Press Alt + R to read the document text or Alt + P to download or print.
This document contains no pages.
HomeMy WebLinkAboutCano 2917 PABOS Home Log In User Registration Hot Topics Submit Surcharge Slats & Facts Publications Contact Us BCIS Site Map Links Search
dbOr
( Product Approval
,T¢ . USER: Public User
Product Aparoval wienu > Product or Aqplicatian Search > implication Ust > Application Detail
FL # FL11602-R10
Application Type Revision
Code Version 2017
Application Status Approved
Comments
Archived
Product Manufacturer Owens Corning Roofing and Asphalt, LLC
Address/Phone/Email one Owens Corning Parkway
Toledo, OH 43645
(740) 321-6345
Greg. Keeler@owenscorning.com
Authorized Signature Keeler Greg
Greg.Keeier@owenscorning.com
Technical Representative Greg Keeler
Address/Phone/Email 2790 Columbus Road
Granville, OH 43023
(740) 321-6345
greg.keeler@owenscorning,corn
Quality Assurance Representative
Address/Phone/Email
Category Roofing
Subcategory Underlayments
Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed Florida
Professional Engineer
Evaluation Report - Hardcopy Received
Florida Engineer or Architect Name who developed the Robert Nieminen
Evaluation Report
Florida license PE-59166
Quality Assurance Entity Intertek Testing Services NA, Inc. - QA Entity
Quality Assurance Contract Expiration Date 12131/2020
Validated By John W. Knezevch, PE
" Validation Checklist - Hardcopy Received
Certificate of Independence FL11602 R10 -Oi� I 2019 92C!Q NIEMINEN•pgf
Referenced Standard and Year (of Standard) Standard Year
ASTM D1970 2015
ASTM D226 (physicals) 2009
ASTM D4798 2011
FRSA/TR1 April 2012 2012
TAS 117(B) 1995
UL1897 2012
Equivalence of Product Standards
Certified By
Sections from the Code
Product Approval Method Method 1 Option D
Date Submitted
10/17/2019
Date Validated
10/17/2019
Date Pending FBC Approval
10/2012019
Date Approved
12/10/2019
Summary of Products
¢ FL # Model, Number or Name
Description —
1 02.1 T manta lum Roof Underlayments
Synthetic sheet -type roof underlayments
Limits of Use
Installation Instructions
fft Approved for use in HVHZ- No
EL11602 R10 II 2019 10 FINAL ER F1_11602-910 p_ f
Verified By: Robert Nieminen PE-59166
Approved for use outside HVHZ: Yes
Impact Resistant: N/A
Created by Independent Third Party: Yes
Design Pressure- +N/A/-45
Evaluation Reports
i other: 1.) The design pressure noted herein pertains to use of
Fl 11602 Rio AE 2D19 10 FINAL ER FL11602-R10.pdf
Created by Independent Third Party: Yes
a specific underlayment system beneath foam -on the sytsems.
Refer to ER Section 5,6.3 for details. 2.) Refer to ER Sections 5
I and 6 for other Limits of Use.
Contock Us :: 2601 Blair Stone Road, Tallahass� FE 2= Phone: $50-487-1824
The State of Florida is an AAJEe0 employer. right 2Qp7-2013 State of Florida.:: Privacy Statement :: Accessibility Statement :: Rfunrl Statement
Under Florida law, email addresses are public records. If you do not want your a -mail address released in response to a public -records request, do not send electronic
mall to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.1395- *Pursuant to Section 455.275(i),
Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have one. The emails
provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal address, please
provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S., please dick her
Product Approval Accepts: (
Credit Card
Safe
NEMOI etc.
