HomeMy WebLinkAboutProduct Approval (2) Florida Building Code Online Page 1 of 2
avis Home Log In User Registration Hot Top[. Submit Surcharge j Stats&Facts j Publications i Contact Us i acts Site Map Links Search
b
d �4
Product Approval
§ y USER:Public User
Product Aopmvai Menu>Product or Application Search>Aoprication List>Application Detail RECEIVED
• �' _ FL 4 FL14317-R10
Application Type Revision FEB 1�8 ?7 0
Code Version 2017
Application Status Approved
ST. Lucie County, Permitting
Comments
Archived
Product Manufacturer Boral Roofing/Monierl-ifetile
Address/Phone/Email 7575 Irvine Center Drive
Suite 100
Irvine,CA 92618
(602)269-2288 Ext 8320
thomas.jemmett@boral.com A'lie Copy
Authorized Signature Thomas Jemmett
thomas.jemmett@boral.com
Technical Representative Adrian Cooper
Address/Phone/Email 135 NW 20th Street REVIEWED FOR
Boca Raton,FL 33431 i'�
(954)520-5461 COMPLIANCE
ODE COMP
acoopeer@minieriifetile.com p f�
Quality Assurance Representative ST-A L U C I E C O D N T °Y
Address/Phone/Email B 0 C C
Category Roofing
Subcategory Underlayments
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed
Florida Professional Engineer
Li Evaluation Report-Hardcopy Received
Florida Engineer or Architect Name who developed Robert J.M.Nieminem
the Evaluation Report
Florida License PE-59166
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 08/21/2020
Validated By John W.Knezevlch,PE
✓:Validation Checklist-Hardcopy Received
Certificate of Independence FL14317 R10 COI 2018 01 COI NIEMINEN.odf
Referenced Standard and Year(of Standard) Standard Year
ASTM D1970 2015
FRSA/TRI(April 2012)04-12 2012
UL 1897 2012
Equivalence of Product Standards
Certified By
Sections from the Code
httr, /%xnarnv flnrirlahnilrlina nra/nr/nr ann ritl asnx9naram=wCTF.VXOwtDashCIJITKel2OBo... 3/5/2019
Florida Building Code Online Page 2 of 2
Product Approval Method Method 1 Option D
Date Submitted 10/12/2018
Date Validated 10/15/2018
Date Pending FBC Approval 10/22/2018
Date Approved 12/11/2018
Summary of Products
FL# Model,Number or Name Description
14317.1 Boral Roof Underlayments Roof underiayments for use in prepared roof assemblies
Limits of Use Installation Instructions
Approved for use in HVHZ:No FL14317 R10 II 2018 10 FINAL ER BORAL Underiavments FL14317-
Approved for use outside HVHZ:Yes R10.pd
Impact Resistant:N/A Verified By: Robert 1. M.Nieminen PE-59166
Design Pressure: +N/A/-210 Created by Independent Third Party:Yes
Other:1.)The design pressure in this Evaluation Reports
application pertains to a particular underlayment FL14317 R10 AE 2018 10 FINAL E BORALUndedayments_FL14317-
system for use under foam-on tile systems. Refer R10.adf
to ER Section 5.6.4.2.)Refer to ER Section 5 for Created by Independent Third Party:Yes
Limits of Use.
Hack N-
Contact Us::2601 Blair Stone Road,Tallahassee FL 32399 Phone:850-487-1824
The State of Florida is an AA/EEO employer.Copyright 2007-2013 State of Florida.::Privacy Statement::Accessibility Statement::Refund Statement
Under Florida lave,email addresses are public records.If you do notwant your e-mail address released in response to a public-records reques4 do not send electronic
mail to this entity.Instead,contact the office by phone or by traditional mail.If you have any questions,please contact 850.487.1395.-Pursuant to Section 455.275
(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter 455,F.S.must provide the Department with an email address If they have one.The
emails provided may be used for official communication with the licensee.However email addresses are public record.If you do not wish to supply a personal address,
please provide the Department with an email address which can be made available to the public.To determine if you are a licensee under Chapter 455,F.S.,please
click ham.
