HomeMy WebLinkAboutProduct Evaluation Report; Swinging Exterior Door AssembliesR W R W Building Consultants, Inca
B Consulting and Engineering Services for the Building Industry
C P.O. Box 230 Valdco, FL 33595 Phone 813.659.9197
Florida Board of'Professional Engineers Certificate ofAuthodzation No. 9813
Product
Category
Sub Category
Manufacturer
Product Name
Swinging
Therma-Tru Corporation
Fiber -Classic and Smooth-Star
Exterior
Exterior Door
118 Industrial DrEdgerton,
Composite Edge Opaque Fiberglass Single Door
Doors
Assemblies
OH 43517
InswingNon-lmutswing
Phone 419.2984740.
".thon-Impact"
Scope: Product Evaluation report issued'by R W Building Consultants, Inc. & Lyndon F. Schmidt, P.E. (System ID # 1998) for
Thera-Tru Corporations, based on Rule Chapter No. 61G20-3, Method 1 D of the State of Florida Product Approval, Dept
of Business & Professional Regulation.
RW Building Consultants and Lyndon F. Schmidt, P.E. do not have nor will acquire financial interest in the company
manufacturing or distributing the product or in any other entity Involved in the approval process of the product named
herein.
Lfmftatfons:
1. This product has been evaluated and is in compliance with the 6th Edition (2017) Florida Building Code (FBC) structural requirements
excluding the "High Velocity Hurricane Zone" (HVHZ).
2. Product anchors shall be as listed and spaced as shown on details. Anchor embedment to base material shall be beyond wall dressing
or stucco.
3. For 2x stud framing construction, anchoring of these units shall be the same as that shown for 2x buck masonry construction.
4. Site conditions that deviate from the details of drawing FL-20461.1 require further engineering analysis by a licensed engineer or
registered architect
5. Fiber -Classic & Smooth -Star Door panels require the use of "J" part numbers and must be stained or painted within six months of
Installation
6. See drawing FL-20461.1 for size and design pressure limitations.
Supporting Documents.
1. Test Report No. Test Standard
TEL 01460145 ASTM E330(02), ASTM E331(00)
TEL 01461573 ASTM E330-02 & ASTM E331-00
2. Drawing No. Prepared by
No. FL-20461.1 RW Building Consultants, Inc. (CA #9813)
3. Calculations Prepared by
Anchoring RW Building Consultants, Inc. (CA#9813)
4. Quality Assurance
Certificate of Participation issued by National Accreditation &
Management Institute, certifying that Therma-Tru Corporations is
manufacturing products within a quality assurance program that
complies with ISO/IEC 17020 and Guide 53.
SHOPSTAMPREVIEW -#/m" Eden
Review Is for general compliance with the Construction Documents.
Responsibility for comecu ess of dimensions, details, quantities and safety
during fabrication Iles solely with the contactor.
I4 NoExcepdonsTaken Reviewed Sr. Dawn Boggio-Korbelak
0 Selected:
11/22/19 Da,.-, $.
Testing Laboratory Signed by
Testing Evaluation Lab.,lnc. V.K. Wright
Testing Evaluation Leb.,lnc. V.K. Wright
Stoned& Sealed by
Lyndon F. Schmidt, P.E.
Signed & Sealed by
Lyndon F. Schmidt, P.E.
Lyndon F. Schmidt, P.E.
FL PE No. 43409
12/7/2017
Sheet 1 of 1