HomeMy WebLinkAboutProduct Approval 398 E. Dania Beach Blvd.
BUILDING DROPS Suite338
µ A Perfect Solution in Every Drop Dania Beach, FL 33004
X > 954.399.8478 PH
Certificate of Authorization:29578 954.744.4738 FX
contact@ buildingdrops.com
Prodtpa Evaluation Report
of
JELD-WEN, Inc.
Premium Atlantic Vinyl Single Hung - Impact
for
Florida Product Approval
Current Florida Building Code
Method: 1 — A (Certificate)
1
Category: Windows
Sub — Category: Single Hung
Product: Premium Atlantic Vinyl Single Hung -Impact
Material: PVC
Product Dimensions: 3 6"x 72"(D/X)
Prepared For:
,6F1.,F3- E-, N, Itic.
3737 Lakeport Blv
d.
ld..�y
I Kleirl f .Falls, OR r17601
Prepared by: ```�,
1-1����;nes F. Norero, P . ��`�ES F. 0" ��,��
Florida Professional Engineer#73778 �� Q- • ' ��
Date: 08/11/2014 Z�.•'�.��• •. .;��
'�No. 7 778/
Contents,
Evaluation Report Pages 1 -4 TAT/E Q
Hermes F. Norero, P.E.
Florida No. 73778
14
BUILDING DROPS Date: 0 : 30 4
Report No Date: : 94
A Perfect Solution in Every Drop
Certificate of Authorization:29578
Manufacturer: JELD-WEN, Inc.
Product Category: Windows
Product Sub-Category: Single Hung
Compliance Method: State Product Approval Method (1)(a)
Product Name: Premium Atlantic Vinyl Single Hung— Impact
(Impact)
36" x 72" (O/X)
Scope: This is a Product Evaluation Report issued by Hermes F. Norero, P.E. (FL#73778) for 1ELD-WEN, Inc.
based on Method 1a of the State of Florida Product Approval, Department of Business and
Professional Regulation - Florida Building Commission.
Hermes F. Norero, P.E. does not have nor will acquire financial interest in the company
manufacturing or distributing the product or in any other entity involved in the approval process of
the product named herein.
This product.has been evaluated for use in locations adhering to the current Florida Building Code.
See Installation Instructions NCTL210-3875-1-FBC, signed and sealed by Hermes F. Norero, P.E. (FL#
73778) for specific use parameters.
Limits of Use:
1. This product has been evaluated and is in compliance with the current Florida Building Code,
including the "High Velocity Hurricane Zone" (HVHZ).
2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment into
substrate material shall be beyond wall dressing or stucco.
3. When used in areas requiring wind borne debris protection this product complies with
Section 1609.1.2 of the current Florida Building Code and does not require an impact
resistant covering.
4. Site conditions that deviate from the details of drawing NCTL210-3875-1-FBC require further
engineering analysis by a licensed engineer or registered architect.
5. See Installation Instructions NCTL210-3875-1-FBC for size and design pressure limitations.
Hermes F. Norero, P.E.
Florida No. 73778
Page 2 of 4
14
BUILDING DROPS Date: 0 : 30 4
Report No Date: : 94
A Perfect Solution in Every Drop
Certificate of Authorization:29578
Quality Assurance: The manufacturer has demonstrated compliance of products in accordance with the
Florida Building Code for manufacturing under a quality assurance program audited
by an approved quality assurance entity through National Accreditation and
Management Institute (FBC Organization #: QUA 1789).
Performance Standards: The product described herein has been tested per:
Q TAS 201-94
TAS 202-94
TAS 203-94
Referenced Data: 1. Product Testing performed by National Certified Testing Laboratories NW
(FBC Organization# TST9341)
Report#: NCTL-210-3875-1, Report Date: 4/18/2013
2. Certification Agency
National Accreditation and Management Institute
i
(FBC Organization#: CER 1773)
i
3. Material Certification
Miami Dade RER—Product Control Section NOA
E.I. DuPont De Nemours & Co., Inc.: PVB Interlayer
4. Material Certification
Miami Dade RER—Product Control Section NOA
Quanex Building Products: PVC Extrusions
I
i
i
i
i
Hermes F. Norero, P.E.
