HomeMy WebLinkAboutProduct Approval; Swinging Exterior Door AssembliesPtouIDA DepamM9rrt aP :.
Business & Professional Regulation�11„L`rrrfzo 1
OBP0. NOaEa0Wr O0pP. OBF0.01V1910N9 10"IAVOR-
Igc.nda
y r*Product Approval
l o ProdSER:uubllApp
Product Anomval Menu > Application Detail
MM FL #
Application Type
Code Version
Application Status
Comments
Archived
Product Manufacturer
Address/Phone/Email
Authorized Signature
Technical Representative
Address/Phone/Email
Quality Assurance Representative
Address/Phone/Email
Category
Subcategory
Compliance Method
Florida Engineer or Architect Name who developed
the Evaluation Report
Florida License
Quality Assurance Entity
Quality Assurance Contract Expiration Date
Validated By
Certificate of Independence
SHOP STAMP REVIEW
Review is for general compliance with the Constructlon Documents.
Responsibility for cortectness of dimensions, details, quantities and safety
during fabrication Iles solely with the contractor.
D4 No Exceptions Taken Reviewed By: Dawn Boggio-Korbelak
F1-20461-R3 ❑ Rejected:
Revision
2017 11/22/19 Warms'+
Approved
Al
Therma-Tru Corporation
118 Industrial Drive
Edgerton, OH 43517
(419) 298-1740
rlckw@mbidgconsultants.com
Vivian Wright
rickw@mbldgconsultants.com
Exterior Doors
Swinging Exterior Door Assemblies
Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
❑ Evaluation Report - Hardcopy Received
Lyndon F. Schmidt, P.E.
PE-43409
National Accreditation and Management Institute
12/31/2021
Ryan J. King, P.E.
[D Validation Checklist- Hardcopy Received
FL2D461 R3 COT (d) Certificate of Indeoendenc%pdf
Referenced Standard and Year (of Standard) Standard
101/I.5.2
ASTM E330
ASTM E331
TAS 202
Equivalence of Product Standards
Certified By
Sections from the Code
Year
1997
2002
2000
1994
Product Approval Method Method 1 Option D
Date
Submitted
12/13/2017
Date
Validated
12/13/2017
Date
Pending FBC Approval
12/21/2017
Date
Approved
02/13/2018
Date
Revised
10/09/2018
Summary of Products
Go to Page [—] 0
09Page I/200
FL #
Model, Number or Name
Description
20461.1
a. Therma-Tru Fiber -Classic and
Nominal 6'8 "Non -Impact" Opaque Composite Edge Fiberglass
Smooth -Star
Single Door(Inswing/Outswing; X configuration)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 11 (el Tnst 20461.I.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.1 for Design Pressure Ratings, any
FL20461 R3 AE (d) Eval 20461.I.odf
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
Particulars. (For Fiber -Classic and Smooth -Star doors, this
Product approval requires the use of"7" part numbers for
these doors, which have been stained or painted within six
months of Installation.
20461.2
It. Therma-Tru Fiber -Classic and
Nominal 5'8 "Non -Impact" Opaque Composite Edge Fiberglass
Smooth -Star
Single Door with Sldelite(s) (Inswing/Outswing; XO, OR or
OXO configurations)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 II (a) Inst 20461.2.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.2 for Design Pressure Ratings, any
FL20461 R3 AE (d) Eval 20461 2.odf
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of'0" part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.3
herma-Tm FlberClasslc and
Nominal 6'B "Non -Impact" Opaque Fiberglass Composite Edge
�cs-looth-Star
Double Door with or without Sidelites (Inswing/Outswing; XX
or OXXO configurations)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 It (a) Inst 20461.3.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.3 for Design Pressure Ratings, any
FL20461 R3 AE (d) Eval 20461.3.odf
additional use limitations, installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of'0" part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.4
d. Therma-Tru Fiber -Classic and
Smooth -Star
Nominal 7'0 "Non -Impact" Opaque Composite Edge Fiberglass
Single Door (Inswing/Outswing; X configuration)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 11 (e) Tnst 20461.4.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.4 for Design Pressure Ratings, any
FL20461 R3 AE W Eval 20461.4.odf
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of"? part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.5
e. Therma-Tm Fiber -Classic and
Nominal 7'0 "Non -Impact" Opaque Composite Edge Fiberglass
Smooth -Star
Single Door with Sidelite(s) (Inswing/Outswing; XO, OX or
ONO configurations)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
FL20461 R3 II (a) Inst 20461.5..odf
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.5 for Design Pressure Ratings, any
FL20461 R3 AE (dJ Eval 2D4615 odf
additional use limitations, Installation instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of "J" part numbers for
these doom, which have been stained or painted within six
months of Installation.)
