HomeMy WebLinkAboutSS-300-TDS-2018SS 300 Series
Professional Grade Silicone Sealant Technical Product Data
BASIC USES & DESCRIPTION:SS 300 Series Silicone Sealant is a medium modulus silicone sealant
designed for roofing applications and various joint applications.
COLORS:
SS 300 Series Silicone Sealant is available in 3 standard colors:
u White – SS 301
u Tan – SS 302
u Light Gray – SS 303
(Custom colors may be available upon request at an additional charge)
PACKAGING:
SS 300 Series Silicone Sealant is available in 10.0 fl. oz. cartridges.
WEATHER RESTRICTIONS:
SS 300 Series Silicone Sealant should not be applied when
temperatures are below 20°F or above 120°F.
STORAGE AND SHELF LIFE:
SS 300 Series Silicone Sealant has a recommended shelf life of
12 months from date of manufacture when stored in unopened
containers and between 50°F and 80°F. Refer to product
packaging for manufacture date.
APPLICATION:
The surface must be clean, dry and free from oils and other
contaminants. A thorough wire brushing, grinding, sandblasting or
solvent cleaning may be required to expose clean, sound, virgin
surface. SS 300 Series is primerless on most common, nonporous
building substrates. Consult Progressive Materials, LLC for priming
recommendations on other materials.
In all cases, a sample should be tested and/or test joints should be
installed on the project to confirm suitability.
TYPICAL CURE RATE:
Cure rate at 77°F and 50% RH:
A. Tack-free time: 30 minutes to 1 hour
B. Through cure (3/8” depth): 6-12 hours
CAUTIONS & RECOMMENDATIONS:
SS 300 Series in neither tested nor represented as suitable for
medical or pharmaceutical uses. SS 300 Series is not
recommended for silicone structural glazing, application in
confined areas without proper ventilation, or joints under
constant water submersion.
LIMITED WARRANTY INFORMATIONPLEASE READ CAREFULLY:
The information herein is to assist customers in determining
whether this product is suitable for various applications. This
product is only intended for sale to industrial and commercial
customers. Customers assume full responsibility for quality
control, testing and determination of suitability of products for
its intended application or use. We warrant that our products will
meet our written specifications. We make no other warranty of
merchantability of fitness for a particular purpose. Our total liability
and customers’ excusive remedy for all proven claims is replacement
of nonconforming product and in no event shall we be liable for any
other damages, including without limitation to special, incidental,
punitive, or consequential damages.
SILICONEROOFINGSYSTEMS
Revision Date: February 18, 2014
PROGRESSIVE MATERIALS540 CENTRAL COURT • NEW ALBANY, IN 47150PHONE (812) 944-7803 FA X (812) 944-7804 WEB PMsilicone.com
TYPICAL PROPERTIES
Test Properties Value Test Procedure
Dynamic Joint Movement (%)±45 ASTM C-719
Elongation (%)600 ASTM D-412
Tensile Strenght (psi)140 ASTM D-412
Modulus, 100%
Elongation (psi)38 ASTM D-412
Hardness Shore A 25 ASTM C-661
Tack-Free Time (minutes)60 ASTMC-679
Service Temperature
Range (°F)-50 to +280 PM
Accelerated Weathering,
5000 hrs Pass ASTM C-793
VOC (g/L)<50 ASTM D-3960
Contact Progressive Materials for more detailed specifications on our roofing systems and to find a certified contractor near you.