Product Approval Accepts:
ou® ,
Credit Card
Safer._
httn-dvju w floriclahuilding.orcu/m/nr ann dtl.ast)x?naram=wGEVXOwtDasbCUITKel20Bo... 3/5/2019
. . .
)�
mmEO .
certifica toqfAum^ummmoozvas
353Christian Street, Unit#13
Oxford,CT 06478
U(4 (203)262-9245
ENGINEER EVALUATE TEST CONSULT CERTIFY
Boral Roofing Evaluation Report M35710.12.10-Rll
7575 Irvine Center Drive,Suite 100 FL14317-RIO
Irvine,CA.92618 Date of Issuance:12/21/2010
(602)269-2288 Revision 12:10/12/2018
Soopc:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State ofFlorida.The documentation submitted has been reviewed by Robert Nieminen,
P.E.for use of the product underthe Florida Building Code and Florida Building Code,Residential Volume. The products
described herein have been evaluated for compliance with the 611 Edition(2017)Florida Building Code sections noted
herein.
OESCmprmm: 8onalRoof UmderlaVments
L*osums: Labeling shall be in accordance with the requirements of the Accredited Quality Assurance Agency noted
herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s)changes,the referenced ,
Quality Assurance documentation changes,or provisions of the Code that relate to the product change. Acceptance of
this Evaluation Report by the named client constitutes agreement to notIfV Robert Nieminen, P.E. of any changes to the
product(s),the Quality Assurance or the production facility location(s). 0EK00ETC LLC requires ocomplete review of
this Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT:The Evaluation Report number preceded by the words "N[K4OIetc. Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed,then it shall be done in its entirety.'
|mspccnom:Uponrequest, acopyofthisendreEva|uadonReportshuUbeproxidedtotheuoerbythemanuta«turerur
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists ufpages 1through O.
Prepared by:
Robert],08.Nlenninen, 9.2. nefacsimile seal appearing was authorized wRobert
Florida Registration No.59165,Florida D0AAE1f83 w/erninen'P.E.on 10/12/2018This does not serve as an
electronically signed document
CEmmovnowcr-}mosPEmoawce:
1. NEN1OBT,LLC does not have,nor does it intend to acquire or will it acquire,a,financial interest in any company manufacturing or
distributing products itevaluates.
2. NEMO ETC,LLC is not owned,operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Niemioen,P.E.does not have nor will acquire,vfinancial interest inany company manufacturing vrdistributing products for
which the evaluation reports are being issued.
4. Robert Nleminen,P.E.does not have,nor will acquire,a financial interest in any other entity involved in the approval process ofthe
product.
S. This babuilding code evaluation. Neither mEKxoETC,LLC nor Robert miem/nen,p.E.are,inany way,the Designer ofRecord for any
project onwhich this Evaluation Report,orprevious versions thereof,is/was used for permitting ordesign guidance unless retained
specifically for that purpose.
ON EMO etc.
ROOFING COMPONENT EVALUATION:
Product Category: Roofing
Sub-Category: Underlayment
Compliance Statement: Boral Roof Underlayments, as marketed by Boral Roofing, have demonstrated
compliance with the following sections of the 61h Edition (2017) Florida Building Code through testing in
accordance with the following Standards. Compliance is subject to the Installation Requirements and Limitations
/Condition"s of Use set forth herein.