20461.6
f. Therma-Tru Fiber -Classic and
Nominal 8'0 "Non -Impact" Opaque Composite Edge Fiberglass
Smooth -Star
Single Door (Inswing/Outswing; X configuration)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 II (e) Inst 20461.6.0f
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.6 for Design Pressure Ratings, any
FL20461 R3 AE (d) Eval 20461.6.odf
additional use limitations, Installation instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of 7' part numbers for
these doors, which have been stained or painted within six
months of installation.)
20461.7
g. Therma-Tru Fiber -Classic and
Nominal 8'0 "Non -Impact" Opaque Composite Edge Fiberglass
Smooth -Star
Single Door with Sidelite(s) (Inswing/Outswing; XO, OX or
ONO configurations)
Limits of Use
Installation Instructions
Approved for use In HVHZ: No
FL20461 R3 11 () Inst 20461 7 d
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.7 for Design Pressure Ratings, any
FL20461 R3 AE (d) Eva] 204617 odf
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of "J" part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.8
h. Therma-Tm Fiber -Classic and
Nominal 8'0 "Non -Impact" Opaque Composite Edge Fiberglass
Smooth -Star
Double Door with or without Sidelites (Inswing/Outswing; XX
or OXXO configurations)
Limits of Use
Installation Instructions
Approved for use In HVHZ: No
FL20461 R3 IT (a) Inst 20461.8.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.8 for Design Pressure Ratings, any
FL20461 R3 AE (dJ Eval 20461.8.odf
additional use limitations, installation instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of "T part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.9
I. Therma-Tru Fiber -Classic and
Nominal 6'8 "NDn-Impact" Glazed Composite Edge Fiberglass
Smooth -Star
Single Door (Inswing/Outswing; X configuration)
Limits of Use
Installation Instructions
Approved for use In HVHZ: No
FL20461 R3 II O Ins[ 20461 9 odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.9 for Design Pressure Ratings, any
FL20461 R3 AE M) Eval 204619 df
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber-Classlc and Smooth -Star doors, this
product approval requires the use of "J" part numbers for
these doors, which have been stained or painted within six
months of installation.)
20461.10
J. Therma-Tru Fiber -Classic and
Nominal 6'8 "Non -Impact" Glazed Composite Edge Fiberglass
Smooth -Star
Single Door with Sldelite(s) (Inswing/Outswing; XO, OX or
ONO configurations)
Limits of Use
Installation Instructions
Approved for use In HVHZ: No
FL20461 R3 II (e) Inst 20461 10.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.10 for Design Pressure Ratings, any
FL20461 R3 AE (dJ Eval 20461 10 df
additional use limitations, installation instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of'0" part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.11
k. Therma-Tru Fiber -Classic and
Nominal 6'8 "Non -Impact" Glazed Composite Edge Fiberglass
Smooth -Star
Double Door with or without Sidelites (Inswing/Outswing; XX
or OXXO configurations)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 II (e) Inst 20461.11.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant; No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.11 for Design Pressure Ratings, any
FL20461 R3 AE (d) Eval 20461.IS.odf
additional use limitations, installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Flber-Classic and Smooth -Star doors, this
product approval requires the use of"? part numbers for
these doors, which have been stained or painted within six
months of installation.)
