HomeMy WebLinkAboutCanoe Creek NOADEPARTMENT OF REGULATORY AND ECONO
BOARD AND CODE ADMINISTRATION DIVISION
NOTICE OF ACCEPTANCE I
Polyglass USA, Inc.
150 Lyon Drive
Fernley, NV 89408
SCOPE:
RESOURCES (RER)
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
www.miamidadc.gov/economy
This NOA is being issued under the applicabl rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed d accepted by Miami -Dade County RER - Product Control Section to be
used in Miami Dade County and other areas v rhere allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expirati
(In Miami Dade County) and/or the AHJ (in
product or material tested for quality assuran(
manner, the manufacturer will incur the expel
suspend the use of such product or material m
if it is determined by Miami -Dade County Pr+
requirements of the applicable building code.
This product is approved as described herein,
including the High Velocity Hurricane Zone 4
DESCRIPTION: Polyglass Self -Adhered
LABELING: Each unit shall bear a pen
statement: "Miami -Dade County Product
RENEWAL of this NOA shall be consid,
in the applicable building code negatively
TERMINATION of this NOA will occur
t date stated below. The Miami -Dade County Product Control Section
:as other than Miami Dade County) reserve the right to have this
purposes. if this product or material fails to perform in the accepted
of such testing and the AHJ may immediately revoke, modify, or
hin their jurisdiction. RER reserves the right to revoke this acceptance,
uct Control Section that this product or material fails to meet the
ad has been designed to comply with the Florida Building Code
the Florida Building Code.
System over Wood Decks
label with the manufacturer's name or logo, city, state and following
1 Approved", unless otherwise noted herein.
after a renewal application has been filed and there has been no change
acing the performance of this product.
- the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section
of this NOA shall be cause for termination an I removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertisig literature. If any portion of the NOA is displayed, then it shall be done
in its entirety.
INSPECTION: A copy of this entire NOA +all be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job sit at the request of the Building Official.
This NOA renews NOA# 13-1217.01 and c4ists of pages 1 through 34.
The submitted documentation was reviewed by Alex Tigera.
NOA. No.: 17-1004.09
Expiration Date: 10/11/22
Approval Date: 10/12/17
Page 1 of 34
ROOFING ASSEMBLY APPROVAL
Category:
Roofing
Sub -Category:
Modified B
Materials
SBS/APP/T
Deck Type:
Wood
Maximum Design Pressure
-112.5 psf
TRADE NAMES OF PRODUCTS MANI
JFACTURED OR LABELED BY APPLICANT:
TABLE 1
Test
Product
Product
Dimensions
Specification
Description
Elastobase
65'2"x3'3-3/8"
ASTM D 6163,
SBS modified asphalt coated fiberglass reinforced
Type l
base sheet.
XtraFlex SBS Glass
65' 8" x 3' 3-3/8"
ASTM D 6163,
SBS modified asphalt coated fiberglass reinforced
Base
Type I
base sheet.
Polyglass G2 Base
108' x 36"
ASTM D 4601
Asphalt -coated fiberglass reinforced base sheet
Type II
Polyanchor
250' x 48"
ASTM D 4601
A polymer woven, high performance, synthetic base
Type II
sheet.
Elastobase P
65' 8" x 3' 3-3/8"
ASTM D 6164,
SBS modified asphalt coated polyester reinforced base
Elastoflex SA V FR
66' 8" x 3' 3-3/8"
Type I
ASTM D 6163,
sheet.
Self -adhered, fire -rated, fiberglass reinforced, SBS
(1.5 -mm)
Type I
modified bitumen membrane with a self -adhering back
face and a smooth top surface.
Elastoflex SA V
66' 8" x 3' 3-3/8"
ASTM D 6163,
Self -adhered, fire -rated, fiberglass reinforced, SBS
PLUS FR
Type I
modified bitumen membrane with a self -adhering back
face and a smooth top surface.
Elastoflex SA V (1.5-
66' 8" x 3' 3_3/8,,
ASTM D 6163,
Self -adhered, fiberglass reinforced, SBS modified
mm)
Type I
bitumen membrane with a self -adhering back face and
a smooth top surface.
Elastoflex SA V
66' 8" x 3' V/8"
ASTM D 6163,
Self -adhered, fiberglass reinforced, SBS modified
PLUS
Type I
bitumen membrane with a self -adhering back face and
a smooth top surface.
XtraFlex SBS Base
66' 8" x 3' 33/8"
ASTM D 6163,
Self -adhered, fiberglass reinforced, SBS modified
SA
Type I
bitumen membrane with a self -adhering back face and
a smooth top surface.
Elastoflex SA P FR
32' 10" x 3' 3-3/8"
ASTM D 6164,
Self -adhered, fire -rated, polyester reinforced, SBS
Type I
modified bitumen membrane with a self -adhering back
face and a granule top surface.
XtraFlex SBS G SA
32' 10" x 3' 3-3/8"
ASTM D 6164,
Self -adhered, fire -rated, polyester reinforced, SBS
Type I
modified bitumen membrane with a self -adhering back
face and a granule top surface.