Certificate of Authorization #32455
353 Christian Street, Unit #13
Oxford, CT 06478
(203) 262-9245
ENGINEER EVALUATE TEST CONSULT CERTIFY
Owens Corning Roofing and Asphalt, LLC
One Owens Corning Parkway
Toledo, OH 43659
(740) 321-6345
Evaluation Report 111980.11-08-R11
FL11602-it10
Date of Issuance;11/03/2008
Revision 11:10/17/2019
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The products
described herein have been evaluated for compliance with the 6u' Edition (2017) Florida Building Code sections noted
herein.
DESCRIPTION: Titanium""' Roof Underlayments
LABELING: Labeling shall be in accordance with the requirements of the Accredited Quality Assurance Agency noted
herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced
Quality Assurance documentation changes, or provisions of the Code that relate to the product change. Acceptance of
this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. of any changes to the
product(s), the Quality Assurance or the production facility location(s). NEMO ETC, LLC requires a complete review of
this Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded by the words "MEMO j etc. Evaluated" may be displayed in
advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the jots site at the request of the Building Official.
This Evaluation Report consists of pages 2 through S.
Prepared by:
>,
Robert J.M. Nieminen P.E.
,SFr .. Tf The facsimile seal appearing was authorized by Robert
Florida Registration No. 59I66, Florida ©CA ANE1983
.
'f✓ ,;, ; s4' ` Nieminen, P.E. on 10/17/2019. This does not serve as an
electronically signed document.
CERTIFICATION OF INDEPENDENCE;
1. NEW ETC, LLC does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. NEW ETC, LLC is not Owned, operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither NEMO ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any
project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
Q2018 NEMO ETC, LLC
ONEMOJetc.
ROOFING COMPONENT EVALUATION:
I. •P
Product Category:
Roofing
Sub -Category:
U nderlayment
Compliance Statement: Titanium"' Roof Underlayments, as produced by Owens Corning Roofing
and Asphalt, LLC,
have demonstrated compliance with the intent of the following
sections of the 61h Edition (2017) Florida Building
Code through testing in accordance
with applicable sections the
following Standards. Compliance
is subject to the
Installation Requirements and Limitations / Conditions of Use set forth herein.
2. STANDARDS'
Section
Pro a
Standard
Year
1504.11
Wind Uplift
UL 1897
2012
1507.1.1, R905.1.1 Exception
Unrolling, Breaking Strength, Pliability ASTM D226
2009
1507.1.1, R905.1.1 Exception
Tear Strength
ASTM D1970
2015
1507.1.1, T1507.1.1,1507.2.9.2
Physical Properties
ASTM D1970
2015
1507,3.3
Physical Properties
FRSA/TRI April 2012 (04-12)
2012
TAS 110
Accelerated Weathering
ASTM D4798
2011
TAS 110
Pull -through resistance
TAS 117(8)
1995
REFERENCES -
Entity
Examination
Reference
Bate
ERD (TST6049)
Physical Properties
115010.04,09
04/29/2009
ERD (TST6049)
Physical Properties
115010.05.10
05/14/2010
ERD (TST6049)
Physical Properties
135520,06.11
06/15/2011
ERD (TST6049)
ASTM D226
138010.08.11
08/11/2011
ERD (TST6049)
Wind Uplift
135520.08.11-1
08/12/2011
ITS(TST1509)
ASTM D226
311801000Q-003
04/26/2007
ITS(TST1509)
ASTM D226
3130639COQ-002A
08/21/2007
ITS (TST1509)
Physical Properties
3126617COQ-005
10/31/2007
ITS(TST1509)
ASTM D226
101823107COQ-011
01/23/2015
ERD (TST6049)
