HomeMy WebLinkAboutengineering (2)NEMO I etc.
Certificate of Authorization #32455
353 Christian Street, Unit #13
Oxford, CT 06478
(203) 262-9245
ENGINEER EVALUATE TEST CONSULT CERTIFY
REPORTEVALUATION
CertainTeed Corporation Evaluation Report 3520.03.04-R24
20 Moores Road FL2533-R23
Malvern, PA 19355 Date of Issuance: 09/19/2005
(610) 651-5847 Revision 24: 06/20/2019
SCOPE:
This Evaluation Report is issued under Rule 611320-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code. The product described herein has been evaluated for
compliance with the 61h Edition (2017) Florida Building Code sections noted herein.
DESCRIPTION: FlintlasticO Modified Bitumen Roof Systems
LABELING: Labeling shall be in accordance with the requirements of the Accredited Quality Assurance Agency noted
herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced
Quality Assurance documentation changes, or provisions of the Code that relate to the product change. Acceptance of
this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. of any changes to the
product(s), the Quality Assurance or the production facility location(s). NEMO j etc. requires a complete review of this
Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "NEMO I etc. Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 6, plus a 67-page Appendix.
Prepared by:
Robert J.M. Nieminen, P.E.
Florida Registration No. 59166, Florida DCAANE1983
The facsimile seal appearing was authorized by Robert
?." ry'4'- '
Nieminen, P.E. on 06/20/2019. This does not serve as an
ti, 1 �:o'''``
electronicaAy signed document.
CERTIFICATION OF INDEPENDENCE:
1. NEMO ETC, LLC does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. NEMO ETC, LLC is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither NEMO I etc. nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any project
on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained specifically
for that purpose.
U(4
• I etc.
ROOFING SYSTEMS EVALUATION:
SCOPE:1.
Product Category: Roofing
Sub -Category: Modified Bitumen Roof Systems
Compliance Statement: Flintlastic® Modified Bitumen Roof Systems, as produced by CertainTeed Corporation,
have demonstrated compliance with the following sections of the 6th Edition (2017) Florida Building Code through
testing in accordance with the following Standards. Compliance is subject to the Installation Requirements and
Limitations / Conditions of Use set forth herein.
Section
Propert
Standard
Year
1504.3.1
Wind
FM 4474
2011
1504.7
Impact
FM 4470
2012
1507.11.2
Physical properties
ASTM D6162
2008
1507.11.2
Physical Properties
ASTM 06163
2008
1507.11.2
Physical Properties
ASTM D6164
2011
1507.11.2
Physical Properties
ASTM D6222
2011
1507.11.2
Physical Properties
ASTM D6509
2009
Entit
Examination
Reference
Date
ERD (TST6049)
FM 4470
3504,06.01-1
06/05/2001
