HomeMy WebLinkAboutNOA; GAF Timberline Ultra HD Shingles,W .
MIANTEDADE COUN I
PRODEC'I CONTROL SECTION
=,ik I N1 EN'!OF REEF LATORI AND ECONOMIC InESOURv ES OVER)
11805 SW 26 gt eel, Room 208
3,1rRn ,AND CODEADMINIS'I'RA'r10N DIVISION
Miami, Florida 33175-2474
T (786) 315 2590 F(786)315-2599
NOT ICE OF ACCEPTANCE (NOA)
w�
�3AF
I. Campus Drive
Parsippany, NJ 07054
SCOPE:
iris NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
ocanlmaid on submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be
_ ae d in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
I ds NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
n ivlimi Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this product
material tested for quality assurance purposes. If this product or material fails to perform in the accepted manner, the
ufacturer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use
( Iuch product or material within theirjurisdiction. RER reserves the right to revoke this acceptance, if it is
r mi fined by Miami -Dade County Product Control Section that this product or material fails to meet the requirements
-f ire z pplicable building code,
I h s p-nshx is approved as described herein, and has been designed to comply with the Florida Building Code
r-' ad. ng the High Velocity Hurricane Zone of the Florida Building Code.
4I .SCR]PTION: GAF Timberline Ultra HID' Shingles
f,,:.BrItANG: Each unit shall bear a permanent label with the manufacturer's time or logo, city, state and following
a emenu "'vliami-Dade County Product Control Approved", unless otherwise noted herein.
i IENEWAT. of this NOA shall be considered after a renewal application has been filed and there has been no change
-he applicable building code negatively affecting the performance of this product.
i,.Ri IINATION of this NON will occur after the expiration date or if there has been a revision or change in the
erl=.s, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for
rl Is, Advertising or any other purposes shall automatically terminate this NOA. Paiture to comply with any section of
NC shall be cause for termination and removal of NOA.
.`iW RTYSEMENT: The NOA number preceded by the words Miami -Dade County, Florida, and followed
the expiration date may -be displayed in advertising literature. If any portion of the NOA is displayed, then
=.I to! I be done in its entirety.
i9 SPECTION: A copy ofthis entire NOA shall be provided to the user by the manufacturer or its distributors and
i be available for inspection at the job site atthe request ofthe Building Official.
I P ")A renews and revises NOA No. 14-1022.21 and consists of pages I through 5.
r. st:: mito:d documentation was reviewed by Freddy Seminu
[ r NOA No.:18-0123.01
ECWTv Expiration Date: 04/22f23
Approval Date: 03/22/18
Page I of 5
ROOFING ASSF.MRLY APPROVAL
Category: Roofing
Sub -Category: Asphalt Shingles
Materials: Laminate
Deck Type: Wood
SCOPE
This approves GAF Timberline Ultra LIDO Shingles as manufactured
by GAF described in Section 2 of this Ncticc ct
Acceptance.
PRODUCT DESCRIPTION
Product Dimensions Test
Product Description
Specifications
GAF Timberline Ultra 11DQ9 1344x39% TAS110
Fiberglas reinforced heavy weightasphalt ices
Mamufa,[ ing
shingle, with a laminate profile.
Locations 4 1, 2, 3.
MANUFACTURING LOCATION
I. Michigan City, IN
2. Mycrstown, PA
3. Tuscaloosa AL
EVIDENCE SUBMITTED
TestAgencv Test Identifier
TestName/Report Date
Underwriters Laboratories, Inc. ASTM D 3462
4788201324 01/02i17
ASTM D' 462
4788201324 01/0-S17
ASTM D 3462
4788201324 12/20i 17
TAS 107
02NK41811 11/]1,02
TAS 107
03CA35209 10/1W03
TAS t07
05CA42840 11/11/05
TAS 107
06CA10139 09/13/06
PRI Asphalt Technologies, Inc. TAS 100
GAF-046-02-01 04/05./04
TAS 100
GAF-103-02-01 11/1<;/05
ASTM D3462
GAF-103-02-02 11/16/05
LRVDTATIONS
1. Fire classification is not part of this acceptance; refer to a current
Approved Roofing Materials Directory o
tire ratings of this product.
