HomeMy WebLinkAboutEvaluation ReportDIVISION: 08 00 00—OPENINGS
SECTION: 08 95 43--VENTS/FOUNDATION FLOOD VENTS
REPORT HOLDER:
FLOOD FLAPS®, LLC
POST OFFICE BOX 1003
ISLE OF PALMS, SOUTH CAROLINA 29451
EVALUATION SUBJECT:
FLOOD FLAPS' AUTOMATIC FLOOD VENTS:
MODELS FFWF12; FFNF12; FFWF08; FFNF08; FFWFOS;F NW
icc Icc Icc
c C
PMG LISTED
Look for the trusted marks of Conformity!
"2014 Recipient of Prestigious Western States Seismic Policy Council
(WSSPQ Award in Excellence"
A Subsidiary of
ICGESEvaluation Reports are not to be construed as representing aesthetics or any other. attributes not c
specifically addressed, nor are they to be construed as an endorsement of the subject of the report or a t
recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as ' ' ' na
19MEC 17WS
to any, finding or other matter in this report, or as to any product covered by the report. Pralal Cw'-"*n Body AearWltiO !N
NIWD
Copyright 0 2017 ICC Evaluation Service, U.C. All rights reserved.
hbK-Jbt1V l Most Widely Aeceptt r'-_ y Trusted Page 2 of 3
l
■-With a • minimum of one FV for every 220 square 5.2 The Flood F'iaps automatic FVs must not be used in
feet (20 m') of enclosed area. place of "breakaway walls" in coastal high hazard
■ Below the base flood elevation. areas, but are permitted for use in conjunction with
breakaway walls In other areas.
■ With the bottom of the FV located a maximum of 8 D EVIDENCE SUBMITTED
12 inches (305 mm) above grade.
5.0 CONDITIONS OF USE
The Flood Flaps° automatic flood vents described in this
report comply with, or are suitable alternatives to what is
specified In, those codes listed in Section 1.0 of this report,
subject to the following conditions:
5.1 The Flood ;Flaps® automatic FVs must be inst ailed in
accordance with this report, the applicable code and
the manufacturer's installation instructions. In the
event of a conflict, the instructions in this report
govern.
Data in accordance with the ICC-ES Acceptance Criteria
for Mechanically Operated Flood Vents (AC364), dated
August 2015.
7.0 IDENTIFICATION
The Flood Flaps° models recognized in this report are
identified by a label bearing the manufacturer's name,
the model number, and the evaluation report number
(ESR-3560).
TABLE 1--FLOOD FLAP AUTOMATIC FLOOD VENT MODEL SIZES
MODEL
NUMBER
MODEL
DESIGNATION
ROUGH OPENING
(Width X Height)
(inches)
VENT SIZE
(W X H X D)
(inches)
ENCLOSED AREA
COVERAGE
(fe)
NET FREE AREA
OPENING�
(in)
FFWF12
Sealed Series
16 8
15'/g X /4 X 12
220
NA
FFNF12
Multi -Purpose
16 x 8
15 /6 X 7 t, X 12
220
37
FFWF08
Sealed Series
16 x 8
15 /s x 7 (, x 8
220
NA
FFNF08
Multi -Purpose
16 x 8
15 /e x 7 (d x 5
220
37
FFWF05
Sealed Series
16 x 8
151B x 714 x 5
220
NA
1=FNF0
16 c:8,
15 /s.x7lq,x5x
_
For SI: 1 inch = 25.4 mm; 1 f = 0.093 m
'For under -floor ventilation only.
r:.9M1M0M0P---
DIVISION: 08 00 00—OPENINGS
SECTION: 08 95 43—VENTS/FOUNDATION FLOOD VENTS
REPORT HOLDER:
SMARTVENT PRODUCTS, INC.
430 ANDBRO DRIVE, UNIT 1
PITMAN, NEW JERSEY 08071
EVALUATION SUBJECT:
SMART VENT® AUTOMATIC FOUNDATION FLOOD VENTS: MODELS # 5.40 -It I
#1540-521; #1540-510; #1540-511; #1540-570; #1540-574; #1540-524; #1540-514
ICC ICC ICC
C PMG C LISTED
Look for the trusted marks of Conformity!
dt�
"2014 Recipient of Prestigious Western States Seismic Policy Council ■��
(WSSPC) Award in Excellence" A Subsidiary of ODECDUNGC
ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not �� Sam 1ed
specifically addressed, nor are they to be construed as an endorsement of the subject of the report or a l
recommendation for its use. There is no warranty by ICC Evaluation Seri,ice, LLC, express or implied, as "
GO
)STEC 1700
to any finding or other matter in this report, or as to any product covered by the report. I.d.d Ce f;ti�ticn 9oEy „u ccN
zt000
Copyright ° 2017 ICC Evaluation Service, LLC. All rights reserved.
ESR-2074 I Most Widely Accepted and Trusted Page 2 of 5
installed with a minimum of one FV for every 5.2 The Smart Vent® FVs must not be used in the place
400 square feet (37.2 m2) of enclosed area. of "breakaway walls" in coastal high hazard areas, but
■ Below the base flood elevation. are permitted for use in conjunction with breakaway
walls in other areas.
■ With the bottom of the FV located a maximum of
12 inches (305.4 mm) above the higher of the final
grade or floor and finished exterior grade immediately
under each opening.
5.0 CONDITIONS OF USE
The Smart Vent® FVs described in this report comply with,
or are suitable alternatives to what is specified in, those
codes listed in Section 1.0 of this report, subject to the
following conditions:
5.1 The Smart Vent° FVs must be installed in accordance
with this report, the applicable code and the
manufacturer's installation instructions. In the event of
a conflict, the instructions in this report govern.
6.0 EVIDENCE SUBMITTED
Data in accordance with the ICC-ES Acceptance Criteria
for Mechanically Operated Flood Vents (AC364), dated
August 2015.
7.0 IDENTIFICATION
The Smart VENT' models recognized in this report must
be identified by a label bearing the manufacturer's name
(Smartvent Products, Inc.), the model number, and the
evaluation report number (ESR-2074).
TABLE 1—MODEL SIZES
MODEL NAME
MODEL NUMBER
MODEL SIZE (in.)
COVERAGE (sq. ft )
SmartVENT'
1540-510
153/4" X 73/41,
�200
FloodVENT° Overhead Door
1540-524
153/4" X 73/4"
200
SmartVENT® Overhead Door
1540-514
153/4., X 73/4"
200
Wood Wall FloodVENT°
1540-570
14" X 83/4"
200
Wood Wall FloodVENT° Overhead Door
1540-574
14" X 83/41,
200
SmartVENTO Stacker
1540-511
16" X 16"
400
FloodVent® Stacker
1540-521
16" X 16"
400
For SI: 1 inch = 25.4 mm; 1 square foot = m`