HomeMy WebLinkAboutProduct Approval (2) orida Building Code Onlite nnp:/iwww.iionaaDUliCtMg.019/Pf/j)ll-UPP__�ULL.dbpZ.1.JJMUIII—W�L V
it1
BCIS Home Log In User Registration Hotjbpjcs Submit Surcharge Stats&Facts Publications FBc staff 13M Site Ma
Bus*ines, :,..I Product Approval
Profess 1.'. 6`61 COUSER:Public User
> �11! n=+earth>ADVI�Cati'on Lit>Appikation Detail
FL# FL2569-R11
OZ.
Application Type Revision
Code Version 2014
Application Status Approved
Comments
Archived
Product Manufacturer Soprema,Inc. (Canada)
Address/Phone/Email 1640 rue Haggarty
Drummondville, NON-US 00000
(819)478-2400 Ext 3327
memathieu@s.oprema.c8
Authorized Signature Marc-Etienne Mathieu
memathleu@sqprema.ca
Technical Representative Marc-Etienne Mathieu
Address/phone/Email 1688 Jean-Berchmans-Michaud
Drummondville,NON-US 00000
(819)478-2400 Ext 3327
memathieu@soprema.ca
Quality Assurance Representative Jean-Francols Cote, Ph.D.
Address/Phone/Email 1640 rue Haggarty
Drummondville
(888) 811-3145
jfcote@soprema.ca
Category Roofing
Subcategory Underlayments
Compliance Method Evaluation Report from a Florida Registered Architect o
Florida Professional Engineer
Evaluation Report-Hardcopy Received
Florida Engineer or Architect Name who developed Rdbert J. M. Nierninen
the Evaluation Report
Florida License PE-59166
Quality Assurance Entity UL LLC
Quality Assurance Contract Expiration Date 10/16/2017
Validated By John W. Knezevich, PE
f3 1/5/2016 3-08 PM
orida"Building Code Online nttpaiwww.riorlaaouuaulg.org/pr/pc_dpp_utt.aspa:pa.tuut—w"ljvn...
a V Validation Checklist-Hardcopy Received
Certificate of Independence i=�2j69 R11 COI 2015 0. CGI ILiEmine=�.Uei;
Referenced Standard and Year(of Standard) Standard
ASTM D1970
ASTM D6163
ASTM D6164
FM 4474
FR5A/TRI April 2012 (04-12.)
TAS 103
TAS 110
Equivalence of Product Standards
Certified By
Sections from the Code
Product Approvai Method Method 1 Option D
Date Submitted 10/15/2015
Date Validated 10/19/2015
Date Pending FBC Approval 10/21/2015
Date Approved 12/15/2015
Summary of Products
FL# Model,Number or Description
(Name
2569.1 Soprema Roof Self adhering roof underlayments
Undedayments
Limits of Use Installation Instructions
Approved for use in HVHZ: No FL2569 R11 Ii 2015 10 FINAL ER SQPR.EMA. CA UNDERLAW
Approved for use outside R11,odf
HVHZ:Yes Verified By: Robert Niemineri, P.E. PE-59166
Impact Resistant: N/A Created by Independent Thlyd Party: Yes
Design Pressure: +N/A/-90 Evaluation Reports
Other.: 1.) Refer to ER Section 5 for ELZ569 R11 AE 2 15 10 FINAL ER SQPREMA .CA UNIQ RRLAY
Limits of Use. 2.)The design pressure R1:1Pdj
-
noted herein pertains to underlayment Created by Independent Third Party: Yes
systems used.beneath adhesive-set We-
systems. Refer to ER Section 5.6.4 for
details.
. Bacft 1Next� . .
Contact Us::1940 North Monroe Street.Tallahassee Fl.32399 Phone:850-4a7-1824
The State of Florida is an AA/EEO employer. nvraht 2007-2013 State of Florida.::Pry Statement::P .- ssi ihty Stat m-nk;:h
Under Florida law,email addresses are public records.If you do not want your e-mail address released in response to a public-records req
173 1%5/2026 3:08 FM
oilda Building Code Online nup://www.ijorioat)uiiamg.orgipripr_app_uti,aspx?purtt,IL—w%jr,v.A....
electronic mall to this entity.Instead,contact the office by phone oc by traditional mail,if you have any questions,please contact 850.487.