2. Shall not be installed on roof mean heights in excess of 33 ft.
3. All products listed herein shall have a quality assurance audit in
accordance with the Florida Building Codeanc,
Rule 61G20-3 of the Florida Administrative Code.
INSTALLATION
mianiAnpecauary
NOA No.: 18-6123 r'
Expiration Date: 0422 2;=
Approval Date: 03/22 ri l
page 2, f::
I _ Shingles shall be installed in compliance with Roofing Application Standard RAS 1 15.
2. Flashing shall be in accordance with Roofing Application Standard RAS 115
3. The manufacttver shall provide clearly written application instructions.
4. Exposure and course layout shall be in compliance with Detail 'A', attached.
5. Nailing shall be in compliance with Detail TV, attached.
L "-, 3E_ANG
ihiugles shall bear the imprint or identifiable marking of the manufacturer's name or logo, city and state of
*ua--if anturing facility, and following statement: "Miami -Dade County Product Control Approved" or the Miami -Dade
, ocot/ Product Control Seal as shown below.
MIAM14)ADE COUNTY
[WILDING PERMIT REQUIREMENTS:
' r ilication for building permit shall be accompanied by copies of the following:
i_ 'I ilis Notice of Acceptance.
%ny other documents required by Building Official or Applicable building code in order to properly evaluate the
=usmllation of this material.
11[.,,,1 MECwxtry NOA No.: 18-0123.07
err �'' i7r Expiration Date: 04/22/23
Approval Date: 03/22/18
Page 3 of 5
DETAIL A
COURSE LAYOLT
Expo! w i
NOA No IR P
MJN IkMDE COUNTY Expuation Di tr C 1 2t .:
Approval ❑ W (1 L
pag' 4;.
DETAIL B-13-1/4" X 39-3/8"
OVERALL DIMENSIONS AND NAILING PATTERN
39-3/8"
6 fasteners — 72" --- 72" —
Front Side (Maximum Slope 21:12)
abSealant
" 2„
Back Side
T
GAF TIMBERLINE ULTRA HD"
END OF THIS ACCEPTANCE
Release
Tape
1"
1
5-5/8"
3/8"
IF Y(yrMl [wo� NOh Na: 2
A.pW ESp1YAt10IDate: 04/22/23
Approval Date: 03/22A8
Page 5 of 5
MIAMI.
,..d° MIAM I -DARE COONLY
D}pAR'I:ME'NT'OP REGULATORY AND ECONOMIC RESOURCES ItER PRODUCT CONTROL SECTION
SO OD 4VD I ODE ARMIN ISTRATIDM
N DIVISION ) 118 SW 2651;a Raom208
iemi, Flea 331I5-2474
'I(786) 315-2590 F (786) 315-2591
',,')TICE OF ACCEPTANCE (NOA) www a
7 S.MRD Rmldmg Products LLC
22090 O Street
.loplin, MO 64801
SCOPE:
"li s T:OA is being issued underlie applicable cedes and regulations governing the use of construction materials. The
..: witntation submitted has been reviewed and accepted by Miami -Dade County RER - Product Control Section to be
., id in Mimn i Dade County and other areas where allowed by the Authority Having Jurisdiction (AHJ).
