HomeMy WebLinkAboutBuilding Permit Application All APPLICABLE INFO MUST BE COMPLETED FOR APPLICATION TO BE ACCEPTED 2�
Date: �_��_ 2,0 Permit Number: t���� 5[3
Ilk RECEIVED
• FEB 2'® 2020
Building Permit Application PermittingPevartment
Planning and Development Services St.Lucie Cpy*
Building and Code Regulation Division
2300 Virginia Avenue,Fort Pierce FL 34982
Phone: (772)462-1553 Fax: (772)462-1578 Commercial Residential
PERMIT TYPE:
PROPOSED IMPROVEMENT LOCATION:
Address: 0/ `7 5L= .5c'.)1.�4_Z_
Property Tax ID#: l 5Yo— Q G)Z 000 --Z- Lot No. Z Z
Site Plan Name: ( n Block No.
Project Name: Pcuy d- P�v-
DETAILED DESCRIPTION OF WORK:
�l CM00 E 1 �► �L, Y7,o0dc Sr S ��( �v 1,�. -S5 lam.T S
CONSTRUCTION INFORMATION:
Additional work to be performed under this permit-check all that apply:
_Mechanical _Gas Tank _Gas Piping _Shutters indows/Doors
n /
_Electric _Plumbing _Sprinklers _Generator ZRoof T�L Pitch
CD
Total Sq. Ft of Construction: c�2 Sq. Ft.of First Floor:
Cost of Construction:$_ �'��� Utilities: _Sewer _Septic Building Height:
OWNER/LESSEE: CONTRACTOR:
Name (� (�(_ Name:
Address: L/ J_ `1 Company: �ec,h �►-c, �UnS ,�r,G��r:•
City: Q-5,L, State: ( Address: 4/o 3 T' S w
Zip Code: Fax: City: +==-1" State.--F(
Phone No. Zip Code: :2 tf L q `'% Fax:
E-Mail: Phone No 7 Z Z LlASI vq'7 3 C)
Fill in fee simple Title Holder on next page(if different E-Mail 60un4 ryckwi 19 ov H0,,X . Cbz
from the Owner listed above) State or County License L 2�
If value of construction is$2500 or more,a RECORDED Notice of Commencement is required.
If value of HVAC is$7,500 or more,a RECORDED Notice of Commencement is required.
SUPPLEMENTAL CONSTRUCTION LIEN LAW INFORMATION:
DESIGNER/ENGINEER: 4 Not Applicable MORTGAGE COMPANY: _Not Applicable
Name: Name:
Address: Address:
City: State: City: State:
Zip: Phone Zip: Phone:
FEE SIMPLE TITLE HOLDER: _Not Applicable BONDING COMPANY: Not Applicable
Name: Name:
Address: Address:
City: City:
Zip: Phone: Zip: Phone:
OWNER/CONTRACTOR AFFIDVIT:Application is hereby made to obtain a permit to do the work and installation as indicated.
I certify that no work or installation has commenced prior to the issuance of a permit.
St. Lucie County makes no representation that is granting a permit will authorize thepermit holder to build the subject structure
which is in conflict with any applicable Home Owners Association rules,bylaws or and covenants that may restrict or prohibit such
structure. Please consult with your Home Owners Association and review your deed for any restrictions which may apply.
In consideration of the granting of this requested permit,I do hereby agree that 1 will,in all respects,perform the work
in accordance with the approved plans,the Florida Building Codes and St. Lucie County Amendments.
The following building permit applications are exempt from undergoing a full concurrency review:room additions,
accessory structures,swimming pools,fences,walls,signs,screen rooms and accessory uses to another non-residential use
"WARNING TO OWNER: YOUR FAILURE TO RECORD A NOTICE OF COMMENCEMENT MAY RESULT IN YOUR PAYING
TWICE FOR IMPROVEMENTS TO YOUR PROPERTY. A NOTICE OF COMMENCEMENT MUST BE RECORDED AND
POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION. IF YOU INTEND TO OBTAIN FINANCING, CONSULT
WJITH YOUR LENDER OR AN ATTORNEY BEFORE RECORDING YOUR TICE OF COMMENCEMENT."
Signature of Owner/Lesse f
ontractor as Agent for Owner =FLO
Contractor/License Holder
STATE OF FLO !Y'
COUNTY OF ��1C`f� COUNTY OF
—0 �Lc)
The f ing ins nt was acknowledged before me The forgoing instrument was acknowledged before me
this dayof va,a 207—b by this-day of' -e r 20gM)by
Name of person making statement. Name of person making statement.