Physical Properties (NH)
4j-OC-19-SSUDL-01.A
06/14/2019
Owens Corning
Product equivalency
Declaration
06/18/2018
PRI (TST5878)
ASTM D1970
OCF-341-02-01
09/20/2017
PRI(TST5878)
ASTM D1970; Tear strength
OCF-331-02-02
10/03/2017
PRI (TST5878)
ASTM D1970; Tear strength
OCF-332-02-02
10/03/2017
PRI(TSTS878)
ASTM D1970; Tear strength
OCF-334-02-02
10/03/2017
PRI (TST5878)
FRSA/TRI April 2012 (04-12), partial
OCF-343-02-01
11/09/2017
PRI (TST5878)
ASTM 04798
OCF-341-02-01
11/27/2017
PRI (TST5878)
TAS 117(B);Pull-through
OCF-422-02-02
04/03/2018
PRI (TST5878)
FRSA/TRI April 2012 (04-12), partial
OCF-425-02-01
08/13/2018
PRI (TST5878)
ASTM D226 / ASTM D4798
OCF-331-02-01 R1
05/07/2019
PRi (TST5878)
ASTM D226 /ASTM D4798
OCF-332-02-01 R1
05/07/2019
PRI (TST5878)
ASTM D226 / ASTM D4798
OCF-334-02-01 R1
05/07/2019
PRI (TST5878)
UL1897
1378TO02
07/10/2019
PRI (TST5878)
Tensile adhesion
OCF-507-02-01
08/13/2019
ITS (QUA1673)
Quality Control
ITS Listings
Current
ITS (QUA1673)
Quality Control
Service Confirmation
09/30/2017
MEMO ETC, LLC Evaluation Report 1119$0.11.08-fill
Certificate offiuthorizotion ff3M5 6"" EDITION (2017) FBC NON-HVHZ EVALUATION FL11602-R10
Titanium Roof Underlayments Revision 21; 20/27/2019
Page 2 of a
NEM01 etc.
Product Specification Plant(s) Description
4.1 Titanium"' PSU-30 ASTM D1970 Dubai, UAE & unreinforced polymer modified bitumen material adhered
and FRSA/TRl Brentwood, NH to the underside of a polymer -coated, synthetic woven
April 2012 sheet. The underside is backed with a release film. Unit
weight 24lbs/square
42 Titanium'UDL-l5 FBCl607.1.1 Qingdao, China synthe1icshe�—e-'odedaymrntunmpdsedofawoven
&R9O5.1.1 core coated onone side with apolymer coating. Unit
(Exception) weight Z.5}bs./squmm
4.3 Titanium1mVDL80 FHCl5O7.I.1 Mission, BC, synthetic sheet -type ondadaymentcomprised nfawoven
&8985.1.l Canodo& core coated uuboth sides with apolymer coating. Unit
(Exception) Qingdao, China weight 4.0ibu./aquae
4.4 TitaniumT11UDL-50 F8[1507.1.2 Mission, BC, synthetic sheet -type vnder|aymentcomprised ufuwoven
&K9OlI'1 CanadaQ core coated onboth sides with apolymer coating. Unit
(Exception) [UnQdao'China weight 4.7|6o./square
5.1 This is a building code evaluation, Neither NEW ETC, LLC nor Robert Nleminen, P.E. are, in any way, the Designer
of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or
design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report isnot for use inFBCHVMZjurisdictions.
6.3 Fire Classification is not part of this report; refer to current Approved Roofing Materials Directory for fire ratings of
this product.
5.4 litanivm`° 8uofUndedayments may be used with any prepared roof cover where the product is specifically
referenced within FBCapproval documents. Ifnot listed, arequest may bnmade tnthe Authority Having Jurisdiction
for approval based on this evaluation combined with supporting data for the prepared roof covering.
B
Allowable Roof Covers:
TAsLE I: RooFC0VER OPTIONS
Asphalt
Wood Shakes
Underlayment
Shingles
Nail.OnTile
foam -On 711a
Metal
Shingles
State
�,fitaniurn PSU- - 30
Yes
Yes
Yes
Yes
Yes
Yes
Titanium UDL-25
Yes
No
No
Yes
Yes
Yes
Yes
Yes
4ftaniurn UDL-30
Yes
(Base Sheet in 2-ply
(Basee Sheet in 2-ply
Yes
Yes
Yes
system)
system)
Titanium UDL-50
Yes
No
No
Yes
Yes
Yes
NEW ETC,uz Evaluation Report u1980,#.08-Ril
c°Tifaptc*A.momammmo45s a�EDITION (2uz)FSCwom-HvxzEVALUATION e11602-Rm
Titanium Roof onornayments Revision 1x.u01x7/20my
Page sofu
Ea I etc.
