HomeMy WebLinkAboutNotice of AcceptanceDEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER)
BOARD AND CODE ADMINISTRATION DIVISION
NOTICE OF ACCEPTANCE
GAF
1 Campus Drive
Parsippany, NJ 07054
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street, Room 208
Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
www.mia midnde.eov/economy
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
(In Miami Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this product
or material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the
manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use
of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance, if it is
determined by Miami -Dade County Product Control Section that this product or material fails to meet the requirements
of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: GAF Timberline® Cool Series Shingles
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for
sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it'shall be done
in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA revises and renews NOA No. 14-1022.22 and consists of pages 1 through 5.
The submitted documentation was reviewed by Freddy Selnino M
MIAMt M ImpCOUNTY
NOA No.: 18-0123.08
. � I Expiration Date: 04/22/23
Approval Date: 03/08/18
Page 1 of 5
ROOFING ASSEMBLY APPROVAL
Category: Roofing
Sub -Category: Asphalt Shingles
Materials: Laminate
Deck Type: Wood
SCOPE
This approves GAF Timberline® Cool Series Shingles as manufactured by GAF described in Section 2 of this Notice
of Acceptance.
PRODUCT DESCRIPTION
Product
GAF Timberline® Cool Series
MANUFACTURING LOCATION
1. Fontana, CA.
EVIDENCE SUBMITTED
Test Agency
Underwriters Laboratories, Inc.
PRI Construction Materials
Technologies.
LIMITATIONS
Dimensions Test Product Description
Specifications
13'/4"x 393/8" TAS 110
Fiberglass reinforced heavy weight asphalt roof
shingle, with a laminate profile
Test Identifier
Test Name/Report
Date
06NK17047
ASTM D 3462
01/04/07
09CA27281
ASTM D 3161 / TAS 107
08/27/09
4788186042
ASTM D 3462
12/20/17
GAF-147-02-01
TAS-100
08/24/06
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
fire ratings of this product.
2. Shall not be installed on roof mean heights in excess of 33 ft.
3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code and
Rule 61G20-3 of the Florida Administrative Code.
INSTALLATION
1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115.
2. Flashing shall be in accordance with Roofing Application Standard RAS 115
3. The manufacturer shall provide clearly written application instructions.
4. Exposure and course layout shall be in compliance with Detail 'A', attached.
5. Nailing shall be in compliance with Detail '13% attached.
NOA No.: 18-0123.08
Expiration Date: 04/22/23
Approval Date: 03/08/18
Page 2 of 5
LABELING
Shingles shall bear the imprint or identifiable marking of the manufacturer's name or logo, city and state of
manufacturing facility, and following statement: "Miami -Dade County Product Control Approved" or the Miami -Dade
County Product Control Seal as shown below.
MIAMI•DADE COUNTY
BUILDING PERMIT REQUIREMENTS:
Application for building permit shall be accompanied by copies of the following:
1. This Notice of Acceptance.
2. Any other documents required by Building Official or Applicable building code in order to properly evaluate the
installation of this material.
NOA No.: 18-0123.08
Expiration Date: 04/22/23
Approval Date: 03/08/18
Page 3 of 5
DETAIL A
COURSE LAYOUT
Exposure
NOA No.: 18-0123.08
Expiration Date: 04/22/23
Approval Date: 03/08/18
Page 4 of 5
1�
DETAIL B
OVERALL DIMENSIONS AND NAILING PATTERN
cn ornn
a
JIIII
L
1 /2"
Front Side (Maximum Slope 21:12)
Tab Sealant
1"
21,
i�
Back Side
GAF TIMBERLINE® COOL SERIES SHINGLE
END OF THIS ACCEPTANCE
Release
Tape
PA
URN
NOA No.: 18-0123.08
Expiration Date: 04/22/23
Approval Date: 03/08/18
Page 5 of 5