Personally Known OR Produced Identification Q Personally Known OR Produced Identification
Type of Iden ' tion Type of Identificat' n Q '\
Pro duc ��_, Produced-DL L—r (o 71WA-)
-) v
4A 0 At
(S' a ure of Notary Public-State of Florida) (Si nature of Notary Pub! r P. KATHERINE LYNN POWELL
Commission No. �) Z r'►u•
(Sea EMIL�p GIL Commission No.� Notaa]j�c Pu ++c•State 4 70rida
4••; Cbttl�ii���Or r GG 346101
t' Notary Public•State of Florida '..'�of��` My Comm.Expires Jun 25.2023
Commission p GG 211245 "' h National Nota Assn.
My Comn.Expires Apr 25,2022
REVIEWS FRONT PLANS VEGETATION SEA TURTLE MANGROVE
COUNTER REVIEW REVIEW REVIEW REVIEW REVIEW REVIEW
DATE
RECEIVED
DATE
COMPLETED
ev.
I
JOSEPH E. SMITH, CLERK OF THE CIRCUIT COURT — SAINT LUCIE COUNTY
FILE # 4676705 OR BOOK 4385 PAGE 376, Recorded 02/20/2020 09:03:58 AM
NOTICE OF COMMENCEMENT
Permit No— 0 '�d3 Tax Folio No. �J�f L Z
v State of Florida County of St.Lucle
The undersigned hereby gives notice that improvement will be made to certain real property,and in accordance with Chapter 713,Florida Statutes,
L the following information is provided In this Notice of Commencement.
7 Lepl Description of Pr rty n reef ddress If 1 a (,(n 'S 5 L`r 5p)
General description of bnprovement: tSe.N ?-oDF
Owner Inflimation or Lessee information If the Lessee contracted for the improvement:
I Name N r'K
L Address AVE - L LIC_i Ell PL--
interest
L--
Interest in property:
�n Name and address of feesimple titleholder(if different from Owner listed above):
J n
Cn C mtractar's Name•
J Contractor Address: Phone Number.
USurety(if applicable,a copy of the payment bond is attached):Amount of bond:$
10 Name and address: %A Phone number
Lender Name: NA Phone Number:
Lenders address-
Persons vAtNn the Sbft of Florida designated byowner upon whore notices or oder documents may be served as prwlided by Section
I 713.L%1)(a)7.,Florida Stisdrtes:
Name: Phone Number.
Address:
U In addition to himself or herself,Owner de &IdN
7 designates of IAUVL�Tt.I IDYI$�CS.L�i�M to receive a copy ofthe
n Lienors Notice as provided in Section17 3.13(1)(b),Florida Statutes.
L Phone number of person or entity designated by owner.
J Swiration date of notice of commencement: (the expiration date may not be before the completion of construction and final payment to the
contractor.but will be 1 yearfrom the date of recording unless a different date is specified)
'7 WARNING TO OWNER:ANY PAYMENTS MADE BY THE OWNER AFTER THE EXPIRATION OF THE NOTICE OF COMMENCEMENT ARE CONSIDERED
IMPROPER PAYMENTS UNDER CHAPTER 713,PART I,SECTION 713.13,FLORIDA STATUTES,AND CAN RESULT IN YOUR PAYING TWICE FOR
IMPROVEMENTS TO YOUR PROPERTY.A NOTICE OF COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SiTE BEFORE THE FIRST
1 INSPECTION.IF YOU INTEND TO OBTAIN RNANCING.CONSULT WITH YOUR LENDER OR AN ATTORNEY BEFORE COMMENCING WORK OR
I RECORDING YOUR NOTICE OF COMMENCEMENT.