5.5.1 "Foam -On Tile" is limited to use of following Approved the adhesives / underlayment combinations.
5.6
5.6.1
TABLE IA: ALLOwAB1,E TILE Ao"EstvE / UNDERLA`iMENT COMBINATIONS' 1
Underlayment
Adhesive
Florida Product Approval
Titanium PSU-30
DUPONT Tile Bond—
FL22525
1CP Adhesives Polyset' AH-160
FL6332
ICP Adhesives Polyset' RTA-1
FL6276
Allowable Substrates (for self -adhering):
TABLE 2: SUBSTRATE OPTiONS
Underlayment
Primer
Substrates
Titanium PSLI-30
(Optional) ASTM D41
plywood
None
ASTM D226 felt
ASTM D41
----.
Titanium UDL-30
None
Titanium UDL-30 (inverted)
#1
#2
Wind Resistance for Underlayment Systems in Foam -On Tile Applications: FRSA/TRI April 2012 (04-12) does not
address wind uplift resistance of all underlayment systems beneath foam -on tile systems, where the underlayment
forms part of the load -path. The following wind uplift limitations apply to underlayment systems that are not
addressed in FRSA/TRI April 2012 (04-12) and are used in foam -on the applications. Maximum Design Pressure is
the result of testing for wind load resistance based on allowable wind loads, and reflects the ultimate passing
pressure divided by 2 (the 2 to 1 margin of safety per FBC 1504.9 has already been applied). Refer to FRSA/TRl April
2012 (04-12), Appendix A, Table 1A or F8C 1609 for determination of design wind loads.
Maximum Design Pressure = -45 Ps€:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Flaying
Jurisdiction.
Primer: (Optional) ASTM 041
Underlayment: One or two plies, Titanium PSU-30, self -adhered and back -nailed max. 6" o.c. with 12 ga.
galvanized annular rink shank nails through 32 ga., 1-5/8-inch diameter tin caps in accordance with
Owens Corning Roofing and Asphalt, LLC published installation requirements.
Maximum Design Pressure = -30 psf*:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having
Jurisdiction,
Base Sheet: Titanium UDL-30 (inverted)
Fasteners: 12 ga, annular ring shank nails having not less than 20 rings per inch, heads not less than 3/8 inch
diameter and length sufficient to penetrate through the thickness of deck not less than 3/16-inch
with min. 32 ga., 1-5/8" diameter tin caps
Spacing: 6-inch o.c. at 4-inch wide side laps and 12-inch o.c. at three (3), equally spaced center rows.
Primer: ASTM D41 primer required at all tin -caps.
Underlayment: One or two plies, Titanium PSU 30, self -adhered and back -nailed max. 6" o.c. with 12 ga. galvanized
annular rink shank nails through 32 ga., 1-5/8-inch diameter tin caps in accordance with Owens
Corning Roofing and Asphalt, LLC published installation requirements.
'Refer to rile Manufacturer's or Adhesive Manufacturer's Florida Product Approval for Overturning Moment Resistance Performance.
NEIVIG ETC, LLC Evaluation Report 111980.i1.08-Rif
certificate OfAufhonzotion #32455 6T4 EDITION (2017) FBC NON-4VH2 EVALUATION FL11602-silo
Titanium hoof Underlayments Revision 11: 10/1712019
Page 4 of 8
t
#3 Maximum Design Pressure = -30 psf*:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Titanium UDL-30 (printed side up)
Fasteners: 12 ga. annular ring shank nails having not less than 20 rings per inch, heads not less than 3/8 inch
diameter and length sufficient to penetrate through the thickness of deck not less than 3/16-inch
with min. 32 ga., 15/3" diameter tin caps.
