HomeMy WebLinkAboutNotice of Acceptance (3) Cws VC
RECEIVED APR 0 'a N1117
MIAMI-DARE MIAMI-DARE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street,Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.goy/economy
Quanex Building Products,Inc.
1034 Sixth Avenue North
Kent,WA 98032
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction
materials. The documentation submitted has been reviewed and accepted by Miami Dade County RER-
Product Control Section to be used in Miami Dade County and other areas where allowed by the Authority
Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below.The Miami-Dade County Product Control
Section(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right
to have this product or material tested for quality assurance purposes. If this product or material fails to
perform in the accepted manner, the manufacturer will incur the expense of such testing and the AHJ may
immediately-revoke,modify, or suspend the use of such product or material within their jurisdiction. RER
reserves the right to revoke this acceptance, if it is determined by Miami-Dade County Product Control
Section that this product or material fails to meet the requirements of the applicable building code.
This product is approved as described herein,and has been designed to comply with the Florida Building
Code,including the High Velocity Hurricane Zone.
DESCRIPTION: The approved White Rigid PVC Exterior Extrusions for Windows and Doors are to be
produced by Extruders Licensees in"AAMA Certification Programs for rigid PVC Extrusions".The
extrusions shall meet ASTM D 4726,classification(ASTM D 4216) 1-10154-33-0000, 1-20131-13-0000 or
1-40131-13 and the following properties.
Description Test Properties
Rate of Burning ASTM D635 Class CC1
Self-Ignition temperature ASTM D1929 9250F>650OF
Average Smoke Density Rating ASTM D2843 43 <75
Flame Spread Index ASTM E84 26.2<75
Tensile Strength(Difference: *Exposed&Unexposed) ASTM D638 4.98%<10%
*Exposed per Section 2614 of The Florida Building Code.
MISSILE LWACT RATING:None
This NOA renews NOA#12-1017.02 and consists of pages 1 and 2,as well as evidence page E-1.
The submitted documentation was reviewed by Carlos M.Utrera,P.E.
NOA No:17-0206.10
CMIAMI&MEE COUNTY 17 Expiration Date:December 26,2022
Approval Date:March 30,2017
FILE
COPY
MIAMI-DARE MIAMI-DARE COUNTY
win PRODUCT CONTROL SECTION
11805 SW 26 Street,Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F(786)315-2599
NOTICE OF ACCEPTANCE (NOA) www.miamidade.gov/economy
Quanex Building Products,Inc.
1034 Sixth Avenue North
Kent,WA 98032
LI1VIITATION:This approval does not include an evaluation of structural performance of this component.
Test reports and other required documents shall be submitted to Dade County Product Control,showing that
the systems using this PVC Extrusion will resist the loads according to Chapter 16 of the F.B.C.,in order to
issue a specific product approval for the system.
LABELING: Each carton containing certified extrusions shall be labeled with the AAMA PVC Extrusion
Certification Label with the extruder name, city, state and"MDCA".In addition,(a)each Certified
Extrusion shall be labeled every 4 ft or less on the underside with the Extruder Code and"MDCA"or(b)
each finished product assembly shall be labeled with a permanent label and/or stamp with the Extruder Code
and"MDCA".
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been
no change in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change
in the materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement
of any product,for sales,advertising or any other purposes shall automatically terminate this NOA.Failure
to comply with any section of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County,Florida,and
followed by the expiration date may be displayed in advertising literature. If any portion of the NOA is
displayed,then it shall be done in its entirety.
INSPECTION:A copy of this entire NOA shall be provided to the user by the manufacturer or its
distributors and shall be available for inspection at the job site at the request of the Building Official.
NOA No: 17-0206.10
=MIAMI&DE co� Expiration Date:December 26,2022
Approval Date:March 30,2017
Page 2
i`
Quanex Building Products,Inc.
NOTICE OF ACCEPTANCE: EVIDENCE PAGE
A. DRAWINGS
1. None.
B. TESTS "Submitted under AAMA Master File#98-0036"
1. Test report on Rate of Burning,Ignition Temperature, Density of Smoke,Surface
Burring Characteristics, Accelerated Weathering and Tensile Properties Test of"PVC
Extrusions from 5 different manufacturer"selected by AAMA",prepared by ETC
Laboratories,report#ETC 97-264-40910, dated 04/21/1998, signed and sealed by J.
L.Doldan,P.E.
C. CALCULATION
1. None
D. QUALITY ASSURANCE
1. Miami-Dade Department of Regulatory and Economic Resources (RER)
E. MATERIAL CERTIFICATION "Submitted under AAAM Master File#124037"
1. Procedural Guide for the AAMA Fenestration Exterior Thermoplastic Profile Certification
Program(AAMA 109-11).
2. Voluntary Specification for Rigid Polyvinyl Chloride(PVC)Exterior Profiles(AAMA 303-
08).
F. STATEMENTS"Submitted under AAMA Master File#15-0333"
1. Statement letter of code conformance to the 5'b edition(2014)FBC issued by Turner
Engineering&Consulting,Inc.,dated 02/19/2015,signed and signed by Lucas A.Turner,
P.E.
2. Standards' equivalency report issued by Turner Engineering&Consulting,Inc.,dated
02/19/2015,signed and signed by Lucas A.Turner,P.E.
"Submitted under AAMA Master File#12-1037"
3. No financial interest issued by Turner Engineering&Consulting,Inc.,dated 04/25/2012,
signed and signed by Lucas A.Turner,P.E.
G. OTHERS
1. Manufacturer's acknowledgement letter issued by Quanex Building Products,Inc.,
dated 01/20/2017 and signed by Douglas W. Allen.
2. Association release letter issued by American Architectural Manufacturers
Association, dated 01/24/2017 and signed by John G. Smith.
"Submitted under NOA #12-1017.02"
3. Letter stating that Mikron Industries, Inc. is a wholly owned subsidiary of Quanex
Building Products, Inc., dated 10/10/2012 and signed by David C. Gadd.
03 ZZ Z01�
Carlos M.Utrera,P.E.
Product Control Examiner
NOA No: 17-0206.10
Expiration Date:December 26,2022
Approval Date:March 30,2017
E-1