Under a Ity of perjury, that I have read the foregoing notice of commencement and that the facts stated therein are true to the best of
my kn !e ge and b of
y (Signature of Owner or Lessee, Ownees or Lessee's Authorized Officer/Director/Partner/Manager
0
(SignatoWs Title/Office)
The foregoing Instrumerrii wap acknowledged before me this day.of
NI G�• ' '
kQ as 1 I LJIa- 1 9/� for
Vndnt :e
f Pe ,,,,, officer,trustee) Party on behalf of whom Instrument was executed
.�`o"pv`�e LUCIA MEJIA
? Notary Public-Slate of Florida Personally known-or produced Identification
NotaryPu a da Commission*GG 047492
r Stamp Com ((5> r�m $�1�E@r{�Rtlov 15.2020 Type of Identification produced Ir•l rcehse
V 3'Y
I HEREBY CER IFYTIIATTIIIS DOCUMENT IS ATRUE AND CORRECTCUPY OFAN OFFTCIALRECORD 01t Digitally Signed b The Honorable Joseph E. Smith
DOCUMENTAUTHORILED BY LIWTO BE RECORDED OR FILED AND ACTUALLYRECORDED OR FILED1\ Date: 2020.D2.20 O�'�4:Jr2 -I)Jr:OO
TRE OFFICE OFTHEST.LUCIE COUNTY CLERK OFTHF.CIRCUIT COURT.
TmcmxUNILN"rMA•HAVEREDACTIONSASREQUIRED01 Reason: Electronically Certified Copy
.. T.nrAi nn! g01 Rolith Tnrlian Riirar nr. Fnrt Piarra_ FT. 340.10
.777771
. 2160 SW PomaDrive
Palm City, FL 34990
772)872-8034
V ......
Compliant with Florida Building Code 2017(6th ed.) OV- 667
cp
Compliant with Florida Product Approval Rule#61G20-3 2a
Compliant: Keystone Certifications
REVIEWED FOR
CODE COMPLIANCE
Product: 5 V Crimp 26GA Steel Roof Panel FBC Sec. 1507.4.BT. L U C I E CO U NTY
Yield strength: 50 ksi min. Attached to min. 15/32"plywood Wepd
Deck w/min.0.42 specific gravity with screws. 24" Coverage f6� 10
Rib Height 3/8" 0 2.,l2 0 1;-4
Corrosion Resistant Compliant: FBC Sec. 1507.4.3 File Copy
Fastener I (Method 1 Attachment):#9 x 1-1/2" Hex-Washer Head wood screw*to penetrate
3/16" min.thru deck or 5/8"embedment into wood plank. (*or sufficient length to meet
requirements)
Fastener 2 (Method 2,3, &4 Attachment):#10,x 1-1/2" Hex-Washer Head wood screw*to
penetrate 3/16" min.thru deck or 5/8" embedment into wood plank. (*or sufficient length
to meet requirements)
Underlayment: To be compliant with FBC Sec. Chart 1507.1.1
Slope: Shall be in compliance with FBC Sec. 1507.
See Fastener attachment specifications above
Install Details: Table A Allowable Loads METHOD 1 METHOD 2 METHOD 3 METHOD 4
DESIGN PRESSURE* -86 PSF -93.5 PSF -101 PSF -228 PSF
ROW SPACING 16"o.c. 16"O.C. 8"O.C. 6"ox.
FASTENER SPACING (ALONG Panel width) 12"o.c. 12"o.c. 12"o.c. 22"o.c.
FASTENER SIZE 1 #9 no #10 #10
Reference Data: ARCHITECTURAL TESTING,INC.TST ID#:1527
UL 580-06&1897-041 Test Report 1016893.01-450-18 05/02/14
Test Report F3366.01-450-18 12/18115
TAS 125-03 Test Report D05893.02-450-18 07/22/14
*EQUIVALENCY-ULIS97-04 is equivalent to test standard UL 1897-1&1 *Design pressure margin of safety 2.1
..Is'
U®Y
A 0 Pip
Locke Bowden,P.E.does not have,not will acquire a financial in I a �04�� s
g 'vtQ4 ri %tq . ?*%cturing or distributing product
under thWevaluation.
Locke Bowden,P.E.is not owned,operated,or controlled by a&coApar(#Prnbba&-ftur;P,or distributing products under this
report.
�-,w,
dr-
&p /717
N A
'14 FL17O22.1 5V Crimp (26GA Steel), 24"Wide Roof Panel - Details
Limit Ions:
1. Underlayment to be compliance with current Florida Building Code(FBC)2017 6t'ed.
2. Minimum slope to be compliant with Florida Building Code 2017 6th ed.,and per with Manufacturer's installation reference.
3. Products are compliant for State of Florida product approval per Rule 61 G20-3. Compliance Method: 1-D
4. Engineering analysis for"project specific approval by local authorities w/jurisdiction is allowed by other registered engineers.