Section 455.275(1),Florida Statutes,effective October 1,2012,licensees licensed under Chapter'455,F.S.must provide the Department wl
they have one.The emags provided may be used for official communication with the licensee.Howeveremag addresses are public record.if
supply a personal addressi please provide the Department With an email address which can be made available to the public.To determine 9 yo
Chapter 455,F.S.,please click help—.
Product Approvalix Accepts:
2*1111 FE
E R
115120 16 3:08 PM
'
` .
EXTERIOR RESEARCH QKDESIG '[LC.
Certificate of kithorizotion#9503
3S3CHR�Th�NSTREE[UN[T#l3
o�w '
� 1:�{-t -- CHRISTIAN '
���0��� � � '~-^��� OXFORD,CT 06478
�
PHONE,(203Y 262-9245
FAX (203)262-9243
EVALUATION REPORT
Soprerna,Inc. Evaluation Report S18010.06.09-119
1o+urue HaggertyL
2569
Drummondville,Oudbeu]2C59Q Date of Issuance:06/15/2009
Canada Revision 9:10/12/2015
ScOpEi
This Evaluation Report.is issued under Rule 61G20-3 and the applicable rules and regulations governing the.use of
construction materials in the State of Florida.The documentation submitted has been reviewed by-Robert Nieminen,
P.Efor use of the product under the Florida Building Code and Florida Building Code, Residential Vm|unne' The
�
prpducts described herein have been evaluated for compliance vvith m the S Edition (2014) F|odda Building Code
�'sectlonsnoted herein.
DESCRIPTION: So9nemmaRoof UodmNsynmemts
LABELING: Labeling shall be in accordance with the requirements the Accredited Quality Assurance Agency noted
herein. �
CONTINVED COMPUANCE. This Evaluation Report is valid until such time as the named product(s)changes,the referenced
Quality Assurance documentation changes,or provisions of the Code that relate to the product change. Acceptance of
this Evaluation' Report 'by the named client constitutes agreement to notify Robert Nienninen, P.E. If the product
changes orthe referenced Quality Assurance documentation changes. Trin|ty|ERDrequires ocomplete review ofthis
Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Evaluation Report number preceded bvthe words "Trinity|ERD Gva|ueted" may bedisplayed in
ody6ttising8ternture' |fany portion ofthe Evaluation Report isdisplayed,thenitshaUbedonain'itsentirety,
IUSPEC�01\1: Upon request,a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its.distributors and shall be available for inspection at theJob site-at the request of the Building Official.
This Evaluation Report consists ofpages 1through 7.
Prepared by:
'
. `
r��*��� �=�: =�*��w�^
0o�e�1&8,���n]mam,9.E' " =~
P.E.on 10/12/2015.This does not serve as an electionical1v signed
Florida Registration No.59156,Florida DC4 ANE1983
document.Signed,sealed hardcoples have been transmitted to the
w"*.u^pp=m/m=m*trk*,and mthe named client .
CERTIFICATION orINDEPENDENCE:
I. Trinity IsuOdoes not have, not does itintend toacquineorwill it acqui,e' afinancial interest |nany company manufattu,/nA-ur
distributing products ueva|uees.
�.
Trinityl ERD Is not owned,operated or Controlled by any company manufacturing or distributing products It evaluates.
s. Robert Nieminen,P.E.does not have nor will acquire,a financial interest in any Company manufacturing or distributing produc�s for
whi.chthe.evaluation reports are being issued.
4. Robert Nieminen,PI.E.does not have, nor will acquire,a financial interest in any other entity involved in-tNe approval process of the
,
product.
s. This /nabuilding code evaluation. Neither Trinity|snnnor Robert m/em/nen' P.E.are,many way,theme,igparnfRecord for any
project on Which this Evaluation Reportl*-or previous versions thereof,Is/was used for permitting o.r.clesign guidance unless retained
specifically for that purpose.
