The URL can be used to link to this page

Home My WebLink AboutAPPROVED, Metal Chanel NOA BCIS Home Log In User Registration Hot Topics Submit Surcharge Stats & Facts Publications Contact Us BCIS Site Map Links Search Product Approval USER: Public User Product Approval Menu > Product or Application Search > Application List > Application Detail FL #FL5374-R5 Application Type Affirmation Code Version 2017 Application Status Approved Comments Archived Product Manufacturer East Coast Metals, Inc. Address/Phone/Email 2301 West 8 Lane Hialeah, FL 33010 (305) 885-9991 acastellanos@eastcoast-metals.com Authorized Signature Tom Castellanos acastellanos@eastcoast-metals.com Technical Representative Tom Castellanos Address/Phone/Email 2301 West 8 Lane Hialeah, FL 33010 (305) 885-9991 tcastellanos@eastcoast-metals.com Quality Assurance Representative Howard Callender Jr. Address/Phone/Email 2301 West 8 Lane Hialeah, FL 33010 (305) 885-9991 hcallender@eastcoast-metals.com Category Roofing Subcategory Roofing Accessories that are an Integral Part of the Roofing System Compliance Method Evaluation Report from a Florida Registered Architect or a Licensed Florida Professional Engineer Evaluation Report - Hardcopy Received Florida Engineer or Architect Name who developed the Evaluation Report Robert Nieminen Florida License PE-59166 Quality Assurance Entity Architectural Testing, Inc., an Intertek Company Quality Assurance Contract Expiration Date 12/31/2020 Validated By John W. Knezevich, PE Validation Checklist - Hardcopy Received Certificate of Independence FL5374_R5_COI_2015_01_COI_Nieminen.pdf Referenced Standard and Year (of Standard)Standard Year FRSA/TRI April 2012 (04-12)2012 RAS 118 1995 RAS 119 1995 RAS 120 1995 SBCCI SSTD 11 1997 TAS 101 1995 Equivalence of Product Standards Certified By Sections from the Code I affirm that there are no changes in the new Florida Building Code which affect my product(s) and my product(s) are in compliance with the new Florida Building Code. Documentation from approved Evaluation or Validation Entity Yes No N/A FL5374_R5_COC_2017_09_AFFIRMATION_ECM_FL5374_6th Edition (2017).pdf Product Approval Method Method 1 Option D Date Submitted 09/06/2017 Date Validated 09/06/2017 Date Pending FBC Approval Date Approved 09/10/2017 Summary of Products FL #Model, Number or Name Description 5374.1 East Coast Metals Channel Metals Preformed metal channels designed for use as a hip & ridge base to which roof tiles are bonded. Limits of Use Approved for use in HVHZ: Yes Approved for use outside HVHZ: Yes Impact Resistant: N/A Design Pressure: +N/A/-178 Other: 1.) Refer to Evaluation Report Sections 5.2 and 5.3 for Limits of Use in HVHZ and non-HVHZ jurisdictions, respectively. 2.) The design pressure herein pertains to use in non-HVHZ jurisdictions in conjunction with Table 1A of FRSA/TRI April 2012 (04-12). Refer to Tables 2A and 2B in the Evaluation Report for all options and associated allowable design pressures. Installation Instructions FL5374_R5_II_2015_03_FINAL_ER_ECM Trim Lock_FL5374- R4.pdf Verified By: Robert Nieminen PE-59166 Created by Independent Third Party: Yes Evaluation Reports FL5374_R5_AE_2015_03_FINAL_ER_ECM Trim Lock_FL5374- R4.pdf Created by Independent Third Party: Yes Back Next Contact Us :: 2601 Blair Stone Road, Tallahassee FL 32399 Phone: 850-487-1824 The State of Florida is an AA/EEO employer. Copyright 2007-2013 State of Florida. :: Privacy Statement :: Accessibility Statement :: Refund Statement Under Florida law, email addresses are public records. If you do not want your e-mail address released in response to a public-records request, do not send electronic mail to this entity. Instead, contact the office by phone or by traditional mail. If you have any questions, please contact 850.487.1395. *Pursuant to Section 455.275(1), Florida Statutes, effective October 1, 2012, licensees licensed under Chapter 455, F.S. must provide the Department with an email address if they have one. The emails provided may be used for official communication with the licensee. However email addresses are public record. If you do not wish to supply a personal address, please