Spacing: 6-inch o.c_ at 4-inch wide side laps and 12-inch o.c. at three (3), equally spaced center rows.
Primer: ASTM D41 primer required over printed side of UDL-30.
Underlayment: One or two plies, Titanium PSU 30, self -adhered and back -nailed max. 6" o.c. with 12 ga. galvanized
annular rink shank nails through 32 ga., 1-5/8-inch diameter tin caps in accordance with Owens
Corning Roofing and Asphalt, LLC published installation requirements.
##4 Maximum Design Pressure = -45 psf*:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Titanium UDL-30 (inverted)
Fasteners: 12 ga. annular ring shank nails having not less than 20 rings per inch, heads not less than 3/8 inch
diameter and length sufficient to penetrate through the thickness of deck not less than 3/16-inch
with min. 32 ga.,1-5/8" diameter tin caps
Spacing: 6-inch o.c. at 4-inch wide side laps and 8-inch o.c, at three (3), equally spaced center rows.
Primer: ASTM D41 primer required at all tin -caps.
Underlayment: One or two plies, Titanium PSU 30, self -adhered and back -nailed 6" o.c. with 12 ga. galvanized
annular rink shank nails through 32 ga., 1-5/8-inch diameter tin caps in accordance with Owens
Corning Roofing and Asphalt, LLC published installation requirements.
#5 Maximum Design Pressure = -45 psf*:
Deck: Min. 15/32-inch plywood to meet project requirements to satisfaction of Authority Having
Jurisdiction.
Base Sheet: Titanium UDL-30 (printed side up)
Fasteners: 12 ga. annular ring shank nails having not less than 20 rings per inch, heads not less than 3/8 inch
diameter and length sufficient to penetrate through the thickness of deck not less than 3/16-inch
with min. 32 ga.,1-5/8" diameter tin caps.
Spacing: 6-inch o.c. at 4-inch wide side laps and 8-inch o.c. at three (3), equally spaced center rows.
Primer: ASTM D41 primer required over ,printed side of UDL-30.
Underlayment: One or two plies, Titanium PSU 30, self -adhered and back -nailed 6" o.c. with 12 ga. galvanized
annular rink shank nails through 32 ga_, 1-5/8-inch diameter tin caps in accordance with Owens
Corning Roofing and Asphalt, LLC published installation requirements.
5,6.4.1 For mechanically attached Base Sheet, the maximum design pressure for the selected assembly shall meet or
exceed that required under FRSA/TR1 April 2012 (04-12), Appendix A, Table IA.
Alternatively, the maximum design pressure for the selected assembly shall meet or exceed the Zone 1 design
pressure determined in accordance with FBC 1609, Zones 2 and 3 shall employ an attachment density designed by
a qualified design professional to resist the elevated pressure criteria. Commonly used methods are ANSI/SPRI
WD1, FM Loss Prevention Data Sheet 1-29 and Roofing Application Standard RAS 117. Assemblies marked with an
asterisk* carry the limitations set forth in Section 2.2.10.1 of FM Loss Prevention Data Sheet 1-29 (January 2016)
for Zone 2/3 enhancements.
5.7 Exposure Limitations:
Titanium UDL-25, Titanium UDL-30, Titanium UDL-50 or Titanium PSU-30 shall not be left exposed for longer than
180-days.
NEW ETC, tic Evaluation Report 111980.11.WR11
Certificate ofAuthorization #32455 67" €DITiON {2017) F8C NON-HVHZ EVALUATION FL11602-R10
Titanium Roof Underlayments Revision 11: 10117/2019
Page 5 of 8
NIFIVIEM0 I etc.