Florida No. 73778
Page 3 of 4
14
BUILDING DROPS Date: 0 : 30 4
Report No Date: : 94
A Perfect Solution in Every Drop
Certificate of Authorization:29578
Through Frame Installation: 1. Approved anchor types and substrates are as follows:
A. For concrete (Min.f'c= 3000 psi) or masonry substrate (Min. Pc= 1500 psi) where one
by(1X), non-structural, wood bucking is employed, use (1)3/16"diameter ITW Tapcon
type concrete screw anchors per location of sufficient length to achieve minimum
embedment of 1.25" into concrete or masonry.
B. For concrete (Min. f'c= 3000 psi) or masonry substrate (Min, f'c= 1500 psi) where wood
bucking is NOT employed, use (1)3/16"diameter ITW Tapcon type concrete screw
anchors per location of sufficient length to achieve minimum embedment of 1.25" into
concrete or masonry.
C. For steel substrate, use (1) #8 Tek Screw type steel frame (min. 18ga.) anchors per
location of sufficient length to achieve minimum three threads of penetration beyond
steel structure.
Nail Fin Installation(Where applicable):
A. For wood substrates (Min. S.G. =0.42) use (1)#10 Wood Screw type installation anchors
per location of sufficient length to achieve a minimum embedment of 1.50" into the
wood substrate.
Refer to Installation Instructions (NCTL210-3875-1-FBC) for anchor spacing and more details of the
installation requirements.
Design Pressure:
I Design Pressure
Positive 65 PSF
j Negative 70 PSF
I
i
Hermes F. Norero, P.E.
Florida No. 73778
Page 4 of 4
NOTICE OF PRODUCT CERTIFICATION
CERTIFICATION NO: NI011567.04-I13
DATE: 05/23/2013
' d
I �
Q; ! CERTIFICATION PROGRAM: Structural
COMPANY: JELD-WEN
CODE: 1822-1
`a'rr d�7C1"f l �4ti
REVISION DATE: 01/13/2017
TO vcri I'v that the"Notice ol`Product Certification"is valid,please visit www.NAMICertil1 cat[on.con to assure that the
product i active and currently listed.This certification represents product conformity to the applicable spccif ication and
that cc rti ficatiun criteria has been satisfied. A NAMI approved certification label must be applied to the product to claim
certification status. Please review and advise NAM ii'any corrections are roquired to this (loCnnent.
COIMPANV NAME AND ADDRESS PRODUCT DESCRIPTION
J ELD-WEN "Premium Atlantic Vinyl Single [lung (8100)"
3737 Lakeport Boulevard Impact Rated Vinyl Single Hung Window
Klamath Falls, OR 97601 (Fin or Flange Installation)
Conliguration:O!X
Glaring: MY-118" Annealed Glass/Laminate-
S"Annealed Glasw0.090"PVf3 Interlayer by DuPonv,
1/8"Annealed Glass or IG-UK Annealed Glass`Laminate-
1/8"anncaled0ass/0.090"Scntrycilas Plus by DuPont,
Us"Annealed Glass
Franc: W-914mn(36") 1-1-1829nun(72")
Sash: W-845nrnt(33.25") I-1-883nnn(3=4.75")
i
SPECIFICATION PRODUCT RATING
TAS 201/202/203-94 Design Pressure: +65/-70 psf
Large Missile Impact Rated
Product Tested By: National Certified Testing Laboratories
Report No: NCTL-210-3875-1
i
Expiration late: April 30, 2025
I
i
Administrator's Signature:
NATIONAL ACCREDITATION AND
MANAGEMENT INSTITUTE, INC.
4794 George Washington Memorial Highway
Hayes, VA 23072
Tel: (804) 684-5124
Fax: (804) 684-5122
5,5*MAX.
mom NAIL FIN INSTALLATION
CORNERS
FOR EDGE 3/4"
W 16, O.C.
2
MIN.DISTANCE
UU. THRU
NAIL FIN 3,4'
?X Wool) 3
i FRAME
li SHIM f?ACE
71
2
1/4"MAX
SHIM SPACE
1 112"MIN.