Si
-AND,-®
.Section Property Standard Year
1504.3.1 Wind Uplift UL 1897 2012
1507.1.1,T1507.1.11 Physical Properties ASTM D1970 2015
1507.2.9.2
1507.3.3 Physical Properties FRSA/TRI April 2012(04-12) 2012
.Enti Examination Reference Date
ERD(TST 6049) Physical Properties M36790.07.11 09/30/2011
ERD(TST 6049) Physical Properties B40380.08.12 08/28/2012
ERD(TST 6049) Tensile Adhesion/LTA C41420.09.12-2 09/11/2012
ERD(TST 6049) Adhesion 841940.09.12 09/13/2012
ERD(TST 6049) Tensile Adhesion/LTA B47390.07.14-1 07/31/2014
ERD(TST 6049) Tensile Adhesion/LTA B47390.09.14 09/04/2014
OC(PDM1838) Physical Properties Equivalency statement 11/02/2017
PRI(TST 5878) ASTM D1970 NEI-031-02-02;REV 10/27/2010
PRI(TST 5878) ASTM D1970 NEI-029-02-01:REV 12/03/2010
PRI(TST 5878) Tensile Adhesion/LTA NEI-046-02-01REV 12/17/2010
PRI(TST 5878) FRSA/TRI April 2012 NEI-076-02-01 02/14/2011
PRI(TST 5878) ASTM D1970 NEI-034-02-02 01/29/2013
PRI(TST 5878) Wind Uplift BORR-001-02-01 03/17/2015
PRI(TST 5878) Wind Uplift BORR-005-02-01 06/24/2015'
PRI(TST 5878) Tensile Adhesion/LTA DAPF-002-02-01 03/08/2018
PRI(TST 5878) ASTM D1970(adhesion) OCF-443-02-01 10/11/2018
UL,LLC.(QUA 9625) Quality Assurance Service Confirmation Exp.08/21/2020
'•ea ® e
4.1 BoralO TileSeal 50r is a nominal 50-mil thick, polyester-surfaced, self-adhering SBS modified bitumen roof
is ASTM D1970.
4.2 Boral0 T' a nominal 60-mil thick, polyester-surfaced, self-adhering SBS modified bitumen roof
nt;meets ASTM D1970 and FRSA/TRI 04-12.
4.3 Boral® MetalSeal"T is a nominal 60-mil thick, polyester-surfaced, self-adhering SBS modified bitumen roof
underlayment;meets ASTM D1970 and FRSA/TRI 04-12.
4.4 GatorSeal®is a nominal 55-mil thick,granular-surfaced,fiberglass reinforced,self-adhering SBS modified bitumen
roof underlayment;meets ASTM D1970.
4.5 Citadel®Plus is a nominal 48-mil thick,fabric-surfaced,fiberglass reinforced,self-adhering SBS modified bitumen
roofing underlayment for use as a base-layer in multi-ply underlayment systems,meets ASTM D1970.
NEMO ETC,LLC Evaluation Report M35710.12.10-1111
6ertfcateofAuthor4ation#32455 6"EDITION(2017)FBC NON-HVH2 EVALUATION FL14317-R10
Boral Roof Underlayments,(602)269-2288 Revision 11:10/12/2018
Page 2 of 8
EM® etC.
5.1 This is a building code evaluation. Neither NEMO ETC,LLC nor Robert Nieminen,P.E.are,in any way,the Designer
of Record for any project on which this Evaluation Report,or previous versions thereof,is/was used for permitting
or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in FBC HVHZ jurisdictions.
5.3 Fire Classification is not part of this Laboratory Report;refer to current Approved Roofing Materials Directory for
fire ratings of this product.
5.4 Boral Roof Underlayments may be used with any prepared roof cover where the product is specifically referenced
within FBC approval documents. If not listed, a request may be made to the Authority Having Jurisdiction for
approval based on this evaluation combined with supporting data for the prepared roof covering.
5.5 Allowable Roof Covers: Table 1 pertains to use of each listed underlayment by-itself beneath the stated roof
covers. Refer to the installation instructions for multi-ply underlayment options.
Asphalt Adhesive-set Wood Shakes
Underlayment Shingles Nail-On Tile Tile Metal &Shingles Slate
Boral Tile 0 Yes No No Yes Yes Yes
Boral TileSeal"T Yes Yes Yes Yes Yes Yes
(See 5.5.1)
Boral MetalSeal"T Yes Yes Yes Yes Yes Yes
(See 5.5.1)
GatorSeal Yes No No No Yes Yes
5.5.1 "Adhesive-set Tile"is limited to use of following Approved the adhesives/underlayment combinations.
® e z e • o
Adhesive Florida Product
Approval Underlayments
DAP Foam Touch'n Seal StormBond Roof Tile Adhesive FL14506 Boral TileSeal"T or Boral MetalSeal"T
DAP Foam Touch'n Seal StormBond 2 Two-Component FL21374 Boral TileSeal"T or Boral MetalSeal"T
Polyurethane Roof Tile Adhesive
Dow TILE BONDTM Roof Tile Adhesive FL22525 Boral TileSeal"T or Boral MetalSeal"T
ICP Adhesives Polyset®AH-160 FL6332 Boral TileSeal"T or Boral MetalSeal"T
ICP Adhesives Polyset®RTA-1 FL6276 Boral TileSeal"T or Boral MetalSeal"T
1 Refer to Tile Manufacturer's orAdhesive Manufacturer's Florida Product Approval for overturning Moment Resistance Performance.