5.8 Tile Slippage Limitations rper FRSA/TRI April 2012 t04-l2j1:
When loading roof tiles on the underlayment in direct -deck tile assemblies, the maximum roof slope shall be as
follows. These slope limitations can only be exceeded by using battens during loading of the roof tiles.
TABLE 3: TOLE SLIPPAGE LimyrATiONS FOR DIRECT -DECK TILE iNsTALLATIoNs
Underlayment
Tile Profile
Staging Method
Maximum Slope
Titanium PSU-30
Flat
Max.10-tile stack
5:12
Flat
Max 5-tile stack
6:12
Lugged
Max.10-tile stack
4:12
Lugged
Max. 5-tile stack
5.12
Lugged
Max. 10-tile stack f 5 over Q
5:12
�__-....
6. s
6.1 Titanium Roof Underiayments shalt be installed in accordance with Owens Corning Roofing and Asphalt, LLC
published installation requirements subject to the Limitations set forth in Section 5 herein and the specifics noted
below.
6.2 Re -fasten any loose decking panels, and check for protruding nail heads. Sweep the substrate thoroughly to
remove any dust and debris prior to application, and prime the substrate (if applicable).
6.3 Titanium"' UDL-25, Titanium UDL-30 or Titanium UDL-50:
6.3.1 Shall be installed in compliance with the requirements for ASTM D226, Type I or it underlayment in FBC Table
1507.1.1 or R905.1.1 for the type of prepared roof covering to be installed, considering the wider sheet -width.
6.3.2 Fasteners:
Mechanical attachment of Titanium UDL-25 and Titanium UDL-30 is limited to ring shank roofing nails with
minimum 1-inch diameter plastic caps.
Mechanical attachment of Titanium UDL-50 is limited to ring shank roofing nails with minimum 3/8-inch diameter
heads; ring shank roofing nails with minimum 1-inch diameter plastic caps; screws and plates; or plastic cap staples.
6.3.2.1 Code Reference: The Exception statement in FBC 1507.1.1 and F8C R905.1.1 states: ':,.except metal cap nails shall
be required where the ultimate design wind speed, Vauit, equals or exceeds 150 mph."
Owens Corning Roofing and Asphalt, LLC has furnished data to permit the use of 1-inch diameter plastic cap nails
in lieu of metal cap nails for these applications, when the Titanium"" UDL-25, Titanium UDL-30 or Titanium UDL-50
underlayment is installed beneath mechanically fastened prepared roof covers referenced in FBC Table 1507.1.1
or R905.1.1.
NEM0 ETC, LLC Evaluation Report 111980.11.08-R11
Certificate ofAuthorkation #32455 e EDITION (2017) FBC LION-HVHZ EVALUA T ION FL11602-R10
Titanium Roof Undertayments Revision 11:10/17/2019
Page 6 of 8
*NEM0I etc.
6,3.3 Slopes of 4.12 or greater:
End (vertical) laps shall be minimum 6-inches and side (horizontal) laps shall be minimum 4-inches. End (vertical)
laps shall be offset from course to course not less than 6 feet.
Minimum attachment shall be in accordance with FBC Table 1507.1.1 or R905.1.1. When batten systems are to be
installed atop the underlayment, the underlayment need only be preliminarily attached pending attachment of the
battens.
6.3.4 Slopes of 2:12 to less than 4:12:
End (vertical) laps shall be minimum 12-inches and side (horizontal) laps shall be minimum 25-inches. End (vertical)
laps shalt be offset from course to course not less than 6 feet,
Begin by fastening a 25-Inch wide strip along the eaves. Place a full -width sheet over the starter, completely
overlapping the starter course. Continue upslope, maintaining minimum 25-inch side (horizontal) laps, resulting in
a double -layer application.
Minimum attachment shall be in accordance with FBC Table 1507.1.1 or R905.1.1. Secure end laps 4-inch o.c.