5. Fire classification is not part of this acceptance.Shear diaphragm values are outside this report.
6.Support framing in compliance w/FBC 2017 6th ed., Chapter 22 for Steel, Chapter 23 for Wood and Chapter 16 for
Structural Loading.
7.This report does not imply warranty, installation, recommended product use outside of this report.
Fasteners-
*9■'-'2" in:or
M i1-112 Min.per Table A'for Row 5-VCrQnpRod Panel
Spadng and Design Pressures
Hex Washer Head Wood Screws
Q'
m
.9
m
m
Q-
Dedc
15132°or greater Plywood,or
Wood plank
14...
Y8"
o-1 1onALSTI P,iF7ior;S
Panel Profile
Nominal 12" Nominal 12"
O.G. O.C.
Fasten
L9 x 1-1/2"Min. or #10 x 1-112"Min.per
Table"A" Hex Washer Head Screw
Spaced 12"o.c.across the Panel Width
Panel Refer to Table"A"for Spacing Along Panel
Overlap Length
Deck-15/32"or greater
Plywood,or
-Wood plank
RE�E1*60
peC���,u�i�� ' Ii�LYAP6YY-D.�DE COUNTY
PRODUCT CONTROL SECTION
DEPART119EI MOF REGULATORY AND ECONOMIC RESOURCES(RER) l 1805 SW 26 Street,Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami,Florida 33175-2474
T(786)315-2590 F(786)315-2599
N@ T_7C7 OF A4'CZTP-f] A www.n9anfldzde.Kov/ecGaomy
Polyp;Iass USA Inc. -._..._REVIEWED
EV'
1111 W.Newport Center Drive ®� � � �
Deerfield Beach,FL 33448 E COMPLIANCE
SCOI°E: ST. LUCIE C U Ty
This NOA is being issued under the applicable rales and regulations governing theocop'struetion materials.The
documentation submitted has been reviewed and accepted by Miami Dade County RER-Product Control Section to be
used in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction(AHI).
This NOA shall not be valid after the expiration date stated below.The Miami-Dade County Product Control Section
(in Miami-Dade County)and/or the AHD(in areas other than Miami-Dade County)reserve the right to have this
product or material tested for quality assurance purposes.If this product or material fails to perform in the accepted
manner,the manufacturer will incur the expense of such testing and the AHIJ may immediately revoke,modify,or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the
requirements of the applicable building code.
This product is approved as described herein,and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCR PTION:Polyglass Polystick Underlayments File Copy
jLABELINNG:Each unit shall bear a permanent label with the manufacturer's name or logo,city,state and following
statement;"Miami-Dade County Product Control Approved",unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been Sled and there has been no change
in the applicable building code negatively affecting the performance of this product,
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any product,
for sales,advertising or any other purposes shall automatically terminate this NOA.Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISENJENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed
by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then
it shall be done in its entirety.
INSPECTION:A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA renews and revises NOA No.14-0717.08 and consists of pages 1 through 8.
The submitted documentation was reviewed by Gaspar J Rodriguez.
NOA No.: 15-0410.04
Expiration Date: 09/13t2l
Approval Date: 08/11/16
Page 1 of 9
ROOFING COMPONENT APPROVAL
Category: Roofing
Saab-Category: Underlayment
Material: SBS,APP Self-Adhering Modified Bitumen
PRODUCTS DESCRIPTION:
Test Product
Product Dimensions Specification Description
Polystick IR-Xe 65'x 333'/8" ASTM D 1970 A fine granular/sand top surface self-adherin&APP
Manufacturing Or 65'x 3' polymer modified,fiberglass reinforced,bituminous
Location#1  60 mils thick sheet material for use as an underlayment in sloped roof
assemblies. Designed as an ice&rain shield.
Polystick Dual Pro 61'x 333/8" TAS 103 and A rubberized asphalt self-adhering,glass-fiber/polyester
Manufacturing 60 mils thick ASTM D 1970 reinforced waterproofing membrane. Designed as a
Location#2 metal roofing and roof tile underlayment.
Polystick Tile Pro 61'x 3'33/a" TAS 103 and A rubberized asphalt self-adhering,glass-fiber/polyester
Manufacturing 60 mils thick ASTM D 1970 reinforced waterproofing membrane.Designed as a metal
Location#2 roofing and roof tile underlayment.
