HomeMy WebLinkAboutInvoiceSunlast Metal, Inc.
Invoice
Date Invoice #
4/1/2016 224,-
Bill To
Ship To
101 Ridge PI.
Fort Pierce, FL 34982
ABC Bradco;
CT#138282-01
Rep
Delivery Date
Terms
Contact
Job Name
OC
4/1/2017
Due with order
Steven
101 Ridge PI, Fort Pierce, FL
Item Code
Quantity
Description
U/M
Rate
y
Amount
01-01 0 & C
1
Local Delivery / Per Delivery (Under 25 Miles Approx)
52.00
52.01
*** JOB ADDRESS: 101 Ridge PI, Fort Pierce, FL 34982 ***
02-26G V
11.33
5V Crimp (24") Sunlast Key West Series
67.83
768.5,
26ga Galvalume Plus Finish
(Galvalume may not be U.S. sourced)
FL Product Approval #19621.1
**Approved for use in HVHZ**
*** BASED ON AVERAGE 12" OC "ROW" SPACING
16" OC "Row" Spacing and 12" "Fastener" Spacing
Has Design Pressures of-78.5 PSF
8" OC "Row" Spacing and 12" "Fastener" Spacing
Has Design Pressures of-189.25 PSF
ALL WARRANTIES NEED TO BE APPLIED FOR WITHIN 12 MONTHS OF JOB COMPLETION.
Final Payment Must Be Received in Full Prior to Delivery
No product warranties are valid for any steel roof within 600 ft of any water source and within 112 mile of the coast. Sunlast Metal, Inc.
r Fax or Mail Back for Credit Card Payments
accepts no responsibility for securing a load once items have been picked up and it is the purchaser's responsibility to secure material
before leaving. Customer assumes all responsibility for cut list and determining if product meets local requirements. Material lengths can
No Returns or Refunds
vary +/- one inch. Additional products at additional charge. Licensed roofer must install. Acceptance upon delivery. In the event that the
All Sales are Final
account becomes deliquent, I/we agree to pay all costs, including reasonable attorney fees, court costs and interest charges of 2% per
month. Oil canning is not a cause for rejection of the panels, as it is inherent to all metal roof systems. Striations are recommended. Color
Subtotal
variations may occur on the finish of the panel; mill or painted; this a cosmetic issue and not covered under a warranty or cause for
rejection.
Sales Tax (6.5%)
Sunlast Metal, Inc. shall not in any event be liable to the customer or any other person or entity for any actions, claims, causes of action,
Total
damages, expenses and/or liabilities arising from. or related to the design, use or failure of products or coatings, for the interruption of the
customer's operation or business, for the cost of labor expended by others on any defective product or coating or for any special, indirect
or consequential damages whatsoever or loss of profit or other financial loss arising out of the use or failure of a product or coating.
Orders with more than 25 different cut lengths may incur charges of an extra $1.55/panel. Special skid/packaging requirements subject to
Payments/Credits
additional charges. Purchaser agrees to indemnify and hold harmless Sunlast against all loss or damage incurred by reason of any
liability, which may be imposed by law upon Sunlast by virtue of the failure of Purchaser to adhere to all of the rules and regulations of the
Occu. Safety and Health Act.
Balance Due
(Please Print)
Signature of Acceptance:
Circle Card Type: Visa MC Disc Amex Cardholder Name:
Billing Address: City/State/Zip:
Printed:
Credit Card#: Exp Date: CVV M
Date:
S
nc.
*A,, !�aiks-
Invoice
Date Invoice #
4/1/20t6 224
Bill To
Ship To
101 Ridge Pl.
Fort Pierce, FL 34982
ABC Bradco; CT#138282-01
Rep
Delivery Date
Terms
Contact
Job Name
OC
4/1/2017
Due with order
Steven
101 Ridge PI, Fort Pierce, FL
Item Code
Quantity'
DescriptionRate
Amotant
M22.8E
13-DE2G
5
Drip Edge - 2" x 2" 26ga Galvalume Plus Finish
*** PLEASE SPECIFY 901 OR ROOF PITCH: /12 ***
4.57
13-GRG
6
Gable Rake - 26ga Galvalume Plus Finish
9.22
55.3,
13-RCG
2
Ridge Cap - 26ga Galvalume Plus Finish
*** PLEASE SPECIFY ROOF PITCH: /12 ***
13.85
27.7(
15-08V
7
MFM Ultra HT Wind & Water Seal - Peel-N-Stick
(1.86 Square Coverage),
ea
82.00
574.0(
FL Product Approval # 11842.5
MIAMI-DADE NOA 13-1125.06
18-02
1
Pricing is based on specific requested items. Any additional
items are subject to additional cost.
