HomeMy WebLinkAboutProduct Evaluation ReportR W R W Building Consultants, Inc.
BConsulting and Engineering Services for the Building Industry
C P.O. Box 230 Valrico, FL 33595 Phone S13.659.9197
,
Florida Board of Professional Engineers Certificate ofAuthorbation No. 9813
Product
Category
Sub Category
Manufacturer
Product Name
Swinging
Therma-Tru Corporation
Fiber -Classic and Smooth -star
Exterior
Exterior Door
118 Industrial Or
Composite Edge Opaque Fiberglass Single Door
Doors
Assemblies
Edgerton, OH 43517
43517
Inswing I Outswing
Phone 419•
"Non-ImpaW
Scope: Product Evaluation report issued by R W Building Consultants, Inc. & Lyndon F. Schmidt, P.E. (System ID # 1998) for
Thera-Tm Corporations, based on Rule Chapter No. 61G20-3, Method 1 D of the State of Florida Product Approval, Dept
of Business & Professional Regulation.
RW Building Consultants and Lyndon F. Schmidt, P.E. do not have nor will acquire financial interest in the company
manufacturing or distributing the product or in any other entity involved in the approval process of the product named
herein.
Limitations:
1. This product has been evaluated and is in compliance with the 61h Edition (2017) Florida Building Code (FBC) structural requirements
excluding the "High Velocity Hurricane Zone" (HVHZ).
2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment to base material shall be beyond wall dressing
or stucco.
3. For 2x stud framing construction, anchoring of these units shall be the same as that shown for 2x buck masonry construction.
4. Site conditions that deviate from the details of drawing FL-20461.1 require further engineering analysis by a licensed engineer or
registered architect
5. Fiber -Classic & Smooth -Star Door panels require the use of "J" part numbers and must be stained or painted within six months of
Installation
6. See drawing FL-20461.1 for size and design pressure limitations.
Supporting Documents:
1. Test Report No. Test Standard
TEL 01460145 ASTM E330(02), ASTM E331(00)
TEL 01461573 ASTM E330-02 & ASTM E331-00
2. Drawing No. Prepared by
No. FL-20461.1 RW Building Consultants, Inc. (CA #9813)
3. Calculations Prepared by
Anchoring RW Building Consultants, Inc. (CA #9813)
4. Quality Assurance
Certificate of Participation issued by National Accreditation &
Management Institute, certifying that Thera-Tru Corporations is
manufacturing products within a quality assurance program that
compries with ISO/IEC 17020 and Guide 53.
Sheet 1 of 1
Testing Laboratory Signed by
Testing Evaluation Lab.,lnc. V.K Wright
Testing Evaluation Leb.,lno. V.K Wright
Signed & Sealed by
Lyndon F. Schmidt, P.E.
Signed & Sealed by
Lyndon F. Schmidt, P.E.
Lyndon F. Schmidt, P.E.
FL PE No. 43409
12fir2017