'
�71
\ �
/��F�
" J, ~, ° ^
ROOFING COKApO0ENTEV4LuuBmO0:
1. SCOPE:
Product Category. Roofing
Sub-Category: Underlayment
Compliance Statement: Roof Under|ayments, as produced by S*pnemo, have demonstrated compliance with the
following sections of the Florida Building Code through testing in accordance with the following-Standard-5.
Compliance is'subject to the installation Requirements and Limitations/Conditions of Use set forth herein.
�
STANDARDS:
Section Property Standard Year
1504.1.1 Wind Resistance FKx4474 20o4
�
1507.2.4,1507.2.8, Physical Properties ASTM D197O 2009
1507.2.9.2,1507.4.5.1,
' 1507.5.3,1507.7.3
1507.11.2 Phmica(pmperUeo ASTM D6163 2606
1507.11.3 Physical Properties ASTM oa1a« znVs
Physical Properties TAS 103 1995
TAS 110 Accelerated Weathering TAS 110 2000
1507.3.3 Installation Practice FnSAVTn|April 2V12(O4-z2) 2012
3. REFERENCES:
9a�� Examination Reference Date
ERD(TST6049) ASTM o1970/TAS 11O 2A58.05.04' 0s/14/2004
sRD(TsT8O49) Physical Properties 2757.02'05 82/03/2085
sno(TsTao4g) ASTM uz97D/TAS zzO 2974.03'05�2 05/17/2085
sno(TsTso4g) Wind Resistance 2778.07.05 07/15/2005
ERD(TST6O4y) Wind Resistance 2779.11.05'nz 04/1812007
' 8eo(TST60*9) TAS 1oa/TAS z1n s7120.1.1.07'2 11/02/2007
sno(TST6V4S) ASTM ozy7u/TAS 11O 513190.02.0e'n1 04/0112010
sno(TST6u4y) ASTM o1970/TAS 110 S31370.03.18'1-RI 04/07/2010
ERD(TST6049) Physical Properties/Tensile Adhesion S11150.05.10'nI 09/09/I010
ERO<TS7SV49> Physical Properties/Tensile Adhesion s11150.05.09'R2 10y05/2010
ERD(TST684g) ASTM D1970 S37218.11.11 11109/2811
ERD(TST6V49) ASTM D1970 s40540.02.13'1 02/19/2013
eno(TSn6O4y) Physical Properties/Tensile Adhesion S43530-02.14-1 02/2-1/2014
snD(TST§O45) Physical Properties/Tensile Adhesion 3OpC-SC7645.02.15 02/13/2015
s*o(TST6n4$) Accelerated Weathering S0psac8520.14 04/17/2015
;w-n(CER
- s9z)' HV*Zcomp|iance 0e'1005.02 11/04/2010
rm-o(ccn15sZ) HvHZcomp||ance 13'0530.02 11/27/2014
|Co'ss(sVLzayo) Zu1%'zOuyand uOO6IBC Compliance sSn'1524 10/0p14
PR| (TSTsu7D) Physical Properties sOP'0e4-02-01 zu/ua/zOzs
Snpmmo,Inc.(PDMs511) Equivalency Declaration 5ASMOOTH PLY 4V 05/29/2015
UL,LLC(QVAS6z5) Q4a|itvContm| Service Confirmation . . Exp.1o/i-6/ZOz7
4. PRODUCT DESCRIPTION: .
4'1 LoutobondTU HTisase|f-adhehng, non-woven polyester fabric surfaced, SBS modified bitumen roof
undedaymnent
4.2 Lastobond Shield in e self-adhering, woven polyethylene surfaced, SBS modified bitumen roof
undedaymentavailable in two widths;36and 4Sinch.
4.3 RES|3TOSASMOOTH PLY 40 is self-adhering, woven polyethylene surfaced, SBS modified bitumen roof
uodedaYment;available|n3'3 ftxG5ftrolls.