0.0(
ALL WARRANTIES NEED TO BE APPLIED FOR WITHIN 12 MONTHS OF JOB COMPLETION.
Final Payment Must Be Received in Full Prior to Delivery
No product warranties are valid for any steel roof within 600 ft of any water source and within 1/2 mile of the coast. Sunlast Metal, Inc.
accepts no responsibility for securing a load once items have been picked up and it is the purchaser's responsibility to secure material
before leaving. Customer assumes all responsibility for cut list and determining if product meets local requirements. Material lengths can
vary +/- one inch. Additional products at additional charge. Licensed roofer must install. Acceptance upon delivery. In the event that the
account becomes deliquent, Itwe agree to pay all costs, including reasonable attorney fees, court costs and interest charges of 2% per
month. Oil canning is not a cause for rejection of the panels, as it is inherent to all metal roof systems. Striations are recommended. Color
variations may occur on the finish of the panel, mill or painted; this a cosmetic issue and not covered under a warranty or cause for
rejection.
Fax or Mail Back for Credit Card Payments
No Returns or Refunds
All Sales are Final
Subtotal
Sales Tax (6.5%)
Sunlast Metal, Inc. shall not in any event be liable to the customer or any other person or entity for any actions, claims, causes of action,
damages, expenses and/or liabilities arising from or related to the design, use or failure of products or coatings, for the interruption of the
customer's operation or business, for the cost of labor expended by others on any defective product or coating or for any special, indirect
or consequential damages whatsoever or loss of profit or other financial loss arising out of the use or failure of a product or coating.
Orders with more than 25 different cut lengths may incur charges of an extra $1.55/panel. Special skid/packaging requirements subject to
additional charges. Purchaser agrees to indemnify and hold harmless Sunlast against all loss or damage incurred by reason of any
liability, which may be imposed by law upon Sunlast by virtue of the failure of Purchaser to adhere to all of the rules and regulations of the
Occu. Safety and Health Act.
Total
Payments/Credits
Balance Due
(Please Print)
Circle Card Type: Visa MC Disc Amex Cardholder Name:
Signature of Acceptance:
Billing Address: City/State/Zip:
Printed:
Credit Card#: Exp Date: CVV M
Date:
Suniastffletal, I Ar Invoice
Date Invoice
4/11/20117 22428
Bill To
Ship To
101 Ridge Pl.
51
Fort Pierce, FL 34982
ABC Bradco; CT#138282-01
Rep
Delivery Date
Terms—]
Contact
Job Name
Oc
4/11/2017
Due with order
Steven
101 Ridge PI, Fort Pierce, FL
Item Cotle
Quantity
Ddsbr1Dt1 on
U/M
Rate
m
�A bunt
18 5
........ . I t and/or ":
DISCLAIMER Ndt oo�g tbe;IJ t
0 t- f tffid
qPR 1[On Pnyt�nys,,tq 1, ays,,s p.Jc
p
S
spr r ssociated the referenced
vtnth property F
s n e ove SUNLAST ME L INC disclaims any
TA
address Pr6 6 p
6 e d that may result while accessing the property
ci�_
Unng Sunlast s `delivery process.
-
ALL WARRANTIES NEED TO BE APPLIED FOR WITHIN 12 MONTHS OF JOB COMPLETION.