NEMO ETC,LLC Evaluation Report M35710.12.10-1111
Certificate of Authorization#32455 6-"'EDITION(2017)FBC NON-HVHZ EVALUATION FL14317-R10
Boral Roof Underlayments,(602)269-2288 Revision 11:10/12/2018
Page 3 of 8
(NNEMOletc.
5.6 All bates;
5.6. Direct- and to Deck.---,0
Citadel Plus,Boral 'eSeal 501T,Boral TileSeal",Boral MetalSeal"T or GatorSeal:
➢ PI unpr(med or primed with ASTM D41 primer).
Boral TileSeall or Boral MetalSeal"T:
➢ OSB(unprimed or primed with ASTM D41 primer).
Note.Refer to Section 5.6.4 for uplift limitations associated with direct-deck underlayment installations where the
overlying roof cover is adhesive-set tile roofing
5.6.2 Bond to Base Laver Underlavment:
Citadel Plus,Boral TileSeal 50"T,Boral TileSeal"T,Boral MetalSeal"T or GatorSeal:
➢ ASTM D226,Type II felt;Citadel Plus.
For installations under mechanically attached prepared roof coverings, base layer shall be attached per minimum
codified requirements. For installations under adhesive-set tile systems,base layer shall be attached per minimum
requirements of FRSA/TRI April 2012(04-12),Appendix A,Table 1,or as listed in Section 5.6.4 herein,or as tested
in accordance with FBC 1504.3.1.
5.6.3 Bond to Other Substrate Types:
Citadel Plus,Boral TileSeal 50"T,Boral TileSeal"T,Boral MetalSeal"T or GatorSeal:
➢ ASTM D41 primed metal(e.g.,flashing metal,valley metal,etc.).
Boral TileSeal"T:
➢ Huber Zip Deck(unprimed or primed with ASTM D41 primer);Dens Deck Prime.
Note: For installation under mechanically attached prepared roof coverings, insulation shall be attached per
minimum requirements of the prepared roof covering manufacturer's Product Approval.
5.6.4 Wind Resistance for Underlavment Systems in Adhesive-set Tile Applications: FRSA/TRI April 2012(04-12)does
not address wind uplift resistance of all underlayment systems beneath adhesive-set the systems, where the
underlayment forms part of the load-path. The following wind uplift limitations apply to underlayment systems
that are not addressed in FRSA/TRI April 2012(04-12) and are used in adhesive-set tile applications. Maximum
Design Pressure is the result of testing for wind load resistance based on allowable wind loads, and reflects the
ultimate passing pressure divided by 2(the 2 to 1 margin of safety per FBC 1504.9 has already been applied).Refer
to FRSA/TRI April 2012(04-12),Appendix A,Table 1A or FBC 1609 for determination of design wind loads
#1 Maximum Design Pressure=-120.0 post:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Primer: (Optional)ASTM D41 to the plywood deck
Base Ply: Citadel Plus,self-adhered
Cap Sheet: Boral TileSeal"T or Boral MetalSeal"T,self-adhered,and back-nailed within the selvedge-edge side laps
using 12 ga.x 1X"ring shank nails through 32 ga.,1-5/8"diameter tin caps spaced 12-inch o.c.
#2 Maximum Design Pressure=-142.5 psf:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Ply: None
Cap Sheet: Boral TileSeal"T or Boral MetalSeal"T,self-adhered and back-nailed within the selvedge-edge side laps
using 12 ga.x 1'/0"ring shank nails through 32 ga.,1-5/8"diameter tin caps spaced 12-inch o.c.
MEMO ETC,LLC Evaluation Report M35710.12.10-1111
Certificate ofAuthorkation#32455 6'"EDITION(2017)FBC!'JON-HVHZ EVALUATION FL14317-R10
Boral Roof Underlayments,(602)269-2288 Revision 11:10/12/2018
Page 4 of 8
*NEMOletc.
