HomeMy WebLinkAboutOwens Corning Shingle_HighlightedNEMO I etc.
Certificate of Authorization ##32455
353 Christian Street, Unit #13
Oxford, CT 06478
(203) 262-9245
ENGINEER EVALUATE TEST CONSULT CERTIFY
IIIIATION RFPOF
Owens Corning Evaluation Report 037940.02.12-R10
One Owens Corning Parkway FL10674-1115
Toledo, OH 43659 Date of Issuance: 02/06/2012
(740) 404-7829 Revision 10: 08/15/2019
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The products
described herein have been evaluated for compliance with the 6th Edition (2017) Florida Building Code sections noted
herein.
DESCRIPTION: Owens Corning Asphalt Roof Shingles
LABELING: Labeling shall be in accordance with the requirements of the Accredited Quality Assurance Agency noted
herein and FBC 1507.2.7.1 / R905.2.6.1
CONTINUED COMPLIANCE: This Evaluation Report is valid until the named product(s) changes, the referenced Quality
Assurance documentation changes, or provisions of the Code that relate to the product change. Acceptance of this
Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. of any changes to the
product(s), the Quality Assurance or the production facility location(s). NEMC) I etc. requires a complete review of this
Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "NEMOIetc. Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 10.
Prepared by:
4titLtltp„ "`
,.���„,,.rw^'""° ,,,..,rte°""'«. �tya S?•:� s
#�y.. The facsimile seal appearing was authorized by Robert
Robert J.M. Nieminen, P.E. F ..; :.. Nieminen, P.E. on 08/15/2019. This does not serve as an
Florida Registration No. 59166, Florida DCA ANE1983 " „-'��zt..r i� +"' electronically signed document.
CERTIFICATION OF INDEPENDENCE:
1. NEMO Ietc. does not have, nor does it intend to acquire, or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. NEMO I etc. is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither NEW I etc. nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any project
on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained specifically
for that purpose.
02018, NEMC) ETC, LLC
IMNEMO I etc.
ROOFING SYSTEMS EVALUATION:
Product Category: Roofing
Sub -Category: Asphalt Shingles
Compliance Statement: Owens Corning Asphalt Roof Shingles, as produced by Owens Corning, have
demonstrated compliance with the following sections of the 6t' Edition (2017) Florida Building Code and Florida
Building Code, Residential Volume through testing in accordance with the following Standards. Compliance is
subject to the Installation Requirements and Limitations / Conditions of Use set forth herein.
Section
Property
Standard
Year
1507.2.4, R905.2.3
Physical Properties
ASTM D1970
2015
1507.2.5, R905.2.4
Physical Properties
ASTM D3462
2010
1507.2.7.1, R905.2.6.1
Wind Resistance
ASTM D3161
2016
1507.2.7.1, R905.2.6.1
Wind Resistance
ASTM D7158
2011
Ent!
Examination
Reference
Date
Owens Corning
Declaration
Equivalency Declaration
08/06/2019
PRI(TST5878)
ASTM D1970
OCF-382-02-01
10/24/2017
UL LLC (CER9626)
Physicals & Wind Resistance
File R2453, Vol. 3
02/15/2007
UL LLC (CER9626)
Physicals & Wind Resistance
20120516-R2453
05/16/2012
UL LLC (TST9628)
Physical Properties
06CA20263
04/18/2006
UL LLC (TST9628)
Wind Resistance
11CA34308
02/18/2012
UL LLC (TST9628)
Physicals & Wind Resistance
4786093137
02/01/2014
UL LLC (TST9628)
Wind Resistance
4786126532
02/10/2014
UL LLC (TST9628)
Physical Properties
Classification letter
02/13/2014
UL LLC (TST9628)
Physical Properties
Classification letter
10/02/2015
Miami -Dade (CER1592)
FBC HVHZ Compliance
Various NOAs
Various
PRI (QUA9110)
Quality Control
Service Confirmation
04/05/2020
4.1 ACCESSORY STARTERS:
4.1.1 Starter Strip Shingle, Starter Strip Plus and SRS TopShield Starter are starter strips for asphalt roof shingles. Meets
ASTM D3462.
