HomeMy WebLinkAboutDesign Certification for Wind Load Compliance.•R.n�—an�l.�u.n 561 465 1448
A;e. 9
P.ei2
St. Lucie County
Building and Zoning Department
2300 VirginhrAvenue
Fort Pierce, FL 34982
561462-1553
Design Certification for Wind Load Compliance
This Certification is to be completed by the project design architect or engineer. This Certification must be submitted with all
applications for building permits involving the construction of new residence (single or multi- family), residential addition, any
accessory structure requiring building permit; and any nonresidential structure. This Certification shall not apply to interior
renovations (provided that no structural walls, columns orother similar component is being effected) and certain other minor building
Permits. For further assistance. please contact the Building Inspection Office at 462-1553 or 462-21 T)
Certification Statement:
I certify that, to the best of my knowledge and belief, these plans and specifications have been designed to
comply with the applicable structural portion of the Building Codes currently adopted and enforced by St. Lucie
County. I also certify that structural elements depicted'on these plans provide adequate resistance to the wind
loads and forces specified by current code provisions.
v
-` Desittn Parameters and Assumptions Used: (p. ease check or complete the appropriate box.)
1. Plorida Building Code 2001 Edition i/ ASCE 7-98
2. Building Design is (check one) Enclosed ✓ Partially Enclosed _ Open Building
3. Building Height: 4, Wind Speed Used in Building Design: -49 3 second gust
S. Wind Exposure Classification (refer to exposure tables In Building Code identified in Line #1): /S
6. Average Wind Velocity Pressure on Exterior Faces or Structure ZS. PSF
7. Peak Wind. Velocity Pressure on Exterior Faces of Structure 09,o pup
& Importance/Use Factor (obtain from Building Code): 1.O
9. Loads: Floor /Zs� PSF Roof/dead 2 s� PSF Roofflive Z(J PSF
10. Were Shear Walls Considered for Structure (check one): Yes X No ----fif No, attach explanatlow
11. Is a Continuous Load Path Provided (check one): Yes -XL No (if No, attach explanation)
IL. Are Component and Cladding Detail Provided (check one): Yes -YC, No _(ff No, attach explangdon)
13. Minimum Soil Bearing Pressure: 2020 PSF
As witnessed by my 1,1 ereby certify that the information included with this certification is tStte and
correct, to the b o nowt nd'belief. " ` "
Name: Certification #:`.Sseal Herat .'
Design Firm: Date: (0.4 .
SLiCDV Form 9 M QQ