#3 Maximum Design Pressure=-202.5 psf:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Primer: Tropical Roofing Products#410 Quick Dry Primer or other ASTM D41 primer to the plywood deck
Base Ply: None
Cap Sheet: Boral TileSeal"T or Boral MetalSeal"T,self-adhered,and back-nailed within the selvedge-edge side laps
using 12 ga.x 1'/<"ring shank nails through 32 ga., 1-5/8"diameter tin caps spaced 12-inch o.c.
#4 Maximum Design Pressure=-210.0 psf:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Primer: KARNAK#89 Sta-Tak Primer to the plywood deck
Base Ply: None
Cap Sheet: Boral TileSeal"T or Boral MetalSeal"T,self-adhered,and back-nailed within the selvedge-edge side laps
using 12 ga.x 1%"ring shank nails through 32 ga.,1-5/8"diameter tin caps spaced 12-inch o.c.
#5 Maximum Design Pressure=-120.0 psf:
Deck: Min. 2,500 psi structural concrete to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Primer: ASTM D41 to the concrete deck
Base Ply: (Optional)Citadel Plus,self-adhered
Cap Sheet: Boral TileSeal"T or Boral MetalSeal"T,self-adhered
5.6.4.1 Note:For adhesive-set the systems,if there is a base ply or mid-ply of Citadel Plus in the system,the project design
pressure requirements may not exceed-120 psf.
5.7 Exposure Limitations:
GatorSeal shall not be left exposed for longer than 30-days after installation,prior to placement of final roof cover.
Boral TileSeal 50w, Boral TileSeal"T or Boral MetalSeal"T shall not be left exposed for longer than 180-days after
installation,prior to placement of final roof cover.
Citadel Plus,for use as a base-layer in a multi-ply underlayment system,shall not be left exposed for longer than
180-days after installation,prior to placement of subsequent underlayment layer.
5.8 Tile Slippage Limitations FFRSA/TRI April 2012(04-12)1•
When loading roof tiles on the underlayment in direct-deck tile assemblies,the maximum roof slope shall be as
follows. These slope limitations can only be exceeded by using battens during loading of the roof tiles.
Underlayment Tile Profile Staging Method Maximum Slope
Boral TileSeal4T or Flat Max.10-tile stack 6:12
Boral MetalSeal"T Lugged Max.10-tile stack 6:12
6. Boral oof Underlayments s�eeailed in accordance with Boral Roofing published installation instructions
subject to=nyoo=edecking
sction 5 herein and the specifics noted below.
6.2 Re-fasten panels, and check for protruding nail heads. Sweep the substrate thoroughly to
remove any dust and debris prior to application,and prime the substrate(if applicable).
6.3 Install self-adhering underlayment when ambient and surface temperatures are minimum 40*F and rising.
MEMO ETC,LLC Evaluation Report M35710.12.10-R11
Certificate of Authorization#32455 6-EDITION(2017)FBC NON-HVHZ EVALUATION FL14317-R10
Boral Roof Underlayments;(602)269-2288 Revision 11:10/12/2018
Page 5 of 8
4NEMO I etC.
6.4 Citadel.Plus:
6.4.1 Citadel Plus is limited to use as a base or mid-layer in multi-ply underlayment systems beneath Boral TileSeal 501T,
Boral TileSeall or GatorSeal.
6.4.2 Slope limitations are those associated with the top-layer underlayment.
6.4.3 Direct to Deck:
Cut the membrane into manageable lengths;typically 10 to 12 ft. Align the membrane parallel to the roof edge,
extending over by Y-inch. Fold the membrane away from the edge onto itself. Remove the release sheet. Place
the membrane with the exposed rubberized asphalt onto the deck,pressing firmly into place. Roll into place with
a weighted roller.
Fasten the top edge of the sheet to the deck with corrosion resistant roofing nails, nails & tin-tags or 1-inch
diameter plastic or steel cap nails spaced maximum 12-inch o.c. Overlap successive courses the entire width of the
black-selvedge area,minimum 2 inches(horizontal lap)and minimum 6"end (vertical)laps.