EMBEDMENT
--T
0 &ASS KIT
GLAZING DETAIL
t JAMB SECTION(TYP)
FRAME SECTION(TYP)
VERT-CA 0 HtT ORIZONTAL SECTION
_.,_,_�SECTI N
A
-i
S+4M SPACE 3
4*IM
FROU MIN -
CORNERS tISTA�1
FOQ Ebrlel 3/4,
' PREMIUM ATLANTIC VINYL SH WINDOW
2 1 1
?X V.100D-QAME Max Frame DP RATING IMPACT I I U2'A%!M EAQEDMENT
WINDOW WIDTH(36-UM 36 x 72 +65/-70 1 YES
TYPICAL ELEVATION WITH FASTENER SPACING
LARGE MISSILE IMPACT
Installation Notes: General Notes:
1, Sea[flangelframe to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria
2, Use 410 PH or areater fastener though the nail fin with sufficient length to penetrate a minimum of I of the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
112"into the wood framing. For 2X wood frame substrate(min.S.G.=0.42). Building Code(FBC)including HVHZ and the industry requirement for the stated conditions.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 2. All glazing shall conform to ASTM E1300.
to the structure. The host structure is the responsibility of the architect or engineer of record for the 3. At minimum,glazing is 3mm annealed- 11 mm airspace-3mm annealed-2mm PVB Interlayer by
project of installation. Digitally signed by Hermes F.Norero,P.E. DuPont-3mm annealed,
Reason:I am approving this document 4. Use structural or composite shims where required.
Date:2014.09.19 16:26:14-04'00'
This schedule addresses only the fasteners required to anchor the
window to achieve the rated design pressure up to the size limitaflons
noted. It is not intended as a guide to the installation process and does
ORO&Cr ENGINUF
not address he sealing consideration that may arise in different will • 08/13/2014 3737 Lakeport Blvd
DRAM BY: SCALL: Falls, OR.97601
• Klamath
conditions. For the comolete installation procedure,see the instructions JIELDVEN
'Z� 0 D. Vezo NTS
packaged with the window or go to 17/1�77§� I Phone: (541)882-3451
CHLCKED BY: 11 T ILE:
%",w.jeld-wen.coni,lrpsources/iiistallatioii. Kantola
-n T-' TAT,L Q� Z A"PROVED BY: Premium Atlantic Vinyl Impact Single Hung Window
DISCLAIMER: 4
/,1J -
This drawing and its contents are confidential and are not to be
-1-reproduced orcopiedin-whole-orin-part or used or disclosed to others D008729
except as authorized by JELD-WEN Inc. 11,ENT!F1flRNa PuV4- AND LOCAT!ON CAD D1.7c. N, 001 SziFET
NCTI-210-38-75-1-Fk-"'*" 001 1
� ""`FROM MASONRY INSTALLATION
FROM
n CORNERS
',. I a� ._..._._ ..__... ......_ __.._......
lG� 75, O.C. a
M . THRU a 3Tit
,
JAYS 41.
EMSEuN.Eu" ,
I i
!rr'f.4x 1/4-MAX
suto._cv.2 3
SN:1d S°AC!E
MIN DLSinnn= D a 7 !
FOP rZ6C U2` :V 2
' r -
ti
1 1! 1 8LOCX t
i
GLAZING DETAIL JAMB SECTION(TYP) i
HORIZONTAL SECTION �
FRAME SECTION
I
11 VERTICAL 5ECTi4N
I s;
i
i
/ MAY
S'MAX
CORNERS III VVV v a 'p .. ��tt6FDhNT I
14 b PREMIUM ATLANTIC VINYL SH WINDOW
FROM
2 Na5CJ2y I Max Frame I DP RATING IMPACT
WIDTH(39-W".) 36 x 72 +65/-70 1 YES
TYPICAL ELEVATION WITH FASTENER SPACING f IN ems ANCE i LARGE MISSILE IMPACT
Installation Notes:
General Notes:
1. Seal flange/frame to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria
2. Use 3116"ITW Tapcon or equivalent fasteners through frame with sufficient length to penetrate a of the adopted International Building Code(IBC),the International Residential Code(IRC),the Florida
minimum of 1 1/4"into concrete or masonry at each location with a 2 1/2"min from edge distance.For Building Code(FBC)including HVHZ and the industry requirement for the stated conditions.
