HomeMy WebLinkAboutATRIUM CERT- 20100.2 FINCERTIFICATION NO: NI013111.17-R3
DATE: 04/11/2016
CERTIFICATION PROGRAM: Structural
COMPANY: Atrium
CODE: 2187-1
REVISION DATE: 04/22/2020
To verify that the “Notice of Product Certification” is valid, please visit www.NAMICertification.com to assure that the
product is active and currently listed. This certification represents product conformity to the applicable specification and
that certification criteria has been satisfied. A NAMI approved certification label must be applied to the product to claim
certification status. Please review and advise NAMI if any corrections are required to this document.
COMPANY NAME AND ADDRESS PRODUCT DESCRIPTION
Atrium Companies, Inc. Series “130"
300 Welcome Center Blvd. Vinyl Single Hung Window
Welcome, NC 27374 w/Fin Installation
Configuration: O/X
Glazing: Insulating Glass (Annealed)
Frame: W-1346mm(53") H-1956mm(77")
Sash: W-1292mm(50.88") H-881mm(37.5")
DLO: W-1226mm(48.25") H-883mm(34.75")
SPECIFICATION PRODUCT RATING
AAMA/WDMA/CSA 101/I.S.2/A440-08
AAMA/WDMA/CSA 101/I.S.2/A440-05
Class LC-PG50 1346 x 1956 (53 x 77)-H
H-LC50 1346 x 1956 (53 x 77)
Design Pressure: ±2400 Pa (50 psf)
Water Penetration Resistance Test Pressure: 360 Pa (7.52 psf)
Product Tested By: Architectural Testing, Inc.
Report No: D2322.01-801-47
Expiration Date:April 30, 2022
Administrator’s Signature:
NATIONAL ACCREDITATION AND
MANAGEMENT INSTITUTE, INC.
4794 George Washington Memorial Highway
Hayes, VA 23072
Tel: (804) 684-5124
Fax: (804) 684-5122
NOTICE OF PRODUCT CERTIFICATION