Polystick TU Max 658"x 31-3/8" TAS 103 and A rubberized asphalt self-adhering,polyester reinforced
Manufacturing 60 mils thick ASTM D 1970 waterproofing membrane. Designed as a a roof tile
Location#1  underlayment.
Polystick TU P 32'10"x 3'3 3/8" TAS 103 and A rubberized asphalt waterproofing membrane,glass-
Manufacturing 130 mils thick ASTM D 1970 fiber/polyester reinforced,with a granular surface
Location#2 designed for use as a file roof underlayment.
Polystick TV Plus 65'x 3'33/$' TAS 103 and A rubberized asphalt self-adhering,glass-fiber/polyester
(Surface Printing) 80 mils thick ASTM D 1970 reinforced waterproofing membrane.Designed as a metal
Manufactwing roofing and roof file underlayment.
Location#1 
Polystick MTS 6518"x 313/a" TAS 103 A homogeneous,rubberized asphalt waterproofing
Manufacturing 60 mils thick membrane,glass fiber reinforced with polyolefinic film
Location#2 an the upper surface for use as an underlayment for metal
��---- roofing,roof tile,slate tiles and shingle underlayment.
olystick MTS Plus '8"x 3'33/8" TAS 103 A homogeneous,rubberized asphalt waterproofing
Manufacturing mils thick membrane,glass fiber reinforced with polyolefinic film
Location#2 on the upper surface for use as an underlayment for metal
roofing,roof tile,slate tiles and shingle underlayment.
Elastollex S6 G 32'10"x 3'3 Ya" TAS 103 and Polyester reinforced,SBS modified bitumen membrane
Manufacturing ASTM D 6164 with a sanded back face and a granule top surface. For
Location#2 use in roof file underlayment systems.
NOA No.: 15-0410.04
vm
Eapiration Date: 09/13/21
R, Approval Date: 08/11/16
Page 2 of 9
MANUFACTURING PLMfTS:
1. Hazelton,PA
2. Minter haven,FL
EVO ENCS SUBM17MD
lest AUga22 Loot ldemtl nen° Test Name/RelRerlate
Trinity ERD P10870.09.08-R1 TAS 103 12/04/08
P10870.04.09 TAS 103/ASTM D4798&G155 04/13/09
P33360.06.10 ASTM D1970 07/01/10
P33370.03.11 TAS 103 03/02/11
P33370.04.11 ASTM D 1623 04/26/11
P36900.09.11 TAS'103/ASTM D4798&G155 09/01/11
P37300.10.11 TAS 110/ASTM D4798&D1970 10/19/11
P40390.08.12-2 ASTM D 1623 08/07/12
P37590.07.13-1 ASTM D6164 07/02/13
P45270.05.14 TAS 103,TAS 110&ASTM D1623 05/12/14
P46520.10.14 ASTM D1623 10/03/14
P44360.10.14 TAS 103&TAS 110 10/07/14
P43290.10.14 ASTM D 1970&TAS 110 10/17/14
PLYG-SC10130.06.16-3 TAS 103&TAS 110 06/27/16
PLYG-10130.06.16-1 ASTM D1970&TAS 110 06/27/16
PRI Asphalt Technologies PUSA-035-02-01 TAS 103 09/29/06
PUSA-055-02-02 TAS 103 12/10/07
PUSA-089-02-01 TAS 103/ASTM D4798&G155 07/06/09
Momentum Technologies,Inc. JX20117A TAS 103/ASTM D4798&G155 04/01/08
RXl4E8A TAS 103/ASTM D4798&G155 11/09/09
DX23D8B TAS 103/ASTM D4798&0155 02/18/10
DX231)8A TAS 103/ASTM D4798&G155 02/18/10
LABELING'.
1. All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer"s name or logo,city
and state of manufacturing facility and the following statement: "Miami-Dade County Product Control Approved"
or the Miami-Dade County Product Control Seal as show below.
B
BUILDING P F1°iRlC fill HQUI31IRM.1V A s:
Application for building permit shall be accompanied by copies of the following:
1.This Notice of Acceptance.
2.Any other documents required by the Building Official or applicable building code in order to properly evaluate the
installation of this materials.
N®A 1!T®.: 15-0410.04
v �
,., ? Expiration Date; 09/13/21
Approval Date: 08/11/16
Page 3 of
INSTALLATION PROCEDURES:
Deck Type 1: Wood,non-insulated
Deck Description: Min. 19/32"plywood or wood plank
System Type E(1): Anchor sheet mechanically fastened to deck,membrane adhered
Anchor/Base Sheet: One or more plies of ASTM D 226 Type H or ASTM D 2626.
