HomeMy WebLinkAboutTamko Shingles FL18355_R4
BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats & Facts Publications Contact Us BCIS Site Map Links Search
Product Approval
USER: Public User
Product Approval Menu > Product or Application Search > Application List > Application Detail
FL #FL18355-R4
Application Type Revision
Code Version 2017
Application Status Approved
Comments
Archived
Product Manufacturer TAMKO Building Products, Inc.
Address/Phone/Email PO Box 1404
Joplin, MO 64802
(417) 624-6644 Ext 2305
kerri_eden@tamko.com
Authorized Signature Kerri Eden
kerri_eden@tamko.com
Technical Representative Kerri Eden
Address/Phone/Email PO Box 1404
Joplin, MO 64802
(417) 624-6644 Ext 2305
kerri_eden@tamko.com
Quality Assurance Representative
Address/Phone/Email
Category Roofing
Subcategory Asphalt Shingles
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed the
Evaluation Report
Zachary R. Priest
Florida License PE-74021
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 10/18/2021
Validated By Locke Bowden P.E.
Validation Checklist - Hardcopy Received
Certificate of Independence FL18355_R4_COI_TBP15001.4 2017 FBC Eval Report Shingles final.pdf
Referenced Standard and Year (of Standard)Standard Year
ASTM D 3161 2016
ASTM D 3462 2010
ASTMD D 7158 2011
TAS 100 1995
Equivalence of Product Standards
Certified By Approved Testing Lab
FL18355_R4_Equiv_UL letter for standards for FBC 2017.pdf
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted 09/25/2017
Date Validated 09/27/2017
Date Pending FBC Approval 10/08/2017
Date Approved 12/12/2017
Summary of Products
FL #Model, Number or Name Description
18355.1 Glass-Seal, Elite Glass-Seal,
Heritage, Heritage Premium,
Heritage Woodgate, Heritage
Vintage, Hip and Ridge, and Vintage
Hip and Ridge Shingles
ASTM D 3462 asphalt shingles and hip and ridge shingles
Limits of Use
Approved for use in HVHZ: Yes
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Design Pressure: N/A
Other: See evaluation report for limits of use.
Installation Instructions
FL18355_R4_II_TBP15001.4 2017 FBC Eval Report Shingles
final.pdf
Verified By: Zachary R. Priest PE-74021
Created by Independent Third Party: Yes
Evaluation Reports
FL18355_R4_AE_TBP15001.4 2017 FBC Eval Report Shingles
final.pdf
Created by Independent Third Party: Yes
Back Next
Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487-1824
The State of Florida is an AA/EEO employer. Copyright 2007-2013 State of Florida. :: Privacy Statement :: Accessibility Statement :: Refund Statement
Under Florida law, email addresses are public records. If you do not want your e-mail address released in response to a public-records request, do not send electronic
mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.1395. *Pursuant to Section 455.275(1),
Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have one. The emails
provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal address, please
provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S., please click here .
Product Approval Accepts:
a CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 1 of 11 Page 1 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
Certificate of Authorization No. 29824
17520 Edinburgh Dr
Tampa, FL 33647
(813) 480-3421
EVALUATION REPORT FLORIDA BUILDING CODE, 6TH EDITION (2017)
Manufacturer: TAMKO BUILDING PRODUCTS Issued September 25, 2017
220 West 4th Street
Joplin, MO 64801
(417) 624-6644
Manufacturing Plants: Joplin, MO
Phillipsburg, KS
Frederick, MD
Dallas, TX
Tuscaloosa, AL
Quality Assurance: UL LLC (QUA9625)
SCOPE
Category: Roofing
Subcategory: Asphalt Shingles
Code Sections: 1504.1.1, 1507.2.5, 1507.2.7.1, 1523.6.5.1
Properties: Physical properties, Wind Resistance, Wind Driven Rain
REFERENCES
Entity Report No. Standard Year
PRI Construction Materials Technologies (TST5878) TAP-043-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-051-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-054-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-114-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-117-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-130-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-131-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-165-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-280-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-303-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-307-02-01 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-314-02-01 Rev 2 TAS 100 1995
