HomeMy WebLinkAboutDrawing Q �
00 � a IX2
Kruger Construction Corp.
6695 N. US #1 Unit B
Vero Beach, Fla. 32967
Phone: 772-569-5496
Fax: 772-569-9115
HARDWARE AND ATTACHMENT DETAILS FOR
SCREEN FILL IN AND FRONT ENTRIES UNDER EXISTING ROOFS
A
B C D
E
A= 1x2 aluminum screen channel attached to floor, side walls, concrete columns, wood post
and top beam with '/4 X 2 1/4"tap-cons with 1 within 6" of edges and post and then 24" on center.
If connecting to wood, sub out tap-cons for#10 x 2" sheet metal screws.
B =2x2 and or 2x3 aluminum post connected to lx2 with 2 - 1"x1"x 2" angle clips (1 each side) top
and bottom with 4 -#8 sheet metal or self-tapping screws.
C =2x2 aluminum door jamb connection to 1x2 with 1 — 1"x 1"x 2" angle clip top and bottom
With 4 - #8 sheet metal or self-tapping screws.
D =2x2 aluminum doorjamb connected to house with 1/4" x 3"tap-con, 1 within 6" of edge and
then 24" on center. If connecting to wood use#10 x 3" sheet metal screws. In some cases
for out of plum walls a receiver may be needed.
E=2x2 aluminum chair-rail or kick plate rail connected to 1x2 or post with 1 — 1"x 1"x 2"
angle clip on the underside of rail at each end (2 per rail) with 4 - #8 sheet metal or self—
tapping screws.
F =If kick plate is added to job it will be connected thru roll form kick plate channel to aluminum structure
with#8 sheet metal or self-tapping screws, 1 within 2" from each edge and then every 16" on center.
G=If there are pavers and an 8x8 concrete piling is needed at doorjamb or uprights,then we will add a 5"
tap con on 1 side of door jambs and both sides of uprights