Install final underlayment layer atop Citadel Plus per 'direct-to-deck' instructions for Boral TileSeal 50"T, Boral
TileSeal"T'Boral MetalSeal"T or GatorSeal.
6,4.4 To Base Sheet:
Install base sheet of ASTM D226,Type II felt in accordance with Code requirements or install base ply of Citadel
Plus in accordance with Boral Roofing published installation instructions and Section 6.4.3 and when used as part
of a multi-ply system.
Install optional Citadel Plus as a mid-ply in accordance with Boral Roofing published installation instructions and
Section 6.4.3,
Install final underlayment layer atop Citadel Plus per 'direct-to-deck' instructions for Boral TileSeal 501, Boral
TileSeall or GatorSeal.
Note:For adhesive-set tile systems,if there is a base ply or mid-ply of Citadel Plus in the system,the project design
pressure requirements may not exceed-120 psf.
6.5 Boral Tileseal 50HT: ,
6.5.1 Shall be installed in compliance with the requirements for ASTM D1970 underlayment in FBC Table 1507.1.1 for
the type of prepared roof covering to be installed.
6.5.2 Do not use Boral TileSeal 501 on roof pitches less than 2:12.
6.5.3 Non-Tile Applications,Direct to Deck:
Cut the membrane into manageable lengths,typically 10 to 12 ft.Align the membrane parallel to the roof edge,
extending over by%-inch. Fold the membrane away from the edge onto itself. Remove the release sheet. Place
the membrane with the exposed rubberized asphalt onto the deck,pressing firmly into place. Roll into place with
a weighted roller.
Fasten the black selvedge edge to the deck with corrosion resistant roofing nails,nails&tin-tags or 1-inch diameter
plastic or steel cap nails spaced maximum 24-inch o.c.for slopes below 7:12 and maximum 12-inch o.c.for slopes
7:12 and greater. Overlap successive courses the entire width of the black-selvedge area,minimum 3-inch.
Seal under end (vertical) laps using approved mastic, or use Joined and Folded Seam or Inverted Sheet Seam
method detailed in Boral Roofing published installation instructions.
NEMO ETC,LLC Evaluation Report M35710.12.10-1111
Certificate of Authorfwdon#32455 9'EDITION(2017)FBC NON-HVHZ EVALUATION FL14317-R10
Boral Roof Underlayments,(602)269-2288 Revision 11:10/12/2018
Page 6 of 8
' .
NNEMOjetc.
6�.4 Non-Tile Applications,to Base Sheet:
Install ASTM D226Type || felt in accordance with Code requirements or install Citadel Plus in accordance with
Dora|Roofing published installation instructions and Section G/k
Install Boral TileSeal 501 in accordance over ASTM D226,Type 11 felt or Citadel Plus with Boral Roofing published
installation instructions and Section 6.5.3,except end(vertical)laps,described below.
Apply SBS Mastic under all end(vertical)laps or any other laps where the self-adhering bituminous underside is in
contact with the fabrictop surface,rolling the interface into place with a weighted roller,
6.6
6.6.1 Shall»einstalled mcompliance with the requirements for ASTM "1,,"===...'`"~..^.. ,~~Table^~-'._'-for
the type pfprepared roof covering tobeinstalled.
6,6.2 Donot use GatnrSee|nnroof pitches less than Z:12.
6.6.3 Non-Tile applications,Direct to Deck:
Cut the membrane into manageable lengths,typically 1Oto1Zft.Align the membrane parallel tothe roof edge,
extending over byA-inoh, Fold the membrane away from the edge onto itself. Remoxedhere|easesheet- P|ooe
the membrane with the exposed rubberized asphalt onto the deck,pressing firmly into place. Roll into place with
aweighted roller.
Fasten the black selvedge edge to the deck with corrosion resistant roofing nails,nails&tin-tags or I-Inch diameter
plastic or steel cop nails spaced 24-inch o.c. for slopes below 7:12 and 12'inch n.c.for slopes 7:12 and greater.
Overlap successive courses the entire width of the black-selvedge area,minimum 3-inch.
Seal end (vertical) laps using SBS Mastic under all side (vertical) laps or any other laps where the self-adhering
bituminous underside is in contact with the granular or mineral top surface,rolling the interface into place with a
weighted roller,or using the Inverted Sheet Seam detailed in Boral Roofing published installation instructions.