20461.12
I. Therma-Tru Fiber -Classic and
Nominal TO "Non -Impact" Glazed Composite Edge Fiberglass
Smooth -Star
Single Door(Inswing/Outswing; X configuration)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 TI (e) Inst 20461.12.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.12 for Design Pressure Ratings, any
FL20461 R3 AE (d) Eval 20461.12.odf
additional use limitations, Installation Instructions and protluct
Created by Intlependent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doom, this
product approval. requires the use of"T' part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.13
m. Therma-Tru Fiber -Classic and
Nominal TO "Non -Impact" Glazed Composite Edge Fiberglass
Smooth -Star
Single Door with Sidelite(s) (Inswing/Outswing; XO, OX or
OXO configurations)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 II (e) Tnst 20461.13.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.13 for Design Pressure Ratings, any
FL20461 R3 AE (dl Eval 20461.13.odf
additional use limitations, Installation Instructions and product
Created by Intlependent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
protluct approval requires the use of "1" part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.14
n. Therma-Tru Fiber -Classic and
Smooth -Star
Nominal B'D "Non -Impact" Glazed Composite Edge Fiberglass
Single Door (Inswing/Outswing; X configuration)
Limits of Use
Installation Instructions
Approved far use in HVHZ: No
FL20461 R3 TT (e) Inst 20461.14.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.14 for Design Pressure Ratings, any
FI 20461 R3 AE (d) Eval 20461.14.odF
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of "T' part numbers for
these doom, which have been stained or painted within six
months of installation.)
20461.15
0. Therma-Tru Fiber -Classic and
Nominal 8'0 "Non -Impact" Glazed Composite Edge Fiberglass
Smooth -Star
Single Door with Sldellte(s) (Inswing/Outswing; XO, OX or
OXO configurations)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
Impact Resistant: No
FL20461 R3 11 (e) Inst 20461 15.odf
Verified By: Lyndon F. Schmidt, P.E. 43409
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.15 for Design Pressure Ratings, any
FL20461 R3 AE (d) Eval 2046115 od
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
protluct approval requires the use of"? part numbers for
these doors, which have been stained or painted within six
months of installation.)
20461.16
p. Therma-Tru Fiber -Classic and
SmoDth-Star
Nominal 8'0 "Non -Impact" Glazed Composite Edge Fiberglass
Double Door with or without Sidelites (Inswing/Outswing; XX
or OXXO confguratons)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 IT (a) Inst 20461 16 odf
Approved for use outside HVHZ: Yes
Impact Resistant: No
Verified By: Lyndon F. Schmidt, P.E. 43409
Created by Intlependent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.16 for Design Pressure Ratings, any
FI 20461 R3 AE (d) Eval 20461.16.odf
additional use limitations, Installation instructions and product
Created by Independent Third Party: Yes
particulars. (Far Fiber -Classic and Smooth -Star doors, this
Product approval requires the use of'7" part numbers for
these doors, which have been stained or painted within six
months of installation.)
20461.17
q. Therma-Tru Fiber -Classic and
Nominal 6'8 "Non -Impact" Opaque Composite Edge Fiberglass
Smooth -Star
Single Doorwith Transom (Inswing/Outswing; DIX
configuration)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 11 () Inst 20461 17 odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: See INST 20461.17 for Design Pressure Ratings, any
FL20461 R3 AE (it) Eval20461 17 oilf
additional use limitations, Installation instructions and product
Created by Independent Third Party: Yes
particulars. (For Flber-Classic and Smooth -Star doors, this
product approval requires the use of'7" part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.16
r. Thera— Fiber -Classic and
Nominal 5'8 "Non -Impact" Opaque Composite Edge Fiberglass
Smooth -Star
Single Door with Sldellte(s) and Transom (Inswing/Outswing;
0/XO, 0/OX or O/OXO configurations)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 II (e) Inst 20461.IB.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: INST 20461.18 for Design Pressure Ratings, any
FL20461 R3 AE (d) Eval 20461.18.0f
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of "P' part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.19
s. Therma-Tru Fiber -Classic and
Nominal 6'8 "Non -Impact" Opaque Composite Edge Fiberglass
Smooth -Star
Single Door with Sldelite(s) (Inswing/Outswing; XO, OX or
OXO Continuous Head and SIII configurations)
Limps of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 11 () Inst 20461 19 df
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: INST 20461.19 for Design Pressure Ratings, any
FLZD461 R3 AE (dl E al 20461 19 df
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of "3" part numbers for
these doors, which have been stained or painted within six
months of Installation.)