concrete (min.fc=3000psi)or masonry substrate(CMU shall adhere to ASTIvt C90). 2. All glazing shall conform to ASTM E1300.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to properly transfer all loads 3. At minimum,glazing is 3mm annealed-11 mm airspace-3mm annealed-2mm PVB Interlayer by
to the structure. The host structure is the responsibility of the architect or engineer of record for the DuPont-3mm annealed.
project of installation. 4. Use structural or composite shines where required.
This schedule addresses only the fasteners required to anchor the
window to achieve the rated design pressure up to the size limitations
noted. It is not intended as a guide to the installation process and does PRoWc;rr,carFrr;: DATE;
not address he sealing consideration y •••"y`'' '� -- 3737 Lakeport Blvd
g n that may arise in wall �Q 08/13/2014
conditions. For the complete iI staliation procedure,see the instructions : �� '7S s . ' DRAV"N BY: SU.E: Klamath Falls,OR.97601
packaged with the window or o to p = % �� '' r U. Vezo NTS Phone: (541)882-3451
m+,w.geld:ven.com/resources/installation. _ * f� r * _ CHEcrEDBY: Itr�
STATE E_ a = .hnov=L,�;: Pre 3. Kantola
mium Atlantic Vinyl Impact Single Hung Window
DISCLAIMER: r � ! p �
This drawing and its contents are confidential and are not to be per•••-. L pRjO?:• ,'� FAR;;�Ro,ECT�,o
-reproduced_or copied in whole or in part or used or disclosed to others /i �•Ko��• �` D008729
/ -P.E—No �'1YOB except as as authorized by JELD�NEN Inc. 398 E� l�vti. .9alite 338 !oeirT.Fteu c+, rt::r+-n;.+<=Aaan.cx nrrr,: c,n De:c raa: Rey SHr
ea `�E1 3 04 NCTI_2I0-3875- -FBC 0011�1 !
5.3' MAX.
FROM Di 5 T STEEL INSTALLATION
CORNERS
15"O.C.
MAX.THRU gaug
J"s 51ecl 5YL-d
114'M,X
SHLIA SPAC.F. 114" '
M A X
0 SHIM SPACE
ANCE M14 DrS
embedmentI --T of three threads
pas*frame
0 GLASS 8
L
4-
GLAZING DETAIL
L�WJ
JAMS SECTION(TYP)
FRAME SECTION(TYP) HORIZONTAL SECTION)
VERTICAL SECTION
1/4*MAX ..........
MAX. ISHIM SPACE
FROM 18 9—"'ir.
CORNERS It 5f-f 51,4
PREMIUM ATLANTIC VINYL SH WINDOW ;
M..—bed—.t
2 Max Frame I 0P RATING I IMPACT
WINDOW WIDTH(SO-UAX) 36 x 72 +65/-70 1 Y75
MIN DISTANCE
TYPICAL ELEVATION WITH FASTENER 5PACING FOP EDGE !/21 LARGE MISSILE IMPACT
Installation Notes: General Notes:
1. Seal flangelfrime to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria
2. For anchoring into metal framing use#8 TEK Self Tapping screws with sufficient length to achieve a of the adopted International Building Code(lBC),the International Residential Code(IRC),the Florida
minimum embedment of three threads past the frame thickness. Steel substrate min.18ga.,fy=33 ksi. Building Code(FBC)including HVHZ and the industry requirement for the stated conditions.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to property transfer all loads 2. All glazing shall conform to ASTNI E1300.
to the structure. The[lost structure is the responsibility of the3. At minimum,glazing is 3mrn annealed- 11 mill airspace 3mm annealed-2mm PVB Interlayer by
architect or engineer of record for the DuPont-3mrn annealed.
project of installation. 4. Use structural or composite shims where required.
