HomeMy WebLinkAboutCWS-8800-EVAL REPORT-FL20834.31/15/2020
Lucas A. Turner, P.E.
FL PE #58201
Evaluation Report 1148
January 15, 2020
Product Description:Series 880 Vinyl Sliding Glass Door,non-impact,5’ nominal panel widths, 96”
door heights, with design pressures of +/-80 psf (additional comparative analysis pressures included in
installation drawing), with heavy panel reinforcement required as shown in CWS-1148
Manufacturer:Custom Window Systems, Inc. 1900 SW 44th Ave, Ocala, FL 34474
Statement of Compliance:This report evaluates the above-listed product per the requirements of FAC
Product Approval Rule Chapter 61G20-3.005 (4). This product complies with the requirements of the 6th
Edition (2017) Florida Building Code outside the High Velocity Hurricane Zone. The product testing
standards performed are outlined below.
Technical Documentation:
1)This report, prepared by Lucas A. Turner, P.E., at 1239 Jabara Ave., North Port, FL
2)Approval drawing CWS-1148, signed and sealed by Lucas A. Turner, P.E. on 7/6/2016
3)Keystone Certifications CAR document 138-1399.0
4)Test Reports F1575.04/14-401-44, from Intertek/ATI,Tampa, FL, and CWS-010-02-03/04, by
PRI Construction Materials Technologies, Tampa, FL, with testing performed:
AAMA/WDMA/CSA 101/I.S.2/A440-2011
5)Supplemental Calcs.to support CWS-1148, signed and sealed by Lucas A. Turner, P.E.
Installation:Units must be installed according to approval document CWS-1148.
Limitations of Use:This product:
May be used in sizes, design pressures, and with max. glass DLO sizes as shown in CWS-1148
Is non-impact resistant and requires the use of shutters in windborne debris regions
May not be used in the High Velocity Hurricane Zone
Requires Fully Tempered Insulating Glass as shown in CWS-1148
Requires Vision Extrusions PVC frames with current listing as AAMA 303 Certified Profile
Licensee
Certification of Independence:I do not have, nor do I intend to acquire, nor will I acquire, a financial
interest in Custom Window Systems or in any company manufacturing or distributing products for which
this report is being issued. I do not have, nor do I intend to acquire, nor will I acquire, a financial interest
in any other entity involved in the testing or approval process of this product.
URNER
ENGINEERING &
CONSULTING, INC.T 2428 Old Natchez Trace Trail
Camden, TN 38320
Ph. 941-380-1574
FBPE C.O.A. #29779