PRI Construction Materials Technologies (TST5878) TAP-315-02-01 ASTM D 6381 2008(2013)e1
PRI Construction Materials Technologies (TST5878) TAP-317-02-01 TAS 100 1995
UL LLC (TST9628) 02NK9507 ASTM D 3161 2016
UL LLC (TST9628) 04NK24366 ASTM D 3462 2010A
UL LLC (TST9628) 05NK28006 ASTM D 6381
UL 2390
ASTM D 7158
2008(2013)e1
2011
UL LLC (TST9628) 06NK03898 ASTM D 3161
ASTM D 3462
2016
2010A
UL LLC (TST9628) 08CA59132 ASTM D 3161 2016
UL LLC (TST9628) 09NK07896 ASTM D 3161
ASTM D 3462
2016
2010A
UL LLC (TST9628) 10CA50498 ASTM D 3462 2010A
UL LLC (TST9628) 10CA64882 ASTM D 3161 2016
UL LLC (TST9628) 11NK14014 ASTM D 3161
ASTM D 3462
2016
2010A
UL LLC (TST9628) 12CA24551 ASTM D 3161 2016
UL LLC (TST9628) 4786110543 ASTM D 6381 2008(2013)e1
UL LLC (TST9628) 4787043752 ASTM D 3161 2016
UL LLC (TST9628) 4787148748 ASTM D 7158 2011
ASTM D 3161 2016
ASTM D 3462 2010A
CREEK Technical Services LLC (ANE11669) TBP15001.3 Calculations 2017
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 2 of 11 Page 2 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that a re not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
PRODUCT DESCRIPTION
Elite Glass-Seal®
(Frederick, Joplin &
Tuscaloosa)
12-1/4” x 36”, ASTM D 3161, Class F and ASTM D 7158, Class H self-sealing, 3-tab
asphalt shingle with fiberglass mat coated on both sides with asphalt and surfaced with
ceramic granules complying with ASTM D 3462.
Glass-Seal
(Frederick &
Tuscaloosa)
12-1/4” x 36”, ASTM D 3161, Class F and ASTM D 7158, Class H self-sealing, 3-tab
asphalt shingle with fiberglass mat coated on both sides with asphalt and s urfaced with
ceramic granules complying with ASTM D 3462.
Glass-Seal
(Joplin)
12-1/4” x 36”, ASTM D 7158, Class H self-sealing, 3-tab asphalt shingle with fiberglass
mat coated on both sides with asphalt and surfaced with ceramic granules complying
with ASTM D 3462. Shingles shall be used in the non-HVHZ only.
Heritage®
(Dallas, Frederick,
Joplin, Phillipsburg &
Tuscaloosa)
13-1/4” x 39-3/8”, ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass
reinforced, laminated architectural asphalt shingle surfaced with mineral granules
complying with ASTM D 3462.
Heritage® Premium
(Dallas, Frederick,
Phillipsburg &
Tuscaloosa)
13-1/4” x 39-3/8”, ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass
reinforced, laminated architectural asphalt shingle surfaced with mineral granules
complying with ASTM D 3462.
Heritage® Premium
(Frederick)
12” x 36”, ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass reinforced,
laminated architectural asphalt shingle surfaced with mineral granules complying with
ASTM D 3462.
Heritage® Vintage®
(Phillipsburg)
17-1/2” x 40”, ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass reinforced,
laminated architectural asphalt shingle surfaced with mineral granules complying with
ASTM D 3462.
Heritage® Woodgate
(Dallas & Frederick)
13-1/4” x 39-3/8”, ASTM D 3161, Class F and ASTM D 7158, Class H fiberglass
reinforced, laminated architectural asphalt shingle surfaced with mineral granules
complying with ASTM D 3462.
Heritage® Woodgate
(Frederick)
12” x 36-3/8”, ASTM D 3161, Class F fiberglass reinforced, laminated architectural
asphalt shingle surfaced with mineral granules complying with ASTM D 3462. Shingles
shall be used in the non-HVHZ only.
Hip and Ridge Shingles
(Frederick & Joplin)
12-1/4” x 12”, ASTM D 3161, Class F fiberglass reinforced, hip and ridge asphalt
shingle surfaced with mineral granules complying with ASTM D 3462.
Vintage® Hip and Ridge
(Phillipsburg)
12” x 12”, ASTM D 3161, Class F fiberglass reinforced, hip and ridge asphalt shingle
surfaced with mineral granules complying with ASTM D 3462.
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 3 of 11 Page 3 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that a re not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
INSTALLATION
Elite Glass-Seal®
(Frederick, Joplin &
Tuscaloosa)
&
Glass-Seal
(Frederick, Joplin (Non-
HVHZ) & Tuscaloosa)
Basic Wind Speed (Vult): Max. 194 mph
Basic Wind Speed (Vasd): Max. 150 mph
Deck (HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 19/32 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck (Non-HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min. 7/16 in. OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min. slope: 2:12 and in accordance with FBC requirements. Refer to
the manufacturer’s application instructions when installing
shingles at slopes greater than 21:12.