Fastening: Per FBC 1518.2&1518.4 Nails and tin caps 12"grid,6"o.c.at a minimum 4"head lap.(for
base sheet only)
Membrane: Polystick IR-Xe,Polystick Dual Pro,Polystick Tile Pro,Polystick TU Max,Polystick
TU P,Polystick TU Plus,Polystick MTS or Polystick MTS Plus,self-adhered.
Surfacing: See General Limitations Below.
Deck Type 1: Wood,non-insulated
Deck Description: Min. 19/32"plywood or wood plank
System Type E(2): Anchor sheet mechanically fastened to deck,membrane adhered
Anchor/Base Sheet: One or more plies of ASTM D 226 Type 11 or ASTM D 2626.
Fastening: Per FBC 15182&1518.4 Nails and tin caps 12"grid,6"o.c.at a minimum 4"head lap.(for
base sheet only)
Membrane: ElastoIIex S6 G,hot asphalt applied
Surfacing: See General Limitations Below.
Deck Type 1: Wood,non-insulated
Deck Description: Min. 19/32"plywood or wood plank
System Type E(3): Base sheet mechanically fastened to deck, subsequent cap membrane self-adhered.
Anchor/Base Sheet: One or more plies of ASTM D 226 Type H or ASTM D 2626.
Fastening: Per FBC 1518.2& 1518.4 Nails and tin caps 12"grid,6"o.c.at a minimum 4"head lap.(for
base sheet only)
Ply Sheet: Polystick MTS Plus,self-adhered with minimum 3"horizontal laps and minimum 6"vertical
laps.
Membrane: Polystick TU Plus,self-adhered.
Surfacing: See General Limitations Below.
NOA No.: 15-0410.04
Expiration Date: 09/13/21
Approval Date: 08/11/16
Page 4 of 8
I1 sirA;i.E.A,mo131 REQUHREmzo
1. All nails in the deck shall be carefully checked for protruding heads. Re-fasten any loose deck panels,and
sweep the deck thoroughly to remove any dust and debris prior to application.
2. Place the underlayment over metal drip edge in accordance with RAS 111.
3. Place the first course of membrane parallel to the cave,rolling the membrane to obtain maximum contact.
Remove the release filen as the membrane is applied. All side laps shall be a minimum of-3-%"and end laps
shall be a minimum of 6 Roll the membrane into place after removing the release strip. Vertical strapping of
the roof with Polystick is acceptable. Membrane shall be back nailed in accordance with applicable building
code.
4. When applying the membrane in the valley,start at the low point and work to the high point,rolling the
membrane from the center outward in both directions.
5. For ridge applications,center the membrane and roll from the center outward in both directions.
6. Roll or broom the entire membrane surface so as to have full contact with the surface,giving special attention
to lap areas.
7. Flash vent pipes,stacks,chimneys and penetrations in compliance with Roof Assembly current Product Control
Notice of Acceptance.
S. All protrusions or drains shall be initially taped with a 6"piece of underlayment. The flashing tape shall be
pressed in place and formed around the protrusion to ensure a tight fit. A second layer of Polystick shall be
applied over the underlayment.
GENERAL fiaglx'l'A'l' oNs o
1. Fire classification is not part of this acceptance.
2. Polystick Dual Pro,Polystick Title Pro,Polystick TIT Plus,Polystick MTS and Polystick MTS Plus may be
used in asphaltic shingles,wood shakes and shingles,non-structural metal roofing,roof file systems and quarry
slate roof assemblies.
Polystick TU P may be used in all the previous assemblies listed except metal roofing.
Polystick X13 Xe may be used in all the previous assemblies listed except metal roofing and roof file systems.
Polystick TU Max may be used in non-structural metal roofing and roof file systems.
Elastoilex 86 G may be used in roof file systems only.
3. Deck requirements shall be in compliance with applicable building code.
4. Polystick IR-Xe,Polystick Dual Pao,Polystick Tile Pro,Polystick TU Max,Polystick TU P,Polystick TU
Plus,Polystick MTS and Polystick MTS Plus shall be applied to a smooth,clean and dry surface. The deck
shall be free of irregularities.