7 his NOA shall not be valid after the expiration date stated below. The Miami -Dade County Product Control Section
'. Muni Dade County) and/or the AHJ (in areas other than Miami Dade County) reserve the right to have this product
u t �;ial tested for quality assurance purposes. If this product or material fails' to perform in the accepted manner, the
, al !, turer will incur the expense of such testing and the AHJ may immediately revoke, modify, or suspend the use
,[ SaUt product or material within their jurisdictimt. RER reserves the right to revoke this acceptance, if it is
--:rrc-ined by Miami -Dade County Product Control Section that this product or material fails to meet the requirements
e applicable building code.
i p-;due': is approved as described herein, and has been designed to comply with the Florida Building Code
_ r ur g the High Velocity Hurricane /one of the Florida Building Code.
DE'Soi UPTION: Ti Synthetic Guard'" and Synthetic Guard'" Plus Roof Underlayment
l,r R. JNG: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state and following
r c!. it: "Miami -Dade County Product Control Approved", unless otherwise noted herein.
I l I:N LINAL of this NOA shall be considered after a renewal application has been filed and there has been no change
-; i he applicable building code negatively affecting the performance of this product.
fR+OINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
I -ere s, use, and/or manufacture of the product or process. Misuse of this NOA as an endorsement of any product, for
- cs, o lvertising or any other purposes shall automatically terminate this NOA. Failure to comply with any section of
M A shall because for termination and removal of NOA.
V2RTISEMENT: 'Ihe NOA number preceded by the words Miami -Dade County,. Florida, and followed by the
rL _an date may be displayed in advertising literature. If any portion of the NCA is displayed, then it shall be done
1 9 luet,,.
u' PE CTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
'I beavailable for inspection atthejob site atthe requested the Building Official.
s ?=OA revises NOA #f 17-1030.03 and consists of pages 1 through 4.
s, mittad documentation was reviewed by Alex I igera.
_� �;- -.
�SB'E
�4i�[I fIXNdry NOA No.: 19-1107.07
Expiration Date: 02/21/24
Approval Date: 121l9/19
Page 1 of 4
ROOFING COMPONENT APPROVAL
Cateeorv: Roofing
Sub-Cateeorv: Underlayment
Material: Polypropylene
SCOPE:
This approves TAMKO Synthetic Guard'" and Synthetic Guard"" Plus Roof Underlayment as described In foie
Notice of Acceptance; designed to comply with the Florida Building Code including the High Velocity Hurricane Zone
of the Florida Building Code.
TRADE NAMES OF PRODUCTS MANUFACTURED OR LABELED BY APPLICANT:
Test
Product
Product Dimensions
Specification
Description
TAMKO Synthetic 48.1"x 250.5'
ASTM D226
Non -woven synthetic undedayment with a black
Guard'" Underlayment rolls
Type E
coated polypropylene spun bond fabric surface A
polypropylene 5x5 scrim, and a black backside
coating.
TAMKO Synthetic 48.1"x250.5
ASTM D226
Non -woven s}'nibefic underlayment with a grey
Guard'" Plus Roof rolls
Type 11
coated polypropylene spun bond fabric surface A
Underlayment
polypropylene I scrim, and a grey backside
coating.
MANI FACTURING LOCATION:
1. M.L. #1
EVIDENCE SUBMITTED:
TestAEencv
Test Identifier
TestName/Report D-21e
PRI Construction Material
"IAP-393-02-01
ASTM D226 09/27;2017
Technologies
'rypelt
TAP-394-02-01
ASTM D226 09/27,201'7
'Type 11
NOA No.: Is, 107.0'
NLeAiADADE r Expiration Date: 02/21:2+;
Approval Date: Lips19
Page 2 os .,
LIMITATIONS:
1. Fire classification is not part of this acceptance; refer to a current Approved Roofing Materials Directory for
fire ratings of this product.
2. This acceptance is for prepared roofing applications. Minimum deck requirements shall be in compliance whh
applicable building code.
3. TAMKO Synthetic Guard'" and Synthetic Guard'" Plus Roof Underlayment shall be applied to a smooth,
clean and dry surface with deck free of irregularities. All nails in the deck shall be carefidly checked for
protruding heads. Re -fasten any loose decking panels. Sweep the deck thoroughly to remove any dust and
debris prior to application.
