HomeMy WebLinkAboutEvaluation Report; Series 120, 130, 140 Aluminium SGDL. Roberto Lomas P.E.
1432 Woodford Rd.
Lewisville NC, 27023
434-688-0609
Rllomas@lrlomaspe.com
Manufacturer: MI Windows and Doors LLC
650 West Market Street
Gratz, PA 17030
Engineering Evaluation Report
Product Line: Series 120/1301140 Aluminum Sliding Glass Door - Non -Impact
Report No.: 513976
Compliance:
The above mentioned product has been evaluated for compliance with the requirements of the Florida Department of
Business and Professional Regulation for Statewide Acceptance per Rule 61 G20-3.005 method 1(a). The product listed
herein complies with requirements of the current Florida Building Code.
Supporting Technical Documentation:
1. Approval documents: drawing numbers 08-03087, prepared, signed and sealed by Luis Roberto Lomas P.E.
2. Report No.: 1223.03-106-12 signed and sealed by Michael D. Stremmel, P.E.
Molimo. LLC, York PA.
AAMANVDMA/CSA 101/I.S.2/A440-08
Design pressure: C55.13psf
Water penetration resistance: 3.76psf (standard sill)
Water penetration resistance: 8.36psf (2 5/8" sill extender)
Water penetration resistance: 9.82psf (3 1/2" sill extender)
3. Anchor calculations, report number 513976-1, prepared, signed and sealed by Luis Roberto Lomas P.E.
Limitations and Conditions of use:
• Maximum design pressure:
➢ +25.0/-55.Opsf (standard sill where water penetration resistance is required)
➢ t55.Opsf ( 2 5/8" and 3 1/2" sill extender where water penetration resistance is required)
➢ t55.Opsf (standard sill, 2 5/8" and 3 1/2" sill extenders where water penetration resistance is not
required)
• Maximum panel size: 48 5/8" x 93 1/2"
• Approved configurations: OX, XO, XX, OXXO, PX, XP, PXXP, PIX, XIP, PIXXIP, XIX, OIX, XIO,
PIIX, XIIP, XIIX, OIIX, XIIO, PIIIX, XIIIP
• Units must be glazed perASTM E1300-04/09 with safety glazing.
• This product is not rated to be used in the HVHZ.
• This product is not impact resistant and requires impact protection in wind borne debris regions.
• Frame material to be Aluminum 6005-T5.
Installation: Units must be installed in accordance with manufacturer's installation instructions and approval document
08-03087.
Certification of Independence: Please note that I don't have norwill acquire a financial interest in any company
manufacturing or distributing the product(s) forwhich this report is being issued. Also, I don't have nor will acquire a
financial interest in any other entity involved in the approval process of the listed product(s).
1 of 1
\\\\\\S//
�`� •��G E IV S� 9(P
.�_
o•���TAT�q,�
,Zss�ONAL1\a����
Luis R. Lomas, P.E.
FL No.: 62514
06/19/2017
(Validator / Operations Administrator)
MI Windows & Doors, LLC
P.O. Box 370
Gratz, PA 17030-0370
Attn: Rick Sawdey
AAMA
CERTIFICATION PROGRAM
AUTHORIZATION FOR PRODUCT CERTIFICATION
This authorization is based on the successful completion of tests, and the reporting to the AAMA Validator of the results of the tests by an
AAMA Accredited Laboratory. The product information below will be added to the next update of the AAMA Certified Products Directory.
SPECIFICATION
RECORD OF PRODUCT TESTED
AAMAIWDMAICSA 101/1.5.2/A440-08
LC-PG65.4842x2438(191x96)SD
COMPANY AND CODE
CPD NO.
SERIES MODEL & PRODUCT
MAXIMUM SIZE TESTED
DESCRIPTION
MI Windows & Doors, LLC
12011301140 SGD
FRAME
PANEL
16371
(AL)(OXXX)(OG)(INS GL)
4842 mm x 2438 mm
1235 mm x 2375 mm
Code: MTL
(MODIF)(ASTM)
(15'11" x 8'0")
(4'1" x 7'10")
This Certification will expire February 2, 2022 and requires validation until then by continued listing in the current AAMA Certified
Products Directory.
Product Tested and Reported by: Molimo, LLC
ReportNo.: 1223.0340642
Date of Report: March 3, 2017
JGS/JTS
ACP-04 (Rev.6/16)
I
Evaluated for Certification: March 28, 2017
'h'4-4L
A( ted Laboratories, Inc.
Authorized for Certification: March 28, 2017
Ame n Architectural Manufacturers Association