HomeMy WebLinkAbout4003 AVENUE R PERMIT NUM 2009-0297 005 REVISED 09/18/20lt2r�/'J�29�
APPROVED ASSEMBLIES:
Deck Type H: Wood, Insulates
Deck Description: Min 19/32" thick
System Type A(1): Anchor sheet m
All General and System Limitations ap
One or more layers of any of the followir
Base Insulation Laver
H-Shield
Minimum 1.5" thick
Ton Insulation Laver
DensDeck
Minimum'/4" thick
Note: Base insulation layer shall be
Foamable Adhesive spaced 4" o.c. Tol
WeatherTite One Step Foamable Adhe
for insulation attachment.
Anchor Sheet:
One ply of All
Fastening:
Anchor sheet A
and 8" o.c. in th
Primer:
Apply Flint-Prit
Base Sheet:
One or more la}
Membrane:
One layer of Fli
Flintlastic SA C
Surfacing:
None
Maximum Design
Pressure:
-52.5 psf(See C
CMIAMI-DADE COUNTY
at max 24" spans attached 6" o.c. using 8d diameter ring shank nails.
ly fastened, optional top layer adhered with approved adhesive
k insulations.
Insulation Fasteners Fastener
Table 3 Density/ft2
N/A N/A
Insulation Fasteners Fastener
Table 3 Density/W
N/A N/A
adhered with TITESET Roofing Adhesive or WeatherTite One Step
layer of insulation shall be adhered with TITESET Roofing Adhesive or
ve spaced 6" o.c. Please refer to Roofing Application Standard RAS 117
ether/ Empire Base Sheet mechanically attached as detailed below.
be fastened with FBC HVHZ nails and tin caps spaced 8" o.c. at the 3" lap
, equally spaced center rows.
SA to DensDeck surface at 0.3 gal/square.
of Flintlastic SA P1yBase, self -adhered. J
tstic SA Cap, Flintlastic SA Cap FR, Flintlastic SA Cap FR CoolStar,
CoolStar self -adhered.
1 Limitation #7.)
NOA No.: 15-0108.03
Expiration Date: 04/13/20
Approval Date: 04/09/15
Page 5 of 13