`
Exterior Research and Design,LLC. Evaluation Report u18010.06o9-ne
Certificate of-Authorization#9503 pL2569-RzI
Revision 9tuo/12/zo1S
Page oo*r
' \ � l
� '����
T���`�
I ����*�
4.4 Loytobond Shield HT is a self-adhering, woven polyethylenesurfaced, high temperature, SBS modified
`
bitumen roof undadayment
43 Loxtobond Pro HT'N is a self-adhering, woven polyethylene surfaced, SBS modified bitumen roof
undedaymentavailable iotwo widths;3Gand 4Sinch.
4.6 Las�tobond Pro HT-S is a self-adhering, woven polyethylene surfaced, high temperature, SBS modified
bitumen roof under|ayment.
4.7 Lastobond. 185 is o $a|f-adhering, glass-mat reinforced,. sand-surfaced, SBS modified bitumen roof
undedeyment
4.8 Lostobond is a self-adhering, glass-mat reinforced, sand-surfaced, 5B5 modified bitumen roof
undedayment
48 L�tobomd Eco is a self-adhering, glass-mat reinforced, sand-surfaced, SBS modified bitumen roof
' undedayment
4.10 LestoboNdSmooth Seal HT'is a self-adhering, glass-not reinforced, fi}m`ourfaced 583 modified bitumen
noufunder|aymant'
4.11 RESBTO LQ1236 is o self-adhering, glass-mat reinforced, sand-surfaced SBS mnmUfiedbitumen roof
under|ayrnent,with a3G-|nchsheet width.
4'12 PdmeSourceGrip-Rite Eave&Valley Protector isaxe|f�adhehnB,glass-mat reinforced,sand-nurfaced'SBS-
modified bitumenroufunder|oymont,vv}tha38-inohshemtwidth.
4.13 RBSISTO LB1244 is o xmAf-odhehng, glass-mat reinforced, sand-surfaced, SBS modified bitumen roof
undedaymentwith a44-inchsheet width. .
4.14 Co|pbmoe FR GK is o self-adhering, fiberglass reinforced, granule-surfaced, SBS modified bitumen roof
under|ayment.
4.15 UnUay (e) is o mechanically attached, polyester reinforced, granule-surfaced, SBS. modified bitumen roof
under|ayment.
5^ l|YmnAroms:
5.1 This is a building code evaluation. NeitherTdnity|ERD nor Robert Nieminan, P.E. one, in anyway, the
Designer of-Record for any project-on vxhichthixEva|uationPepnrt, orprevious-versionsthereot is/was
used for permitting or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in the HVHZ.
S'] Fire Classification is not part of this.report; refer to.current Approved Roofing Materials Directory for fire
' ' rotinBy-ofth/sprpduct.
`
5.4 Soprema Roof Underlayments may be used with any prepared roof cover where the product is specifically
referenced within F8Coppoova|documents' if not listed, a request may be made tothe AH] for approval
based on this evaluation combined with supporting data for the prepared roof covering.
5.5 Allowable.roof covers applied atop the under|oymentuare follows:
TA13LE I: ROOF COVER OPTIONS Underlayment Asphalt Nall-orl Foam-On Metal Wood Shakes& Slate Shingles Tile Tile Shingles Yes Lastobond TU HT Yes Yes See 5.5.A Yes Yes Yes Yes No No No Yes Yes RESISTO SA SMOOTH PLY 40 Lastobond Shield HT/Pro HT-S �es No No Yes Yes Yes Lastobond/Lastubond 195 Yes No No No Yes Yes
Exterior neswanhand Design,I.I.C. Evaluation Report s1801o.0s.0e-11y
zertificore,ofxuth*uzatio"m95m rc2569-nII
`
Revision 9:10/12/2010
'
Page 3m7
KNE `= �
TABLE 1: ROOF COVER OPTIONS
Underiayment Asphalt Nail-On Foam-On Metal Wood Shakes& Slate
Shingles Tile. Tile Shingles
Lastobond ECO /RESISTO
LB1236,Grip-Rite Eave&Valley Yes. No No No Yes Yes
Protector/RESISTO LB1244
Lastobond Smooth Sea]HT Yes No No Yes Yes Yes
Yes
Colphene FR GR Yes Yes See 5.5.1 No Yes Yes
Yes Yes
Unllay(e) Yes Batten Only See 55.1 NO No No
5.5,1 "Foam-On Tile" is limited to.use of the following adhesives unless tensile adhesion/long term aging data
from an accredited testing laboratory is provided.