4.1.2 Starter Shingle ROTI is a mineral -surfaced, fiberglass -reinforced, self -adhering SBS modified bitumen starter strip,
nominal 7.2 -inch wide x 33 -ft 4 -inch long roll, for use with asphalt shingles. Meets ASTM D1970.
4.2 ASPHALT SHINGLES:
4.2.1 Classic® and Supreme' are fiberglass reinforced, 3 -tab asphalt roof shingles. Meets ASTM D3462
4.2.2 Berkshire' are fiberglass reinforced, 4 -tab asphalt roof shingles. Meets ASTM D3462.
4.2.3 Duration', TruDefinition Duration, Duration' Premium Cool, Tru Definition Duration' Designer Color Collection,
Tru Definition Oakridge', Oakridge and WeatherGuards HP are fiberglass reinforced, laminated asphalt roof
shingles. Meets ASTM D3462.
4.3 HIP & RIDGE SHINGLES:
4.3.1 Berkshire" Hip & Ridge Shingles with Sealant, DuraRidge® Hip & Ridge Shingles with Sealant, ProEdge° Hip & Ridge
Shingles and WeatherGuard' HP Hip & Ridge Shingles are fiberglass reinforced, hip and ridge asphalt roof shingles.
Meets ASTM D3462.
NEMO ETC, LLC Evaluation Report 037940.02.12-R10
Certificate of Authorization #32455 6T" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-RIS
Owens Corning Asphalt Roof Shingles Revision 30: 08/15/2019
Page 2 of 10
NEMO I etc.
5.1 This is a building code evaluation. Neither NEMO ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer
of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting
or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in FBC HVHZ jurisdictions.
5.3 Fire Classification is not part of this Evaluation Report; refer to current Approved Roofing Materials Directory for
fire ratings of this product.
5.4 Wind Classification:
5.4.1 The Owens Corning asphalt shingles noted in Section 4.2 are Classified in accordance with FBC Tables 1507.2.7.1
and R905.2.6.1 to ASTM D3161, Class F and/or ASTM D7158, Class H, indicating acceptable use in all wind zones
Up to Vasd = 150 mph (V„it = 194 mph). Refer to Section 6 for installation requirements to meet this wind rating.
Note: Classification by ASTM D7158 applies only to exposure category B or C, as defined in FBC 1609.4.3, and a
mean roof height of 60 feet or less. Calculations by a qualified design professional are required for conditions
outside these limitations. Contact the shingle manufacturer for data specific to each shingle.
5.4.2 Starter Strip Shingle, Starter Strip Plus and SRS TopShield Starter noted in Section 4.1.1 and the Owens Corning hip
& ridge shingles noted in Section 4.3 are Classified in accordance with FBC Tables 1507.2.7.1 and R905.2.6.1 to
ASTM D3161, Class F, indicating acceptable use in all wind zones up to Vasd = 150 mph (V,it = 194 mph). Refer to
Section 6 for installation requirements to meet this wind rating.
5.4.3 Refer to Owens Corning published information on wind resistance and installation limitations.
5.5 All products in the roof assembly shall have quality assurance audit in accordance with F.A.C. Rule 61G20-3.
INSTALLATION:6.
6.1 GENERAL:
6.1.1 Roof deck, slope, underlayment and fasteners shall comply with FBC 1507.2 / R905.2 and the shingle
manufacturer's minimum requirements.
6.1.2 Underlayment shall be acceptable to the shingle manufacturer and shall hold current Florida Statewide Product
Approval, or be Locally Approved per Rule 611320-3, per FBC Sections 1507.2.3, 1507.2.4 or R905.2.3.
6.1.3 Fasteners shall be in accordance with the shingle manufacturer's published requirements, but not less than FBC
1507.2.6 or R905.2.5. Staples are not permitted.
