HomeMy WebLinkAboutTU Plus UnderlaymentFlorida Building Code Online
Page 1 of 2
Professional
W60
SCIS Home I Log in I User Registration I Hot Topics I Submit Surcharge I Stats & Facts I Publications I contact us I SCIS Site Map I Links ! Search
F ,l itr{7
Robert Nleminen
Product Approval
rO USER: Public User
PE -59166
(J4gllW,JyWMVj LM= > Product or Auollca[Ion
egarch > Aonllcatlon Ust > bnhcation Htstery > Applicatlon Detail
FIL
IF -5259-R28
` Application Type
Revision
Code Version
2017
Application Status
Approved
Comments
Archived
Product Manufacturer POLYGLASS USA
Address/Phone/Email 1111 W, Newport Center Drive
Deerfield Beach, FL 33442
(954) 233-1330 Ext 242
malpert@polyglass,com
Authorized Signature Maury Alpert
malpert@polyglass.com
Technical Representative Maury Alpert
Address/Phone/Email 1111 W. Newport Center Drive
Deerfield Beach, FL 33442
(912)429-8610
MAIpert@polyglass.com
Quality Assurance Representative Arlel Lender
Address/Phone/Email 1111 W. Newport Center Drive
Deerfield Beach, FL 33442
(954)233-1230
ALender@polyglass.com
Category Roofing
Subcategory Underlayments
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed
Florida Professional Engineer
I I Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed
Robert Nleminen
the Evaluation Report
Florida License
PE -59166
Quality Assurance Entity
UL LLC
Quality Assurance Contract Expiration Date
09/13/2021
Validated By
John W, Knezevlch, PE
I Validation Checklist - Hardcopy Received
CertlFlcate of Independence FL525 ftZ _C9Z�i.0.1.� 01..[QLN1E€ it .Flti,f1.cif
Referenced Standard and Year (of Standard) Standard Year
ASTM D1970 2015
ASTM D226 2009
ASTM D4798 2011
ASTM D6164 2011
ASTM D6222 2011
FM 4474 2011
FRSA/TRI April 2012 2012
UL 1897 2012
http://www.floridabuilding.org/prlpr_app_dtl.aspx?param=wGEVXQwtDgvbSgAaZp3 Crk... 4/15/2020
Florida Building Code Online
Egjlvalence of Product Standards
Certified By
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted
01/24/2018
Date Validated
01/29/2018
Date Pending FSC Approval
01/30/2018
Date Approved
04/10/2018
Date Revised
10/15/2019
Surnma of Products
Page 2 of 2
�L # Mo del, Number or Name
Descriptioniption
5259,1 Polyglass Roof
Roofing underlayments
Underlayments
Llmlts of Use
Installation Instructions
Approved for use in HVHZ: No
✓ l-5225 R2R IT 7DIR 01 FINAL ER POiYGLAS5I,INE]ERLALnjl5j-L5259--
R28.odf
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Verified By: Robert Nleminen PE -59166
Design Pressure: +N/A/ -622.5
Created by Independent Third Party: Yes
Others 1.) The design pressure In this
Evaluation Reports
application relates to one particular
f ;�n_f3 ft tiE?01 01 FINAL ER POLYG SS NMLAYMENTS FL5259-
R28.odf
underlayment system (over concrete deck)
for use under foam -on the systems (where
Created by Independent Third Party: Yes
the underlayment forms part of the load -
path). Refer to ER Section 5.6.4 for other
systems, other deck types and associated
maximum design pressures. 2.) Refer to ER
Section 5 for other Ilmlts of use.
Contact Us:: M01 Blair Sic glt Roo b, Inlialio149r, EL3234 Phoned 1150.487-1824
The State of Florida Is an AA/EEO employer. Coavrlaht 20074013 Slate of Florida.:: Privacy Statement i t Acresslbthly Statement ;; Refund Statement
under Florida law, on+atl addresses are public records. If you do not wont your a•ma II address rakosed In rosponua to a pubilcrecords request, do not send electronic
mall to this entity. instead, cuntacl Lhe orflce by phme or by traditional mail. If you have any queetlons, please enntact 654.487.1395. 'Pursue nt to Section 455.275
(1), Florida Statures, effective October 1, 2412, ilcen"ei ilrenaed undar Chapter 455, F,S, must provide the nepartment with an email a4drasi It they have aha. The
on ells provided may be used for offleAt cnmmuntcatlon with the kcansee. However email addresses are public record, If you do not with to supply a personal address,
dsase provide She Department with an small address which can be meds available to the put!Ic, To determine If you are a licensee under Chapter 455, F,S„ please
click DNL.
Product Approval Accepts
WNo IR E
Credit Card
Safe
http://www.floridabuilding.org/prlpr_app_dtl.aspx?param=wGEVXQwtDgvbSgAaZp3 Crk... 4/15/2020
ENGINEER EVALUATE TEST CONSULT
EVALUATION REPORT
Polyglass USA, Inc.
1111 West Newport Center Drive
Deerfield Beach, FL 33442
(954)233-1230
MEMO I etc.
Certificate of Authorization #32455
353 Christian Street, Unit #13
Oxford, CT 06478
(203) 262-9245
CERTIFY
Evaluation Report P12060.02.09 -R24
FL5259-R28
Date of Issuance: 02/24/2009
Revision 24: 01/24/2018
SCOPE:
This Evaluation Report is Issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials In the State of Florida. The documentation submitted has been reviewed by Robert Nleminen, P.E.
for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The products
described herein have been evaluated for compliance with the 61h Edition (2017) Florida Building Code sections noted
herein.
DESCRIPTION: Polyglass Roof Underlayments
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced
Quality Assurance documentation changes, or provisions of the Code that relate to the product change. Acceptance of this
Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. of any changes to the
product(s), the Quality Assurance or the production facility location(s). NEMOIetc. requires a complete review of this
Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "NEMO I etc. Evaluated" may be displayed In
advertising literature. If any portion of the Evaluation Report Is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or Its
distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 14.
Prepared by: i�1++?�err;l+rsy
Robert J.M. Nieminen P.E. &
The facslmlle seal appearing was authorized by Robert Nleminen,
Florida Reglstratlon No. 59-66, Florida DCA ANE1983 P.E. on 01/24/2018. This does not serve as an electronically
signed document,
CERTIFICATION OF INDEPENDENCE:
1. NEMOIetc. does not have, nor does It Intend to acquire or will It acquire, a financial interest In any company manufacturing or
distributing products It evaluates.
2. NEMOI etc. Is not owned, operated or controlled by any company manufacturing or distributing products It evaluates.
3. Robert Nleminen, P,E. does not have nor will acquire, a financial interest In any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E, does not have, nor will acquire, a financial interest In any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither NEW I etc. nor Robert Nleminen, P.E. are, in any way, the Designer of Record for any
project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
ONEMOletc.
ROOFING COMPONENT EVALUATION;
1. SCOPE:
Product Category: Roofing
Sub -Category: Underlayment
Compliance Statement: Roof Underlayments, as produced by Polyglass USA, Inc., have demonstrated compl)ance with the
following sections of the 6th Edition (2017) Florida Building Code through testing in accordance with the following Standards.
Compliance is subject to the Installation Requirements and Limitations / Conditions of Use set forth herein.