Underlayment Adhesive(s)
Lastobond TU HT 3M 2-Component Foam Roof Tile Adhesive AH-160(FL6332)or Dow Chemical TileBond"'Roof
Tile Adhesive(FL717)
Colphene FR GR 3M 2-Component Foam Roof Tile Adhesive AH-160(FL6332)
Unilay(e) 3M 2-Component Foam Roof Tile Adhesive AH-160(FL6332)
5.6 Allowable substrates are noted below:
5.6.1 Direct-Bond to Deck: .
Lastobond Shield, Lastobond Pro HT-N, RESISTO SA SMOOTH PLY 40, Lastobond Shield HT, Lastobond Pro
HTS, Lastobond TU HT, Lastobond, Lastobond 195,. Lastobond ECO, RESISTO LB1236, Grip-Rite Eave &
Valley Protector,RESISTO LB1244 or Lastobond Smooth Seal HT applied to:
Plywood;ASTM D41 primed plywood; OSB;ASTM D41 primed OSB;Southern Yellow Pine;ASTM D41
primed Southern Yellow Pine;ASTM D41 primed structural concrete.
Colphene FR GR applied to:
s Plywood;ASTM D42 primed plywood;ASTM D41 primed structural concrete.
N ote:
While not required over plywood, OSB or Southern Yellow Pine substrates, Soprema recommends
priming with Elastocol Stick or Elastoco] 600c if the final roof cover is not slated for installation within
24 hours.
> Soprema requires tongue-and-groove board decking be covered with plywood or OSB prior to
installation of the self-adhering underlayment.
5.6.2 Bond-to-insulation:
Lastobond Shield, Lastobond Pro HT-N, RESISTO SA SMOOTH PLY 40, Lastobond Shield HT, Lastobond Pro
HT-S, Lastobond TU HT, Lastobond,. Lastobond,195, Lastobond ECO, RESISTO LB1236, Grlp-Rite Eave &
Valley Protector, RESISTO LB1244, Lastobond Smooth Seal HT or Colphene FR GR applied to.:
> Dens Deck Prime;SECUROCK Gypsum-Fiber Roof Board.
For installation under mechanically attached prepared roof coverings, insulation shall be attached per
minimum requirements of the prepared roof covering manufacturer's Product Approval. For installations
under foam-on the systems(Lastobond TU HT only), insulation attachment shall be designed by a qualified
design professional and installed based on testing of the insulation/underlayment system in accordance
with FM 4474,Appendix D or TAS 114,Appendix I
Exterior Research and Design,I.I.C. Evaluation Report 919016.06.09-R9
Cerdfrcate ofAuthorization#9503 FL2569-R11
Revision 9:10/12/2015
Page 4 of
i
N Y : .
5.6.3 Bond to Mechanically Attached Base Laver:
Lastobond Shield, Lastobond Pro HT-N, RESISTO SA SMOOTH PLY 40, Lastobond Shield HT, Lastobond Pro
HT-S, Lastobond TU HT, Lastobond, Lastobond 195, Lastobond ECO, RESISTO LB1236, Grip-Rite Eave &
Valley Protector,RESISTO LB124.4,Lastobond Smooth Seal HT or Colphene FR GR applied to:
➢ ASTM D226,Type I or II felt,Sopra-G;Modified Sopra-G.
For installations under mechanically attached prepared roof coverings, base layer shall be attached per
minimum codified requirements. For installations under foam-on tile systems (Lastobond TU HT only),
base layer shall be attached in accordance with FRSA/TR1 April 2012(04-12).
.5.6.4 Wind Resistance for Underlayment Systems in Foam-On Tile Applications: FRSA/TRI April 2012 (04-12)
does not address wind uplift resistance of all underlayment systems beneath foam-on tile systems;where
the underlayment forms part of the load-path. The following wind uplift limitations apply to underlayment
systems that are not addressed In FRSA/TRI April 2012 (04-12) and are used in foam-ori the applications.