ERD (TST6049)
FM 4470
3513.08.02
08/15/2002
ERD (TST6049)
FM 4470
03515.07.03
07/22/2003
ERD (TST6049)
FM 4470
3519.12.03
12/22/2003
ERD (TST6049)
FM 4470/4474
3522.07.04
07/28/2004
ERD (TST6049)
FM 4470/4474
02943.02.05-11
02/10/2005
ERD (TST6049)
FM 4470/4474
3533.01.06
01/06/2006
ERD (TST6049)
FM 4470/4474
4674.11.01-1
03/21/2006
ERD (TST6049)
Physical Properties
3535.10.06
10/31/2006
ERD (TST6049)
FM 4470/4474
3521.07.04-R1
10/76/2007
ERD (TST6049)
FM 4470/4474
02764.09.05-R1
12/10/2007
ERD (TST6049)
FM 4470/4474
02762.03.05-R1
12/10/2007
ERD (TST6049)
Physical Properties
C7290.01.08
01/16/2008
ERD (TST6049)
Physical Properties
C10080.09.08
09/04/2008
ERD (TST6049)
FM 4470/4474
C8370.08.08-111
10/05/2009
ERD (TST6049)
FM 4470/4474
P6860.06,07-111
09/10/2009
ERD (TST6049)
FM 4470/4474
C30310.12.09
12/17/2009
ERD (TST6049)
FM 4470/4474
C30560.03.10
03/18/2010
ERD (TST6049)
FM 4470/4474
C31420.08.10
09/21/2010
ERD(TST6049)
FM 4470/4474
C33980.12.10
12/22/2010
ERD (TST6049)
FM 4470/4474
C33830.02.11
02/09/2011
ERD(TST6049)
TAS 117(8),Rupture
C35500.02.11
02/09/2011
ERD (TST6049)
FM 4470/4474
C37820.07.12
07/24/2012
ERD (TST6049)
FM 4470/4474
C37830.07.12
07/26/2012
ERD (TST6049)
Physical Properties
C42110.08.12
08/13/2012
ERD (TST6049)
FM 4470/4474
C39670.08.12
08/20/2012
ERD (TST6049)
FM 4470/4474
C42280.08.12
O8/20/2012
ERD (TST6049)
TAS 117(A)
A35880.04.12-R1
10/26/2012
ERD (TST6049)
FM 4470/4474
C44580.07.13
07/25/2013
ERD (TST6049)
FM 4470/4474
C46090.11.13-A
11/20/2013
ERD (TST6049)
FM 4470/4474
C45620.03.14
03/27/2014
ERD (TST6049)
FM 4470/4474
C46760.06.14
06/19/2014
ERD (TST6049)
FM 4470/4474
C47320.03.14-R1
04/01/2015
ERD (TST6049)
FM 4470/4474
CrR-SC8995.10.15
10/14/2015
ERD (TST6049)
FM 4470/4474
CTR-SC9935.01.16
01/14/2016
ERD (TST6049)
FM 4470
CTR-SC9920.01.16-RI
01/20/2016
ERD (TST6049)
FM 4470/4474
CTR-SC10420.01.16
01/25/2016
ERD (TST6049)
FM 4470/4474
CTR-SC9175.09.16-1
09/06/2016
ERD (TST6049)
FM 4470/4474
CTR-SC9175.09.16-1
09/06/2016
ERD (TST6049)
FM 4470/4474
CTR-sc11S90.08.16-R1
09/06/2016
NEMO ETC, LLC Evaluation Report 3520.03.04-R24
Certificate of Authorization #32455 6T" EDITION (2017) FBC NON-HVHZ EVALUATION FL2533-1123
CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 651-5847 Revision 24: 06/20/2019
Page 2 of 6
Enti
ERD (TST6049)
ERD (TST6049)
ERD (TST6049)
ERD (TST6049)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
FM Approvals (TST1867)
MTI(TST2508)
MTI(TST2508)
MTI (TST2508)
MTI(TST2508)
MTl(TST2508)
MTI (TST2508)
MTI(TST2508)
NEMO (TST6049)
NEMO (TST6049)
NEMO (TST6049)
NEMO (TST6049)
MEMO (TST6049)
NEMO (TST6049)
PRI(TST5878)
PRI(TST5878)
PR1(TST5878)
PRI(TST5878)
PRI(TST5878)
PRI(TST5878)
PRI(TST5878)
PRI(TST5878)
PRI(TST5878)
PRI (TST5878)
PRI(TSTS878)
UL, LLC. (QUA962S)
MEMO ETC, LLC
Certificate of Authorization #324S5
fONEMOjetc.