2. STANDARDS:
Section
Property
Standard
Year
1504.3.1
Wind Uplift
FM 4474
2011
1504.3.1
Wind Uplift
UL 1897
2012
1507.2.3 / 1507.1.1
Physical Properties
ASTM D226
2009
1507.2.4 / 1507.1.1, 1507.2.9.2
Physical Properties
ASTM D1970
2015
1507.3.3
Physical Properties
FRSA/TRI April 2012
2012
1507.11.2
Physical Properties
ASTM D6164
2011
1507.11.2
Physical Properties
ASTM D6222
2011
TAS 110
Accelerated Weathering
ASTM D4798
2011
3. REFERENCES:
Entity
Examination
Reference
Date
FM Approvals (TST 1867)
Wind Uplift
3004091
01/12/2000
PRI (TST 5878)
Physical Properties
PRI01111
04/08/2002
PRI (TST 5878)
Physical Properties
PUSA-005-02-01
01/31/2002
PRI (TST 5878)
Physical Properties
PUSA-013-02-01
12/23/2002
PRI (TST 5878)
Physical Properties
PUSA-013-02-02
12/23/2002
PRI (TST 5878)
Physical Properties
PUSA-013-02-03
12/23/2002
PRI (TST 5878)
Physical Properties
PUSA-018-02-01
07/14/2003
PRI (TST 5878)
Physical Properties
PUSA-028-02-01
07/13/2005
PRI (TST 5878)
Physical Properties
PUSA-033.02-01
01/12/2006
PRI (TST 5878)
Physical Properties
PUSA-035-02-01
09/29/2006
PRI (TST 5878)
Physical Properties
PUSA-055-02-02
12/10/2007
PRI (TST 5878)
Physical Properties
PUSA-061-02-02
01/28/2008
PRI (TST 5878)
Physical Properties
PUSA-076-02-01
02/22/2008
PRI (TST 5878)
Physical Properties
PUSA-083-02-01
04/14/2008
PRI (TST 5878)
Physical Properties
PUSA-088-02-01
07/29/2009
MTI (TST 2508)
Physical Properties
JX20H7A
04/01/2008
MTI (TST 2508)
Physical Properties
RXI4ESA
01/29/2009
ERD (TST 6049)
Physical Properties
11752.09.99-1
02/08/2000
ERD (TST 6049)
Wind Uplift
11757.08.01-1
08/13/2001
ERD (TST 6049)
Wind Uplift
11776.06.02
01/16/2003
ERD (TST 6049)
Physical Properties
02200.07.03
07/14/2003
ERD (TST 6049)
Wind Uplift
P1740.01.07
01/04/2007
ERD (TST 6049)
Physical Properties
P5110.04.07-1
04/11/2007
ERD (TST 6049)
Wind Uplift
P9260.03.08
03/21/2008
ERD (TST 6049)
Physical Properties
P13450.08.09
08/13/2009
ERD (TST 6049)
Wind Uplift
P30540.11.09 -R1
11/30/2009
ERD (TST 6049)
Physical Properties
P11030.11.09-1
11/30/2009
ERD (TST 6049)
Wind Uplift
P11030.11.09-2
11/30/2009
ERD (TST 6049)
Physical Properties
P11030.11.09-3
11/30/2009
ERD (TST 6049)
Physical Properties
P33360.06.10
06/25/2010
ERD (TST 6049)
Physical Properties
P33370.03.11
03/02/2011
ERD (TST 6049)
Physical Properties
P33370.04.11
04/26/2011
ERD (TST 6049)
Physical Properties
P37300.10,11
10/19/2011
NEMO ETC, I.I.C. Evaluation Report P12060.02.09 -R24
Certificate of Authorization #32455 6T" EDITION (2017) FBC NON-HVH2 EVALUATION FLSZS9-RIB
Polyglass Roof Underlayments; (954) 233-1230 Revision 24: 01/24/2018
Page 2 of 14
Entity
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ERD (TST 6049)
ICC -ES (EVL 2396)
Miami -Dade (CER 1552)
Polyglass USA
Polyglass USA
Polyglass USA
UL, LLC. (QUA9625)
4. PRODUCT DESCRIPTION:
Examination
Physical Properties
Physical Properties
Physical Properties
Wind Uplift
Physical Properties
Wind Uplift
Wind Uplift
Wind Uplift
Wind Uplift
Wind Uplift
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Physical Properties
Wind Uplift
Physical Properties
Wind Uplift
Physical Properties
Physical Properties
Physical Properties
IBC Compliance
HVHZ Compliance
Manufacturing Affidavit
P/L Affidavlt
Materials Affidavit
Quality Control
Reference
P40390.08.12-1
P40390.08.12-2
C41420.09.12-3
P39680.03.13
P45370.04,13
P1738.02.07 -R2
11757.04.01-1-R1
P41630.08.13
P11751.05.03 -R1
P11781.11.03 -R1
P45270,05,14
6020.07.14-1
6020.09.14-2
6020.09,14-3
6020.09.14-4
6020.09.14-5
6020.09.14-6
P46520.10.14
P43290.10.14
PLYG-SC7550.03.15
P40390.04.15
P44360.10.14 -R1
PLYG-SC8080.05.15-1
PLYG-SC8905.05.16-1
PLYG-SC8080.07.16
PLYG-SC12025.10.16
PLYG-SC13040,12.16
PLYG-SC11900.03.17
PLYG-SC12115.08.17
ESR -1697
NOA 14-0717.08
Products Current
Mule -Hide Cross Ltg
Polystick SA Compound
Service Confirmation
*NEMOletc.
Date
08/06/2012
08/07/2012
09/11/2012
03/04/2013
04/26/2013
04/29/2013
04/30/2013
08/06/2013
11/26/2013
11/26/2013
05/12/2014
09/08/2014
09/08/2014
09/08/2014
09/08/2014
09/08/2014
09/08/2014
10/03/2014
10/17/2014
03/24/2015
04/03/2015
05/18/2015
05/20/2015
05/17/2016
07/16/2016
10/12/2016
12/27/2016
03/10/2017
08/08/2017
11/01/2014
01/22/2015
02/18/2009
03/01/2008
08/18/2011
Exp. 10/05/2018
4.1 Mechanically Fastened Underlayrnents:
4.1.1 Elastobase is a fiberglass reinforced, SBS modified bitumen base sheet.
4.1.2 Elastobase P is a polyester -reinforced, SBS modified bitumen base sheet.
4.1.3 Polyglass G2 Base is a fiberglass -reinforced, asphaltic base sheet.
4.1.4 Polyglass APP Base is a fiberglass -reinforced, APP modified bitumen base sheet.
4.2 Self-Adhering-Underlayments:
4.2.1 Polystick MTS or Polystick MTS PLUS is a nominal 60 -mil thick rubberized asphalt waterproofing membrane, glass
fiber reWorced, surfaced with polyolefinic film surface; meets FRSA/TRI April 2012.
4.2.2 Polystick IR -Xe is a nominal 60 -mil thick rubberized asphalt waterproofing membrane, glass fiber reinforced, with an
aggregate surface; meets ASTM D1970.
4.2.3 Polystick TU Plus is a nominal 80 -mil thick rubberized asphalt waterproofing membrane, glass fiber reinforced, with a
polyester fabric surface; meets ASTM D1970 and FRSA/TRI April 2012.
NEMO ETC, LLC. Evaluatlon Report P12060.02.09 -R24
certificate of Authorization #32455 GTI EDITION 12017) FOC NON-HVHZ EVALUATION FL52S9-R28
Polyglass Roof Underlayments; (954) 233-1230 Revlslon 24:01/24/2018
Page 3 of 14
OMEMO I etc.