Maximum Design Pressure is the result of testing for wind load resistance based on allowable,wind loads,
and reflects the ultimate passing pressure divided by 2 (the 2 to 1 margin of safety per FBC 1504.9 has
already been applied). Refer to FBC 1609 for determination of design wind pressures.
5.6:4:1 Maximum Design Pressure=-45.0 psf.
Deck: Min.15/32-inch plywood to meet project requirements to satisfaction of AHJ.
Primer: (Optional)Elastocol Stick or Elastocol 6000
Underlayment: Lastobond TU HT or Colphene FR GR,self-adhered.
5.6.4.2. Maximum Design Pressure=-67.5 psf.
Deck: Structural concrete to meet project requirements to satisfaction of AHJ.
Primer: Elastocol 600c
Underlayment: Lastobond TU HT or Colphene FR GR,self-adhered.
5.6.4.3 Maximum Design Pressure=-60.0 psf.
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of AHJ.
Base Sheet: Sopra-G or Modified Sopra-G mechanically attached with nails (FBC 1517.5.1) and tin
caps(FBC 1517.5.2)spaced 6-inch o.c.at the 4-'inch laps and.6-inch o.c.in three,equally
spaced rows in the center of the sheet.
Underlaymerit: Lastobond TU HT or Colphene FR GR,self-adhered
5.6.4.4 Maximum Design Pressure=-90.0 psf.
Deck: Min.19/32-inch plywood to meet project requirements to satisfaction of AHJ.
Underlayment: Unilay(e) mechanically attached with Soprafix Polymer Batten Bar (PBB) or Soprafix
Metal Batten Bar(MBB)with Soprema#15-1L fasteners spaced 6-inch o.c, within the 5-
inch wide, self-adhering side laps. End laps are 6-inch wide and sealed using either
heat-welding or hot-air welding techniques.
5.7 Exposure Limitations:
Lastobond, Lastobond 195,Lastobond Eco, Lastobond Smooth Seal HT, RESISTO LB1236, Grip-Rite Eave & I
Valley Protector or RESISTO LB1244 shall not be left exposed for longer than 30-days after installation.
Lastobond Shield, Lastobond Pro HT-N, RESISTO SA SMOOTH PLY 40, Lastobond Shield HT or Lastobond
Pro HT-S shall not be left exposed for longer than 90-days after installation.
Lastobond TU HT or Colphene FR GR or Unilay(e)shall not be left exposed for ionger,than 180-days•after
installation.
Exterior Research and Design,LLC. Evaluation Report 528010:06.09-R9
Certificate of Autharization#9503 FL2569-Rii
...Revision 9;10/12/2015.
Page•5 of 7
����
QRIN � ?K �^�^�
' 8. INSTALLATION:
8.1 Soprama Roof Undodayments� shall be installed in accordance 'With Sopremu published installation
,
requirements subject fnthe Limitations set forth inSection S herein and the opedfics noted�eluw'
G'JRe-fasteh any loose decking panels,and check for protruding nail heads. Sweep the substrate thoroughly
to remove any dust and debris prior to application, and prime the substrate with E|adoco| Stick or
E|astoco[GOOo(if appUcab|e)'
�3 Lastobond TU HT,Lastobond Shield,Lastobond Pro HT-N,RESISTO SA SMOOTH PLY 40,Lastobcfnd Shield
HT,Lastobond Pro HT-S,Lastobond,Lastobond 19S,Lastobond Eco, Ustobond Smooth Sead HT,RESISTO
LBI-2. 36,Grip-Rite Eave&Valley Protector,RESISTO L01244 or Colphene FIR GR:
6.3.1 Shall be installed in compliance with the requirements for ASTM D1970 undedayment in FBC Sections
� 1SO7for the type ofprepared roof covering tobainstalled.
6.3'J Non-Tile Applications:
While priming Is optional,Soprema recommends priming With Elastocol Stick or Elastocol 6.00c,if the-final
roof cover Isnot slated for lnsta|lationwithin.24hours.
Apply sheet parallel tothe roof edge. Roll out approximately 1O1tofmembrane and peel back the first 3
ftnfrelease.film.
