HomeMy WebLinkAboutPGT FD5555 20042705 (NEW) MIAMI-DADE MIAMI—DADE COUNTY,FLORIDA
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) 11805 SW 26 Street,Room 208
BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy
PGT Industries,Inc.
1070 Technology Drive
North Venice,FL 34275
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction
materials. The documentation submitted has been reviewed and accepted by Miami—Dade County RER—
Product Control Section to be used in Miami—Dade County and other areas where allowed by the Authority
Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami—Dade County Product
Control Section(In Miami—Dade County) and/or the AHJ(in areas other than Miami—Dade County)reserve
the right to have this product or material tested for quality assurance purposes. If this product or material
fails to perform in the accepted manner,the manufacturer will incur the expense of such testing and the AHJ
may immediately revoke, modify, or suspend the use of such product or material within their jurisdiction.
RER reserves the right to revoke this acceptance, if it is determined by Miami—Dade County Product
Control Section that this product or material fails to meet the requirements of the applicable building code.
This product is approved as described herein and has been designed to comply with the Florida Building
Code, including the High Velocity Hurricane Zone.
DESCRIPTION: Series"FD-5555"Outswing PVC French Door w/&w/o Sidelite and Transom—L.M.I.
APPROVAL DOCUMENT: Drawing No. MD-555.1 Rev D, titled "Vinyl French Door and SLT/ TR",
sheets 1 through 12 of 12, dated 05/07/13 and last revised on 04/20/20, prepared by manufacturer, signed
and sealed by Anthony Lynn Miller, P.E., bearing the Miami-Dade County Product Control Revision stamp
with the Notice of Acceptance number and expiration date by the Miami-Dade County Product Control
Section.
MISSILE IMPACT RATING: Large and Small Missile Impact Resistant
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state,
series, and following statement: "Miami—Dade County Product Control Approved", unless otherwise noted
herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been
no change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change
in the materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement
of any product, for sales, advertising or any other purposes shall automatically terminate this NOA. Failure
to comply with any section of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami—Dade County, Florida, and
followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is
displayed,then it shall be done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
This NOA revises NOA No. 18-1108.03 and consists of this page 1 and evidence pages E-1,E-2,E-3,E-4,
E-5 and 6, as well as approval document mentioned above.
The submitted documentation was reviewed by Ishaq I. Chanda,P.E.
MIAMI•DADE COUNTY NOA No.20-0427.05
•�gje �`� �� Expiration Date: January 23,2024
Approval Date: September 03,2020
Page 1
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
1. Evidence submitted under previous NOA
A. DRAWINGS
1. Manufacturer's die drawings and sections.
(Submitted under NOA No. 13-0815.03)
2. Drawing No. MD-555.1, titled "Vinyl French Door and SLT/TR", sheets I through 12
of 12, dated 05/07/13, with revision C dated 04/10/17, prepared by manufacturer,
signed and sealed by Anthony Lynn Miller, P.E.
B. TESTS
1. Test reports on: 1) Air Infiltration Test,per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94
4) Forced Entry Test,per FBC 2411.3.2.1, and TAS 202-94
5) Large Missile Impact Test per FBC, TAS 201-94
6) Cyclic Wind Pressure Loading per FBC, TAS 203-94
along with marked-up drawings and installation diagram of a Series FD-5570/FD-
2770 PVC double entrance outswing doors, prepared by Fenestration Testing
Laboratory, Inc., Test Report No. FTL-8717, dated I l/16/15, signed and sealed by
Idalmis Ortega, P.E.
(Submitted under previous NOA No. 16-0126.04)
2. Test reports on: 1) Air Infiltration Test,per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94
4) Forced Entry Test,per FBC 2411.3.2.1, and TAS 202-94
5) Large Missile Impact Test per FBC, TAS 201-94
6) Cyclic Wind Pressure Loading per FBC, TAS 203-94
along with marked-up drawings and installation diagram of a Series FD-5555/FD-
7700 PVC double entrance outswing doors, prepared by Fenestration Testing
Laboratory, Inc., Test Report No. FTL-8716, dated 11/12/15, signed and sealed by
Idalmis Ortega, P.E.
(Submitted under previous NOA No. 16-0126.04)
3. Test reports on: 1) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
2) Large Missile Impact Test per FBC, TAS 201-94
3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
along with marked-up drawings and installation diagram of a Series FD-5555/FD-
7700 PVC fixed sidelite,prepared by Fenestration Testing Laboratory, Inc., Test
Report No. FTL-8715, dated 11105115, signed and sealed by Idalmis Ortega, P.E.