When batten systems are to be installed atop the underlayment, the underlayment need only be preliminarily
attached pending attachment of the battens.
6.4 Titanium'"" PSU-30:
6.4.1 Non -Tile Installations:
Shall be installed in compliance with the codified requirements for ASTM D1970 underlayment in FBC Table
1507,1.1 for the type of prepared roof covering to be installed, and Owens Corning published requirements.
TitaniumF"s PSU-30 shall be back -nailed in accordance with Owens Corning published installation requirements,
6.4.2 Nail -On Tile Applications:
Shall be installed in compliance with the requirements for Self -Adhered Membrane underlayment set forth in
FRSA/TRI April 2012 (04-12), and Owens Corning published requirements. Titanium"4 PSU-30 shall be back -nailed
max. 6" o.c. with 12 ga. galvanized annular rink shank nails through 32 ga., 1-5/8-inch diameter tin caps in
accordance with Owens Corning published installation requirements.
Refer to Section 5.8 for tile staging limitations.
6.4.3 foam -On Tile Applications:
Shall be installed in compliance with the requirements for Self -Adhered Membrane underlayment set forth in
FRSA/TRI April 2012 (04-12), and Owens Corning published requirements. Titanium"' PSU-30 shall be back -nailed
max. G" o.c. with 12 ga. galvanized annular rink shank nails through 32 ga., 1-5/8-inch diameter tin caps in
accordance with Owens Corning published installation requirements.
Refer to Table 1A for allowable tile adhesives.
Refer to Section 5.6.1 for wind uplift limitations.
Refer to Section 5.8 for tile staging limitations.
6.5 Titanium 2-Ply System:
6.5.1 The Titanium 2-Ply System consists of a base layer of Titanium UDL-30 (top -surface primed or sheet inverted)
mechanically attached to the wood roof deck followed by Titanium PSU-30, self -adhered.
6.5.2 Non -Tile Applications:
Install Titanium UDL-30 (top surface primed or sheet inverted) in accordance with Section 6.3 followed by Titanium
PSU-30 in accordance with Section 6.4.
NEMO ETC, LLC Evaluation Report 111980.11.08-R11
Certi�cateofAuthorizat;on#32455 67" EDITION (2017) FBC NON-HVHZ EVALUATION FL11602-R10
Titanium Roof Underlayments Revision 11:10/1712019
Page 7 of 8
NNEMO 1 etc.
6.5.3 Nail -On Tile Applications;
For nail -on tile installations, install Titanium UDL-30 (top surface primed or sheet inverted) in accordance with
FRSA/TRI April 2012 (04-12), using Section 6.3 as a guide, and considering the wider sheet width relative to ASTM
D226 felt. Then apply Titanium PSU-30 in accordance with Section 6.4.
Refer to Section 5.8 for the staging limitations.
6.5.4 Foam -On Tile Applications:
For foam -on the installations, install Titanium UDL-30 (top surface primed or sheet inverted) in accordance with
Section 5.6.1 herein. Then apply Titanium PSU-30 in accordance with Section 6.4
Refer to Table 1A for allowable tile adhesives.
Refer to Section 5.6.1 for wind uplift limitations.
Refer to Section 5.8 for tile staging limitations.
BUItDING PERMIT REQUIREMEIM'
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of
this product.
MANUFACTURINGPLANTS-
Contact the manufacturer or the named Q4 entity for plants covered under Rule 61G20-3 QA requirements. Refer
to Section 4 herein for product & production locations having met codified physical properties specifications.
IF
Intertek Testing Services NA Inc. -- QUA1673; (604) 520-3321
- END OF EVALUATION REPORT -
MEMO ETC, LLC Evaluation Report 111980.11.08-R11
Certificare ofAutthorization #1324SS 6T" EDITION (2017) FBC NON-KVHZ EVALUATION FL11602-R10
Ttanium Roof underiayments Revision 11: 20/27/2019
Page 8 of 8