NOA No.: 17-1004.49
Expiration Date: 10/11/22
Approval Date: 10/12/17
Page 2 of 34
Elastoflex SA P
Polyflex
XtraFlex APP S
Polybond
Polyflex G
Polyflex SA P
Polyflex SA P FR
32' 10" x 3' 3-3/8"
32' 10" x 3' 3-3I8"
32' 10" x 3' 3-3/8"
32' 10"x3'3-3/8"
32' 10" x 3' 3-3/8"
32' 10" x 3' 33/8"
32' 10" x 3' 3-3/8"
XtraFlex APP G SA 32' 10" x 3' 3 3/8"
Polyfresko G SBS SA 32'10"x3'33/8"
Polyfresko G SBS SA 32' 10" x 3' 3-3/8"
FR
Polyfresko G APP SA 32' 10" x 3' 3-3/8)'
Polyfresko G APP SA 32' 10" x 3' 3318"
FR
PolyKool 32' 10" x 3' 3%"
XtraFlex Koo] APP S 32' ]0" x 3' 33/811
SA
Polyglass APP Base 65' 8"x 3' 3_3/891
ASTM D 6164,
Self -adhered, fiberglass reinforced, SBS modified
Type 1
bitumen membrane with a self -adhering back face and
a granule top surface.
ASTM D 6222
Torch applied, polyester reinforced, APP modified
Type I
bitumen membrane with a burn off polyethylene back
face and a smooth or sanded top surface.
ASTM D 6222
Torch applied, polyester reinforced, APP modified
Type I
bitumen membrane with a burn off polyethylene back
face and a smooth or sanded top surface.
ASTM D 6222
Torch applied, polyester reinforced, APP modified
bitumen membrane with a burn off polyethylene back
face and a smooth or sanded top surface.
ASTM D 6222
Torch applied, polyester reinforced, APP modified
bitumen membrane with a burn off polyethylene back
face and a granule top surface.
ASTM D 6222,
Self -adhered, polyester reinforced, APP modified
Type I
bitumen membrane with a self -adhering back face and
a granule top surface.
ASTM D 6222,
Self -adhered, fire -rated, polyester reinforced, APP
Type I
modified bitumen membrane with a self -adhering back
face and a granule top surface.
ASTM D 6222,
Self -adhered, fire -rated, polyester reinforced, APP
Type I
modified bitumen membrane with a self -adhering back
face and a granule top surface.
ASTM D 6164,
Self -adhered, fiberglass reinforced, SBS modified
Type I
bitumen membrane with a self -adhering back face and
a granule top surface.
ASTM D 6164,
Self -adhered, fire -rated, fiberglass reinforced, SBS
Type I
modified bitumen membrane with a self -adhering back
face and a granule top surface.
ASTM D 6222, Self -adhered, polyester reinforced, APP modified
Type I bitumen membrane with a self -adhering; back face and
a granule top surface.
ASTM D 6222, Self -adhered, fire -rated, polyester reinforced, APP
Type I modified bitumen membrane with a self -adhering back
face and a granule top surface
ASTM D6222
Self -adhered, polyester reinforced, APP modified
Type I
bitumen membrane with a self -adhering back face and
a white film laminate on the top surface.
ASTM D6222
Self -adhered, polyester reinforced, APP modified
Type I
bitumen membrane with a self -adhering back face and
a white film laminate on the top surface.
ASTM D 6509
APP modified asphalt coated fiberglass reinforced
Type I
base sheet.
NOA No.: 17-1004.09
Expiration Date: 10/11/22
Approval Date: 10/12/17
Page 3 of 34
Membrane Type:
Deck Type 1:
Deck Description:
System Type E(7):
SBS/APP
Wood, Non -Insulated
"/32" or greater plyw+ or wood plank, fastened to supports spaced 24" o.c. and to blocking
members spaced 48" c. with 910x3" wood screws spaced b" o.c.
Base sheet is mechanically attached to roof deck. Membranes subsequently adhered to
insulation.
All General and System Limitations apply. Roof accessories not listed in Table 1 of this NOA are not approved
and shall not be installed unless said accessories demonstrate compliance with prescriptive Florida Building
Code requirements and are field fabricated utilizing the approved membranes listed in Table 1.
Base Sheet:
Fastening:
Ply Sheet:
Membrane:
Surfacing:
Maximum Design
Pressure:
One ply of Elastobasel XtraFlex SBS Glass Base or Elastobase P fastened to the deck as
described below:
Attach base sheet usin12 ga. ring shank nails and tin caps spaced 4" o.c. in a 4" lap and 4"
o.c. in four equally sprced staggered rows in the center of the sheet.
One or more plies of F lastoflex SA V (1.5 -mm), Elastoflex SA V PLUS, XtraFlex SBS Base
SA, Elastoflex SAV HR (1.5 -mm) or Elastoflex SA V PLUS FR, self -adhered.
One ply of Poiyfresko G SBS SA, Polyfresko G SBS SA FR, Elastoflex SA P, Elastoflex SA P
FR or XtraFlex SBS C SA, self -adhered.
Or
One ply of Polyflex G torch -applied
(Optional) Install one �f the approved surfacing products listed in Table 4 to obtain desired
coating or required fir classification.
-112.5 psf; With
(See General lin
-97.5 psf; With I
limitation #7.)
flex SA V PLUS, XtraFlex SBS Base SA or Elastoflex SA V PLUS FR
#7.)
ex SA V(1.5 -mm) or Elastoflex SA V FR(1.5-mm) (See General
NOA No.: 17-1004.09
Expiration Date: 10/11/22
Approval Date: 10112/17
Page 32 of 34