(Submitted under previous NOA No. 16-0126.04)
1s�G7 1- L��n�k
Ishaq L Chanda,P.E.
Product Control Unit Supervisor
NOA No. 18-1108.03
Expiration Date: January 23,2024
Approval Date: September 03,2020
E-1
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
B. TESTS (CONTINUED)
4. Test reports on: 1) Air Infiltration Test,per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, Loading per FBC TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94
along with marked-up drawings and installation diagram of an outswing PVC French
door, prepared by Fenestration Testing Laboratory, Inc., Test Report No. FTL-7370,
dated 05/23/13, signed and sealed by Jorge A. Naya, Jr., P.E.
(Submitted under NOA No. 13-0815.03)
5. Test reports on: 1) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
2) Large Missile Impact Test per FBC, TAS 201-94
3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
along with marked-up drawings and installation diagram of an outswing Rigid PVC
French door, prepared by Fenestration Testing Laboratory, Inc., Test Report No.
FTL-7371, dated 05/25/13, signed and sealed by Jorge A. Naya, Jr., P.E.
(Submitted under NOA No. 13-0815.03)
6. Test reports on: 1) Air Infiltration Test,per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, Loading per FBC TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94
along with marked-up drawings and installation diagram of a PVC fixed window,
prepared by Fenestration Testing Laboratory, Inc., Test Report No. FTL-7338, dated
05/25/13, signed and sealed by Jorge A. Naya, Jr., P.E.
(Submitted under NOA No. 13-0815.03)
7. Test reports on: 1) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
2) Large Missile Impact Test per FBC, TAS 201-94
3) Cyclic Wind Pressure Loading per FBC, TAS 203-94
along with marked-up drawings and installation diagram of a Rigid PVC fixed
window,prepared by Fenestration Testing Laboratory, Inc., Test Report No.
FTL-7339, dated 05/23/13, signed and sealed by Jorge A. Naya, Jr., P.E.
(Submitted under NOA No. 13-0815.03)
C. CALCULATIONS
1. Anchor verification calculations and structural analysis, complying with FBC 51'
Edition (2014), dated 03/30/15, prepared by manufacturer, signed and sealed by
Anthony Lynn Miller, P.E. (Submitted under NOA No. 15-0409.03)
2. Glazing complies with ASTM E1300-09.
D. QUALITY ASSURANCE
1. Miami-Dade Department of Regulatory and Economic Resources (RER
1 st7 f • «y']J"
Ishaq L Chanda,P.E.
Product Control Unit Supervisor
NOA No.20-0427.05
Expiration Date: January 23,2024
Approval Date: September 03,2020
E-2
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
E. MATERIAL CERTIFICATIONS
1. Notice of Acceptance No. 16-1117.01 issued to Kuraray America, Inc. for their
"Trosifol® Ultraclear, Clear and Color PVB Glass Interlayers" dated 01/19/17,
expiring on 07/08/19.
2. Notice of Acceptance No. 14-0916.11 issued to Kuraray America,Inc. for their
"Kuraray SentryGlas® (Clear and White) Glass Interlayers" dated 06/25/15,
expiring on 07/04/18
3. Notice of Acceptance No. 14-0820.11 issued to Vision Extrusions Limited for their
"White Rigid PVC Exterior Extrusions for Windows and Doors", dated 11/06/14,
expiring on 09/30/19.
(Submitted under NOA No. 15-0409.03)
4. Notice of Acceptance No. 14-0820.12 issued to Vision Extrusions Limited for their
"Brown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions
for Windows and Doors", dated 11/06/14, expiring on 09/30/19.
(Submitted under NOA No. 15-0409.03)
5. Notice of Acceptance No. 13-1121.01 issued to Vision Extrusions Limited for their
series "VE 2000 Tan 202 and lighter shades (Non—White) Rigid Cellular PVC
Exterior Extrusions for Windows and Doors" dated 01/23/14, expiring on 01/23/19.
(Submitted under NOA No. 15-0409.03)
6. Notice of Acceptance No. 13-1121.02 issued to Vision Extrusions Limited for their
series "White Rigid Cellular PVC Exterior Extrusions for Windows and Doors"
dated 01/23/14, expiring on 01/23/19.
(Submitted under NOA No. 15-0409.03)
7. Notice of Acceptance No. 11-0902.10 issued to Vision Extrusions Limited for their
series "VE 1000 Tan 202 (Non-White) Rigid PVC Exterior Extrusions for
Windows and Doors" dated 12/29/11, expiring on 12/29/16.