Adhere the exposed part to the substrate and unroll the remaining membrane as far as possible.
Once the entire length of membrane is in place, peel-off the release film diagonally while holding the
membrane tight.-Firmly roll the membrane into place toachieve obond. .
Horizontal seams should be minimum 3-inches, configured to shed water. Vertical seams should be G'
/
Inches and st� from course AUover-granule end'|aps
nhaUbesea|edusing either heat-welding orhot air welding techniques.
When installing at slopes above 8:12,Soprema recomrnen&back-nailing in the overlap area-at the top of
the sheet ut12-inoho.c.
For Valleys and Ridges: Cut underlayment into 4 to 6 foot lengths. Peel the release paper and center sheet
over valley or ridge. Drape and press sheet into place, working from the center ofthe valley ur ridge in
each direction; For valleys,apply the sheet starting atthe lowest point and work upward.
6.3.3 Tile 4�pllcatlons(Lastobond TU HT or Coll2hene FR GR only):
Reference is made to FR5A/TR| April 2012 K04'12 Installation Manual and Table 1-herein, using the
instructions noted above aaaguideline.
�
For foam-on tile applications, reference is-made to Section.5.6.4 herein for wind resistance limitations that
fall outside the scope ofFRS//TR|April 1812(P4-12)'
Tile shall be loaded and staged in a manner that prevents tile slippage and/or damage to the
. undedayment.
{.4 8�nilay(e):
6.4.1
Reference is made to Table I herein and FRSA/TRI April 2012(04-12) Installation Manual (I f applicable).
'
Apply sheet parallel to the roof edge and, starting at the eave with the selvedge-edge ups|npe
mechanically attach the 5-Inch wide selvedge-edge to the wood deck with nails and tin caps or round cap-
nailsapaoad36-inchu-c. App|ythasecond course inawater-shedding manner with oe|f'odhednQside-
laps. Vigorous hand or motorized roller pressure is applied to the self-adhering laps to ensure a watertight
application.
Vertical seams should be6'inthesand staggered not less than 2-ft from vertical seams in the course
below. All over-granule end-laps shall be sealed ujing either heat-welding or hot airwelding techniques.
Exterior Research and Design,LLC. Evaluation neportg18mmu6.0eR9
cer4oCate*Avthor1:ZumVnme03 ,ossy-RIx
Revision m1011212o15
Page ovfz
s ERS.._
Tile(if applicable)shall be loaded and staged in a manner that prevents the slippage and/or damage to the
underlayment:
6.4.c Foam-On Tile Applications:
Reference is made.to FRSA/TRI April 2012 (04-12) Installation' Manual, Table 1 herein and Section 5.6.4.4
herein.
Apply sheet parallel to the roof edge and, starting at the eave with the selvedge-edge upslope,
mechanically.attach the 5-inch wide selvedge-edge to the wood deck Soprafix Polymer Batten Bar(PBB)or
Soprafix Metal Batten Bar (MBB) with Soprema #15-EL fasteners spaced 6-inch o.c. Apply the second
course in a water-shedding manner with self-adhering side-laps. Vigorous hand or motorized roller
pressure is applied to the self-adhering laps to ensure a watertight application.
Vertical seams should be 6-inches and staggered not less than 2:-ft from vertical seams in the course
below. All over-granule end-laps shall be sealed using either heat-welding or hot air welding techniques.
Tile shall be loaded and staged in a manner that prevents tile slippage and/or damage to .the
underlayment.
7. BUILDING PERMIT REQUIREMENTS:
As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the.installation of
this.product.
8. MANUFACTURING PLANTS:
Contact the manufacturer or the named QA entity for information on plants covered under- Rule 61G20-3 QA
requirements•.
9. QUALITY•ASSURANCE ENTITY:
UL,LLC—QUA9625;(314)578-3406;k.chancellor@us.ul.com
-END OF EVALUATION REPORT-
Exterior Research and Design,CLC. Evaluation.Report 518010.06.09-119
Certificate of Authorization.#9303 FL2569-R11
Revision 9.10/12/2015
Page Tof 7