HomeMy WebLinkAboutGardner - FL26581_R1_II_No. 30 ASTM GGI-207-02-01 ASTM D226 T2� _. 0 gem 0) �r/
Lgaawr__
_�00�
CONSTRUCTION MATERIALS
LABORATORY TEST RESULTS
TECHNOLOGIES
Report for: Gardner Gibson Attention: Matt Mullins
4146 E. 7t" Avenue
Tampa, FL 33605
Product Name(s): NO. 30 ASTM Manufacturer: Gardner Gibson
PRI -CMT Project No.: GGI-207-02-01 Source: Gardner Gibson
Date Received: January 31, 2018 Dates Tested: Feb. 26, 2018 — Mar. 5, 2018
Purpose: Evaluate NO. 30 ASTM for compliance with the physical properties of ASTM
D 226 Asphalt -Saturated Felt Used in Roofing and Waterproofing,
Type II.
Test Methods: Testing was completed as described in ASTM D 226-09: Standard
Specification for Asphalt -Saturated Organic Felt Used in Roofing and
Waterproofing. Test methods assigned or referenced include ASTM D 70:
Standard Test Method for Density of Semi -Solid Bituminous Materials
(Pycnometer Method); ASTM D 146: Standard Test Methods for Sampling and
Testing Bitumen -Saturated Felts and Woven Fabrics for Roofing and
Waterproofing; and ASTM D 6136: Standard Test Method for Kerosine
Number of Unsaturated (Dry) Felt by Vacuum Method.
Sampling: Product samples were provided by Gardner Gibson in Tampa, FL
GGI-207-02-04
The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of
stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced
except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility
nor makes a performance or warranty statement for this material or products and processes containing this material in connection
with this report.
PRI Construction Materials Technologies LLC 6412 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: materialstesting@pricmt.com WebSite: http://www.pricmt.com
Gardner Gibson
ASTM D 226 for
NO. 30 ASTM
Page 2 of 3
Results: ASTM D 226
Requirement
Property Test Method Result Type I Type 11
Physical Requirements
Breaking Strength (Ibf/in-width)
20 specimens; 1" x 6" x thickness;
ASTM D 146
Cond. 2h @ 73.4±3.6°F & 50±5%RH;
Test 73.4±3.6'F- Rate=2 i n/m i n
Longitudinal (with fiber grain)
69
>_ 30
>_ 40
Transverse (across fiber grain)
32
_> 15
>_ 20
Pliability [Pass/Fail]
10 specimens; 1" x 8" x thickness -,3
D 146
�/" radius
3/" radius
Cond. 10-15min in water @ 77±1.8°F;
Test 90° around 1/2" radius in 2s
Longitudinal (with fiber grain)
Pass
No Failures
No Failures
Transverse (across fiber grain)
Pass
No Failures
No Failures
Loss on Heating (weight %)
2 specimens; 12" x 6" x thickness;
ASTM D 146
1
<_ 4
<_ 4
Test Cond. 221±5°F for 5h±3min
Dimensions and Masses
Width of Roll (in)
ASTM D 146
36
36±1/4
36±1/4
Area, min (ft2)
ASTM D 146
217
432
216
Moisture at Point of Manufacture (%)
ASTM D 146
NT
<_ 4.3
<_ 4.1
As Received'
1.0
<_ 4.3
<_ 4.1
Net Mass of Saturated Felt (Ib/100ft2)
ASTM D 146
26
_> 11.5
>_ 26
Mass of Saturant (Ib/100ft2)
ASTM D 146
15.0
>_ 6.2
>_ 15.0
Mass Ratio of Saturant to Desaturated Felt
ASTM D 226
1.5
>_ 1.2
_> 1.5
Saturation Efficiency (%)
ASTM D 226
71
? 70
. . .
Mass of Desaturated Felt (Ib/100ft2)
ASTM D 146
10.0
? 5.2
_> 10.0
Ash (%)
ASTM D146
9.0
<_10.0
<_10.0
Continued on Following Page
GG I-207-02-04
The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of
stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced
except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility
nor makes a performance or warranty statement for this material or products and processes containing this material in connection
with this report.
PRI Construction Materials Technologies LLC 6412 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: materialstesting@pricmt.com WebSite: http://www.pricmt.com
Gardner Gibson
ASTM D 226 for
NO. 30 ASTM
Page 3 of 3
Note(s): 1- Moisture (As Received) was utilized in lieu of Moisture at Point of Manufacture;
NT- Not Tested;
NA- Not Applicable
Statement of Compliance:
The product was tested has demonstrated compliance with the physical requirements of Type II prescribed
in ASTM D 226-09: Standard Specification for Asphalt -Saturated Organic Felt Used in Roofing and
Waterproofing.
END OF REPORT
GGI-207-02-04
The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of
stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced
except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility
nor makes a performance or warranty statement for this material or products and processes containing this material in connection
with this report.
PRI Construction Materials Technologies LLC 6412 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: materialstesting@pricmt.com WebSite: http://www.pricmt.com
Signed:
Signed:
Jason immons
Duc T. Nguyen
Director
Florida Registered Professional Engineer
PE No.: 65034
Date:
Date.:_�t
Q
l 9
4 ^.�
�w� ams G E N
�a`,�� No 65434®� d-3
Report Issue History:spa
'ar. �,
Issue # Date Pages
Revision Description if applicablet "0 �o
��.�
Original 03/08/2018 3
NA o,so 4QJ��r
eel
1011�1 ?4�
END OF REPORT
GGI-207-02-04
The test results, opinions, or interpretations are based on the material supplied by the client. This report is for the exclusive use of
stated client. No reproduction or facsimile in any form can be made without the client's permission. This report shall not be reproduced
except in full without the written approval of this laboratory. PRI Construction Materials Technologies LLC assumes no responsibility
nor makes a performance or warranty statement for this material or products and processes containing this material in connection
with this report.
PRI Construction Materials Technologies LLC 6412 Badger Drive Tampa, FL 33610 Tel: 813-621-5777 Fax: 813-621-5840 e-mail: materialstesting@pricmt.com WebSite: http://www.pricmt.com