S. Polystick IR-Xe,Polystick Dual Pro,Polystick Tile Pro,Polystick TUMax,Polystick TU P,Polystick TU
Plus,Polystick MTS and Polystick MTS Plus shall not be adhered directly over a pre-existing roof membrane
as a recover system.
6. Polystick 1111-Xe,Polystick Dual Pro,Polystick Tile Pro,Polystick TU Max,Polystick TU P,Polystick TU
Plus,Polystick MTS and Polystick NTS Plus shall not be left exposed as a temporary roof for longer than the
amount of days listed in the table below after application. Polyglass reserves the right to revise or alter product
exposure times;not to exceed the preceeding maximum time limitations.
_2 rS e UI dares�2
M 7, � AT'a U z E m, I�Baan r a�F3a� T O�1us
u� ,��z�� � r T: z �i.�,rte �
_
06 G PRUG
W A—Mg aar-H 4 ego �gp`P Igo � gIso I n o igo _ �fi 1 - 3d
a�v'31an-30tam,TTA [ NWA 90 8N/A S SO � Wl f'2 N 4, j 4W/C:. 4
_ � 00 awl
* t ' NOA No.: 15-0410.04
Expiration Date: 09/13/21
MEMO Approval Date: 0ti/11/16
Page 5 of 8
7. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
Rule 61 G20-3 of the Florida Administrative Code.
S. In roof tile application,data for the attachment resistance of roof tiles shall be as set forth in the roof the
manufacturer's Notice of Acceptance.
Polystick Tile Pro,Polystick TU Max,Polystick TU Plus or Elastoflex S6 G may be used in both adhesive
set and mechanically fastened roof tile applications.
Polystick Dual Pro is limited to mechanically fastened roof tile applications.
Polystick MTS and Polystick MTS Plus are limited to mechanically fastened with the limitations outlined in
Section 9.
Polystick TU P may be used in mechanically fastened roof tile applications with the exception of mortar set tile
applications.
9. When loading roof tiles on roof the underlayment for(direct-to-deck)tile assemblies,the maximum roof slope
shall be as follows: (See Table Below)
Tile Pra flc Polys4ick MTS Elastofle`r Polystick TU fths,TAT P, PoRysidek Polystick
86 G MRe Piro,It uid Piro TU Max MTS Mus
Fla¢Tile prohibited 4:12 6:12 6:12 5:12
without battens
Profiled Tile Prohibited 4:12 6:12 6:12 4:12
without battens
The above slope limitations can be exceeded only by using battens in accordance with the Approved Tile System
Notice of Acceptance and applicable Florida Building Code requirements. When battens are required,they shall
be utilized during loading and installation of tiles.
10. Care should be taken during the loading procedure to keep foot traffic to a minimum and to avoid dropping of
tile directly on the underlayment.Refer to Polyglass'Tile loading detail below for loading procedure—two tiles
laid perpendicular to slope followed by a maximum four tile stack parallel to the slope,for a total of 6 tiles—for
all underlayments except Polystick MTS which shall be loaded onto battens.
i
NOA No.: 15-0410.04
Expiration Date: 09/13/21
Approval Date: 08/11/16
Page 6 of 9
1
11. Refer to prepared roofing system Product Control Notice of Acceptance for listed approval of this product with
specific prepared roofing products. Polystick IR-Xe,Polystick Dual Pro,Polystick'file Pro,Polystick TU
Max,Polystick TU P,Polystick TU Plus,Polystick MTS,Polystick MTS Plus or Elastoflex S6 G may be
used with any approved roof covering Notice of Acceptance listing Polystick IR-Xe,Polystick Dual Pro,
Polystick Tile Pro,Polystick TU Max,Polystick TU P,Polystick TU Plus,Polystick MTS,Polystick MTS
Plus or Elastollex S6 G as a component part of an assembly in the Notice of Acceptance.
If Polystick IR-Xe,Polystick Dual Pro,Polystick Tile Pro,Polystick TU Max,Polystick TU P,Polysuck
TU Pitts,Polystick MTS,Polystick MTS Plus or Elastoflex 86 G are not listed,a request may be made to the
Authority Having Jurisdiction(AHJ)or the Miami-Dade County Product Control Section for approval provided
that appropriate documentation is provided to detail compatibility of the products,wind uplift resistance,and fire
testing results.