Final Payment Must Be Received in Full Prior to Delivery
No product warranties are valid for any steel roof within 600 ft of any water source and within 1/2 mile of the coast. Sunlast Metal, Inc.
accepts no responsibility for securing a load once items have been picked up and it is the purchaser's responsibility to secure material
before leaving. Customer assumes all responsibility for cut list and determining if product meets local requirements. Material lengths can
vary +/- one inch. Additional products at additional charge. Licensed roofer must install. Acceptance upon delivery. In the event that the
account becomes deliquent, l/we agree to pay all costs, including reasonable attorney fees, court costs and interest charges of 2% per
month. Oil canning is not a cause for rejection of the panels, as it is inherent to all metal roof systems. Striations are recommended. Color
variations may occur on the finish of the panel, mill or painted; this a cosmetic issue and not covered under a warranty or cause for
rejection.
r Fax or Mail Back for Credit Card Payments
No Returns or Refunds
All Sales are Final
Subtotal $1,697.67
Sales Tax (6.5%) $104.67
Sunlast Metal, Inc. shall not in any event be liable to the customer or any other person or entity for any actions, claims, causes of action'
damages, expenses and/or liabilities arising from or related to the design, use or failure of products or coatings, for the interruption of the
customer's operation or business, for the cost of labor expended by others on any defective product or coating or for any special, indirect
or consequential damages whatsoever or loss of profit or other financial loss arising out of the use or failure of a product or coating.
Orders with more than 25 different cut lengths may incur charges of an extra $1.55/panel. Special skid/packaging requirements subject to
additional charges. Purchaser agrees to indemnify and hold harmless Sunlast against all loss or damage incurred.by reason of any
liability, which may be imposed by law upon Sunlast by virtue of the failure of Purchaser to adhere to all of the rules and regulations of the
Occu. Safety and Health Act.
Total $1,802.34
payments/Credits-$1,802.34
Balance Due $0.00
(Please Print)
Signature of Acceptance:
Circle Card Type: Visa MC Disc Amex Cardholder Name:
Billing Address: City/State/Zip:
Printed:
Credit Card#: Exp Date: _ CVV #:
Date:
Page 5
Sunla t Metal, Inc. Invoice
Date Invoice #
4/1/201 224z -
lop
Bill To
r'
Ship To
Steven Trempe
101 Ridge PI.
5264 SE Fairlane Ave
Fort Pierce, FL 34982
Stuart, Florida 34997
ABC Bradco; CT#138282-01
Rep
Delivery Date
Terms
Contact
Job Name
OC
4/1/2017
Due with order
Steven
101 Ridge PI, Fort Pierce, FL
Item Cone
Quantity
Descnptlon
lJ/M
Rate .
Amount
DISCLAIMER `Sunlast Metal will provide a cut sheef,fol panel
` - Oa)(
fabrication at the customers request: However; Sunlast w' I
. .
take no responslbi6ty for incorrect cuts or measurementspq
i
based upon customer provided drawings Customershould be
"
aware that cut sheets generated by Sunlast may not be
accurate due to unforeseen field condltidh9. Please allow for "a
these inaccuracies.
18-09
1
NOTE: Credit cards are an acceptable form of payment, but
0.0(
will be subject to a 2% processing fee.
17-13
1
2% Credit Card Processing Fee
35.34
35.3z
18-11
1
NOTE: Checks are an acceptable form of payment. We
0.0(
require copy of the driver's license to be submitted with the
check, no exceptions.
ALL WARRANTIES NEED TO BE APPLIED FOR WITHIN 12 MONTHS OF JOB COMPLETION.
Final Payment Must Be Received in Full Prior to Delivery
No product warranties are valid for any steel roof within 600 it of any water source and within 1/2 mile of the coast. Sunlast Metal, Inc.
Fax or Mail Back for Credit Card Payments
accepts no responsibility for securing a load once items have been picked up and it is the purchaser's responsibility to secure material
before leaving. Customer assumes all responsibility for cut list and determining if product meets local requirements. Material lengths can
No Returns or Refunds
vary +/- one inch. Additional products at additional charge. Licensed roofer must install. Acceptance upon delivery. In the event that the
All Sales are Final
account becomes deliquent, I/we agree to pay all costs, including reasonable attorney fees, court costs and interest charges of 2% per
month. Oil canning is not a cause for rejection of the panels, as it is inherent to all metal roof systems. Striations are recommended. Color
Subtotal
variations may occur on the finish of the panel, mill or painted; this a cosmetic issue and not covered under a warranty or cause for
rejection.