4. TAMKO Synthetic Guard" and Synthetic Guard— Plus Roof Underlayment shall not be but mopped
refer to manufacturer's published literature for product compatibility, additional installation recomendatinrs,
product safety guidelines and instructions.
5. TAMKO Synthetic Guard" and Synthetic Guard'" Plus Roof Underlayment shall not be applied ovaal
existing roof membrane as a recover system.
6. TAMKO Synthetic Guard'" and Synthetic Guard' Plus Roof Underlayment shall not be left exposed as a
temporary roof for longer than 30 days of application.
7. TAMKO Synthetic Guard" and Synthetic Guard'" Plus Roof Underlayment are components used is roof
system assemblies. Roof system assemblies are approved under a specific Notice of Acceptance. Refer to
Prepared Roofing system Product Control Notice of Acceptance for listed approval of this product with steel is
prepared roofing products.
8. TAMKO Synthetic Guard7' and Synthetic Guard'" Plus Roof Underlayment may be used with any
approved roof covering Notice of Acceptance listing TAMKO Synthetic Guard" and Synthetic Guard°
Plus Roof Underlayment as a component part of an assembly in tile Notice of Acceptance. 1fTAMKO
Synthetic Guard" and Synthetic Guard" Plus Roof Underlayment are not listed, a request may be n:ad:
to the Authority Having Jurisdiction (AHJ) or the Miami -Dade County Product Control Department for
approval provided that appropriate documentation is provided to detail compatibility of the products, will,
uplift resistance, and fire testing results.
9. All products listed herein shall have a quality assurance audit in accordance with the Florida Building Co6e ant
Rule 61 G20-3 of the Florida Administrative Code.
10. All membranes or packaging shall bear the imprint or identifiable marking of the manufacturer's name or loge,
city, state and the following statement "Miami -Dade County Product Control Approved" or the Miami -Dade
County Product Control Seal as shown below.
MIAMI-DAD COHNTY
END OF THIS ACCEPTANCE
minmxoaoearutm NOA No.: 19-1107 fn''
Expiration Date: 0123
Approval Date: 12,19.If,
Page 4 .
1 NBTALLt.TION SPECIFICATIONS: (Single Layer: Slopes of 2A2 or greater)
1. TAMKO Synthetic Guard" and Synthetic Guard"° Plus Roof Underlayment Roof Underlayment shall be
installed in strict compliance with applicable Building Code.
2. TAMKO Synthetic Guard'' and Synthetic Guard' Plus Roof Underlayment shall be installed with a
minimum 4-inch horizontal lap and 6-inch vertical laps in a shingle layer fashion. Vertical laps in a
succeeding course shall be staggered from those in preceding course by minimum 6-feet.
3. TAMKO Synthetic Guard" and Synthetic Guard" Plus Roof Underlaytrtent shall be fastened with
approved roofing nails and tin -caps spaced 6" o.c. at all laps and staggered rows fastened 12" c.c. in a grid
pattern in Cie field ofthe roll between The overlaps.
4. TA MKO Synthetic Guard" and Synthetic Guard's Plus Roof Undedayntent may be used with Asphaltic
shingles, Wood shakes and shingles, Non-structural metal roofing, and quarry slate.
5. To fire classification of specific roof assemblies using TAMKO Synthetic Guard"' and Synthetic Guard'
Plus Roof Underlayment refer to a current Approved Roofing Materials Directory for fire ratings of this
pr( duct.
BUILDING PERMIT REQUIREMENTS:
o )I ration for building permit shall be accompanied by copies of the following:
.. This Notice of Acceptance.
,.. Any other documents required by the Building Official or applicable building code in order to properly evaluate
the installation ofthis material.
� NOA No.: 19-1107.07
91 ina v''. Expiration Date: 0221/24
Eff. Approval Date: 12/19/19
Page 3 of 4