Examination Reference date
FM 4470/4474 CTR-SC12255.12.16 12/27/2016
Criticality ICP-SC15630.09.17 09/06/2017
Criticality ICP-SC16225.09.17 09/06/2017
FM 4474 CRT-SC15775.17 09/13/2017
FM 4470 OE3A2.AM 03/30/1982
FM 4470 3WOA4.AM 03/16/1993
FM 4470 3WOA2.AM 03/17/1993
FM 4470 3WOA3.AM 03/17/1993
FM 4470 1Z4A6.AM 09/11/1996
FM 4470 3YSAI.AM 09/30/1996
FM 4470 ZD5A9.AM 06/22/1999
FM 4470 3009502 12/12/2000
FM 4470 3008869 03/19/2001
FM 4470 3009610 10/15/2001
FM 4470 3006025 12/28/2001
FM 4470 3012321 07/29/2002
FM 4470 3009814 09/06/2002
FM 4470 3014502 04/04/2003
FM 4470 3015444 07/11/2003
FM 4470 3014692 08/05/2003
FM 4470 3014751 08/27/2003
FM 4470 3018579 10/09/2003
FM 4470/4474 3020703 07/30/2004
FM 4470/4474 30217S9 06/03/200S
FM 4470/4474 3022038 04/05/2006
FM 4470/4474 3023458 07/18/2006
FM 4470/4474 3026128 08/04/2006
FM 4470/4474 3024311 11/01/2006
FM 4470/4474 3025766 11/13/2006
FM 4470/4474 3028410 02/19/2007
FM 4470/4474 3026964 07/25/2007
FM 4470/4474 3031262 11/30/2007
FM 4470/4474 3031199 12/23/2008
FM 4470/4474 3032172 06/12/2009
FM 4470/4474 3037127 01/11/2010
FM 4470/4474 3039848 12/02/2011
FM 4470/4474 3046104 08/13/2013
FM 4470/4474 3048520 09/19/2013
FM 4470/4474 3055491 12/05/2016
FM 4470/4474 3063970 09/14/2018
Physical properties DX08C4A 03/22/2004
Physical properties DX20E3A 03/22/2004
Physical properties DX20E3A-001 01/04/2006
Physical properties AXIIGSA 08/21/2008
Physical properties AX31G8D 09/05/2008
Physical properties AX31G8F 06/05/2009
Physical properties AX21G8C 01/28/2011
FM 4474 4L-CTR-18-002.09.18-1; CTR-C1, C2 09/21/2018
FM 4474 4L-CTR-18-002.09.18-2;CTR-C3 09/21/2018
FM 4474 4L-CTR-18-002.10.18; CTR-A1, A2, C4 10/22/2018
FM 4474 4L-CTR-18-002.03.19A;CTR-CS TO C8 03/07/2019
FM 4474 4L-CTR-18-002.04.19B; CTR-C11 04/1Z/Z019
FM 4474 2L-CTR-18-001; CTR-C9 & CTR-C10 04/17/2019
Physical Properties CTC-032-02-01 01/16/2008
Physical Properties CTC-034-02-01 11/24/2008
Physical Properties CTC-066-02-01 08/08/2011
Physical Properties CTC-067-02-01 08/08/2011
Physical Properties CTC-068-02-01 08/08/2011
Physical Properties CTC-070-02-01 08/08/2011
Physical Properties CTC-071-02-01 08/08/2011
Physical Properties CTC-093-02-01 08/08/2011
Physical Properties CTC-116-02-01 04/03/2012
Physical Properties CTC-183-02-01 10/04/2013
Physical Properties CTC-2S9-02-01 12/11/201S
Quality Assurance Service Confirmation, R11656 03/09/2017
Evaluation Report 3520.03.04-R24
6TH EDITION (2017) FBC NON-HVHZ EVALUATION FL2S33-R23
CertainTeed Flintlastie® Modified Bitumen Roof Systems; (610) 651-SS47 Revision 24: 06/20/2019
Page 3 of 6
ONEMO I etc.
PRODUCT4. DESCRIPTION'
This Evaluation Report covers Flintlastic@ Modified Bitumen Roof Systems installed in accordance with
CertainTeed Corporation published installation instructions and the Limitations / Conditions of Use herein. The
following CertainTeed products matte up the subject systems.