Installation (HVHZ): Installed with 5-1/8 inch exposure in accordance with RAS
115 and manufacturer’s published installation instructions.
Shingles shall be attached using “6 Nail Pattern” detailed
below.
Installation (Non-HVHZ): Installed with 5-1/8-inch exposure in accordance with FBC
requirements and manufacturer’s published installation
instructions. Shingles shall be attached using either “4 Nail
Pattern” or “6 Nail Pattern” detailed below.
Figure 1. Elite Glass-Seal & Glass-Seal
4 Nail Pattern (Non-HVHZ only)
Figure 2. Elite Glass-Seal & Glass-Seal
6 Nail Pattern
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 4 of 11 Page 4 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that a re not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
Heritage®
(Dallas, Frederick, Joplin,
Phillipsburg & Tuscaloosa)
&
Heritage® Premium
(Dallas, Frederick
Phillipsburg & Tuscaloosa)
&
Heritage® Woodgate
(Dallas & Frederick)
Basic Wind Speed (Vult): Max. 194 mph
Basic Wind Speed (Vasd): Max. 150 mph
Deck (HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 19/32 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck (Non-HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min. 7/16 in. OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min. slope: 2:12 and in accordance with FBC requirements. Refer to
the manufacturer’s application instructions when installing
shingles at slopes greater than 21:12.
Installation (HVHZ): Installed with 5-5/8 in. exposure in accordance with RAS
115 and manufacturer’s published installation instructions.
Shingles shall be attached using “6 Nail Pattern” detailed
below.
Installation (Non-HVHZ): Installed with 5-5/8 in. exposure in accordance with FBC
requirements and manufacturer’s published installation
instructions. Shingles shall be attached using either “4 Nail
Pattern” or “6 Nail Pattern” detailed below.
Figure 3. Heritage®, Heritage® Premium, and Heritage® Woodgate (Dallas)
4 Nail Pattern (non-HVHZ only)
Figure 4. Heritage® & Heritage® Premium
6 Nail Pattern
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 5 of 11 Page 5 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that a re not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
Figure 5. Heritage® Woodgate
6 Nail Pattern
Figure 6. Heritage®, Heritage® Premium, & Heritage® Woodgate
Alternate 6 Nail Pattern
Figure 7. Heritage® (Tuscaloosa)
Expanded Nail Zone
Nail patterns from Figures 3, 4, and 6 may be placed in the nail zone as described above
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 6 of 11 Page 6 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that a re not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
Heritage® Premium
(Frederick)
Basic Wind Speed (Vult): Max. 194 mph
Basic Wind Speed (Vasd): Max. 150 mph
Deck (HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 19/32 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck (Non-HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min. 7/16 in. OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min. slope: 2:12 and in accordance with FBC requirements. Refer to
the manufacturer’s application instructions when installing
shingles at slopes greater than 21:12. .
Installation (HVHZ): Installed with 5 in. exposure in accordance with RAS 115
and manufacturer’s published installation instructions.
Shingles shall be attached using “6 Nail Pattern” detailed
below.
Installation (Non-HVHZ): Installed with 5 in. exposure in accordance with FBC
requirements and manufacturer’s published installation
instructions. Shingles shall be attached using either “4 Nail
Pattern” or “6 Nail Pattern” detailed below.
Figure 8. Heritage® Premium (Frederick)
4 Nail Pattern (non-HVHZ only)
Figure 9. Heritage® Premium (Frederick)
6 Nail Pattern
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 7 of 11 Page 7 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that a re not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
Heritage® Woodgate
(Frederick)
Basic Wind Speed (Vult): Max. 194 mph
Basic Wind Speed (Vasd): Max. 150 mph
Deck (Non-HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min. 7/16 in. OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min. slope: 2:12 and in accordance with FBC requirements. Refer to
the manufacturer’s application instructions when installing
shingles at slopes greater than 21:12.
Installation (Non-HVHZ): Installed with 5 in. exposure in accordance with FBC
requirements and manufacturer’s published installation
instructions. Shingles shall be attached using either “4 Nail
Pattern” or “6 Nail Pattern” detailed below.