4.2.4 Polystick TU P is a nominal 130-mil thick rubberized asphalt waterproofing membrane, glass-fiber/polyester
reinforced, with a granular surface; meets FRSA/TRI April 2012.
4.2.5 Polystick TU Max is a nominal 60-mil thick rubberized asphalt waterproofing membrane with a 190 g/mz polyester
fabric surface; meets ASTM D1970 and FRSA/TRI April 2012.
4.2.6 Polyflex SAP, Polyflex SAP FR, Mule-Hide SA-APP Cap Sheet and Mule-Hide SA-APP Cap Sheet (FR) are polyester
reinforced, APP modified bitumen cap sheets; meet FRSA/TRI April 2012.
4.2.7 Polystick Dual Pro'" is a nominal 60-mil thick dual -layer rubberized asphalt waterproofing membrane, fiberglass
reinforced, with a polyester fabric surface; meets ASTM D1970.
4.2.8 Polystick Tile Pro'"' is a nominal 60-mil thick dual -layer rubberized asphalt waterproofing membrane, fiberglass
reinforced, with a polyester fabric surface; meets ASTM D1970 and FRSA/TRI April 2012.
4.2.9 Polystick MU-X is a nominal 54-mil thick dual -layer rubberized asphalt waterproofing membrane, fiberglass
reinforced, with a polypropylene film surface; meets AC188 and physical requirements of ASTM D1970 (See Section
5.8).
4.3 Mechanlcally Fastened and/or Bonded Underlayments:
4.3.1 Elastoflex G TU is a polyester reinforced, modified bitumen the underlayment composed of a sand-surfaced SBS
modified oltumen back-side and granule-surfaced APP modified bitumen top-side. Elastoflex G TU is for use as an
alternate to "Mineral Surface Roll Roofing" (ASTM D6380, Class M) In the "Single Ply System" from FRSA/TRI April
2012 (04-12) beneath mechanically fastened the roof systems or Hot Asphalt applied "Cap Sheet" in the "Two Ply
System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened or adhered tile roof systems,
4.3.2 Elastoflex S6 G and Elastoflex S6 G FR are polyester reinforced, SBS modified bitumen cap sheets; meet ASTM D6164.
Elastoflex 56 G and Elastoflex 56 G FR are for use as an alternate to "Mineral Surface Roll Roofing" (ASTM D6380,
Class M) in the "Single Ply System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened tile roof systems.
Elastoflex 56 G is for use as an alternate to Hot Asphalt applied "Cap Sheet" in the "Two Ply System" from FRSA/TRI
April 2012 (04-12) beneath mechanically fastened or adhered tile roof systems. Elastoflex S6 G FR is for use as an
alternate to Hot Asphalt applied "Cap Sheet" in the "Two Ply System" from FRSA/TRI April 2012 (04-12) beneath
mechanically fastened tile roof systems.
4.3.3 Polyflex 6 and Polyflex G FR are polyester reinforced, APP modified bitumen cap sheets; meet ASTM D6222.
Polyflex G is for use as an alternate to Heat Applied "Cap Sheet" In the "Two Ply System" from FRSA/TRI April 2012
(04-12) beneath mechanically fastened or adhered tile roof systems. Polyflex G FR is for use as an alternate to Heat
Applied "Cap Sheet" in the "Two Ply System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened tile
roof systems.
LIMITATIONS:
5.1 This is a building code evaluation. Neither NEMOletc. nor Robert Nieminen, P,E. are, in any way, the Designer of
Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or
design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in the HVHZ.
5.3 Fire Classification Is not part of this Evaluation Report; refer to current Approved Roofing Materials Directory for fire
ratings of this product.
5.4 Polyglass 3oof Underlayments may be used with any prepared roof cover where the product Is specifically referenced
within FBC approval documents. If not listed, a request may be made to the Authority Havlrig Jurisdiction for
approval based on this evaluation combined with supporting data for the prepared roof covering.
NEMO ETC, I.I.C. Evaluatlon Report P12060.02.09-1124
certificate of Authorization #37455 6TM EDITION (2017) FOC NON-HVHZ EVALUATION FL5259-R28
Polyglass Roof Underlayments; (954) 233-1230 Revision 24: 01/24/2018
Page 4 of 14
ONEMOjetc.
5.5 Allowabie Roof Covers:
5.5.1 "Foam -on Tile" is limited to use of the following Approved tile adhesives / underlayment combinations.
TABLE 1A: ALLOWABLE TILE ADHESIVE / UNDERLAYMENT COMBINATIONS'
Adhesive
TABLE 1: ROOF COVER OPTIONS
Underlayments
Approval
Underlayment
Asphalt Shingles
Nail -On Tile
Foam -On Tile
Metal
Wood Shakes
& Shingles
Slate
Elastobase
Yes
Yes
jBase Sheet In 2 -ply system)
Yes
(Base Sheet In 2 -ply system)
Yes
Yes
Yes
Elastobase P
I Yes
Yes
(Base Sheet In 2-13IV system)
Yes
(Base Sheet In 2 -ply system)
yes
Yes
Yes
Polyglass G2 Base
No
s
(Base Sheet net -ply system)
Yes
(Base Sheet In 2 -ply system)
NO
NO
NO
Polyglass APP Base
No
Yes
(ease Sheet In 2. ply systaml
Yes
(Base Sheet In 2-plv systeml
No
No
No
PolVstick MTS or MTS PLUS
Yes
Yes
No
Yes
Yes
Yes
PolVstick IR -Xe
Yes
No
No
No
Yes
Yes
Polystick TU P
No
Yes
Yes (See 5.5.1)
No
No
No
Polystick TU Plus
Yes
Yes
Yes (See 5.5.1)
Yes
Yes
Yes
No
Yes
Yes (See 5.5.1)
Yes
No
No
Polystick Dual Pro
Yes
No
No
Yes
Yes
Yes
Polystick Tile Pro
Polystick MU -X
Yes
Yes
Yes (See 5.5,1)
Yes
Yes
Yes
Yes
No No Yes
Yes
Yes
Elastoflex S6 G
Yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
Elastoflex S6 G FR
Yes
Yes
No
No
Yes
Yes
Elastoflex G TU
Yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
Polyflex G
Yes
Yes
Yes (See 5.5,1)
No
Yes
Yes
Polyflex G FR
Yes
Yes
No
No
Yes
Yes
Polyflex SAP or SAP FR
Yes
Yes
Yes (See 5.5.1)
No
Yes
Yes
Mule -Hide SA -APP Cap Sheet
or SA -APP Cap Sheet (FR)
Yes
Yes
Yes (See 5.5, 1)
No
Yes
Yes
5.5.1 "Foam -on Tile" is limited to use of the following Approved tile adhesives / underlayment combinations.