TABLE
TYPE
1: ROLL-GOODROLL-GOODS FOR FLINTLASTICO MODIFIED BITUMEN
PRODUCT
ROOF SYSTEMS
SPECIFICATION
REFERENCE
GRADE
TYPE
Base Sheets
Flintlastic® SA NailBase
ASTM D4601
N/A
it
Glasbase'" Base Sheet
ASTM D4601
N/A
li
All Weather/Empire'" Base
ASTM D4601
N/A
11
Flexiglas'" Base
ASTM D4601
N/A
II
Flintlastic" Base 20
ASTM D4601
N/A
II
Flintlastic Poly SMS Base Sheet
ASTM D4601
N/A
11
Yosemite nting Base
ASTM D4897
N/A
II
Ply Sheets
Flint las® PI 4
ASTM 02178
N/A
IV
Flintglas® Premium Ply 6
ASTM D2178
N/A
VI
Base/Ply Membranes (APP)
Flintlastic® APP Base T
ASTM D6S09
N/A
N/A
Flintlastic® STA
ASTM D6222
S
I
Flintlastic® STA Plus
ASTM D6222
S
I
Cap Membranes (APP}
Flintlastic® STA
ASTM D6222
S
I
Flintlastic' STA Plus
ASTM D6222
S
1
Flintlastic® GTA
ASTM 06222
G
I
Flintlastic® GTA CoolStarC'
ASTM D6222
G
1
Flintlastic® GTA-FR
ASTM D6222
G
I
Flintlastic' GTA-FR CoolStarT"
ASTM D6222
G
I
Base/Ply Membranes (SBS)
Flintlastic' SA PlyBase
ASTM D1970
N/A
N/A
Black Diamond" Base Sheet
ASTM D1970
N/A
N/A
Flintlastic SA Mid Ply
ASTM D6163
S
I
Flintlastic Ultra Glass SA
ASTM D6163
S
I
Flintlastic Base 20
ASTM D6163
S
I
Flintlastic' Base 20 T
ASTM D6163
S
I
Flintlastic Ultra Poly SMS Base Sheet
ASTM D6164
S
I
:CapMembraD(SBS)
Flintlastic FR Dual Cap
ASTM D6162
G
i
Flintlastic' SA Cap FR
ASTM D6163
G
I
Flintlastic' SA Cap FR CoolStar'"
ASTM D6163
G
i
Flintlastiti FR Cap 30
ASTM D6163
G
I
Flintlastic FR Cap 30 CoolStar'"
ASTM D6163
G
I
Flintlastic' FR Cap 30 T
ASTM D6163
G
I
Flintlastic° FR Cap 30 T CoolStar'"
ASTM D6163
G
I
Flintlastic* SA Cap
ASTM D6164
G
I
Flintlastic" SA Cap CoolStar'"
ASTM D6164
G
I
Flintlastic FR-P
ASTM D6164
G
I
oolStarT"
ASTM D6164
G
I
Flintlastic GMS
ASTM D6164
G
I
mt as Ic S CoolStar"
ASTM D6164
G
1
Flintlastic GTS-FR
ASTM D6164
G
11
Flintlastic GTS-FR CoolStar'"
ASTM D6164
G
11
Flintlastic' Premium FR-P
ASTM D6164
G
11
Flintlastic* Premium FR-P CoolStarT"
ASTM D6164
G
II
NEMO ETC, LLC Evaluation Report 3520.03.04-R24
Certificate of Authorization #32455 6T" EDITION (2017) FBC NON-HVHZ EVALUATION FL2533-1123
CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 651-5847 Revision 24: 06/20/2019
Page 4 of 6
01NIEM01 etc.
S. LIMITATIONS:
5.1 This is a building code evaluation. Neither NEW I etc. nor Robert Nieminen, P.E. are, in any way, the Designer of
Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or
design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in HVHZ jurisdictions.
5.3 This Evaluation Report does not purport to address codified fire requirements. Refer to a current Approved Roofing
Materials Directory for fire ratings of this product.
5.4 For steel deck installations, foam plastic insulation shall be separated from the building interior in accordance with
FBC 2603.4 unless the exceptions stated in FBC 2603.4.1 and 2603.6 apply.
5.5 The roof system evaluation herein pertains to above -deck roof components. Roof decks and structural members
shall be in accordance with FBC requirements to the satisfaction of the Authority Having Jurisdiction. Load
resistance of the roof deck shall be documented through proper codified and/or FBC Approval documentation.