6.64 Non-Tile Aoolications,to Base Sheet:
Install ASTM D226,Type || felt in accordance with Code requirements or install Citadel Plus in accordance with
8ora|Roofing published Installation instructions and Section 6.4.
Install GatorSeal over ASTM D226,Type 11 felt or Citadel Plus in'accordance with Boral Roofing published installation
instructions and Section 6.6.3 except end (vertical)laps,described below.
Apply SBS Mastic under all side(vertical)laps or any other laps where the self-adhering bituminous underside is in
contact with the granular top surface,rolling the interface into place with aweighted roller.
Kr IHT.
6.7
6.7.1 ooao be installed in compliance with the ,cqu/n=n'eota for*S...^ "1='"".."=.`"'."e..^". .~~ .a~.~1507,^.1 for
the type ufprepared roof covering tobeinstalled.
Do not use Boral »r or Boral MetalSeallonroofpitches|essthan2:12.
5,7-.3--_Non-TIIe Applications,Direct to Deck:
primer and allow to dry prior to installation. Cut the membrane into
manageable lengths,typically 1Oto12ft.Align the membrane parallel tothe roof edge,extending over byY4'inch.
Fold the membrane away from the edge onto itself. Remove the release sheet. Place the membrane with the
exposed rubberized asphalt onto the deck,pressing firmly into p|ace. Roll into place with aweighted roller.
Fasten the black selvedge edge to the deck with roofing nails, nails&tin-tags or 1-inch diameter plastic or steel
cap nails spaced maximum 12-Inch o.c. Overlap successive courses the entire width of the black-selvedge area,
minimum 3-inch.
Seal under all end (vertical) laps using approved mastic or use Inverted Sheet Seam method detailed in Bora/
Roofing published installation instructions.
cvo|u�mn�po�mos7u�.z�m'nll
m�mosrcu�
Certificate nya"m"riz"mmmoma v-EDITION pocr>ecmomwvozEVALUATION ru4317-nm
mvra|Roof unuewavments;(602)269-2288 Revision 11'1n/12/2o1m
Page zofa
'
' .
ANE M0UU
etc"
6.7.4 Non-Tile Applications,to Base Sheet:
Install ASTM DZ26,Type Ufelt inaccordance with Code requirements orinstall Citadel Plus inaccordance with
Dora\Roofing published installation instructions and Section 6A. .
Install 8ora|TUeSeaynor8ora|K8etalSea|nrover ASTM D226,Type||felt orCitadel Plus 7naccordance with 8om(
Roofing published installation instructions and Section 6.7.3,except end(vertical)laps,described below.
Apply SBS Mastic under all end(vertical)laps or any other laps where the self-adhering.bituminous underside is in
'
contact with the fabric top surface,rolling the interface into place with a weighted roller.
6.7.5 Tile Applications:
Reference ismade toFRSA/TRIApril 2012(44-12)Installation Manual and Table 1herein,using the instructions
noted above aoaguideline.
FormechanicaUyfastonedd|enoofingpver2-plyaystex,00neist/n8mf8aseSheetandse|f-adhohnQtopsheet(s),
Base Sheet fastening shall benot less than FRSAfTMtApril 2012(04-12),Table 1.
For adhesive-set tile applications,refer toSection S.a.4herein.
Note:For adhesive-set tile systems,/fthere isa base ply o,mid-ply ofCitadel Plus|nthe system,the project.design '
pressure requirements may not exceed-12Opst
'Refer toSection 5.8forti|estaging limitations. Battens must beused for all tile installations atop Bora|-nleSea}*r
orBora|KUetaySea|»rwith roof pitches of2Y2to less than 3:12. 8ora|Roofing's Elevated Batten System orcounter
battens are required.
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the Installation of
this product.
Brentwood,NH
'
`END OFEVALUATO0REPORT-
.
NEW ETC,LLC Evaluation Report Mssr1u.1�1n�ll
c�*� ��
vAom"u�a�mx�s O"eo�mm�oo � *
(2017)FEC F1.14317-1110,ow �x�z�xu�
Boral Roof Underlaymentv(602)269-2298 Revision 1u10/121m18
Page uovo