Sales Tax (6.5%)
Sunlast Metal, Inc. shall not in any event be liable to the customer or any other person or entity for any actions, claims, causes of action,
damages, expenses and/or liabilities arising from or related to the design, use or failure of products or coatings, for the interruption of the
Total
customer's operation or business, for the cost of labor expended by others on any defective product or coating or for any special, indirect
or consequential damages whatsoever or loss of profit or other financial loss arising out of the use or failure of a product or coating.
Orders with more than 25 different cut lengths may incur charges of an extra $1.55/panel. Special skid/packaging requirements subject to
Payments/Credits
additional charges. Purchaser agrees to indemnify and hold harmless Sunlast against all loss or damage incurred by reason of any
liability, which may be imposed by law upon Sunlast by virtue of the failure of Purchaser to adhere to all of the rules and regulations of the
Occu. Safety and Health Act.
Balance Due
(Please Print)
Circle Card Type: Visa MC Disc Amex Cardholder Name:
Signature of Acceptance:
Printed:
Billing Address: City/State/Zip:
Credit Card#: Exp Date: CVV #:
Date:
SunlastnMetal.. Inc.
Invoice
Date Invoice #
4/l/2016 224._ .
Bill To�J
Ship To
I�v
101 Ridge PI.
Fort Pierce, FL 34982
ABC Bradco; CT#138282-01
Rep
Delivery Date
Terms
Contact
Job Name
OC
4/1/2017
Due with order
Steven
101 Ridge PI, Fort Pierce, FL
I Item Code
Quanfity
Description
U/M .:
Rate
Amount
(See "TABLE A" In the FL Product Approval for all
fastener spacing options for this panel)
*** FULL STRIATIONS ***
Cut Sheet:
20 Panels @ 15' - 6"
20 Panels @ 12'- 3"
This product is not Energy Star rated.
11-WZ1015BGG C*
5
Woodzac Bag - Galvalume Plus Finish-250pcs per Bag - #10
32.39
161.9E
x 1-1/2"
*** BASED ON AVERAGE 12" OC SPACING
See Florida Product Approval Table "A"
to determine correct clip spacing ***
ALL WARRANTIES NEED TO BE APPLIED FOR WITHIN 12 MONTHS OF JOB COMPLETION.
Final Payment Must Be Received in Full Prior to Delivery
No product warranties are valid for any steel roof within 600 ft of any water source and within 1/2 mile of the coast. Sunlast Metal, Inc.
accepts no responsibility for securing a load once items have been picked up and it is the purchaser's responsibility to secure material
before leaving. Customer assumes all responsibility for cut list and determining if product meets local requirements. Material lengths can
vary +/- one inch. Additional products at additional charge. Licensed roofer must install. Acceptance upon delivery. In the event that the
rFax or Mail Back for Credit Card Payments
No Returns or Refunds
All Sales are Final
Subtotal
account becomes deliquent, I/we agree to pay all costs, including reasonable attorney fees, court costs and interest charges of 2% per
month. Oil canning is not a cause for rejection of the panels, as it is inherent to all metal roof systems. Striations are recommended. Color
variations may occur on the finish of the panel, mill or painted; this a cosmetic issue and not covered under a warranty or cause for
Sales Tax (6.5%)
rejection.
Sunlast Metal, Inc. shall not in any event be liable to the customer or any other person or entity for any actions, claims, causes of action,
damages, expenses and/or liabilities arising from or related to the design, use or failure of products or coatings, for the interruption of the
customer's operation or business, for the cost of labor expended by others on any defective product or coating or for any special, indirect
Total
or consequential damages whatsoever or loss of profit or other financial loss arising out of the use or failure of a product or coating.
Orders with more than 25 different cut lengths may incur charges of an extra $1.55/panel. Special skid/packaging requirements subject to
additional charges. Purchaser agrees to indemnify and hold harmless Sunlast against all loss or damage incurred by reason of any
liability, which may be imposed by law upon Sunlast by virtue of the failure of Purchaser to adhere to all of the rules and regulations of the
Payments/Credits
Occu. Safety and Health Act.
p
Balance Due
(Please Print)
Circle Card Type: Visa MC Disc Amex Cardholder Name:
Signature of Acceptance:
Printed:
Billing Address: City/State/Zip:
Credit Card#: Exp Date: CVV #:
Date: