adhering or EasyTorch APP Smooth or Granular, -82.5
24"spans spaced,staggered center rows self-adhering Smooth,torch-applied torch-applied
Min.15/32' 12 ga.annular ring shank nails 4-inch o.c.in the 4-inch lap and 4- EasyTorch SA Base, (Optional)EasyTorch SA Base, EasyTorch APP
W-10, plywood at max. EasyLay and min.32 ga.,1-5/8"diameter inch o.c.in four(4),equally spaced, self-adhering self-adhering or EasyTorch APP Smooth or Granular, -120.0
24"spans tin-caps. (Ref: FBC 1517.5) staggered center rows Smooth,torch-applied torch-applied
Min.15/32' 12 ga.annular ring shank nails 4-inch o.c.in the 4-inch lap and 4- EasyTorch SA Base, (Optional)EasyTorch SA Base, EasyTorch APP
W-11. plywood at max. EasyNailBase and min.32 ga.,1-5/8"diameter inch o.c.in five(5),equally spaced, self-adhering self-adhering or EasyTorch APP Smooth or Granular, -120.0
24"spans I I tin-caps. (Ref: FBC 1517.5) staggered center rows Smooth,torch-applied torch-applied
TORCH-APPUEDBASE PLY:
Min.15/32' 9-inch o.c.in the min.2-inch lap and (Optional)EasyTorch (Optional)EasyTorch APP EasyTorch APP
W-12. plywood at max. EasyNailBase Simplex MAXX Cap Fastener 18-inch o.c.in two(2),equally APP Smooth,torch- Smooth,torch-applied Smooth or Granular, -45.0
24"spans spaced,staggered center rows applied torch-applied
Min.15/32' 9-inch o.c.in the min.2-inch lap and (Optional)EasyTorch EasyTorch APP
W-13. plywood at max. EasyNailBase Simplex MAXX Cap Fastener 12-inch o.c.in two(2),equally APP Smooth,torch- (Optional)EasyTorch APP Smooth or Granular, -52.5
24"spans spaced,staggered center rows applied Smooth,torch-applied torch-applied
Min.15/32' 6-inch o.c.in the min.2-inch lap and (Optional)EasyTorch (Optional)EasyTorch APP EasyTorch APP
W-14. plywood at max. EasyNailBase' Simplex MAXX Cap Fastener 6-inch o.c.in two(2),equally APP Smooth,torch Smooth or Granular, -90.0
24"spans spaced,staggered center rows applied Smooth,torch-applied torch-applied
Min.15/32' 6-inch o.c.in the min.2-inch lap and (Optional)EasyTorch EasyTorch APP
W-15. plywood at max. EasyNailBase Simplex MAXX Cap Fastener 6-inch o.c.in three(3),equally APP Smooth,torch- (Optional)EasyTorch APP Smooth or Granular, -105.0
24"spans spaced,staggered center rows applied Smooth,torch-applied torch-applied
Min.15/32' 12 ga.annular ring shank nails 4-inch o.c.in the 4-inch lap and 4- (Optional)EasyTorch (Optional)EasyTorch APP EasyTorch APP
W-16. plywood at max. EasyNailBase and min.32 ga.,1-5/8"diameter inch o.c.in five(5),equally spaced, APP Smooth,torch- Smooth,torch-applied Smooth or Granular, -120.0
24"spans tin-caps. (Ref: FBC 1517.5) staggered center rows applied torch-applied
Exterior Research and Design,LLC.d/b/a Trinity I ERD Evaluation Report T37910.06.11-R4 for FL14672-114
Certificate of Authorization#9503 6T"EDITION(2017)FBC NON-HVHZ EVALUATION Revision 4:10/02/2017
Prepared by: Robert Nieminen,PE-59166 LeakBarrier"EasyTorch'"Modified Bitumen Roof Systems;(254)913-7750 Appendix 1,Page 3 of 4
TRINITY�ERD
r. ;_TABLE C 2 .WOOD DECKS NEW CONSTRUCTION,REROOF(Tear Off)orRECC±VER "
SYSTEMsTYPE E:;:NON-IRiSULATED MECHANICALLY ATTE#CHED B/ASE`SHEET"(screws&plates),BONDED,ROOF'COVER
F _
_. . _
System Deck Base Sheet Roof Cover MDP
No. (Note 1) Type Fasteners Attach Base Ply Ply Cap Ply (psf)
SELF-ADHERING;BASE PLY:, '
Min.15/32" 10-inch o.c.in the min.4-inch lap and 10-inch o.c.in two, EasyTorch SA Base, self-adherin or EasyTorch APP Smooth or Granular, -60.0
W-17. plywood at max. EasyLay Note 2 equally spaced,staggered center rows self-adhering g Y
24"spans Smooth,torch-applied torch-applied
Min.15/32" Eas Torch SA Base, (Optional)EasyTorch SA Base, EasyTorch APP
9-inch o. in the min. inch lap and 8-inch o.c.in four(4), Y self-adhering EasyTorch APP Smooth or Granular, -135.0
W-18. plywood at max. EasyLay Note 2 equally spaced,staggered
g or ed center rows self-adhering Y
24"spans Smooth,torch-applied torch-applied
Min.15/32" 6-inch o.c.in the min.4-inch lap and 6-inch o.c.in four(4), EasyTorch SA Base, self-adherin or EasyTorch APP Smooth or Granular, -135.0
W-19. plywood at max. EasyNailBase Note 2 equally spaced,staggered center rows self-adhering g Y
24"spans Smooth,torch-applied torch-applied
TORCH APPLIED,BASE PLY:
Min.15/32" (Optional)EasyTorch EasyTorch APP
W-20. plywood at max. EasyNailBase Note 2 6-inch o.c.in the min.4-inch lap and 6-inch o.c.m four(4), APP Smooth,torch- (Optional)EasyTorch APP Smooth or Granular, -135.0
24"spans equally spaced,staggered center rows applied Smooth,torch-applied torch-applied
K —
TABLE iD WOOD DECKS NEW-CONSTRUCTION or REROOF(Tear-Off)
SYSTEM F TYPE BONDED,ROOF,COVER
System Deck(Note 1) Roof Cover MDP
No. Type Joint Treatment Base Ply Ply Cap (psf)
Min.15/32"plywood (Optional)EasyTorch SA Base,self-adhering EasyTorch APP Smooth or _75.0
LW22.
None EasyTorch SA Base,self-adhering or Eas Torch APP Smooth,torch-a lied Granular,torch-a lied
at max.24"spans Y PP� PP•Min.15/32"plywood Plywood joints are covered with 4-inch wide strips of (Optional)EasyTorch SA Base,self-adhering EasyTorch APP Smooth or
EasyTorch SA Base,self-adhering 120.0
at max.24"spans EasyBase,rolled into place to create continuous band. or EasyTorch APP Smooth,torch-applied Granular,torch-applied
;TABLE 2A-'CONCRETE DECKS NEW CONSTRUCTION orREROOF(Tear Off).
'SYSTEM TYPE F:•NON INSULATED;BONDED ROOF,,COVER,, 4
System Deck Roof Cover MDP
No. Primer
(Note 1) Base Ply Ply Cap (psf)
C-1. Concrete ASTM 041 EasyTorch APP Smooth,torch-applied I (Optional)EasyTorch APP Smooth,torch-applied EasyTorch APP Smooth or Granular,torch-applied -670.0
Exterior Research and Design,LLC.d/b/a Trinity ERD Evaluation Report T37910.06.11-R4 for F1.34672-114
Certificate of Authorization#9503 6'EDITION(2017)FBC NON-HVHZ EVALUATION Revision 4:10/02/2017
Prepared by: Robert Nieminen,PE-59166 LeakBarrier®EasyTorch`"Modified Bitumen Roof Systems;(254)913-7750 Appendix 1,Page 4 of 4