HomeMy WebLinkAboutREED PERMIT616/20/22 kW
Model #
G006463-4
G005819-0
G007101-0
G007102-0
G007103-0
G005621-0
G007027-0 - Bisque
GENERAC
available accessories
Product Description
Generac's Mobile Link allows you to check the status of your generator from anywhere that you have ac-
Mobile Link" cess to an Internet connection from a PC or with any smart device. You will even be notified via e-mail or
text message when a change in the generator's status occurs. Available in the U.S. only.
26R Wet Cell Battery Every standby generator requires a battery to start the system. Generac offers the recommended 26R wet
cell battery for use with all air-cooled standby product (excluding PowerPact®).
Battery Pad Warmer The pad warmer rests underthe battery. Recommended for use if the temperature regularly falls below 0°F.
(Not necessary for use with AGM -style batteries).
Oil Warmer Oil warmer slips directly over the oil filter. Recommended for use if the temperature regularly falls below
O'F.
Breather Warmer
Auxiliary Transfer Switch
Contact Kit
Fascia Base Wrap Kit
(Standard on 22 kW)
6005703-0 - Bisque Paint Kit
I
G006485-0 i Scheduled Maintenance Kit
G006873-0
Smart Management Module
i (50 Amps)
727.2 mm
[28.6 In]
The breather warmer is for use in extreme cold weather applications. For use with Evolution controllers
only in climates where heavy icing occurs.
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electrical load
you may not need. Not compatible with 50 amp pre -wired switches.
The fascia base wrap snaps together around the bottom of the new air cooled generators. This offers a
sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting
holes located in the base.
If the generator enclosure is scratched or damaged, it is important to touch-up the paint to protect from
future corrosion. The paint kit includes the necessary paint to properly maintain or touch-up a generator
enclosure.
Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine
maintenance on a Generac automatic standby generator.
Smart Management Modules are used in conjunction with the Automatic Transfer Switch to increase its
power management capabilities. It provides additional power management flexibility not found in any other
power management system.
dimensions & PCs
Dimensions shown are approximate. Refer to installation manual for exact dimensions. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
- - - 637.6 — -- ----
125.1 1�1
[26.6 InJ
LEFT SIDE VIEW
GENERAC°
1248 mm
148.0 In,
[48.5 88
FRONT VIEW
Model
UPC
G007035-0
696471070354
0007036-0
696471070361
G007037-0
696471070378
G007038-0
696471070385
G007039-0
696471070392
G007042-0
696471070422
G007043-0
696471070439
Generac Power Systems, Inc. • 645 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
02016 Generac Power Systems, Inc. All nghts reserved. All specifications are subject to charge without notice. Part No. 10000000194-D 10/24/16