provide the Department with an email address which can be made available to the public. To determine if you are a licensee under Chapter 455, F.S., please click here . Product Approval Accepts: EXTERIOR RESEARCH & DESIGN, LLC. Certificate of Authorization #9503 353 CHRISTIAN STREET, UNIT #13 OXFORD, CT 06478 PHONE: (203) 262-9245 FAX: (203) 262-9243 EVALUATION REPORT East Coast Metals, Inc. 2301 West 8 Lane Hialeah, FL 33010 Evaluation Report E10240.08.08-R4 FL5374-R4 Date of Issuance: 09/03/2008 Revision 4: 03/17/2015 SCOPE: This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen, P.E. for use of the product under the Florida Building Code and Florida Building Code, Residential Volume. The products described herein have been evaluated for compliance with the 5th Edition (2014) Florida Building Code sections noted herein. DESCRIPTION: East Coast Metals Channel Metals LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted herein. CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced Quality Assurance documentation changes, or provisions of the Code that relate to the product change. Acceptance of this Evaluation Report by the named client constitutes agreement to notify Robert Nieminen, P.E. if the product changes or the referenced Quality Assurance documentation changes. Trinity|ERD requires a complete review of this Evaluation Report relative to updated Code requirements with each Code Cycle. ADVERTISEMENT: The Evaluation Report number preceded by the words “Trinity|ERD Evaluated” may be displayed in advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its entirety. INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or its distributors and shall be available for inspection at the job site at the request of the Building Official. This Evaluation Report consists of pages 1 through 7. Prepared by: Robert J.M. Nieminen, P.E. Florida Registration No. 59166, Florida DCA ANE1983 The facsimile seal appearing was authorized by Robert Nieminen, P.E. on 03/17/2015. This does not serve as an electronically signed document. Signed, sealed hardcopies have been transmitted to the Product Approval Administrator and to the named client CERTIFICATION OF INDEPENDENCE: 1. Trinity|ERD does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or distributing products it evaluates. 2. Trinity|ERD is not owned, operated or controlled by any company manufacturing or distributing products it evaluates. 3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufa cturing or distributing products for which the evaluation reports are being issued. 4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval proc ess of the product. 5. This is a building code evaluation. Neither Trinity|ERD nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained specifically for that purpose. Exterior Research and Design, LLC. Evaluation Report E10240.08.08-R4 Certificate of Authorization #9503 FL5374-R4 Revision 4: 03/17/2015 Page 2 of 7 ROOFING COMPONENT EVALUATION: 1. SCOPE: Product Category: Roofing Sub-Category: Roofing Accessories that are an Integral Part of the Roofing System Compliance Statement: East Coast Metals Channel Metals, as produced by East Coast Metals, have demonstrated compliance with the following sections of the Florida Building Code through testing in accordance with the following Standards. Compliance is subject to the Installation Requirements and Limitations / Conditions of Use set forth herein. 2. STANDARDS: Section Property Standard Year 1507.3.7 Installation, non-HVHZ FRSA/TRI April 2012 (04-12) 2012 1518.8.1 Installation, HVHZ RAS 118, 119 & 120 1995 1523.6.5.2.2 Static Uplift Resistance TAS 101 1995 1711.2.1 Static Uplift Resistance SBCCI SSTD 11 1997 3. REFERENCES: Entity Examination Reference Date ERD (TST6049) Static Uplift Resistance E42730.08.13 08/23/2013 ERD (TST6049) Static Uplift Resistance ECM-SC6795.12.14-1 02/27/2015 ERD (TST6049) Static Uplift Resistance ECM-SC6795.12.14-2 02/27/2015 Florida TEC (TST7393) TAS 101 S10-628R 10/27/2010 PRI (TST5878) TAS 101 ECM-001-02-01 09/21/2001 PRI (TST5878) TAS 101 ECM-003-02-01 06/13/2008 PRI (TST5878) TAS 101 ECM-004-02-01 06/13/2008 PRI (TST5878) TAS 101 ECM-005-02-01 06/13/2008 PRI (TST5878) TAS 101 ECM-006-02-01 06/13/2008 PRI (TST5878) TAS 101 ECM-007-02-01 06/13/2008 PRI (TST5878) TAS 101 ECM-008-02-01 06/13/2008 Florida Building Code Attachment Requirements FRSA/TRI April 2012 (04-12) 04/2012 Florida Building Code - HVHZ Attachment Requirements RAS 118, 119 and 120 1995 East Coast Metals Metal Quality Mill Certifications Various Architectural Testing (QUA1844) Quality Control Participation Letter Exp. 12/31/2018 4. PRODUCT DESCRIPTION: 4.1 Hip & Ridge Channel Metal: Pre-formed metal channel designed for use as a hip and ridge base to which roof tiles are bonded in FBC Approved roof tile adhesive. Hip & Ridge Channel Metal is available in 119-3/8-inch (+ 3/8-inch) length by 2.5, 3, 3.5, 4, 5, 6 or 7-inch (+ 3/8-inch) heights with 1.5-inch (+ 1/16-inch) deck-flanges. Exterior Research and Design, LLC. Evaluation Report E10240.08.08-R4 Certificate of Authorization #9503 FL5374-R4 Revision 4: 03/17/2015 Page 3 of 7 4.2 Trim Lock Channel Metal: Pre-formed metal channel designed for use as a hip and ridge base to which roof tiles are bonded in FBC Approved roof tile adhesive. Trim Lock Channel Metal is characterized by its profiled and perforated upper horizontal flange designed to receive and allow for interlock with the overlying tile adhesive. Trim Lock Channel Metal is available in 119-3/8-inch (+ 3/8”) length by 3, 3.5, 4, 5 or 6-inch (+ 3/8-inch) heights with 1.5-inch (+ 1/16-inch) deck-flanges. 4.2 Trim Lock Plus Channel Metal: Pre-formed metal channel designed for use as a hip and ridge base to which roof tiles are bonded in FBC Approved roof tile adhesive. Trim Lock Plus Channel Metal is characterized by its profiled and perforated upper horizontal flange designed to receive and allow for interlock with the overlying tile adhesive and its perforated deck flanges, designed for installation atop the roof underlayment via placement in FBC Approved roof tile adhesive, which flows-through and interlocks with the underlying adhesive. Trim Lock Plus Channel Metal is available in 119-3/8-inch (+ 3/8”) length by 3, 3.5, 4, 5 or 6-inch (+ 3/8-inch) heights with 1.5-inch (+ 1/16-inch) deck-flanges. 4.4 East Coast Metals Channel Metals are fabricated of the following metals:  Galvanized Steel: Min. 0.019 + 0.002-inch, ASTM A653 (G-90), min. 33 KSI.  Galvalume Steel: Min. 0.019 + 0.002-inch, ASTM A792, AZ55, min. 35 KSI.  Aluminum: Min. 0.032 + 0.002-inch, ASTM B209, 3003-H14, min. 21 KSI.  Stainless Steel: Min. 0.019 + 0.002-inch, ASTM A240/A480, T304, min. 35 KSI. 5. LIMITATIONS: 5.1 This is a building code evaluation. Neither Trinity|ERD nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained specifically for that purpose. Exterior Research and Design, LLC. Evaluation Report E10240.08.08-R4 Certificate of Authorization #9503 FL5374-R4 Revision 4: 03/17/2015 Page 4 of 7 5.2 FOR HVHZ JURISDICTIONS: 5.2.1 For Hip & Ridge Channel Metal or Trim Lock Channel Metal, refer to FBC RAS 118, Drawing 13, Detail 3; RAS 119, Drawing 12, Detail 3; or RAS 120, Drawing 15, Detail 3. For Trim Lock Plus Channel Metal, refer to the installation instructions herein. 5.2.2 For HVHZ jurisdictions, installations of Hip & Ridge Channel Metal and Trim Lock are prescriptive by RAS 118, 119 and 120, and the data in Tables 1A and 1B is supplemental to these prescriptive allowances. Installations of Trim Lock Plus are limited to projects having a required moment resistance (Mr) or uplift resistance (Fr), as determined in accordance with RAS 127, not greater than the following values. Refer to the tile adhesive manufacturer’s published installation instructions for adhesive paddy placement details.  “INDEPENDENT” paddy placement means each individual tile is bonded to the Channel Metal in its own, single foam paddy; tile head laps are not bonded. This method is limited to 2-part tile adhesives. Allowable performance data below for “INDEPENDENT” paddy placement already has a 2 to 1 margin of safety applied to ultimate performance.  “INTERDEPENDENT” paddy placement means each individual tile is bonded to the Channel Metal in a foam paddy, and a second foam paddy bonds the tile head lap, or two tiles are bonded t o the Channel Metal using a single foam paddy. Allowable performance data below for “INTERDEPENDENT” paddy placement already has a 4 to 1 margin of safety applied to ultimate performance. TABLE 1A: PERFORMANCE LIMITATIONS - HVHZ, INDEPENDENT PADDY PLACEMENT (2 TO 1 MARGIN OF SAFETY ALREADY APPLIED) Hip/Ridge Metal Tile Adhesive Allowable Performance Design Metal Type Type Placement Moment Based Mf (ft-lbf) Uplift Based F’ (lbf) Hip & Ridge Channel Metal galvanized clay or concrete 3M™ 2-Component Foam Roof Tile Adhesive AH-160 Independent 127 169 Trim Lock galvanized, Galvalume®, aluminum or stainless steel clay or concrete 3M™ 2-Component Foam Roof Tile Adhesive AH-160 Independent 171 159 Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete 3M™ 2-Component Foam Roof Tile Adhesive AH-160 Independent 177 165 TABLE 1B: PERFORMANCE LIMITATIONS - HVHZ, INTERDEPENDENT PADDY PLACEMENT (4 TO 1 MARGIN OF SAFETY ALREADY APPLIED) Hip/Ridge Metal Tile Adhesive Allowable Performance Design Metal Type Type Placement Moment Based Mf (ft-lbf) Uplift Based F’ (lbf) Trim Lock or Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete 3M™ 2-Component Foam Roof Tile Adhesive AH-160 Interdependent 95 88 Trim Lock galvanized, Galvalume®, stainless steel clay or concrete 3M™ Roof Tile Adhesive RTA-1 Interdependent 99 94 Trim Lock aluminum clay or concrete 3M™ Foam Roof Tile Adhesive RTA-1 Interdependent 90 84 Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete 3M™ Foam Roof Tile Adhesive RTA-1 Interdependent 90 84 Trim Lock galvanized, Galvalume® or stainless steel clay or concrete TILE BOND™ Roof Tile Adhesive Interdependent 123 117 Trim Lock aluminum clay or concrete TILE BOND™ Roof Tile Adhesive Interdependent 79 73 Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete TILE BOND™ Roof Tile Adhesive Interdependent 79 73 Trim Lock galvanized, Galvalume® or stainless steel clay or concrete Touch ‘n Seal StormBond Roof Tile Adhesive Interdependent 146 139 Trim Lock Aluminum clay or concrete Touch ‘n Seal StormBond Roof Tile Adhesive Interdependent 58 54 Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete Touch ‘n Seal StormBond Roof Tile Adhesive Interdependent 58 54 Exterior Research and Design, LLC. Evaluation Report E10240.08.08-R4 Certificate of Authorization #9503 FL5374-R4 Revision 4: 03/17/2015 Page 5 of 7 5.3 FOR NON-HVHZ JURISDICTIONS: 5.3.1 For Hip & Ridge Channel Metal or Trim Lock Channel Metal, refer to FRSA/TRI April 2012 (04-12). For Trim Lock Plus Channel Metal, refer to the installation instructions herein 5.3.2 For non-HVHZ, installations are limited to projects having hip and ridge design pressure requirements, determined in accordance with Table 1A of FRSA/TRI April 2012 (04-12), not greater than the following values. Refer to the tile adhesive manufacturer’s published installation instructions for adhesive paddy placement details.  “INDEPENDENT” paddy placement means each individual tile is bonded to the Channel Metal in its own, single foam paddy; tile head laps are not bonded. This method is limited to 2-part tile adhesives. This method is limited to 2-part tile adhesives. Allowable performance data below for “INDEPENDENT” paddy placement already has a 2 to 1 margin of safety applied to ultimate performance.  “INTERDEPENDENT” paddy placement means each individual tile is bonded to the Channel Metal in a foam paddy, and a second foam paddy bonds the tile head lap, or two tiles are bonded to the Channel Metal using a single foam paddy. Allowable performance data below for “INTERDEPENDENT” paddy placement already has a 4 to 1 margin of safety applied to ultimate performance. TABLE 2A: PERFORMANCE LIMITATIONS – NON-HVHZ, INDEPENDENT PADDY PLACEMENT (2 TO 1 MARGIN OF SAFETY ALREADY APPLIED) Hip/Ridge Metal Tile Adhesive Allowable Uplift (psf) Design Metal Type Type Placement Hip & Ridge Channel Metal galvanized clay or concrete 3M™ 2-Component Foam Roof Tile Adhesive AH-160 Independent 169 Trim Lock galvanized, Galvalume®, aluminum or stainless steel clay or concrete 3M™ 2-Component Foam Roof Tile Adhesive AH-160 Independent 