TABLE 1A: ALLOWABLE TILE ADHESIVE / UNDERLAYMENT COMBINATIONS'
Adhesive
Florida Product
Underlayments
Approval
DAP Foam Touch 'n Seal Storm Bond Roof
FL14506
Polystick TU Plus, Polystick TU Max
Tile Adhesive
Dow TileBond•"
FL22525
Polystick TU P, Polystick TU Plus, Polyflex SAP or Tile Pro
Polystick TU P, Polystick TU Plus, Polystick TU Max, Polystick Tile Pro,
ICP Adhesives Polyset® AH -160
FL6332
Elastoflex G TU, Elastoflex S6 G, Polyflex G, Polyflex SAP, Polyflex SA Cap FR,
Mule -Hide SA -APP Cap Sheet or Mule -Hide SA -APP Cap Sheet (FR)
Polystick TU P, Polystick TU Plus, Polystick TU Max, Polystick Tile Pro,
ICP Adhesives Polyse ® RTA -1
FL6276
Elastoflex G TU, Elastoflex S6 G, Polyflex G, Polyflex SAP, Polyflex SA Cap FR,
Mule -Hide 5A -APP Cap Sheet or Mule -Hide SA -APP Cap Sheet (FR)
' Refer to Tile Manufacturer's orAdheslve Manufacturer's Florida Product Approval for Overturning Moment Resistance Performance.
NEMO ETC, I.I.C. Evaluation Report P12060.02.09 -R24
Certificate of Authorization #82155 6tH EDITION (2017) FBC NON-HVHZ EVALUATION F1.5259-1128
Polyglass Roof Underlayments; (954) 233-1230 Revlslon 24: 01/24/2016
Page 5 of 14
ONEMOJetc.
5.6 Allowable Substrates:
5.6.1 Direct -Bond to Deck:
Polystick lall variations), Dual Pro, Tile Pro, Polyflex SAP or SAP FR, Mule -Hide SA -APP Cap Sheet or SA -APP Cap Sheet
(FR) self -adhered to:
➢ New u-itreated plywood; ASTM D41 primed new untreated plywood; Existing plywood; ASTM D41 primed existing
plywood; New or existing, unprimed OSB; ASTM D41 primed OSB; Southern Yellow Pine; ASTM D41 primed
Southern Yellow Pine; ASTM D41 primed structural concrete; Huber Engineered Woods "ZIP System" Panels
(desigred and installed to meet wind loads for project).
Note: Polyglass does not require prlming of new or existing plywood or OSB sheathing. New or existing plywood or
OSB sheathing should be cleaned of all dirt and debris prior to application of Polystick membranes.
Elastoflex G TU, Elastoflex S6 G or Elastoflex 56 G FR In hot asphalt to:
➢ ASTM D41 primed structural concrete.
Polyflex G or Polyflex G FR torch -applied to:
➢ ASTM D41 primed structural concrete.
5.6.2 Bond -to -Insulation:
Polystick lall variations), Polyflex SAP or SAP FR, Mule -Hide SA -APP Cap Sheet or SA -APP Cap Sheet (FR) self -adhered
to:
➢ ASTM C1289, Type II, Class 1 polylsocyan u rate or Type V polyisocyanurate-composite insulation; Dens Deck
DuraGuard; Dens Deck Prime; or SECUROCK Gypsum -Fiber Roof Board.
Elastoflex G TU, Elastoflex 56 G or Elastoflex S6 G FR in hot asphalt to:
➢ Dens Deck Prime or SECUROCK Gypsum -Fiber Roof Board.
Polyflex G or Polyflex G FR torch -applied to:
D ASTM D41 primed structural concrete; Dens Deck Prime or SECUROCK Gypsum -Fiber Roof Board.
For instal ation under mechanically attached prepared roof coverings, insulation shall be attached per minimum
requirements of the prepared roof covering manufacturer's Product Approval. For installatlons under foam -on tile
systems, insulation attachment shall be designed by a qualified design professional and installed based on testing of
the insulation/underlayment system in accordance with FBC Section 1504.3.1.
5.6.3 Bond to Mechanically Attached Base Lave :
Polystick lall variations), Polyflex SAP or SAP FR, Mule -Hide SA -APP Cap Sheet or SA -APP Cap Sheet (FR) Dual Pro or
Tile Pro self -adhered to:
➢ ASTM D226, Type I or II felt; Elastobase; Elastobase P or Mule -Hide Nail Base.
Elastoflex G TU, Elastoflex 56 G or Elastoflex S6 G FR In hot asphalt to:
➢ ASTM D226, Type I or II felt; Elastobase; Elastobase P, Mule -Hide Nail Base or Polyglass G2 Base.
Polyflex G or Polyflex G FR torch-applled to:
➢ Elastobase; Elastobase P, Mule -Hide Nail Base, Polyglass G2 Base or Polyglass APP Base.
For Installations under mechanically attached prepared roof coverings, base layer shall be attached per minimum
codified requirements. For Installations under foam -on tile systems, base layer shall be attached per minimum
requirements of FRSA/TRI April 2012 (04-12), Appendix A, Table 1, or as listed in Section 5.6.4 herein, or as tested in
accordance with FBC Section 1504.3.1.
NEMO ETC, LLC. Evaluatlon Report P12060.02.09 -R24
Certiftate oJAuthorliatlon #324_`5 6TH EDITION (2017) FBC NON-HVHZ EVALUATION FL5259-R28
Polyglass Roof Underlayments; (954) 2334230 Revision 24: 01/24/2018
Page 6 of 14
NNEMOletc.
5.6.4 Wind Resistance for Underlayment 5vsterns In Foam Tile Applications: FRSA/TRI April 2012 (04-12) does not
address wind uplift resistance of all underlayment systems beneath foam-on the systems, where the underlayment
forms part of the load-path. The following wind uplift limitations apply to underlayment systems that are not
addressed In FRSA/TRI April 2012 (04-12) and are used in foam-on the applications. Maximum Design Pressure is the
result of testing for wind load resistance based on allowable wind loads, and reflects the ultimate passing pressure
divided by 2 (the 2 to 1 margin of safety per FBC 1504.9 has already been applied). Refer to FRSA/TRI April 2012 (04-
12), Appendix A, Table 1A or FBC 1609 for determination of design wind loads.
#1 Maximum Degign Pressure = -90 DO:
Deck: Min. 15/32-Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: None
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self-adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule-Hide SA-APP Cap Sheet and
Mule-Hide SA-APP Cap Sheet (FR), self-adhered.
#2 Maximum Design Pressure = -97.5 Psf:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: PG100 or ASTM D41
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self-adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule-Hide SA-APP Cap Sheet and
Mule-Hide SA-APP Cap Sheet (FR), self-adhered and back-nailed within the selvedge-edge side laps using 12 ga. x
1'/," ring shank nails through 32 ga., 1-5/8" diameter tin caps spaced 12-Inch o.c.
#3 MaxiM.0 QMIR Pressure = -105 Dsf:
Deck: Min. 15/32-Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: WB-3000
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self-adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule-Hide SA-APP Cap Sheet and
Mule-Hide SA-APP Cap Sheet (FR), self-adhered and back-nalled within the selvedge-edge side laps using 12 ga, x
1'/." ring shank nails through 32 ga., 1-5/8" diameter tin caps spaced 12-inch o,c,
#4 Maximum Design Pressure = -135 Dsf:
Deck: Min. 15/32-Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: (Optional) PG100 or ASTM D41
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self-adhered.
Joints: Min. 4-Inch wide strips of Elastoflex SA-V over all plywood joints.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule-Hide SA-APP Cap Sheet and
Mule-Hide SA-APP Cap Sheet (FR), self-adhered.
#5 Maximum Design Pressure = -315 Ds #:
Deck: Structural concrete to meet project requirements to satisfaction of Authority Having Jurisdiction.
Primer: PG100 or ASTM D41
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self-adhered.