20461.20
herma-Tru Fiber -Classic and
Nominal BIT "Non -Impact" Opaque Composite Edge Fiberglass
ooth-Star
IIS
Single Door with Sldelitii (Inswing/Outswing; XO, OX or
ONO Continuous Head and SIII configurations)
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL20461 R3 If (e) Inst 20461.20.odf
Approved for use outside HVHZ: Yes
Verified By: Lyndon F. Schmidt, P.E. 43409
Impact Resistant: No
Created by Independent Third Party: Yes
Design Pressure: N/A
Evaluation Reports
Other: INST 20461.20 for Design Pressure Ratings, any
FL20461 R3 AE (d1 E al 20461 20 df
additional use limitations, Installation Instructions and product
Created by Independent Third Party: Yes
particulars. (For Fiber -Classic and Smooth -Star doors, this
product approval requires the use of "Y' part numbers for
these doors, which have been stained or painted within six
months of installation.)
Go to Page = 0
Back Next
®QPage l/2040
Contact Us :: 2601 Blo, Stone Road Tallahassee EL 32399 phone650-0117-1824
The Scale of Florltla is as WEEO employd, raovr oM1t 2002-2013 State of Florida.:: Prlvacv Statement:: AecuAblifty 5tamemen:: Refund Sturm¢
Under Florltla law, email addresses are public recces. If you do not want your e-mail address released in response to a public -records request, do not send elecimnlc
mall t4 this emlty. Instead, contact the mace by phone or by traditional mall. If you have any questions, please contact 850.487.1395. 'Pursuant to section 4S5.325(1),
Florltla Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have one. The ¢malls
provided may be used or official communlration with the seamen. However email addresses are public record. If you do not wish to supply a personal address, please
provide the Department with an email address which can be made available N the public. To determine if you are a licensee under Chapter 455, F.S., please dick here .
Product Approval Accepts:
®O ®ERM
Credit Card
Safe
R W R W Building Consultants, Inc.
B Consulting and Engineering Services for the Building Industry
C P.O. Box 230 Valrico, FL 33595 Phone 813.659.9197
Florida Board of Professional Engineers Certificate of Authorization No. 9813
Product
Category
Sub Category
Manufacturer
Product Name
Swinging
Therma-Tru Corporation
Fiber -Classic and Smooth-Star
Exterior
Exterior Door
118 Industrial Dr
Composite Edge Opaque Fiberglass Single Door
Doors
Assemblies
Edgerton, OH 43617
Inswing I outswing_
Phone 419-298-1740
"Non -Impact"
Scope: Product Evaluation report issued by R W Building Consultants, Inc. & Lyndon F. Schmidt, P.E. (System ID # 1998) for
Therma-Tru Corporations, based on Rule Chapter No. 61G20-3, Method 1D of the State of Florida Product Approval, Dept
of Business & Professional Regulation.
RW Building Consultants and Lyndon F. Schmidt, P.E. do not have nor will acquire financial interest in the company
manufacturing or distributing the product or in any other entity Involved In the approval process of the product named
herein.
Umltatfons:
1. This product has been evaluated and is in compliance with the 6th Edition (2017) Florida Building Code (FBC) structural requirements
excluding the "High Velocity Hurricane Zone" (HVHZ).
2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment to base material shall be beyond wall dressing
or stucco.
3. For 2x stud'framing construction. anchoring of these units shall be the same as that shown for 2x buck masonry construction.
4. Site conditions that deviate from the details of drawing FL-20461.1 require further engineering analysis by a licensed engineer or
registered architect.
5. Fiber -Classic & Smooth -Star Door panels require the use of "J" part numbers and must be stained or painted within six months of
Installation
6. See drawing FL-20461.1 for size and design pressure limitations.
Supporting Documents:
1. Test Report No.
TEL01460145
TEL01461573
2. Drawinq No.
No. FL-20461.1
3. Calculations
Anchoring
Test Standard
ASTM E330(02), ASTM E331(00)
ASTM E330-02 & ASTM E331-00
Prepared by
RW Building Consultants, Inc. (CA#9813)
Prepared by
RW Building Consultants, Inc. (CA 99813)
4. Quality Assurance
Certificate of Participation issued by National Accreditation &
Management Institute, certifying that Therma-Tru Corporations is
manufacturing products within a quality assurance program that
complies with ISOAEC 17020.and .Guide 53.
SHOPSTAMPREVIEW Wta/Plan
Review Is for general compliance with the Construction Documents.
Res onsibilhy for correctness of dimensions, details, quantities and safety
durPng fabrication lies solely with the contractor.
It NoUreptionsTaken Reviewed By: Dawn Boggio-Korbelak
0 Rejected:
11 /22/19 dla,�, $. Kerf,(g& L.