173 Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete 3M™ 2-Component Foam Roof Tile Adhesive AH-160 Independent 178 TABLE 2B: PERFORMANCE LIMITATIONS – NON-HVHZ, INTERDEPENDENT PADDY PLACEMENT (4 TO 1 MARGIN OF SAFETY ALREADY APPLIED) Hip/Ridge Metal Tile Adhesive Allowable Uplift (psf) Design Metal Type Type Placement Trim Lock or Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete 3M™ 2-Component Foam Roof Tile Adhesive AH-160 Interdependent 98 Trim Lock galvanized, Galvalume® or stainless steel clay or concrete 3M™ Foam Roof Tile Adhesive RTA-1 Interdependent 110 Trim Lock aluminum clay or concrete 3M™ Foam Roof Tile Adhesive RTA-1 Interdependent 93 Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete 3M™ Foam Roof Tile Adhesive RTA-1 Interdependent 93 Trim Lock galvanized, Galvalume® or stainless steel clay or concrete TILE BOND™ Roof Tile Adhesive Interdependent 152 Trim Lock aluminum clay or concrete TILE BOND™ Roof Tile Adhesive Interdependent 82 Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete TILE BOND™ Roof Tile Adhesive Interdependent 82 Trim Lock galvanized, Galvalume® or stainless steel clay or concrete Touch ‘n Seal StormBond Roof Tile Adhesive Interdependent 148 Trim Lock Aluminum clay or concrete Touch ‘n Seal StormBond Roof Tile Adhesive Interdependent 61 Trim Lock Plus galvanized, Galvalume®, aluminum or stainless steel clay or concrete Touch ‘n Seal StormBond Roof Tile Adhesive Interdependent 61 Exterior Research and Design, LLC. Evaluation Report E10240.08.08-R4 Certificate of Authorization #9503 FL5374-R4 Revision 4: 03/17/2015 Page 6 of 7 6. INSTALLATION: 6.1 The roof deck shall be minimum 15/32-inch plywood (non-HVHZ) or minimum 19/32-inch plywood (HVHZ) attached in accordance with FBC Chapter 23 to the satisfaction of the AHJ. 6.2 Hip & Ridge Channel Metal and Trim Lock Channel Metal shall be installed using min. 11 ga. x 1¼-inch long x 3/8-inch head diameter galvanized annular ring shank nails spaced 6-inch o.c. along both deck-flanges. Fasteners shall be positioned ¾-inch from the outside edge of each deck-flange, set in a bed plastic roof cement. For FBC HVHZ, refer to FBC RAS 118, Drawing 13, Detail 3; RAS 119, Drawing 12, Detail 3; or RAS 120, Drawing 15, Detail 3. 6.3 Trim Lock Plus Channel Metal shall be installed atop the Approved roof underlayment in continuous 2-inch wide ribbons of tile adhesive centered beneath each 1.5-inch wide deck flange. Place the Trim Lock Plus Channel Metal into the wet adhesive and allow it to set-up prior to installation of roof tiles. View of Polyset AH160 Placement for Trim Lock Plus Channel Metal Installation 6.3.1 It is critical that the bond between the Trim Lock Plus Channel Metal, the tile adhesive and the underlayment is not disturbed prior to or during placement of the ridge tiles. 6.3.2 Approved underlayments are the codified ‘30/90’ system or other FBC Approved roof underlayments listing approved use of the subject tile adhesive. Exterior Research and Design, LLC. Evaluation Report E10240.08.08-R4 Certificate of Authorization #9503 FL5374-R4 Revision 4: 03/17/2015 Page 7 of 7 6.4 Tile shall be installed atop the Channel Metal in accordance with the tile adhesive manufacturer’s Approved, published installation instructions, subject to the limitations outlined in Section 5 herein. The exposed edges shall be packed and pointed with Approved mortar or weather blocking adhesive in accordance with FRSA/TRI April 2012 (04-12) or RAS 118, RAS 119, RAS 120 requirements. View of Trim Lock Plus Channel Metal Installation after Weather Blocked 6.4.1 Channel Metal shall be free of dust, debris, oils or other bond-breaking substance prior to placement of adhesive. 7. BUILDING PERMIT REQUIREMENTS: As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the installation of this product. 8. MANUFACTURING PLANTS: Contact the named QA entity for manufacturing facilities covered by F.A.C. Rule 61G20-3 QA requirements. 9. QUALITY ASSURANCE ENTITY: Architectural Testing, Inc. – QUA1844; (717) 764-7700 - END OF EVALUATION REPORT - Hip / Ridge Tile Tile Adhesive Trim Lock Plus Mortar or Weather Block Adhesive Tile Adhesive