Underlayrrent: Polystick TU P, Polystick TU Plus, Polystick TU Max, Tile Pro, Polyflex SAP, Polyflex SAP FR, Mule-Hide SA-APP Cap
Sheet and Mule-Hide SA-APP Cap Sheet (FR), self-adhered.
#6 Maximum DesiPn Pressure = -622.5 Ds#:
Deck: Structural concrete to meet project requirements to satisfaction of Authority Having Jurisdiction,
Primer: PG100 or ASTM D41
Underlayrrent: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch -applied.
#7 Maximum Deslpn Pressure _=_-30.0 psf*:
Deck: Min. 15/32 -Inch OSB to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: 11 ga. x 1.25 -Inch long x 1 -Inch head diameter round metal cap nails
Spacing: 6 -Inch o,c. at the 3 -Inch wide side laps and 6 -Inch o,c. at two (2) equally spaced staggered center rows.
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayrr ent: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA -APP Cap Sheet and
Mule -Hide SA -APP Cap Sheet (FR), self -adhered.
NEMO ETC, U.C. Evaluation Report P12060.02.09 -R24
Certificate of Authorltatlon #32455 6TH EDITION (2017) FBC NON-HVHZ EVALUATION FLSZS9-R28
Polyglass Roof Underlayments; (954) 233-1230 Revision 24: 01/24/2018
Page 7 of 14
ONEMOletc.
#8 Maximum Design Pressure = -37.5_psf*:
Deck: Min. 15/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheer: Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: 11 ga. x 1.25 -inch long x 1 -inch head diameter round metal cap nails
Spacing: 6 -Inch o.c. at the 3 -Inch wide side laps and 6 -Inch o.c. at two (2) equally spaced staggered center rows.
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA -APP Cap Sheet and
Mule -Hide SA -APP Cap Sheet (FR), self -adhered.
49 _Maximum Design Pressure = -37.5 psf*:
Deck: Min, 19/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: One (1) or two (2) layers ASTM D226, Type II felt
Fasteners: 11 ga. x 1.25 -inch long x 1 -Inch head diameter round metal cap nails
Spacing: 6 -Inch o.c, at the 3 -Inch wide side laps and 12 -Inch o.c. at two (2) equally spaced staggered center rows.
Underlayment: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt.
#SO Maximum Design Pressure = -45 Dsf*:
Deck: Min. 19/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: One (1) layer ASTM D226, Type 11 felt
Fasteners: 11 ga. x 1.25 -inch x 3/8 -inch head diameter annular ring shank roofing nails at 1 -5/8 -Inch diameter tin caps
Spacing: 4 -inch o.c, at the 2 -Inch wide side laps and 4 -inch o.c. at two (2) equally spaced staggered center rows.
Base Ply: (Optional; for use with self -adhering underlayment only) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayment: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA -APP Cap Sheet and
Mule -Hide SA -APP Cap Sheet (FR), self -adhered or Elastoflex G TU, applied in full mopping of hot asphalt.
#11 Max1murn Design Pressure = -45 psf":
Deck: Min. 19/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Two (2) layers ASTM D226, Type II felt
Fasteners: 11 ga. x 1.25 -Inch long x 3/8 -Inch head diameter annular ring shank roofing nails at 1 -5/8 -inch diameter tin caps
Spacing: 9 -Inch o.c. at the 2 -Inch wide side laps and 9 -Inch o.c. at two (2) equally spaced staggered center rows,
Base Ply: (Optional; for use with self -adhering underlayment only) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayrrent: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA -APP Cap Sheet and
Mule -Hide SA -APP Cap Sheet (FR), self -adhered or Elastoflex G TU or Elastoflex S6 G, applied in full mopping of hot
asphalt.
#12 Maximum Design Pressure = -45 12s#:
Deck: Min, 15/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -flim surface for torch -applied cap)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 9 -Inch o.c. at the 2 -Inch wide side laps and 18 -Inch o,c, at two (2) equally spaced staggered center rows.
Underlayrr ent: Elastoflex G TU or Elastoflex 56 G, applied In full mopping of hot asphalt or Polyflex G, torch -applied.
#13 Maximum DesIgn Pressure = -52.5 sf:
Deck: Min. 15/32 -inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 9 -inch o.c. at the 2 -Inch wide side laps and 12 -inch o.c. at two (2) equally spaced staggered center rows.
Underlayrrent: Elastoflex G TU or Elastoflex S6 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
#14 Maximum Deslgn_Pressu_re = -52,5 psf:
Deck: Min, 15/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nall Base (poly -film top surface)
Fasteners: Simplex Original Cap Nails
Spacing: 6 -inch o.c. at the 3 -Inch wide side laps and 6 -Inch o.c. at four (4) equally spaced staggered center rows.
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayrrent: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA -APP Cap Sheet and
Mule -Hide SA -APP Cap Sheet (FR), self -adhered.
NEMO ETC, LLC. Evaluation Report P12060.02.09 -R24
Certificate of Authorization #324.55 6TH EDITION (2017) FBC NON-HVHZ EVALUATION FL5259-R28
Palyglass Roof Underlayments; (954) 233.1230 Revision 24: 01/24/2018
Page 8 of 14
ONEMOJetc.
#15 Maximo Design Pressure=-52.5psf:
Deck: Min. 15/32 -inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheer: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: Simplex Original Cap Nails
Spacing: 6 -Inch o.c. at the 3 -Inch wide side laps and 6 -Inch o.c. at four (4) equally spaced staggered center rows.
Underlayment: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch-applled.
#16 Maximum Design Pressure _60 p0:
Deck: Min. 19/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Shee-: Elastobase (sanded top surface for hot -asphalt or torch-applled cap or poly -film surface for torch -applied cap)
Fasteners: 11 ga. x 1.25 -inch long x 3/8 -inch head diameter annular ring shank roofing nails at 1 -5/8 -Inch diameter tin caps
Spacing: 8 -Inch o.c. at the 4 -inch wide side laps and 8 -inch o.c. at three (3) equally spaced staggered center rows,
Underlayment: Elastoflex G TU or Elastoflex 56 G, applied in full mopping of hot asphalt or Polyflex G, torch -applied.
#17 Maximum Design Pressure = -60 psf:
Deck: Min. 19/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheer: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: OMG #12 Standard Roofgrlp with OMG Flat Bottom Metal Plates
Spacing: 12 -Inch o.c. at the 4 -Inch wide side laps and 12 -Inch o.c. at two (2) equally spaced staggered center rows.
Underlayment: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch-applled.
#18 Maximum Design Pressure = -67.5psf:
Deck: Min. 15/32 -inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Shee-: Polyglass G2 Base or Polyglass APP Base (requires use of torch -applied underlayment)
Fasteners: 12 ga. x 1.25 -inch long x 3/8 -Inch head diameter annular ring shank roofing nails at 1 -5/8 -Inch diameter tin caps
Spacing: 8 -Inch o.c. at the 4 -Inch wide side laps and 8 -Inch o.c. at four (4) equally spaced staggered center rows.
Underlayment: Elastoflex G TU or Elastoflex S6 G, applied in full mopping of hot asphalt or torch-applled or Polyflex G, torch -
applied.