6.1.4 Owens Corning asphalt shingles are acceptable for use in reroof (tear -off) or recover applications, subject to the
limitations set forth in FBC Section 1511 or R908 and published installation instructions.
6.2 ACCESSORY STARTERS:
6.2.1 Installation of Starter Strip Shingle, Starter Strip Plus and SRS TopShield Starter shall comply with the Owens
Corning current published instructions, using minimum five (5) nails per strip.
Felt w.deriepmet” ...._. Deck
SWA"ed
wva4twriow
" umd.isYmeat
Drip,_
Drip ad"
adw
- Nib boated
r -J` from errs
kttt fhsf
S444081atp akeastve
Stena Strip
, -'' positioned abmp save
slrinph with ....
_....__....s,.
,.
E" osmosed
Start. Strip sh$tpie -whimp .oras and ekes Z-`,."
Figure 1: Minimum Nailing, Starter Strip
Figure 2: Minimum Nailing, btarter zrip rius
Evaluation Report 037940.02.12-1110
NEMO ETC, LLC
Certificate of Authorization #32455 6T" EDITION (2017) FSC NON-HVHZ EVALUATION F1.10674-1115
Owens Corning Asphalt Roof Shingles Revision 10: 08/15/2019
Page 3 of 10
IMMEMO I etc.
6.2.2 Installation of Starter Shingle Roll shall comply with the Owens Corning current published instructions.
Drip
Deck
6.3 ASPHALT SHINGLES:
6.3.1 Installation of asphalt shingles shall comply with the Owens Corning current published instructions, using
minimum four (4) nails per shingle in accordance with FBC 1507.2.7 or R905.2.6, with the following exceptions:
y Berkshire' shingles require minimum five (5) nails per shingle.
WeatherGuard` HP shingles require minimum six (6) nails per shingle.
Where the roof slope exceeds 21 units vertical in 12 units horizontal, special methods of fastening are required
Refer to Owens Corning published information on wind resistance and installation limitations.
6.3.1.1 Classic® & Supreme:
Normal Mansard or Area pare
Wind Areas High Wind deavanes y
Area para vientos normales Areas vientos fuertes
t' tai rt" 2" (B r2'
tt• �r,.
5" Exposure
Exposici6n
Figure 4: Minimum Nailing, Classic & Supreme
(Standard Size)
Normal Mansard or Area para
Wind Areas High Wind daavenes y
Area pare vientos normales Areas vientos /uertas
12 r1. 2., _(el r2. V
i •
5 5/8" Exposure
Exposici6n
Figure 5: Minimum Nailing, Classic & Supreme
(Metric Size)
NEMO ETC, LLC Evaluation Report 037940.02.12-1110
Certificate of Authorization #32455 6T" EDITION (2017) FBC NON-HVHZ EVALUATION F110674-1115
Owens Corning Asphalt Roof Shingles Revision 30: 08/15/2019
Page 4 of 10
Underlayment
Drip edge
fE
i�
y ✓9Y' E
de
s
Starter Shingle Rolf adhered
directly to underlayment and
y
primed drip edge
Self-sealing adhesive
positioned along eaves
Figure 3: Starter Shingle Roll
6.3 ASPHALT SHINGLES:
6.3.1 Installation of asphalt shingles shall comply with the Owens Corning current published instructions, using
minimum four (4) nails per shingle in accordance with FBC 1507.2.7 or R905.2.6, with the following exceptions:
y Berkshire' shingles require minimum five (5) nails per shingle.
WeatherGuard` HP shingles require minimum six (6) nails per shingle.
Where the roof slope exceeds 21 units vertical in 12 units horizontal, special methods of fastening are required
Refer to Owens Corning published information on wind resistance and installation limitations.
6.3.1.1 Classic® & Supreme:
Normal Mansard or Area pare
Wind Areas High Wind deavanes y
Area para vientos normales Areas vientos fuertes
t' tai rt" 2" (B r2'
tt• �r,.