Sheet 1 of 1
Testing Laboratory Signed by
Testing Evaluation Lab.,lnc. V.K. Wright
Testing Evaluation Lab.,lnc. V.K. Wright
Signed & Sealed by
Lyndon F. Schmidt, P.E.
Signed & Sealed by
Lyndon'F. Schmidt, P.E.
Lyndon F. Schmidt, P.E.
FL PE No. 43409
12f/1'2017
Florida Building Code Online Page 1 of 6
ONE
r�
BCIS Home LoB to i User Regklmtlon Hot Tables Submit 5urcle,le State &F.. I Publications I eontatt us i 6ele Site Map Units) search i
Fndd`
Product Approval
SHOP STAMP REVIEW hip/plan Lelia
USER: Public Uses
Review isfor genercompliance With the Documents.
x
�
dimensions, details,
Responsibility for correctnesssolely With thcotadetails, quantities and safety
during fabrication Iles solely with the contractor.
Product Anma¢xl Heru> Product or Anoaranon
Search> Aonncston ust> ApVnratlen Pet
1111 No Exceptions Taken Reviewed By: Dawn BDggio-KOrbelak
FL
FL36546-Ril
❑ Rejected:
Application Type
Code Version
Revision
2017 11/22/19 0ai KmbdAL
Application Status
Approved
Comments
Archived
❑
Product Manufacturer
Clopay Building Products Company
Address/Phone/Email
8585 Duke Blvd.
Mason, OH 45040
(513) 770-6062
mwesterfleid@clopay. com
Authorized Signature
Scott Hamilton
shamilton@clopay.com
Technical Representative
Address/Phone/Email
Quality Assurance Representative
Address/Phone/Email
Category Exterior Doors
Subcategory Sectional Exterior Door Assemblies
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed
Florida Professional Engineer
Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed
Scott Hamilton
the Evaluation Report
Florida License
PE-63286
Quality Assurance Entity
Intertek Testing Services NA, Inc. - QA Entity
Quality Assurance Contract Expiration Date
12/31/2020
Validated By
Gary Pfuehler
U Validation Checklist - Hardcopy Received
Certificate of Independence FL16 46 R11 COI Certification of Independence of Validation Entity -
Gary Pfuehler 2016-02-49 2
FL16546 RIICOI tatement on Independence of Evaluation nti -
ScottHamiltun 2016-02-19.odf
Referenced Standard and year (of Standard) Standard Year
ANSI/DASMA 108 2005
ANSI/DASMA 115 2005
ASTM E1886 2005
ASTM E1996 2009
ASTM E330 2002
TAS 201 1994
TAS 202 1994
TAS 203 1994
Equivalence of Product Standards
Certified By Florida Licensed Professional Engineer or Architect
https://floridabuilding.org/pr/pr_app_dtl.aspx?param=wGEVXQwtDgvgqu2wP/`2bnFgU... 10/23/2019
Florida Building Code Online
Page 2 of 6
Sections from the Cade
Product Approval Method
Date Submitted
Date Validated
Date Pending FBC Approval
Date Approved
Summary of Products
Go to Page O 0
FL16546 Rll Eaulv 20170809 - FBC - DASMA 100 eauiv.odf
FL16546 1131 Eauiv 70170809 - FBC - DASMA 115 eouiv.ndf
Method 1 Option D
12/18/2018
02/13/2019
02/13/2019
04/16/2019
0 0 Page l/40 0
FIL Yf
Model, Number or Name
Description
16546.1
01 W5-16-HY PAN-2F153/6: 73,
Steel Pan (min. 25 ga.) Double -Car (9'2" to 16'0" wide)
1500, 75, 76, 190, 84A, 94, 42,
WINDCODE® W5 Garage Door
42B, 48, 48B, 55, 4F, 4RST, 6RST,
4RSF, 6RSF, GDSS, GD5SV, GRSS,
GR5SV, ARSS, ARSSV, EDSS,
EDSSV
Limits of Use
Installation Instructions
Approved for use In HVHZ: No
FL16546 R11 IT 101922-6-Revl5.odf
Approved for use outside HVHZ: Yes
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: Yes
Created by Independent Third Parry: No
Design Pressure: +32 PSF/-32 PSF
Evaluation Reports
Other: Solid doors (no glazing) or doors with optional
FL16546 R31 AE CBPC 131211-A.odf
impact -resistant glazing are Impact -resistant (large missile
Created by Independent Third Party: No
Impact).
