HomeMy WebLinkAboutLetter; Authorization to use Plans submitted priorWAYNE BERENBAUM ARCHITECTS PRINCWAL
WAYNEBERENBAUM,AfA
10180 LMONGTON ESTATES BLVD • BOCA RATION, FI 33428 AL # AA0008071
ARCHITECTS AND LAND PLANNERS
November 15, 2001
St. Lucie County
Building Department
2300 Virginia Avenue
Ft. Pierce, Florida
ATTN: William Hatcher
(561)2895953
(561) 470-8458 FAX
RE: Bella Vista Apartments (f/k/a Savanna Club Apartments) Port St. Lucie, Florida
Dear Mr. Hatcher:
This letter serves as authorization for St. Lucie County to use the plans submitted prior as
the master plan for the four building types on the above referenced community.
Please feel free to call if you have any questions.
Sinc ly,
ayne Berenbaum, AIA
Principal
61G15-31.003 Design of Structures Utilizing Prefabricated Wood Components.
(1) Apportionment of responsibilities between Structural Engineer of Record (Building
Designer) and Delegated Engineer (Truss Designer) shall be as set forth in Chapter 2 of
ANSI/TPI 1-1995.
(2) In the case of a truss design package, a cover or index sheet may be signed and sealed
in lieu of signing and sealing each individual sheet, provided that the cover or index sheet
contains the following information:
(a) The name, address and license number of the Engineer of Record for
the truss design package.
(b) Identification of the project, name of the authority having jurisdiction
(City, County),.the loads, and the name and date of the applicable building
code that the truss design is intended to meet and all loads imposed on the
structure.
(c) Truss engineering design criteria with full identification of the source
of the criteria. The source will be either the Engineer of Record (if there is
an Engineer of Record for the structural engineering documents), or the
engineer employed by the truss manufacturer. If there is an Engineer of
Record for the structural engineering documents, that engineer shall be
identified with his/her name, license number and address, along with a
checkmark to ensure that the drawings have been reviewed as required by
Rule 61G15-30.006(3).
(d) A truss layout plan by the Engineer of Record showing the location
and designation of each component.
(e) Identification of the computer program used for engineering the
trusses.
(0 An index of the attached drawings. The naming and numbering system
utilized for the drawings shall be clear as to how many drawings there are
in the set and the date of each of these drawings.
(g) Each of the drawings in the package shall bear a title block bearing the
printed name, address, and license number of the Engineer of Record for
the truss design, and the date of the drawing.
Specific Authority 471.033(2). 471.008 FS.
Law Implemented 471.033(1)(0 FS.
History —New 1-26-93, Formerly 21H-31.003, Amended 6-16-99, 3-22-0.1.