HomeMy WebLinkAboutSystem SpecificationsRECEIVED
MAR 17 2020
Permitting Department
St. Lucie County .
LIFE SAVER POOL FENCE SYSTEM SPECIFICATIONS
General Description:
Pool fence designed specifically to provide a Barrier around residential swimmingpools
for toddlers and young children. Life Saver Pool Fence Systems ® does not have any
gaps, openings, indentations, protrusions, or structural components that could allow a .
young child to crawl under, squeeze through, or climb over the barrier. Our exclusive
Perma Locking System will not allow the harrier to be removed without the aid of tools.
Life Saver Pool fence is manufactured and installed in compliance with the Florida
Reside" 4501.17 and the Florida Statute.
System:
Tension based system utilizing a series of 15 foot sections of fence with inserts for
mounting in non -conducting polypropylene sleeves core drilled 4 inches deep into a
concrete deck or other substantial surface, connected in series at the top with our
exclusive 2 In inch Perma Locking System.
Construction:
Mesh: Polyester mesh fabric with a mildew resistant polyvinyl coating to provide for
years of use in direct sunlight.
Continuous basket weave with a tensile strength rating of 270 lbs. Per inch
making it impossible to rip under normal use.
Color selection is blacks, white, green or brown. Available in 48 or 60 in heights.
Bordered on all four sides by a reinforced vinyl material with a rating of 387
lbs. To prevent sagging and provide the necessary.tension to insure the fence's
integrity for its intended purpose both at the top and bottom.
The mesh is pre -mounted on atumintmt support poles and secured by alun]immm.
cove molding strips.
Poles: Poles are constructed of marine grade aluminum, black, white, green, tan and
brown powder coated or silver finish
Pole spacing is at 36 inches.
'Stainless steel screws (14) are utilized for securely attaching the aluminum cove
molding to the poles and mesh.
Surface of the poles are finished for handling and to prevent injuries from
physical contact.
The poles are capped to provide a neat finished appearance.
Revised I1/10/15 '
Life Saver Pool Fence Systems, Inc. '
Removable Pool Safety Mesh Barrier Fencing Technical Specifications
Life Saver Pool Fence Systems, Ine. has manufactured removable pool safety fencing
for over 13 years and has continuously evolved their methods and materials, often -time
leading industry wide changes. A Manufacturer's Limited Lifetime Warranty guarantees
every system for as long as they own it. Life Saver Pool Fence meets and exceeds all
code requirements throughout Florida.'Below you will find technical specifications on the
components used in assembling the Life Saver Pool Fence. -
Textilene Mesh
Textilene mesh has been used as the highest quality material to the pool fence industry
for over 15 years. Laboratory testing shows its strengths to surpass all code specifications
and applicable ASTM standards.
Item Number. • T70 DFS
Product Description:
Fabric using .025" dia. vinyl -coated 1000 den. polyester core yams in the warp
and fill.
Construction, endlinch
D3775-96
13.0 + .5
Weight, ortydZ
D3776-96
--
-Tensile Strength (grab), Ibf
D5034-95
221A
Tensile Strength (strip), Ibf
D5035-95
194.9
Tear Strength, (frapezodial), Ibf
D1117-97
65.4
Ball Burst, Ibf
D3787-89
Bursting Strength, psi
D3786-89
Elongation, %
D5035-95
24.3
Abrasion Resistance
D3884-92
(CS10/500 cycles/ with no added weight)
Flammability Rating
Weatherability, 1200 hours
G53-96
Mildew Resistance
G21-96'
The above results are a representative of real data from single test samples.
Presently no specification is incorporated.
11.0 ± .5
19 9
213.3
153.8
54.0
335
433
21.6
No'exposure of core yam
CS-191-53 & CA 117E
No discoloration
No growth
Warp refers to the horizontal threading while fill refers to the vertical threading. As
shown, all testing confirms Textilene mesh meets and, on all strength tests, amply
exceeds the set code requirements.
Reinforced 1" Aluminum Pole
Life Saver Pool Fence uses Reinforced 6063T6 1" Aluminum Poles spaced no more than
36" apart. Mesh is secured.to the pole via an aluminum cove -molding using roundhead
screws spaced no greater than 67.
The temper rating of T6 scores the highest tensile strength (30 ksi) within the 6063 alloy
classification.
On July le, 2003,, Life Saver Pool Fence Systems, Inc. contracted Nutting Engineers of
Florida, Inc., an ASTM standards testing lab established in 1967, to test the pole strength
as per the Florida Residential Code 4501.17
At the time of testing, a lateral force was applied to a single pole at a measurement of 36 '
from the surface of the deck. In the test, the resistance to lateral pressure was found to
exceed 701bs.'of pressure before failur6 on any single pole in a free standing installation,
thus exceeding the 521bs. of horizontal force prescribed by the Florida Building Code. .