16546.2
02 WS-16-HY PAN-2F153/6: 73,
Steel Pan (min. 25 ga.) Double -Car (97'to 16'0" wide)
1500, 75, 76, 190, B4A, 94, 42,
WINDCODE® W5 Garage Door
42B, 48, 48B, 55, 4F, 4RST, 6RST,
4RSF, 6RSF, GDSS, GD5SV, GRSS,
GRSSV, ARSS, ARSSV, EDSS,
EDSSV
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
Approved for use outside HVHZ: Yes
FL16546 RSS 11 101922-13-Revl5.odf
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: No
Created by Independent Third Party: No
Design Pressure: +32 PSF/-32 PSF
Evaluation Reports
Other: The standard glazing available for this product meets
FL16546 R11 AE CBPC 131211-6adf
the wind load requirements of the building code but DOES
Created by Independent Third Party: No
NOT meet the Impact resistant requirement for windborne
debris regions.
16546.3
03 WS-16 PAN-21`443: GD4S, GR4S,
Gallery/Artistry/Expressions: Steel Pan (min. 24 ga.) Double-
ED4S, AR4S
Car (9'2" to 16'2" wide) WINDCODE® WS Garage Door with
Optional Impact -Resistant Lites
Limits of Use
Installation Instructions
Approved for use in HVHZ: Yes
FL16546 R11 II 104791-RevO$ odf
Approved for use outside HVHZ: Yes
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: Yes
Created by Independent Third Party: No
Design Pressure: +46 PSF/-52 PSF
Evaluation Reports
Other: Max. Wind Speed (V_ult): 170 MPH. Solid doors (no
F1I6546 RSI AE CBPC 131211-A.odf
glazing) or doors with optional Impact -resistant glazing are
Created by Independent Third Party: No
Inn - sistant (large missileimpact).
16546.4
04 W6-16 PAN-21F353: 73, 1500,
Steel Pan (min. 25 ga.) Double -Car (9'2" to 16'2" wide)
75, 190, 84A, 94, 42, 42B, 48, 48B,
WINDCODE@ W6 Garage Door with Optional Impact-
55, 4RST, 6RST, 4RSF, 6RSF, GDSS,
Resistant Lites
GD5SV, GRSS, GR5SV, ARSS,
ARSSV, ED5S, EDSSV
Limits of Use
Installation Instructions
Approved for use in HVHZ: Yes
FL16546 1111 II 104710-A-Rev03 odf
Approved for use outside HVHZ: Yes
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: Yes
Created by Independent Third Party: No
Design Pressure: +36 PSF/-42 PSF
Evaluation Reports
Other: Max. Wind Speed (V_uit): 170 MPH. Solid doors (no
FL16546 R11 AE CBPC 131211-A odf
standard glazing) are Impact -resistant (large missile impact).
Created by Independent Third Party: No
16546.5
https://floridabuilding.org/prlpr_app_dtl.aspx?param=wGEVXQwtDgvgqu2w%2bnFgU... 10./23/2019
Florida Building Code Online
Page 3 of 6
05 W6-16 PAN-2F153: 73, 1500,
Steel Pan (min. 25 ga.) Double -Car (92" to 16'2" wide)
75, 190, 84A, 94, 42, 4B, 55, 4RST,
WINDCODE® W6 Garage Door
'611ST, 4RSF, 6RSF, GOES, GD5SV,
GRES, GR5SV, ARSS, AR5SV, ED5S,
`
ED5SV
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FI16546 RIt II 104710-8-Rev03.ndf
Approved for use outside HVHZ: Yes
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: No
Created by Independent Third Party: No
Design Pressure: +36 PSF/-42 PSF
Evaluation Reports
Other: The standard glazing available for this product meets
FL16546 R11 AE CBPC 131211-A odf
the wind lead requirements of the building code but DOES
Created by Independent Third Party: No
NOT meet the Impact resistant requirement for windborne
debris regions.