419 Maximum Design Pressure = -75 sf:
Deck: Min. 15/32 -inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheer: Polyglass G2 Base or Polyglass APP Base (requires use oftorch-applied underloyment)
Fasteners: Dekfast #14 with Dekfast Hex plates, OMG #14 HD with OMG 3" Galvalume Steel Plates, OMG Roofgrlp 414 with
OMG Flat Bottom Plates (AccuTrac), Trufast HD with Trufast 3 -Inch Insulation Plates or Simplex MARX Cap
Fasteners
Spacing: 10 -Inch o.c. at the 4 -Inch wide side laps and 10 -Inch o.c. at three (3) equally spaced staggered center rows.
Underlayment: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt or torch-applled or Polyflex G, torch -
applied.
#20 Maximum Design Pressure = -90 nsf:
Deck:
Min. 15/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet:
Elastobase (sanded top surface for hot -asphalt or torch-applled cap or poly-fllm surface for torch-applled cap)
Fasteners:
Simplex MARX Cap Fasteners
Spacing:
6 -inch o.c. at the 2 -inch wide side laps and 6 -inch o.c. at two (2) equally spaced staggered center rows.
Underlayment: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch-applled.
#21 MaxlmuiTt
Design Pressure = -90 psf:
Deck:
Min. 15/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet:
Elastobase (sanded top surface for hot -asphalt or torch-applled cap or poly -flim surface for torch-applled cap)
Fasteners:
CMG #12 Standard Roofgrip or OMG #14 Heavy Duty with OMG 3" Round Metal Plates or OMG Flat Bottom Metal
Plates
Spacing:
6 -Inch o.c, at the 4 -Inch wide side laps and 6 -Inch o.c. at three (3) equally spaced staggered center rows,
Underlayment: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch -applied.
422 Maxim urn
Design Pressure = -90 psf:
Deck:
Min. 15/32 -inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet:
Elastobase (sanded top surface)
Fasteners:
Trufast #12 DP or Trufast #14 HD with Trufast 3" Metal Insulation Plates
Spacing:
6 -Inch o.c, at the 4 -Inch wide side laps and 6 -Inch o.c. at three (3) equally spaced staggered center rows.
Underlayment: Elastoflex G TU or Elastoflex S6 G, applied in full mopping of hot asphalt,
NEMO ETC, U.C. Evaluation Report P12060.02.09 -R24
Certlfcate of Authorization #31435 6' EDITION (2017) FBC NON-HVHZ EVALUATION FL5259-R28
Polyglass Roof Underlayments; (954) 233-1230 Revision 24: 01/24/2018
Page 9 of 14
ONEMOletc.
#23 Maximuni. Design Press = -90 Psf:
Deck: Mln.15/32-Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Polyglass G2 Base or Polyglass APP Base (requires use of torch -applied underlayment)
Fasteners: Dekfast #14 with Dekfast Hex plates, OMG #14 HD with OMG 3" Galvalume Steel Plates, OMG Roofgrip #14 with
OMG Flat Bottom Plates (AccuTrac), Trufast HD with Trufast 3 -Inch Insulation Plates or Simplex MAXX Cap
Fasteners
Spacing: 9 -Inch o.c. at the 4 -Inch wide side laps and 9 -inch o,c. at four (4) equally spaced staggered center rows.
Underlayrrent: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt or torch -applied or Polyflex G, torch -
applied.
#24 Maximum Desi n Pressure = -97.5 sf:
Deck: Min. 19/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: 11 ga. x 1.25 -Inch x 3/8 -Inch head diameter annular ring shank roofing nails at 1 -5/8 -inch diameter tln caps
Spacing: 4 -Inch o.c. at the 4 -Inch wide side laps and 4 -Inch o.c. at four (4) equally spaced staggered center rows.
Base Ply: (Optional) Polystick MTS or Polystick MTS PLUS, self -adhered.
Underlayrrent: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA -APP Cap Sheet and
Mule -Hide SA -APP Cap Sheet (FR), self -adhered.
#25 Maximum Design Pressure = -105 Dsf:
Deck: Min. 15/32 -inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: Simplex MAXX Cap Fasteners
Spacing: 6 -Inch o.c. at the 2 -inch wide side laps and 6 -Inch o.c. at three (3) equally spaced staggered center rows.
Underlayrr ent: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch -applied,
#26 -Maximum Design Pressure = -112.5 psf:
Deck: Min. 19/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase or Mule -Hide Nail Base (poly -film top surface)
Fasteners: 11 ga. x 1.25 -Inch x 3/8 -inch head diameter annular ring shank roofing nails at 1 -5/8 -Inch diameter tln caps
Spacing: 6 -Inch o.c. at the 4 -Inch wide side laps and 6 -Inch o.c. at four (4) equally spaced staggered center rows.
Primer: PG100 or ASTM D41 primer at all tin -caps
Base Ply: Polystick MTS or Polystick MTS PLUS, self -adhered
Underlayrr ent: Polystick TU P, Polystick TU Plus, Polystick TU Max, Polyflex SAP, Polyflex SAP FR, Mule -Hide SA -APP Cap Sheet and
Mule -Hide SA -APP Cap Sheet (FR), self -adhered.
#27 Max+mum DesiRn Pressure = -120 psf:
Deck: Min. 15/32 -Inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface for hot -asphalt or torch -applied cap or poly -film surface for torch -applied cap)
Fasteners: OMG #12 Standard Roofgrlp or OMG #14 Heavy Duty with OMG 3" Round Metal Plates or OMG Flat Bottom Metal
Plates
Spacing: 6 -inch o.c. at the 4 -Inch wide side laps and 6 -Inch o,c. at five (5) equally spaced staggered center rows.
Underlayrrent: Elastoflex G TU or Elastoflex S6 G, applied In full mopping of hot asphalt or Polyflex G, torch -applied.
#28 _Maximum Design Pressure = 420 psf:
Deck: Min. 15/32 -inch plywood to meet project requirements to satisfaction of Authority Having Jurisdiction.
Base Sheet: Elastobase (sanded top surface)
Fasteners: Trufast #12 DP or Trufast #14 HD with Trufast 3" Metal Insulation Plates
Spacing: 6 -Inch o.c. at the 4 -inch wide side laps and 6 -Inch o.c. at five (5) equally spaced staggered center rows.
Underlayrrent: Elastoflex G TU or Elastoflex S6 G, applied in full mopping of hot asphalt.
5.6.4.1 All other direct -deck, adhered Polyglass underlayment systems beneath foam -on the systems carry a Maximum
Design Pressure of -45 psf.
NEMO ETC, LLC. Evaluation Report P12060,02.09 -R24
Certificate of Authorization #32435 67H EDITION (2017) FBC NON-HVHZ EVALUATION FL5259-R28
Polyglass Roof Underlayments; (954) 233-1230 Revision 24:01/24/2018
Page 10 of 14
ONEMO I etc.
5.6.4.2 For mechanically attached Base Sheet, the maximum design pressure for the selected assembly shall meet or exceed
that required under FRSA/TRI April 2012 (04-12), Appendix A, Table 1A.
Alternatively, the maximum design pressure for the selected assembly shall meet or exceed the Zone 1 design
pressure determined in accordance with FBC 1609. In this case, Zones 2 and 3 shall employ an attachment density
designed by a qualified design professional to resist the elevated pressure criteria. Commonly used methods are
ANSI/SPRI WD1, FM Loss Prevention Data Sheet 1-29 and Roofing Application Standard RAS 117. Assemblies marked
with an asterisk* carry the limitations set forth in Section 2.2.10.1 of FM Loss Prevention Data Sheet 1-29 (January
2016) for Zone 2/3 enhancements.
