HomeMy WebLinkAboutSpa Engineering DrawingZ
:3 M
2W0 2019
®-
THERM®SPAS
® 14TS DIAMOND
®ttROSS SECTION
LAYOUT
(441.96 cm)
49:75
aeHNOTE:
Dimensional talamneas are as fellows due to variations In manu/OTE:
Length / Width ! Hoighl(s): +F 6/B"
Haight Variance (aide to Sid.):+!•tPP'
cm)
COUNTYREVIEWED FOR
2.1 Model Specifications
14ft. DIAMOND Swim Spa
Shell Dimensions: 174" x 93"
Height: 52.75"
Volume: 1,900, US gallons
Weight Full: 18,445 lbs.
Weight Empty: 2,532 lbs.
E
UL and ETL Swim Spa Code Compliance
AUTHORIZATION TO MARKREVIIEWE® FOR
C.-POOE COMPLIANCE
This authorizes the application of the Certification Mark(s) shown below to the�nioddls'described%irfTtK&PP67ddct(s)
Covered section when made in accordance with the conditions set .forth in the Certificatio g eerpent and Listing
Report. This authorization also applies to multiple listee model(s) identified on the correlation page�of the Listing
Report.
This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be
applied only at the location of the Party Authorized To Apply Mark.
Applicant:
ThermoSpas
Manufacturer: -
ThemoSpas
Address:
335 Superior Blvd.
Address:
335 Superior Blvd.
Mississauga, Ontario L5T 21-6
Mississauga, Ontario L5T 21-6
Country:
Canada
Country:
Canada
Contact:
Mr. Doug Wyatt
Contact:
Mr. Doug Wyatt
Phone:
(905) 565-6810
Phone:
(905) 565-6810
Party Authorized To Apply Mark: Same as Manufacturer
Report Issuing Office: Toronto, Canada
Control Number: 99399 Authorized by:
for Thomas J. Patterson, Certification Manager
COus
sT
Intertek
. This document supersedes all previous Authorizations to Mark for the noted Report Number.
This Authorization to Mark is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are
limited to the terms and conditions of the agreement Intertek assumes no liability to any party, other than to the Client In accordance with the agreement, for any loss, expense or damage occasioned
by the use of this Authorization to Mark. Only the Client Is authorized to permit copying or distribution of this Authorization to Mark and then only in its entirety. Use of Intertek's Certification mark Is
restricted to the conditions laid out In the agreement and In this Authorization to Mark. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must
first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the
agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect.
Intertek Testing Services NA Inc.
545 East Algonquin Road, Arlington Heights, IL 60005
Telephone 800-345-3851 or 847-439-5667 Fax 312-283-1672
Standard for Electric Spas, Equipment Assemblies, and Associated Equipment ANSI/UL 1563, 6th
Edition dated July 16, 2009, including revisions through and including July 30, 2012
Standard(s): Standard for Spas, Hot Tubs, and Associated Equipment CAN/CSA-C22.2 No. 218.1-M89, 1 st Edition,
including update No. 2 dated September 2006, Update No. 3 dated December 2006, Update No. 4 dated
March 2010.
Product: Permanently Connected, Self-contained Spas.
Brand Name: Hydropool Serenity, Hydropool Self Clean, Swim Spa, Hydropool Lazy Boy, ThermoSpa SwimSpa
ATM for Report 3092105TOR-001
Page 1 of 2
ATM Issued: 2-Dec-2013
ED 16.3.15 (I-Jan-1 ) Mandatory
II