HomeMy WebLinkAboutIKO Dynasty NOA NOA No.: 15-0721.01
Expiration Date: 04/21/21
Approval Date: 04/21/16
Page 1 of 3
MIAMI-DADE COUNTY
PRODUCT CONTROL SECTION
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES (RER) 11805 SW 26 Street, Room 208
BOARD AND CODE ADMINISTRATION DIVISION Miami, Florida 33175-2474
T (786) 315-2590 F (786) 315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy
Iko Industries Ltd.
40 Hansen Rd. S.
Brampton, Ontario CANADA
L6W3H4
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER - Product Control Section to
be used in Miami-Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section
(in Miami-Dade County) and/or the AHJ (in areas other than Miami-Dade County) reserve the right to have this
product or material tested for quality assurance purposes. If this product or material fails to perform in the accepted
manner, the manufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this
acceptance, if it is determined by Miami-Dade County Product Control Section that this product or material fails to
meet the requirements of the applicable building code.
This product is approved as described herein, and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: Dynasty Armourzone
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
statement: "Miami-Dade County Product Control Approved", unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product,
for sales, advertising or any other purposes shall automatically terminate this NOA. Failure to comply with any
section of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed, then it shall be
done in its entirety.
INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site at the request of the Building Official.
This NOA consists of pages 1 through 3.
The submitted documentation was reviewed by Gaspar J Rodriguez.
NOA No.: 15-0721.01
Expiration Date: 04/21/21
Approval Date: 04/21/16
Page 2 of 3
ROOFING ASSEMBLY APPROVAL
Category: Roofing
Sub-Category: Asphalt Shingles
Materials: Laminate
Deck Type: Wood
SCOPE
This approves a roofing system using Dynasty Armourzone asphalt shingles manufactured by IKO Industries Ltd. as
described in Section 2 of his Notice of Acceptance.
PRODUCT DESCRIPTION
Product Dimensions Test
Specifications
Product Description
Dynasty Armourzone
13 3/4" x 40 7/8" TAS 110 A heavy weight, fiberglass reinforced
laminate asphalt shingle.
MANUFACTURING LOCATION
1. Kankakee, IL
EVIDENCE SUBMITTED
Test Agency
Test Identifier Test Name/Report Date
PRI Construction Materials Technologies, LLC IKO-148-02-01 TAS 100 10/16/15
IKO-127-02-01 ASTM D 3462 04/15/15
IKO-125-02-01 ASTM D 3161 (TAS-107) 05/14/15
FM Approvals 3013597 ASTM E 108 03/27/03
LIMITATIONS
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
fire ratings of this product.
2. Shall not be installed on roof mean heights in excess of 33 ft.
3. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Code
and Rule 61G20-3 of the Florida Administrative Code.
INSTALLATION
1. Shingles shall be installed in compliance with Roofing Application Standard RAS 115.
2. Flashing shall be in accordance with Roofing Application Standard RAS 115
3. The manufacturer shall provide clearly written application instructions.
4. Exposure and course layout shall be in compliance with Detail 'A', attached.
5. Nailing shall be in compliance with Detail 'B', attached.
NOA No.: 15-0721.01
Expiration Date: 04/21/21
Approval Date: 04/21/16
Page 3 of 3
LABELING
1. Shingles shall be labeled with the Miami-Dade Seal as seen below, or the wording “Miami-Dade County
Product Control Approved”.
BUILDING PERMIT REQUIREMENTS
1. Application for building permit shall be accompanied by copies of the following:
1.1 This Notice of Acceptance.
1.2 Any other documents required by the Building Official or the applicable code in order to properly
evaluate the installation of this system.
DETAIL A
DYNASTY ARMOURZONE COURSE LAYOUT
SECOND COURSE
10"
THIRD COURSE
FIRST COURSE
EDGE OF ROOF
20"
30"Note: Roofing Cement not shown in this layout.
This drawing is for course layout only. See Detail B
for nailing and cement placement details.
DETAIL B
DYNASTY ARMOURZONE
END OF THIS ACCEPTANCE
40 7
8"
13 3
4"
6 3
8"5 7
8"
1"1"1"1"
EXPOSURE