(Submitted under previous NOA No. 15-0409.03)
8. Quanex Part Super Spacer Standard complying with ASTM C518 Thermal
Conductivity 0.881 BTU-in/ hr.-ft2-'F, ASTM F 1249 WVTR-Pass, ASTM D3985
Oxygen—Pass, ASTM E 2190 I.G. Durability-No Fog-Pass.
(Submitted under NOA No. 13-0815.03)
9. Quanex Part Duraseal complying with ASTM C518 Thermal Conductivity 2.22 BTU-
in/ hr.-ft2-°F, ASTM F 1249 WVTR-Pass, ASTM D 1434 Argon Permeance-Pass,
ASTM E 2189 I.G. Durability-No Fog, ASTM E 546 Dew Point Development -20°F
in 48 hrs.(Submitted under NOA No. 13-0815.03)
10. Vision Extrusions, Ltd. Parts complying with PVC-AAMA 303-13.
(Submitted under NOA No. 13-0815.03)
11. PVC-AAMA 303-13, Voluntary Specification for Rigid Polyvinyl Chloride (PVC)
Exterior Profiles for Vision Extrusions, Ltd.-VEX-1 by AAMA Fenestration Exterior
Profile Certification Program.(Submitted under NOA No. 13-081 c hI'
I st7 1 . L yn
Ishaq I.Chanda,P.E.
Product Control Unit Supervisor
NOA No.20-0427.05
Expiration Date: January 23,2024
Approval Date: September 03,2020
E-3
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
F. STATEMENTS
1. Statement letter of conformance, complying with FBC 51h Edition (2014) and FBC 61h
Edition (2017), dated 08/16/17, issued by manufacturer, signed and sealed by A. Lynn
Miller, P.E.
2. Statement letter of no financial interest, dated 04/28/17, issued by manufacturer,
signed and sealed by Anthony Lynn Miller, P.E.
3. Laboratory compliance letter for Test Reports No. FTL-7370, FTL-7371, FTL-7338
and FTL-7339, all issued by Fenestration Testing Laboratory, Inc., dated 05/23/13 and
05/25/13, all signed and sealed by Jorge A. Naya, Jr., P.E.
(Submitted under NOA No. 13-0815.03)
G. OTHERS
1. Notice of Acceptance No. 17-0504.05, issued to PGT Industries, Inc. for their Series
"FD-5555" Outswing PVC French Door w/ & w/o Sidelite and Transom - L.M.I., approved
on 12/14/17 and expiring on 01/23/19.
2. New Evidence Submitted
A. DRAWINGS
1. Drawing No. MD-555.1 Rev D, titled"Vinyl French Door and SLT/TR", sheets I
through 12 of 12, dated 05/07/13 and last revised on 04/20/20,prepared by
manufacturer, signed and sealed by Anthony Lynn Miller, P.E.
B. TESTS
1. Test reports on: 1) Air Infiltration Test,per FBC, TAS 202-94
2) Uniform Static Air Pressure Test, Loading per FBC, TAS 202-94
3) Water Resistance Test, per FBC, TAS 202-94
4) Large Missile Impact Test per FBC, TAS 201-94
5) Cyclic Wind Pressure Loading per FBC, TAS 203-94
6) Forced Entry Test,per ASTM F588 and TAS 202-94
along with marked-up drawings and installation diagram of all PGT Industries, Inc.
representative units listed below and tested to qualify Dowsil 791 and Dowsil 983 silicones,
prepared by Fenestration Testing Laboratory, Inc., Test Reports No.:
FTL-7897,PGT PW5520 PVC Fixed Window(unit 6 in proposal), dated 09/03/14
FTL-20-2107.1,PGT SGD780 Aluminum Sliding Glass Door(unit 7 in proposal) FTL-20-
2107.29 PGT CA740 Alum. Outswing Casement Window(unit 8 in proposal) FTL-20-
2107.3, PGT PW7620A Aluminum Fixed Window(unit 9 in proposal) and FTL-20-2107.4,
PGT PW7620A Aluminum Fixed Window (unit 10 in proposal) dated 07/13/20, all signed
and sealed by Idalmis Ortega, P.E.
C. CALCULATIONS
1. Anchor verification calculations and structural analysis, complying with FBC 7tn
Edition (2020), dated 04/20/20, prepared by manufacturer, signed and sealed by
Anthony Lynn Miller, P.E.
2. Glazing complies with ASTM El300-04, -09, -12 and -16.
Ishaq L Chanda,P.E.