5.7 Exposure Limitations:
Elastobase, Elastobase P, Polyglass G2 Base or Polyglass APP Base shall not be left exposed for longer than 30 -days
after installation.
Polystick IR -Xe or Polystick MU -X shall not be left exposed for longer than 90 -days after installation.
Polystick MTS, MTS PLUS, TU P, TU Plus, TU Max, Dual Pro, Tile Pro or Elastoflex G TU shall not be left exposed for
longer than 180 -days after installation.
Polyflex SAP or SAP FR, or Mule -Hide SA -APP Cap Sheet or SA -APP Cap Sheet (FR) does not have an exposure
limitation, unless the prepared roof covering is to be adhesive -set tile, in which case the maximum exposure is 30
days.
Elastoflex S6 G or Elastoflex 56 G FR or Polyflex G or Polyflex G FR does not have an exposure limitation, unless the
prepared roof covering Is to be adhesive -set tile (Elastoflex S6 G or Polyflex G only), in which case the maximum
exposure is 180 days.
5.8 Polystick MU -X has been found through comparative testing to have a lesser coefficient of friction than ASTM D226
roofing felt In a dry condition, tested at standard laboratory conditions. Agreement between purchaser and seller, as
set forth in Section 4.3, Note 1 of ASTM D1970-15, should be established as to slip resistance.
5.9 Tile Slippage Limitations (FRSA/TRI Aprll 2012 (04-12)):
When loading roof tiles on the underiayment in direct -deck the assemblies, the maximum roof slope shall be as
follows. These slope limitations can only be exceeded by using battens during loading of the roof tiles.
TABLE 2: TILE SLIPPAGE LIMITATIONS FOR DIRECT -DECK TILE INSTALLATIONS
Underlayment
Elastoflex G TU
Elastoflex S6 G or S6 G FR
Tile Profile
Staging Method Maximum Slope
Flat
10 -tile stack 7:12
Lugged
8 -tile stack (6 over 2) 6;12
Flat or Lugged
6-tlle stack (4 over 2) 4;12
Polystick MTS or MTS PLUS
Flat
6 -tile stack (4 over 2) 5;12
Lugged
6 -tile stack (4 over 2) 4:12
Polystick Tile Pro
Flat or Lugged
6 -tile stack (4 over 2) 7:12
Polystick TU Max
Flat
6 -tile stack (4 over 2) or 10 -tile stack 7:12
Lugged
6-tlle stack (4 over 2) 7;12
Lugged
10 -tile stack 6:12
Polystick TU P
Flat
6-tlle stack (4 over 2) 6:12
Lugged
6-tlle stack (4 over 2) 4:12
Polystick TU Plus
Flat or Lugged
6 -tile stack (4 over 2) 7:12
Flat or Lugged
10 -tile stack 6:12
Polyflex G or G FR
Flat or Lugged
6 -tile stack (4 over 2) 4:12
Polyflex SA P or SA P FR
Flat or Lugged
6 -tile stack (4 over 2) 4:12
NEMO ETC, LLC. Evaluation Report P12060,02.09 -R24
Certificate of Authorization x32455 6'H EDITION (2017) FBC NON-HVHZ EVALUATION FL5259-1128
Polyglass Roof Underlayments; (954)133-1230 Revision 24: 01/24/2018
Page 11 of 14
ONEMOJetc.
INSTALLATION:
6.1 Polyglass Roof Underlayments shall be installed in accordance with Polyglass published installation requirements
subject to the Limitations set forth in Section 5 herein and the specifics noted below.
6.2 Re -fasten any loose decking panels, and check for protruding nail heads. Sweep the substrate thoroughly to remove
any dust and debris prior to application, and prime the substrate (if applicable).
6.3 Elastobase, Elastobase P or Mule -Hide Nall Base:
6.3.1 Non -Tile Roallcatlons:
Shall be installed in compliance with the codified requirements for ASTM D226, Type II underlayment in FBC Table
1507.1.1 for the type of prepared roof covering to be installed.
Elastobase, Elastobase P or Mule -Hide Nail Base may be covered with a layer of Polystick, Polyflex SAP, Polyflex SA
P FR, Mule -Hide SA -APP Cap Sheet or SA -APP Cap Sheet (FR), self -adhered, Elastoflex G TU, Elastoflex S6 G or
Elastoflex S6 G FR In hot asphalt or Polyflex G or Polyflex G FR, torch applied. Roof cover limitations are those are
those associated with the top -layer underlayment, as set forth in Table 1.
6.3.2 Tile A Ilcations:
Elastobase, Elastobase P or Mule -Hide Nail Base are limited to use as a mechanically attached base sheet in the "Two
Ply System" from FRSA/TRI April 2012 (04-12). Reference is made to Table 1 and Section 5.6.4 herein, coupled with
FRSA/TRI April 2012 (04-12) Installation Manual.
6.4 Polystick MTS, MTS PLUS, IR -Xe, TU' P, TU PIUS„ TU Mex,MualPro, Tile Pro or MU -X or Polyflex SAP, Polyflex SAP FR,
Mule -Hide SA -APP Cap Sheet or Mule -Hide SA -APP Cap Sheet (FR):
6.4.1 Shall be Installed In compliance with the codified requirements for ASTM D1970 (except Polystick TU P) underlayment
In FBC Table 1507.1,1 for the type of prepared roof covering to be installed.
6.4.2
Direct -to -Deck with Mechanically Fastened Roof Covers:
All self -adhering materials, with the exception of Polystick TU Plus, Polyflex SAP or SAP FR and Mule -Hide SA -APP
Cap Sheet or SA -APP Cap Sheet (FR) should be back -nailed In selvage edge seam in accordance with Polyglass / Mule -
Hide back nailing guidelines. Nalls shall be corrosion resistant, 11 gauge ring -shank type with a minimum 1 -inch
diameter metal disk or Simplex -type metal cap nail, at a minimum rate of 12" o.c. Polystick TU Plus should be back -
nailed using the above noted fasteners and spacing, In area marked "nail area, area para clavar" on the face of
membrane. The head lap membrane is to cover the area being back -nailed.
All seal -lap seams (selvage laps) must be
firmly rolled with a minimum 28 Ib. hand
roller to ensure full contact and adhesion.
for Dual Pro and Tile Pro, align 'the edge of
the top sheet to the end of the glue pattern
(the sheet will overlap the fabric),
View of ovelap Seam of Dual Pro and Tile Pro
All over -fabric and over -granule end -laps shall have a 6 -Inch wide, uniform layer of Polyplus 50 Premium Modified
Wet/Dry Cement or Polyglass PG500 Modified Cement applied In between the application of the lap.
Polystick TU Plus, Dual Pro and Tile Pro may not be used In any exposed application such as crickets, exposed valleys,
or exposed roof to wall details
NEMO ETC, I.I.C. Evaluation Report P12060.02.09 -R24
certificate of Authorization #32455 6'" EDITION (2017) FBC NON-HVH2 EVALUATION FLSZS9-R28
Polyglass Roof Underlayments; 1954) 233-1230 Revlslon 24:01/24/2018
Page 12 of 14
*NEMOletc.
Repair of Polystick membranes Is to be accomplished by applying Polyplus 50 Premium Modified Wet/Dry Cement or
Polyglass PG500 Modified Cement to the area in need of repair, followed by a minimum 6 x 6 inch patch of the
Polystick material of like kind, set and hand rolled In place over the repair area. Patch laps, if needed, shall be
installed In a water shedding manner.