16546.6
06 W6-16 PAN-2F156: 76, 211ST
Steel Pan (min. 25 ga.) Double -Car (92" to 16'2" w ode)
WINDCODE® WE Garage Door
Limits of Use
Installation Instructions
Approved for use In HVHZ: Yes
FL16546 R11 II 104710-A-Ry03 odf
Approved for use outside HVHZ: Yes
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: Yes
Created by Independent Third Party: No
Design Pressure: +36 PSF/-42 PSF
Evaluation Reports
Other: Max. Wind Speed (V_ult): 170 MPH. Solid doors (no
standard glazing) are impact -resistant (large missile Impact).
FL16546 R11 AE CBPC 131211-A.odf
Created by Independent Third Party: No
16546.7 07 W6-16 PAN-2F156: 76, 2RST
Steel Pan (min. 25 ga.) Double -Car (92" to 162" wide)
WINDCODE® W6 Garage Door
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL16546 RII 11 104710-8-RevO3,pdf
Approved for use outside HVHZ: Yes
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: No
Created by Independent Third Party: No
Design Pressure: +36 PSF/-42 PSF
Evaluation Reports
Other: The standard glazing available for this product meets
FL16546 RII AE CBPC 131211-A odf
the wind load requirements of the building code but DOES
Created by Independent Third Party: No
NOT meet the Impact resistant requirement for windborne
debris regions.
16546.8
08 WS-16 PANSP-21`153/6: 73SP,
Steel Pan (min. 25 ga.) Double -Car (9'2" to 16'0" wide)
15SP, GDSSSP, GD5SSPV, 76SP,
WINDCODE(D WS Garage Door
76VSP
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL16546 RII II 104818-A-ftev0l-sI ned.odf
Approved for use outside HVHZ: Yes
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: Yes
Created by Independent Third Party: No
Design Pressure: +32 PSF/-37 PSF
Evaluation Reports
Other: Solid doors (no glazing) or doors with optional
FL16546 RII AE CBPC 131211-A odf
Impact -resistant glazing are Impact -resistant (large missile
Created by Independent Third Party: No
Impact).
16546.9
09 W5-16 PANSP-2F153/6: 73SP,
Steel Pan (min. 25 ga.) Double -Car (9'2" to 16'0" wide)
15SP, GD5SSP, GD5SSPV, 76SP,
WINOCODEB WS Garage Door
76VSP
Limits of Use
Installation Instructions
Approved for use in HVHZ: No
FL16546 R31 II 104818-11-Revu-signed.odf „
Approved for use outside HVHZ: Yes
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: No
Created by Independent Third Party: No '
Design Pressure: +32 PSF/-37 PSF
Evaluation Reports
Other: The standard glazing available for this product meets
FL16546 R11 AE CBPC 131211-A odf „
the wind load requirements of the building code but DOES
Created by Independent Third Party: No
NOT meet the Impact resistant requirement for windborne
debris regions.
16546.10
10 W6-09 DSIE-IA171: 2050, 2051,
Double -skin Insulated EPS (exterior skin 27 ga. min.; Interior
2053, 4050, 4051, 4053, 62, 64,
skin 29 ga. min.) Single -Car (up to 9'0" wide) WINDCODE®
65, 62G, 62LG, 64G, SDP38, SFL38,
W6 Garage Door
SRP3B, 134, 135, 136, 6130, 6131,
6133
Limits of Use
Installation Instructions
Approved for use in HVHZ: Yes
FL16546 R31 U 104814-A-ReV60.Ddf
Approved for use outside HVHZ: Yes
Verified By: Scott Hamilton FL PE 63286
Impact Resistant: Yes
Created by Independent Third Party: No
Design Pressure: +36 PSF/-44 PSF
Evaluation Reports
Other: Max. Wind Speed (V_ult): 170 MPH. Solid doors (no
F1.16546 R11 AF CBPC 131211-A.odf
glazing) are impact-resistant(large missile Impact).
Created by Independent Third Party: No
16546.11
11 W6-09 DSIE-1A171: 2050, 2051,
Double -skin Insulated EPS (exterior skin 27 ga. min.; Interior
2g53, 4050, 4051, 4053, 62, 64,
skin 29 ga. min.) Single -car (up to 9'0" wide) WINOCODE®
65, 62G, 62LG, 64G, SDP38, SFL3B,
W6 Garage Door
SRP38, 134, 135, 136, 6130, 6131,
6133
https://floridabuilding.org/prlpr_app_dtl.aspx?param=wGEVXQwtDgvgqu2w%2bnFgU... 10/23/2019