5.6 For recover installations, the existing roof shall be examined in accordance with FBC 1511.
5.7 For mechanically attached insulation or membrane or strip -bonded insulation, the maximum design pressure for
the selected assembly shall meet or exceed the Zone 1 design pressure determined in accordance with FBC Chapter
16. Zones 2 and 3 shall employ an attachment density designed by a qualified design professional to resist the
elevated pressure criteria. Commonly used methods are ANSI/SPRI WD1, FM Loss Prevention Data Sheet 1-29,
Roofing Application Standard RAS 117 and Roofing Application Standard RAS 137. Assemblies marked with an
asterisk* carry the limitations set forth in Section 2.2.10.1 of FM Loss Prevention Data Sheet 1-29 (January 2016)
for Zone 2/3 enhancements.
5.8 For assemblies with all components fully bonded in place, the maximum design pressure for the selected assembly
shall meet or exceed critical design pressure determined in accordance with FBC Chapter 16. No rational analysis
is permitted for these systems.
5.9 For mechanically attached insulation or membrane over existing roof decks, fasteners shall be tested in the existing
deck for withdrawal resistance. A qualified design professional shall review the data for comparison to the
minimum requirements for the system. Testing and analysis shall be in accordance with ANSI/SPRI FX-1 or Testing
Application Standard TAS 105.
5.10 For bonded insulation or membrane over existing substrates in a re -roof (tear off) or recover installation, the
existing deck or existing roof surface shall be examined for compatibility with the adhesive to be installed. If any
surface conditions exist that bring system performance into question, field uplift testing in accordance with
ANSI/SPRI IA-1, ASTM E907, FM Loss Prevention Data Sheet 1-52 or Testing Application Standard TAS 124 shall
be conducted on mock-ups of the proposed new roof assembly.
5.11 For bonded insulation or membrane over existing substrates in a recover installation, the existing roof system shall
be capable of resisting project design pressures on its own merit to the satisfaction of the Authority Having
Jurisdiction, as documented through field uplift testing in accordance with ASTM E907, FM Loss Prevention Data
Sheet 1-52 or Testing Application Standard TAS 124.
5.12 Metal edge attachment (except gutters), shall be designed and installed for wind loads in accordance with FBC
Chapter 16 and tested for resistance in accordance with ANSI/SPRI ES-1 or Roofing Application Standard RAS 111,
except the basic wind speed shall be determined from FBC Figure 1609.3(1),1609.3(2) or 1609.3(3).
5.13 All products in the roof assembly shall have quality assurance in accordance with FAC Rule 61G20-3.
NEMO ETC, LLC Evaluation Report 3520.03.04-R24
Certificate of Authorization #32455 6T" EDITION (2017) FBC NON-HVHZ EVALUATION FL2533-R23
CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 651-5847 Revision 24. 06/20/2019
Page 5 of 6
6.1 Flintlastic" Modified Bitumen Roof Systems shall be installed in accordance with CertainTeed Corporation
published installation instructions, subject to the Limitations / Conditions of Use herein.
6.2 System attachment requirements for wind load resistance are set forth in Appendix 1. "MDP" = Maximum Design
Pressure is the result of testing for wind load resistance based on allowable wind loads, and reflects the ultimate
passing pressure divided by 2 (the 2 to 1 margin of safety per FBC 1SO4.9 has already been applied). Refer to FBC
1609 for determination of design wind loads.
7. BUILDING e
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of
this product.
MANUFACTURING PLANTS:
Contact the named QA entity for manufacturing facilities covered by F.A.C. Rule 61G20-3 QA requirements.
QUALITY AssuRANcE ENTITY:
UL, LLC. — QUA9625; (414) 248-6409, karen.buchmann@us.ul.com
- THE 67-PAGES THAT FOLLOW FORM PART OF THIS EVALUATION REPORT -
NEMO ETC, LLC Evaluation Report 3520.03.04-R24
Certificate of Authorization #32455 6t" EDITION (2017) FBC NON-HVHZ EVALUATION FL2533-R23
CertainTeed Flintlastic® Modified Bitumen Roof Systems; (610) 651-5847 Revision 24: 06/20/2019
Page 6 of 6