5" Exposure
Exposici6n
Figure 4: Minimum Nailing, Classic & Supreme
(Standard Size)
Normal Mansard or Area para
Wind Areas High Wind daavenes y
Area pare vientos normales Areas vientos /uertas
12 r1. 2., _(el r2. V
i •
5 5/8" Exposure
Exposici6n
Figure 5: Minimum Nailing, Classic & Supreme
(Metric Size)
NEMO ETC, LLC Evaluation Report 037940.02.12-1110
Certificate of Authorization #32455 6T" EDITION (2017) FBC NON-HVHZ EVALUATION F110674-1115
Owens Corning Asphalt Roof Shingles Revision 30: 08/15/2019
Page 4 of 10
6.3.1.2 Berkshire®:
Sealant strip
La all da seNadm
Figure 6: 5 -Nail Pattern, Berkshire
ONEMOjetc.
Figure 7: 6 -Nail Pattern, Berkshire
Figure 8: Mansard or Steep Slope Pattern, Berkshire
Evaluation Report 037940.02.12-1110
NEMO ETC, LLC F1.10674-1315Certificate of Authorization #32455 6T" EDITION (2017) FBC NON-HVHZ EVALUATION
Owens Corning Asphalt Roof Shingles Revision 10: 08/15/2019
Page 5 of 10
AAL
IV)
MEMO j etc.
6.3.1.3 Duration® TruDefinition® Duration Duration® Premium Cool & TruDefinition® Duration® Designer Color Collection:
4 -Nail Fastening Pattern
sureNaim fastening arra width
Nail, Typical
1^, 17, 12" 1"
cen sweet i.:'
6-118" 5-518^'
Figure 9: Standard 4 -Nail Pattern, Duration
Figure 10: 6 -Nail Pattern, Duration
Fastening for Slopes Greater Than 21:12
SureflaiW fastening area width
Nail, Typical
1., 12,^ 12"
�syy!7ah F,cW+ii�9tfrtttir�'.. ! iw �4 gtNaua +*�. __ S�at�rtnE.p &zsrlva� _�;"
6-118" 5-518"
eRpos,aa .
�2•'
Four 1^' Spots of Asphalt Roofing Cement
Figure 11: Mansard or Steep Slope Pattern, Duration
NEMO ETC, LLC Evaluation Report 037940.02.12-R10
Certificate of Authorization #31455 6'" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-R1S
Owens Corning Asphalt Roof Shingles Revision 30: 08/15/2019
Page 6 of 10
6.3.1.4 Tru Definition' Oakridge® Oakridge®:
4 Nail Pattern
Esquema corn 4 clauos
ONEMOjetc.
5 519" Exposure Nails
Exposition de 5 5/8 pufg ciavos
D Deo cxpv,. o
Exposition de 5 5/8 pufg.
Figure 12: Standard 4 -Nail Pattern, Oakridge
6 Nail Pattern
Esquema con 6 clavus
55/8" Exposure
Fx;imid6n de 5 5/8 pufg.
Moms
t+blu txposule
Exposition de 55/8 pufg.
Figure 13: 6 -Nail Pattern, Oakridge
Fastening for Slopes Greater Than 21:12
sumNaiKw fastening area width
Nail Typical
12
8-118" 5518'
Four 1" Spots of Asphalt Roofing Cement
Figure 14: Mansard or Steep -Slope Pattern, Oakridge
NEMO ETC, LLC Evaluation Report 037940.02.12-1110
Certificate of Authorizotion #32455 6T" EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-R15
Owens Corning Asphalt Roof Shingles Revision 30: 08/15/2019
Page 7 of 10
6.3.1.5 WeatherGuard® HP:
5 5ra' E sua
Figure 15: 6 -Nail Pattern, WeatherGuard HP
6Mail Petty it 6 8" from bottom
Estuerre con 6 clavos of Nail
6 11tte
Clave a 6118 tj, de to
5 5T Expnre 6 Fastw ws parte inferior to Is tqa
Exposici&n do 5 51109. 6 sa etadores
Ftp t" Spots of Ault Rasf C,ernent
Guano p altos da Ca rta da tadw de asfatto do 7 ptg#sda
Figure 16: Mansard or Steep -Slope Pattern, WeatherGuard HP
A&I
IMNEMO j etc.
