Loading...
HomeMy WebLinkAboutProduct Approval (2) Certificate of Authorization No.29824 CREEK 17520 Edinburgh Drive Tampa, FL 33647 TECHNICAL SERVICES, LLC (813)480-3421 EVALUATION REPORT FLORIDA BUILDING CODE,6T"EDITION(2017) Manufacturer: DREXEL METALS, INC. Issued September 14, 2017 1234 Gardiner Lane Louisville, KY 40213 (502)716-7143 www.drexmet.com Quality Assurance: UL LLC(QUA9625) SCOPE Category: Roofing Subcategory: Underlayments Code Sections: 1507.1.1, 1507.2.4 Properties: Physical properties REFERENCES fniL Report No. Standard Year TrinityJERD(TST6049) 041280.10.12 ASTM D 1970 2015a ICC-ES(EVL2396) ESR-2206 ASTM D 1970 2015a PRODUCT DESCRIPTION AND APPLICATION MetShield MetShield is a coated-polyolefin-composite film surfaced, self-adhered ASTM D 1970 underlayment for use on steep slope roofs. Deck Type: Solid or closely fitted plywood sheathing for new or existing construction. Plywood deck shall be installed in accordance with FBC requirements. Roof decks shall have no more than 1/e°gap at abutting joints. Min.slope: In accordance with FBC requirements Attachment method: Underlayment shall be attached in accordance with the FBC Table 1507.1.1 and manufacturer's installation instructions. Min. application temperature: 40°F. Contact the manufacturer when installing at temperatures below 40°F. Allowable roof coverings: Permitted to be used as prescribed in FBC Table 1507.1.1 with mechanically fastened roof coverings. DRX13004.2 FI-16342-R2 Page 1 of 2 This evaluation report is provided for State of Florida product approval under Rule 61G20-3. The manufacturer shall notify CREEK Technical Services, LLC of any product changes or quality assurance changes throughout the duration for which this report is valid. This evaluation report does not express nor imply warranty, installation, recommended use, or other product attributes that are not specifically addressed herein. a CD E E K DREXEL METALS,INC. [t MetShield TECHNICAL SERVICES, LLC LIMITATIONS 1) This evaluation report is not use in the HVHZ. 2) Fire Classification is not within the scope of this evaluation. 3) Wind uplift resistance in not within scope of this evaluation. 4) Installation of the evaluated product shall comply with this report,the FBC, and the manufacturer's published application instructions. Where discrepancies exist between these sources, the more restrictive and FBC compliant installation detail shall prevail. 5) Deck substrates shall be clean, dry, and free from any irregularities and debris. All fasteners in the deck shall be checked for protrusion and corrected prior to underlayment application. 6) MetShield may be used as described in other current FBC product approval documents. 7) MetShield shall not be used with adhered tile roof coverings nor installed over existing roof coverings. 8) MetShield shall be exposed on the roof deck for a maximum duration of 30 days. 9) All products listed in this report shall be manufactured under a quality assurance program in compliance with Rule 61 G20-3. COMPLIANCE STATEMENT The products evaluated herein by Zachary R. Priest, P.E. have demonstrated compliance with the Florida Building Code,6t'Edition(2017)as evidenced in the referenced documents submitted by the named manufacturer. 0%J11111,111111 ,<� RY R.•p 2 017.0 9.14 PG?PGE NSF/�S.'� No 740211 16.26.20 * = -04'00' :?3 STATE OF :41j p •, lV Zachary R. Priest, P.E. •:°( O R 1 p P ����� Florida Registration No.74021 Ss, > Organization No.ANE9641 _ONA CERTIFICATION OF INDEPENDENCE CREEK Technical Services, LLC does not have,nor will it acquire,a financial interest in any company manufacturing or distributing products under this evaluation. CREEK Technical Services,LLC is not owned,operated,or controlled by any company manufacturing or distributing products under this evaluation. Zachary R. Priest, P.E.does not have, nor will acquire, a financial interest in any company manufacturing or distributing products under this evaluation. Zachary R.Priest,P.E.does not have,nor will acquire,a financial interest in any other entity involved in the approval process of the product. END OF REPORT DRX13004.2 FL16342-R2 Page 2 of 2 This evaluation report is provided for State of Florida product approval under Rule 61 G20-3. The manufacturer shall notify CREEK Technical Services,LLC of any product changes or quality assurance changes throughout the duration for which this report is valid. This evaluation report does not express nor imply warranty, installation, recommended use,or other product attributes that are not specifically addressed herein.