POLYGLASS GENERAL A.PI'LICATION GuEDELINES FOR POLYSTICK MEMBRANES
PLEASE CHECK WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF SPECIFIC APPLICATIONS.
LocAL CODES MAY SUPERSEDE POLYGLASS REQUIREMENTS AND RECOMMENDATIONS.
1. Polyglass does accept the direct application of Polystick underlayment membranes to wood decks. Installers are
cautioned to refer to applicable local building codes prior to direct deck installation to ensure this is acceptable.
Please also refer to applicable Product Data Sheets of the corresponding products.
2. All rolls,with the exception of Polystick TU Plus should be back-nailed in selvage edge seam as per Polyglass
Back Nailing Guide. Nails shall be,11 gauge ring shank type,applied with a minimum 1 %"metal disk as
required in Miami-Dade County or simplex type nail as otherwise allowable in other regions,at a minimum rate
of 12"o.e. Polystick TU Plus should be back nailed in designated area marked"nail area,area para clavar"on
the face of membrane,with the above stated nails and/or disks.The head lap membrane is to cover the area being
back-nailed.(Please refer to applicable local building codes prior to installation.)
3. All seal lap seams(selvage laps)must be rolled with a hand roller to ensure full contact.
4. All fabric over fabric;and granule over granule end laps,shall have a 6"wide,uniform layer of Polyglass
Polyplus 55 Premium Modified Flashing Cement,Polyglass Polyplus 50 Premium MB Flashing Cement,
XtraFiex 50 Premium Modified Wet/Dry Cement,Polyglass PG500 MB Flashing Cement,applied in between
the application of the lap.The use of mastic between the laps does not apply to Polystick MTS.
5. A maximum of 6 tiles per stack are allowed when loading the on the underlayments.Refer to the Polyglass Tile
Loading Guidelines.See General Limitations#9 and#10.
6. Battens and/or Counter-battens,as required by the tile manufacturers NOA,must be used on all projects for
piteb/slopes of 71712"or greater. it is suggested that on pitch/slopes in excess of 6'/a"/12",precautions should be
taken,such as the use of battens to prevent tile sliding during the loading process.
7. Minimum cure time after membrane installation&before loading of roofing tiles is Forty-Eight(48)Hours.
S. Polystick membranes may not be used in any exposed application such as crickets,exposed valleys,or exposed
roof to wall details.
9. Repair of Polystick membranes is to be accomplished by applying Polyglass Polyplus 55 Premium Modified
Flashing Cement,Polyglass Polyplus 50 Premium MB Flashing Cement,XtraFlex 50 Premium Modified
Wet/Dry Cement,Polyglass PG500 MB Flashing Cement to the area in need of repair,followed by a patch of the
Polystick material of like kind should be set and hand rolled in place over the area needing such repair.Patching
membrane shall be a minimum of 6 inches in either direction. The repair should be installed in such a way so
that water will run parallel to or over the top of all laps of the patch.
W4 W MIN NOA No.: 15-0410.04
L3Expiration Date: 09/13/21
Approval Date: 08/11/16
Page 7 of 8
10. All self-adhered membranes must be rolled to ensure full contact with approved substrates. Polyglass requires a
minimum of 40 lbs for a weighted roller for the rolling of the field membrane. Hand rollers are acceptable for
rolling of patches or small areas of the roof. Brooming may be used where slope prohibits rolling.
11. All approved substrates should be dry,clean and properly prepared,before any application of Polystick
membranes commences. An approved substrate technical bulletin can be furnished upon request.It is
recommended to refer to applicable building codes prior to installation to verify acceptable substrates.
12. The Polyglass Miami Dade Notice of Acceptance(NOA)approval for Polystick membranes can be furnished
upon request by our Technical Services Department by calling 1(800)894-4563.
13. Questions in regards to the application of Polyglass products should be directed to our Technical Services
Department at 1 (800)894-4563.
14. Polyglass recommends that applicators follow good roofing practices and applicable procedures as outlined by
the National Roofing Contractors Association(NRCA).
PLEASE CHECK WITH LOCAL BUILDING CODES REGARDING LIMITATIONS OF SPECIFIC APPLICATIONS.
LOCAL CODES MAY SUPERSEDE POLYGLASS REQUIREMENTS AND RECOMMENDATIONS.
END OF THIS ACCEPTANCE
IB
F NOA No.: 154410.04
,'� Expiration Date: 09/13/21
Approval Date: 08/11/16
Page 8 of 8