All Polystick membranes shall be Installed to ensure full contact with approved substrates. Polyglass requires a
minimum of 40-Ib weighted-roller or, on steep slopes, use of a stiff broom with approximately 40-lbs of load applied
for the field membrane. Hand rollers are acceptable for rolling of patches, laps (min. 28 Ib roller) or small areas of the
roof that are not accessible to a large roller or broom.
6.4.3 Tiie Applications t'rrot allowed for Polystick Dual Pro. fR-Xe or PD!Zsiick MU -X);
Reference is made to FRSA/TRI April 2012 (04-12) Installation Manual and Table 1 herein, using the Instructions
noted above as a guideline.
For mechanically fastened tile roofing over 2 -ply system, consisting of Base Sheet and self -adhering top sheet(s), Base
Sheet fastening shall be not less than FRSA/TRI April 2012 (04-12), Table 1.
For adhesive -set tile applications, refer to Section 5.6.4 herein.
6.4.4 Two 2 Ny Underla went Systems:
Polystick MTS or MTS PLUS followed by Polystick MTS, MTS PLUS, TU P, TU Plus, TU Max, Tile Pro, MU -X or Polyflex
SAP is allowable for use under mechanically attached prepared roof systems. Limits of use are those associated with
the top -layer material. This is not a requirement, but is allowable if a 2 -ply underlayment system is desired.
Polystick MTS or MTS PLUS followed by Polystick TU P, TU Plus, TU Max, Tile Pro or Polyflex SAP Is allowable for use
under foam -on tile systems. Limits of use are those associated with the top -layer material. This is not a requirement,
but is allowable if a 2 -ply underlayment system Is desired.
6;S Elastoflex G TU, Elastoflex 56 G or Elastoflex S6 G FR:
6.5.1 Elastoflex G TU, Elastoflex S6 G or Elastoflex S6 G FR shall be installed In compliance with current Polyglass published
Installation requirements. For use in tile applications:
✓ Elastoflex G TU is for use as an alternate to "Mineral Surface Roll Roofing" (ASTM D6380, Class M) in the "Single
Ply System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened tile roof systems or the Hot Asphalt
applied "Cap Sheet" in the "Two Ply System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened or
adhered the roof systems.
✓ Elastoflex S6 G is for use as an alternate to "Mineral Surface Roll Roofing" (ASTM D6380, Class M) In the "Single Ply
System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened the roof systems or the Hot Asphalt
applied "Cap Sheet" In the "Two Ply System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened or
adhered tile roof systems.
✓ Elastoflex S6 G FR is for use as an alternate to "Mineral Surface Rall Roofing" (ASTM D6380, Class M) in the "Single
Ply System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened tile roof systems or the Hot Asphalt
applied "Cap Sheet" in the "Two Ply System" from FRSA/TRI April 2012 (04-12) beneath mechanically fastened tile
roof systems.
6.5.2 For hot -asphalt -applications, Elastoflex G TU, Elastoflex S6 G or Elastoflex S6 G FR shall be fully asphalt-applled to the
substrates noted in Section 5.6. Side laps shall be minimum 3 -inch and end -laps minimum 6 -inch wide, off -set
minimum 3 feet from course to course. Side and end laps shall be fully adhered in a complete mopping of hot asphalt
with asphalt extending approximately 3/8 -inch beyond the lap edge.
6.6 Polyflex G or Polyflex G FR:
6.6.1 Polyflex G or Polyflex G FR shall be installed in compliance with current Polyglass published installation requirements.
For use in tile applications:
✓ Polyflex G is for use as an alternate to the Heat Applied "Cap Sheet" in the "Two Ply System" from FRSA/TRI April
2012 (04-12) beneath mechanically fastened or adhered tile roof systems (Base Sheet Limited per 5.6,3).
✓ Polyflex G FR Is for use as an alternate to the Heat Applied "Cap Sheet" in the "Two Ply System" from FRSA/TRI
April 2012 (04-12) beneath mechanically fastened tile roof systems (Base Sheet Limited per 5,6.3).
NEMO ETC, U.C. Evaluatlon Report P12060.02.09 -R24
Certificate of Authorization #32455 6T" EDITION 12017) FOC NON-HVH2 EVALUATION FL5259-R28
Polyglass Roof Underlayments;19S4) 233,1230 Revision 24; 01/24/2018
Page 13 of 14
ONEMO I etc.
6.6.2 Polyflex G or Polyflex G FR shall be fully torch -applied to the substrates noted in Section S.G. Side laps shall be
minimum 3 -inch and end -laps minimum 6 -inch wide, off -set minimum 3 feet from course to course. Side and end
laps shall be fully heat -welded and inspected to ensure minimum 3/8 -inch flow of modified compound beyond the lap
edge.
6.7 Tile Staging:
6.7.1 Tile shall be loaded and staged in a manner that prevents tile slippage and/or damage to the underlayment. Refer to
Table 2 herein, and Polyglass published requirements for tile staging.
6.7.2 Battens and/or Counter -battens, as required by the tile manufacturer and FRSA/TRI April 2012 (04-12) must be used
on all roof slopes greater than 7:12. Precautions should be taken as needed, such as the use of battens or nail -
boards, to prevent tile sliding and/or damage to the underlayment during the loading process.
6.7.3 Polyglass specifies the minimum cure time after Installation of self -adhering membranes and before loading of
roofing tiles Is forty-elght (48) hours.
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of this product.
8. MANUFACTURING PLANTS:
Contact the noted QA agency for Information on product locations covered for F.A.C. 61G20-3 QA requirements, The following
plants have qualified products under their respective physical properties specifications.
Plant
S eclfltation
Productfsl
Fernley, NV, Hazleton, PA & Winter Haven, FL
ASTM D1970
Polystick MU -X
Hazleton, PA
M -D 13.0004
Elastoflex G TU
ASTM D1970
Polystick IR -Xe
Hazleton, PA & Winter Haven, FL
ASTM D1970 & FRSA/TRI April 2012
Polystick TU Plus
ASTM D1970 & FRSA/TRI April 2012
Polystick TU Max
Tuscaloosa, AL
ASTM D4601, Tvpe II
Polyglass G2 Base
ASTM D226 (physicals)
Elastobase, Elastobase P
ASTM D6509
Polyglass APP Base
FRSA/TRI April 2012
Polystick MTS, Polystick MTS PLUS
FRSA/TRI April 2012
Polystick TU P
Winter Haven, FL
FRSA/TRI April 2012
Polyflex SAP, Polyflex SA P FR
ASTM D1970
Polystick Dual Pro
ASTM D1970 & FRSA/TRI April 2012
Polystick Tile Pro
ASTM D6164
Elastoflex S6, Elastoflex 56 G FR
ASTM D6222
Polvflex G. Polyflex G FR
9. QUALITY ASSURANCE ENTITY:
UL, LLC — QUA9625; (314) 578-3406; k.chancellor@us.ul.com
- END OF EVALUATION REPORT -
NEMO ETC, LLC. Evaluation Report P12060.02.09 -R24
Certificate o/Authorization #32455 6' EDITION (2017) FBC NON•HVHZ EVALUATION FL5259-R28
Polyglass Roof Underlayments; (954) 233-1230 Revision 24; 01/24/2018
Page 14 of 14