HomeMy WebLinkAboutFBC2017_6thEdition_FL7271.4_R4_5V Panel x 26 Ga over 19-32 Ply - Thru Ribs+FlatsFL 7271.4-R4
C2174-4
8.23.2017
Page 2 of 3
Manufacturer: Union Corrugating Company
Product Name: 5V Panel
Panel Description: 24" wide coverage with (5) 1/2" high ribs
Materials: Minimum 29 ga., 80 ksi steel. Galvanized coated steel (ASTM A653)
or Galvalume coated steel (ASTM A792) or painted steel (ASTM
A755).
Deck Description: Min 15/32" thick APA rated plywood or 7/16" thick OSB or min. ¾"
thick wood plank (min SG of 0.42) for new and existing constructions.
Designed by others and installed as per FBC 2017.
Underlayment: Minimum underlayment as per FBC 2017 Section 1507.4.5.1
Slope: 1/2:12 or greater in accordance with FBC 2017 Section 1507.4.2
Design Uplift Pressure: 52.5 psf @ fastener spacing of 12" o.c.
(Factor of Safety = 2)
Panel Attachment: #9-15 or #10-14 x 1.5" wood screw with washer
At panel ends @ max 6" o.c. across panel width through panel flat
At interior @ max 12" o.c. across panel width through panel flat
Test Standards: Roof assembly tested in accordance with UL580-06 ‘Uplift Resistance
of Roof Assemblies’ and FM 4470 Section 5.5 ‘Resistance to Foot
Traffic’.
Test Equivalency: The test procedures in FM 4470 (1992) comply with test procedures
prescribed in FM 4470 (2012).
Code Compliance: The product described herein has demonstrated compliance with FBC
2017 Section 1507.4
Product Limitations: Design wind loads shall be determined for each project in accordance
with FBC 2017 Section 1609 or ASCE 7-10 using allowable stress
design. The maximum fastener spacing listed herein shall not be
exceeded. This evaluation report is not applicable in High Velocity
Hurricane Zone. Fire classification is not within scope of this
Evaluation Report. Refer to FBC 2017 Section 1505 and current
approved roofing materials directory or ASTM E108/UL790 report
from an accredited laboratory for fire ratings of this product.
FL 7271.4-R4
C2174-4
8.23.2017
Page 3 of 3
Supporting Documents: UL580 Roof Deck Construction No. 579
FM 4470 Test Report
ENCON Technology Inc.
C1583-3, Reporting Date 7/24/08