Figure 10. Heritage® Woodgate (Frederick)
4 Nail Pattern (non-HVHZ only)
Figure 11. Heritage® Woodgate (Frederick)
6 Nail Pattern
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 8 of 11 Page 8 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that a re not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
Heritage® Vintage®
(Phillipsburg)
Basic Wind Speed (Vult): Max. 194 mph
Basic Wind Speed (Vasd): Max. 150 mph
Deck (HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 19/32 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck (Non-HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min. 7/16 in. OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min. slope: 2:12 and in accordance with FBC requirements. Refer to
the manufacturer’s application instructions when installing
shingles at slopes greater than 21:12.
Installation (HVHZ): Installed with 5 in. exposure in accordance with RAS 115
and manufacturer’s published installation instructions.
Shingles shall be attached using “6 Nail Pattern” detailed
below.
Installation (Non-HVHZ): Installed with 5 in. exposure in accordance with FBC
requirements and manufacturer’s published installation
instructions. Shingles shall be attached using either “5 Nail
Pattern” or “6 Nail Pattern” detailed below.
Figure 12. Heritage® Vintage®
5 Nail Pattern (non-HVHZ only)
Figure 13. Heritage® Vintage®
6 Nail Pattern
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 9 of 11 Page 9 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that a re not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
Hip & Ridge
(Frederick & Joplin)
Basic Wind Speed (Vult): Max. 194 mph
Basic Wind Speed (Vasd): Max. 150 mph
Deck (HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 19/32 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck (Non-HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min. 7/16 in. OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min. slope: 2:12 and in accordance with FBC requirements.
Installation: Installed with 5-1/8 inch exposure in accordance with the
FBC and manufacturer’s published installation instructions.
The direction of the exposed end shall be away from the
prevailing wind.
Figure 14. Hip & Ridge (Frederick & Joplin)
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 10 of 11 Page 10 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20 -3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that a re not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
Vintage® Hip & Ridge
(Phillipsburg)
Basic Wind Speed (Vult): Max. 194 mph
Basic Wind Speed (Vasd): Max. 150 mph
Deck (HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 19/32 in. plywood or wood plank for
new construction; Min. 15/32 in. plywood existing
construction.
Deck (Non-HVHZ):
In accordance with FBC requirements;
Solidly sheathed min. 15/32 in. plywood or wood plank for
new construction; Min. 7/16 in. OSB existing construction.
Underlayment: In accordance with FBC requirements.
Min. slope: 2:12 and in accordance with FBC requirements.
Installation: Installed with 5 inch exposure in accordance with the FBC
and manufacturer’s published installation instructions. The
direction of the exposed end shall be away from the
prevailing wind.
Figure 15. Vintage® Hip & Ridge (Phillipsburg)
A CREEK
Technical Services, LLC
TBP15001.4 FL18355-R4 Page 11 of 11 Page 11 of 11
This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK
Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid.
This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not
specifically addressed herein.
TAMKO BUILDING PRODUCTS
Asphalt Shingles
LIMITATIONS
1)Fire Classification is not within the scope of this evaluation.
2)The roof deck and the roof deck attachment shall be designed by others to meet the minimum design loads
established for components and cladding and in accordance with FBC requirements.
3)The mean roof height shall be restricted to a maximum 33 ft in the HVHZ.
4)Classification to ASTM D 7158 applies to exposure B & C with a building mean roof height of 60-ft or less.
5)Deck substrates shall be clean, dry, and free from any irregularities and debris. All fasteners in the deck
shall be checked for protrusion and corrected prior to underlayment application.
6)Shingles shall be installed starting at the eave in horizontal layers such that the laps shed water from the
deck.
7)Installation of the evaluated products shall comply with this report, the FBC, an d the manufacturer’s
published application instructions. Where discrepancies exist between these sources, the more restrictive
and code compliant detail shall prevail.
8)All products listed in this report shall be manufactured under a quality assurance program in compliance with
Rule 61G20-3.
COMPLIANCE STATEMENT
The products evaluated herein by Zachary R. Priest, P.E. have demonstrated compliance with the Florida Building
Code, 6th Edition (2017) as evidenced in the referenced documents submitted by the named manufacturer.
Zachary R. Priest, P.E.
Florida Registration No. 74021
Organization No. ANE11669
CERTIFICATION OF INDEPENDENCE
CREEK Technical Services, LLC does not have, nor will it acquire, a financial interest in any company manufacturing or distributing
products under this evaluation.
CREEK Technical Services, LLC is not owned, operated, or controlled by any company manufacturing or distributing products under
this evaluation.
Zachary R. Priest, P.E. does not have, nor will acquire, a financial interest in any company manufacturing or distributing products
under this evaluation.
Zachary R. Priest, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
END OF REPORT