HomeMy WebLinkAboutProject information Installation Manual
Specifications
SPECIFICATIONS
N-atua_ - _
- : YM1000lGas Input Mm 15;000 Min 15,000
0M000axBTU/h
(O eratin _Raa) Max. _160,
(Propane Input ' Mm 13;000 ;I Mm 13,000 �� Min 13,000
BTU h f
O eratin Ran e _ / --Max.. 180 00.0 �:` -� Max -199 000 j]
E�p g g )
bs Connection - 3/4" NPT_
u
IWate(Conneetions -- 3/4" NPT
Water.Pressure* psi(MPa} 15 150 (0 1= 1)
;Natural gas ":1NC Mm 4,0 (1 00) E
Inlet Pressure (kPa} ._ Max 10 5 (2.61) 3
Propane '' WC Min. 8.0,(1.99)-
;Inlet Pressure Max. 14:0.(3:48)
Weight lbs_. (kg) 58-(26.8):
-58 2) ;L(6 3)JiE 58 (6 59 (25.8) 59_f26.9)'
mch — H22:4xW-17.7xD10Z.. - -
ID , = -
Ty! - rnm I -_H'S70 x W=450 x:D_272
Ignition, ;�� _Electric Ignition
k_ _ - - T =
�- Supply VAC/Hz ! 120/60
L c Operation 3k 1N_/A _ 7_2 7/0:61 78-2-h
2/0 b5 f. 89 0/0 74
E =O
W Standby = VV/A 31/00331/003 4:2/004
— _ — -
1N/A 174/15 175/1.5
Protection,
-- * CategoryCategory: . Category
1Nater heater category, N/A - N/A N/A
IV IV IV
n
*40 psi or above is recommended for maximum flow.
**Water heater Category—water heaters of other than direct vent type,for outdoor installation, are divided into four
categories based on static pressure produced in the vent and flue loss.
Category I-a water heater that operates with a non-positive vent static pressure and with a vent gas temperature
that avoids excessive condensate production in the vent.
Category 11-a water heater that operates with a non-positive vent static pressure and with a vent gas temperature
that may cause excessive condensate production in the vent.
Category III-a water heater that operates with a positive vent static pressure and with a vent gas temperature that
avoids excessive condensate production in the vent.
Category IV-a water heater that operates with a positive vent static pressure and with a vent gas temperature that
may cause excessive condensate production in the vent.
NOTE:
• Check the rating plate to ensure that this product matches your specifications. -
• The manufacturer reserves the right to discontinue,or change at any time, specifications or designs
without notice and without incurring obligation. j
1
4 ..-