HomeMy WebLinkAboutSITE SPECIFIC ENGINEERING BRIARDesign Information
Risk Category 2
Windspeed 160 mph
Exposure C
Int. Press. Coef., GC,,(+/-) 0.18
a 4.00 feet
Select the appropriate fastener size and spacing using the pre-engineered attachment schedule for the Florida Approved Product(s) or NOA used on this job. The
contractor is responsible to ensure the use of the proper material, reinforcement, components, etc. to meet the indicated pressure per the product approval
engineering document. The contractor is responsible to verify the component is in the appropriate zone using the "a" dimension shown above and diagrams
shown below. The building pressures are calculated using the Allowable Stress Design. Contact Seaside Engineers immediately if the substrate at the attachment
locations appears to have deterioration, abnormalities, damage, or other conditions resulting in questionable integrity.
Component & Cladding Wind Loads
Prepared for DVT Hurricane Shutters Inc
Calculations by Seaside Engineers
Project:
Briar Residence
Certificate of Authorization No. 32048
Location:
6024 Indrio Road APT 5
4265 60th Court
sealed and the siemature
Fort Pierce, FL 34951
Vero Beach, Florida 32967
Project ID:
electronic copes.
(722) 202-8008 info@seasideengineers.com
Date:
4/10/2020
www.seasideengineers.com
Design Information
Risk Category 2
Windspeed 160 mph
Exposure C
Int. Press. Coef., GC,,(+/-) 0.18
a 4.00 feet
Select the appropriate fastener size and spacing using the pre-engineered attachment schedule for the Florida Approved Product(s) or NOA used on this job. The
contractor is responsible to ensure the use of the proper material, reinforcement, components, etc. to meet the indicated pressure per the product approval
engineering document. The contractor is responsible to verify the component is in the appropriate zone using the "a" dimension shown above and diagrams
shown below. The building pressures are calculated using the Allowable Stress Design. Contact Seaside Engineers immediately if the substrate at the attachment
locations appears to have deterioration, abnormalities, damage, or other conditions resulting in questionable integrity.
ROOF:
WALL:
This item has been eiec-
tronical',v ssgried and
PRD.K AG
Florida
: �; ••�4E S •' ;,
�•
PE usin„n, a D-.eitai S:Jaa-
tune i ranted copies of
No. 72228 -
this document are not
--d-1 signed and
* giA TE OF (*�
•7q}, • [ti =
•%,
sealed and the siemature
;:c< ,� R tpa •?��
must be s•enfi*d on rut•
Product
electronic copes.
Area
Approval #
Building Design
Product Design
ID
Opening Description
(sqft)
Zone
or NOA
Manufacturer
Model
Pressure (PSF)
Pressure (PSF)
1
Shutter
92.8
5
FL389.2
ASSA
Bertha HV Accordian
26.3 -32.1
135.0 -110.0
ROOF:
WALL:
This item has been eiec-
tronical',v ssgried and
PRD.K AG
sealed b.• Eduard Rosks
: �; ••�4E S •' ;,
�•
PE usin„n, a D-.eitai S:Jaa-
tune i ranted copies of
No. 72228 -
this document are not
--d-1 signed and
* giA TE OF (*�
•7q}, • [ti =
•%,
sealed and the siemature
;:c< ,� R tpa •?��
must be s•enfi*d on rut•
electronic copes.
E
N. kD I K
�i XN'L
O. /02O.6
STATE
Edward I
April 10, 2020