This schedule addresses only the fasteners required to anchor the
window to achieve the rated design pressure up to the size limitations
noted. It is not intended as a guide to the installation process and does
• 3737 Lakeport Blvd
not address he sealing consideration that may arise in different wall 08/13/2014
conditions, For the complete installation procedure,see the instructions SCALE: JLda-&AD WEN Klamath Fills OR, 97601
0
D. Vezo NTS 1)SS2-3451
packaged with the window or-go to Z Phonr-,: 154
C14KKED BY: HILL'!
%tiww.ield-weii.coni,lresources/installatioii.
J. Kantola
13 Z Premium Atlantic Vinyl Impact Single Hung Window
t'— STATE OF 'VIPROVED fly:
DISCLAIMER: 44J
/I —
I I .
This drawing and its contents are confidential and are not to be 0 *' P , .. ;�'.- , —
,',. ;<" --.'t0'RQ - PART PROIECT,'Io.
reproduced or copied in whole or in part or used or disclosed to others . D008729
except as authorized by JELD-INEN Inc. a 1)7 f pea L'U4 NCTI-210-3875-1-FBC o0l SHF-E 30� 3
IDENTIFIER No PLANTNAI E.AND LOCAT:ON :AD D'NG N"': T
39 No, 338
ss THROUGH FRAME
FROW IT %me.
CORNERS INSTALLATION
3
2
Nix.THRU i W.'MIN
JAMB
EMM-DMENT
;.—MAX
1;411 MAX
SPACE
T"'
M.!N.Di
F0k EDGE:3/4" 2
13 16—
(0 h,
A
-C!141 J0
i I GLAZIN&DETAIL JAMB SECTION(TYP)
AIM
HORIZONTAL SECTION
FRAME SECTION(TYP)
VERTICAL SECTION
1;4'A%AX
3
CORNM
!I T/ 112,MMI, PREMIUM ATLANTIC VINYL SH WINDOW'
Max Frame DP RATING1 IMPACT
WINDOW WIM(35-WAX.) 36 x 7: 70 1 YES
i. FOR EbSE 3/4'
TYPICAL ELEVATION WITH FASTENER SPACING !1 —
LARGE MISSILE IMPACT
Installation Notes: General Notes:
1. Seal flangelframe to substrate. 1. The product shown herein is designed,tested and manufactured to comply with the wind load criteria
2. Use#10 PH or greater fastener though thejamb with sufficient length to penetrate a minimum of 1 112" of the adopted International Building Cocle(IBC),the International Residential Code(IRC.),the Florida
into the wood framing. For 2X wood frame substrate(min.S.G.=0.42). Building Code(FBC)including HVHZ and the industry requirement for the stated conditions.
3. Host structure(wood buck,masonry,steel)to be designed and anchored to property transfer all loads 2. All glazing shall conform to ASTIVI E 1300,
to the structure. The host structure is the responsibility of the architect or engineer of record for the 3. At minimum,glazing is 3mm annealed-1 imm airspace-3mm annealed-2mm PVB Intertayer by
project of installation. Addendum to INAMI DuPont-3mm annealed.
Certificacion NO: N10115G7.04-R3 4, Use structural or composite shims where required.
Reviewed By:
This schedule addresses only the fasteners required to anchor the Date Reviewed: 07/25/2017
window to achieve the rated design pressure up to the size limitations
noted. It is not intended as a guide to the installation process and does PROJECT ENCUiEER: DATE:
not address he sealing consideration that may arise in different wall 06/30/2015 3737 Lakeport Blvd
conditions. For the complete installation procedure.see the instructions DRAWN BY: SCALE: Klamath Falls,OR.97601
packaged with the window or go to D.Vezo NTS J6 '9 Phone: (800)535-3936
C�IEIXED BY: 11 ILE'
VAOVW.jeld-weri,corii/resources/itistallition. J. Kantola
APP1'OVED SIY: Premium Atlantic Vinyl Impact Single Hung Window
DISCLAIMER: --1
This drawing and its contents are confidential and are not to be PAR008F.Cr xU
reproduced or Copied in whole or in-Inc.part or used or disclosed toothers D 729
except as authorized by JELD-WEN
JDEIVIFIeR,4. OLANT NAME AND UXATION: CAI)OWG No
P
'AS TESTED' NCTL210-3875-1-FBC 1 001