Product Control Unit Supervisor
NOA No.20-0427.05
Expiration Date: January 23,2024
Approval Date: September 03,2020
E-4
PGT Industries,Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
D. QUALITY ASSURANCE
1. Miami-Dade Department of Regulatory and Economic Resources (RER).
E. MATERIAL CERTIFICATIONS
1. Notice of Acceptance No. 19-0305.02 issued to Kuraray America, Inc. for their
"Trosifol® Ultraclear, Clear, and Color PVB Glass Interlayers", expiring on
07/08/24.
2. Notice of Acceptance No. 17-0808.02 issued to Kuraray America, Inc. for their
"SentryGlas® (Clear and White) Glass Interlayers", expiring on 07/04/23.
3. Notice of Acceptance No. 18-1106.10 issued to Vision Extrusions Limited for their
"Brown Coated (Painted or Laminated) White Rigid PVC Exterior Extrusions
for Windows and Doors", expiring on 09/30/24.
4. Notice of Acceptance No. 18-1106.11 issued to Vision Extrusions Limited for their
series "VE 1000 Tan 202 and lighter shades (Non-White) Rigid Cellular PVC
Exterior Extrusions for Windows and Doors", expiring on 12/29/21.
5. Quanex Part Super Spacer Standard complying with ASTM C518 Thermal
Conductivity 0.881 BTU-in/ hr.-ft2-'F, ASTM F 1249 WVTR-Pass, ASTM D3985
Oxygen-Pass, ASTM E 2190 I.G. Durability-No Fog-Pass.
(Submitted under previous NOA No. 15-0409.05)
6. Quanex Part Duraseal complying with ASTM C518 Thermal Conductivity 2.22 BTU-
in/ hr.-ft2-°F, ASTM F 1249 WVTR-Pass, ASTM D 1434 Argon Permeance-Pass,
ASTM E 2189 I.G. Durability-No Fog, ASTM E 546 Dew Point Development -20°F
in 48 hrs.(Submitted under NOA No. 15-0409.05).
7. Vision Extrusions, Ltd. Parts complying with PVC-AAMA 303-13, Voluntary
Specification for Rigid Polyvinyl Chloride (PVC) Exterior Profiles for Vision
Extrusions, Ltd.-VEX-1 by AAMA Fenestration Exterior Profile Certification
Program. (Submitted under NOA No. 15-0409.05)
8. Vision Extrusions, Ltd. Parts complying with PVC-AAMA 303-13.
(Submitted under NOA No. 15-0409.05)
9. PVC-AAMA 303-13, Voluntary Specification for Rigid Polyvinyl Chloride (PVC)
Exterior Profiles for Vision Extrusions, Ltd.-VEX-1 by AAMA Fenestration Exterior
Profile Certification Program.
10. Notice of Acceptance No. 18-1217.14 issued to Energi Fenestration Solution, USA,
Inc. for their "Tan 3040 & light shade (non-white) White Rigid PVC Exterior
Extrusions for Windows and Doors", expiring on 02/04/21.
11. Notice of Acceptance No. 18-1217.14 issued to Energi Fenestration Solution, USA,
Inc. for their "Tan 3040 & light shade (non-white) White Rigid PVC Exterior
Extrusions for Windows and Doors", expiring on 02/04/21.
12. Notice of Acceptance No. 18-0122.02 issued to Energi Fenestration Solution, USA,
Inc, for their series "White Rigid PVC Exterior Extrusions for Windows and
Doors", expiring on 02/28/23.
13. Notice of Acceptance No. 20-0203.03 issued to Energi Fenestration Solution, USA,
Inc. for their "Bronze & light shade cap coated White Rigid PVC Exterior
Extrusions for Windows and Doors", expiring on 04/16/25.
Ishaq L Chanda,P.E.
Product Control Unit Supervisor
NOA No.20-0427.05
Expiration Date: January 23,2024
Approval Date: September 03,2020
E-5
PGT Industries, Inc.
NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED
F. STATEMENTS
1. Statement letter of conformance to FBC 7tn Edition (2020), dated 04/20/20, issued by
manufacturer, signed and sealed by Anthony Lynn Miller, P.E.
2. Statement letter of no financial interest and of independent, issued by manufacturer,
dated 04/18/20, signed and sealed by Anthony Lynn Miller, P.E.
3. Letter of lab compliance, part of the above test reports.
G. OTHERS
1. This NOA revises NOA# 18-1108.03 and updates to FBC 2020 (71 Edition), expiring
01/23/24.
2. RER Test proposals #19-1155 dated 01/10/20 approved by Ishaq 1. Chanda, P.E.
i �t"7 1 . L�'In-�-
Ishaq L Chanda,P.E.
Product Control Unit Supervisor
NOA No.20-0427.05
Expiration Date: January 23,2024
Approval Date: September 03,2020
E-6