6.4 HIP & RIDGE SHINGLES:
6.4.1 Installation of asphalt shingles shall comply with the Owens Corning current published instructions.
r Berkshire' Hip and Ridge Shingles with Sealant and Dura Ridge° Hip & Ridge Shingles with Sealant require
minimum two (2) nails per shingle.
r WeatherGuard HP Hip and Ridge Shingles and ProEdge° Hip & Ridge Shingles require minimum four (4)
nails per shingle.
Refer to Owens Corning published information on wind resistance and installation limitations.
NEMO ETC, LLC Evaluation Report 037940.02.12-1110
Certificate of Authorization #32455 6'" EDITION (2017) FBC NON-HVH2 EVALUATION FL10674-R15
Owens Corning Asphalt Roof Shingles Revision 10: 08/15/2019
Page 8 of 10
6.4.1.1
nt4
NEMO ( etc.
Berkshire® Hip & Ridge with Sealant and DuraRidge® Hip & Ridge Shingles with Sealant:
Fig. A
Prevailing Wind Direction
f— Direccion del viento predorninante
Figure 17: Isometric View, Berkshire and uuraKlage
6.4.1.2 WeatherGuard® HP Hip & Ridge Shingles:
Fig. A 9 q
Prevailing Wind r
-- Direction_ A
A
Nails
t E f k
E>�$ur
Figure 19: Isometric View, WeatherGuard HN Hip & Klage
Fig. B
Tap View
Vista superior
Nail
Clava
g +�iiYt(
! QrINlRS CD►RIrY41
`tatl'
I
I
yI v
41i d
ul
I
I
Evaluation Report 037940.02.12-1110
NEMO ETC, LLC FL10674-RI5
Certificate of Authorization #32455 6?" EDITION (2017) FBC NON-HVHZ EVALUATION
`tatl'
I
I
yI v
41i d
ul
I
I
Figure 18: Plan View, Berkshire and uuraKlage
Fig. C Hip & Ridge Shingle Fastening
Top U Iewi
Pails Nails
t„
V.
Exposure
Figure 20: Plan View, WeatherGuard HP Hip & Ridge
Owens Corning Asphalt Roof Shingles Revision 30: 08/15/2019
Page 9 of 10
6.4.1.3 ProEdge® Hip & Ridge Shingles:
Prevailing
Wind Direetion Suhnt
5" Expaw e
Fasten 7'/r"'
Cover Expa"d
Fasteners with
Roof Cafrasnt
Figure 21: Isometric View, ProEdge
ONEMO I etc.
Standard rt1"---►
F"taning
Pattern
'�1 (" 4 �!"� �_r
t2* 1 — Saalatt
��•
(,i`� EJipIIlllf[t
Figure 22: Plan View, ProEdge
7.1 Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein.
7.2 Asphalt shingle wrappers shall indicate compliance with one of the required classifications detailed in FBC Table
1507.2.7.1 / R905.2.6.1.
As required by the Building Official or Authority Having jurisdiction in order to properly evaluate the installation
of this product.
Contact the named QA entity for information on which plants produce products covered by Florida Rule 61G20-3
QA requirements.
PRI Construction Materials Technologies, LLC— QUA9110 ; 1513
1621-5777; bwilson@pricmt.com
- END OF EVALUATION REPORT -
NEMO ETC, LLC Evaluation Report 037940.02.12-1130
Certificate of Authorization #32455 6"EDITION (2017) FBC NON-HVHZ EVALUATION FL10674-1115
Owens Corning Asphalt Roof Shingles Revision 10: 08/15/2019
Page 10 of 10