HomeMy WebLinkAboutBW Res Low Elec WH 19 to 50 galNM
BRADFORD WH/TEW
W A T E R H E A T E R S
Residential Lowboy
Electric Water Heater
The Lowboy Electric Models Feature
■ Blanketed & Non -Blanketed Models Available —Non -Blanketed models
(RE1201-6, RE230LN6, RE240LN6) help to decrease overall installation
time and are perfect for new construction applications. Blanketed models
- (RE1301-6, RE2301.6, RE2401-6, & RE2501_6) provide more installation flexibility
and are ideal for replacement applications.
■ Low Restrictive Brass Drain Valve —Durable tamper proof design.
Photo is of
RF24OLN6
Copper Screw Type Immersion Element
UNCOLOI type immeram aemmv avalnt le upon re umO
■ Fully Automatic Thermostat Controls —Fast acting surface -mount
thermostat with high limit energy cut-off (manual reset) for safety.
■ Direct Heat Transfer with Immersed Elements —Transfers heat directly
and efficiently to the water. Screw -in style.
■ Factory -installed Hydrojer Total Performance System ---Sediment
reducing device that also increases first hour delivery of hot water while
minimizing temperature build-up in tank.
■ Vitraglasa Lining —An exclusively engineered enamel formula that provides
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglasm) is fused to the steel surface by firing at a temperature of
over 1600eF (871 °C).
■ Insulation System—Non-CFC foam covers the sides and top of the tank,
reducing heat loss. This results in less energy consumption, improved
efficiencies, and jacket rigidity. Blanketed models additionally use a supplied
flexible fiberglass insulation blanket.
■ Water Connections--,V4" NPT factory -installed true dielectric fittings extend
water heater life and simplify water line connections.
■ Factory -Installed Heat Traps —Design incorporates a flexible disk that
reduces heat loss in piping and eliminates the potential for noise generation.
(Except for RE1201-6).
■ Protective Magnesium Anode Rod —Provides added protection against
corrosion for long-term, trouble -free service.
■ Non -Simultaneous Operation —Non -Simultaneous operation indicates only
one heating element will operate at a time and is standard construction from
the factory. Simultaneous Operation indicates both heating elements have the
potential to operate at the same time and is available as an option (must be
specified when ordering).
■ Voltages Available-120V, 208V, 240V, 277V, 480V.
■ Single Phase or Three Phase Operation Available-120V & 277V may
only be wired for single phase operation.
■ T&P Relief Valve —Installed, side T&P is standard. Optional top T&P location
is available.
■ Design evaluated by ETL in accordance with Part 280.707(d) of HUD
Mobile Home Construction and Safety Standards for Energy Efficiency.
0%�F��� 6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limitan Limited Warranty Componant Par
(ts.
— 0. For more informmation on warranty, please visit www.braoforowhite.co
hrmek Ime,uw ���IIY11 For products installed in USA, Canada and Puerto Rico. Some states do not allow limitations on warranties. See complete
—`-- copy or the warrantyincluded with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5.682.666; 7.634.976. 5.660,165; 5.954,492: 6U56,542; 6.935,280: 5,372.185; 5A85,879; 5.574,824; 7.971.560: T992.526
6.684.821, 6,442, 178; 7,334,419; 7,866,168: 7,270.087; TOD7.748: 5.596,952; 6,142.216; 7,699,026: 5,341,770; 7,337,517: T.665211.. 7,665.210: 7.063.132: 7.063,133; 7.559,293: 7.900,589, 5.943.984
8.092.888; 5,988.117; 7.621.238; 7.650,859: 5.761.379. 7.409.225; 5277.171: 8,146.772; 7,458.341; 2262,174- OTHER Us. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS
2.314.845; 2,504.924; 2,108.186:2.143,031; 2.409271; 2,548.958; 2.112,515:2,476,685; 22M.007; 4092.105; 2.107.012. 11MOW' and "lop am re9Nmrid Irademadn o1 Rradlom Wake Comerallan
1203-C-0317
Residential Electric Water Heater
Lowboy Models
C.E.C. Listed
Ma9el
Number
Capacity
1st HOW
U.S. Impp. Ratio Eaergp
Gel. G'll (Gala Factor
Recovery
99 F Rise
U.S. Imyy.
GPH' GPH'
A
Floor to
Heater
Top
In.
8
Jackal
als.
in.
C
Floor to
Water
Conn.
in.
0
Floor to
T&P
cams.
in.
Approx.
Shipping
Weight
lbs.
RE120L6
19 16
— —
21 18
247/.
is
25eh
19 V,/241/o
65
RE1301-6"
28 23
43 0.95
21 18
29e/,
20
319.
211/e
99
RE230LN6
28 23
43 0.95
21 18
30
23
30%
23,14
102
RE23OL6"
28 23
45 0.95
21 18
291/.
22
30e/.
2411.130%
108
RE2401.116
37 31
50 0.95
21 18
32
291h
33 rh
23eh
126
RE240L6""
38 32
55 0.95
21 18
32e/e
24
334z
144�/33s/e
140
RE2501-6—
47 39
58 G95
21 18
33eh
26
343A
249z/34%
173
Roder
Number
Capacity
Uters
lsl Hour
Rating Energy
niters) Factor
Recovery
SIT Rise
Liters/
HOW
A
Floor to
Heater
Top
miss.
8
Jacket
Dia.
ram.
C
Floor to
Water
coast.
ram.
D
FImr to
Tat
Conn.
ram.
Approx.
Shipping
WelyM
kg.
RE1201.6
T2
—
80
632
457
651
48B 1632
29
RE13016—
106
163 0.95
g0
756
508
794
600
45
RE230LN6
106
163 0.95
so
762
584
784
591
46
RE2301-6—
106
170 0.95
80
759
559
781
6131778
49
RE24OLN6
140
189 0.95
80
813
LIU
845
sm
57
RE240L6"
144
208 D.
80
8129
610
951
613/854
64
RE25aL6"
178
220 0.95
s0
854
66U
883
522/879
1 78
"Models include supplied insulation blanket (2" thick).
Dimensions in charts above do not include blanket
thickness.
For 10 year models, change suffix "6" to "10".
Based on 450OW/4500W. Non -Simultaneous
operation.
All models available with optional top T&P location
(Plugged).
t Exempt from ASHRAE 90.1 b (current stendaro.
Energy Factor and First Hour Rating are based on
the latest AHRI directory listings.
01"H Temperabtrb Rim'F
WaNwe 1 60 80 90 100 120
6000W 1 41 31 28 25 21
A(GPH based on Non -Simultaneous
operation, when Simultaneous
operation the GPH will approximately
double.)
'Not available on RE130L and RE230LN6.
Osommal L� '.do
Top T&P IRE730L6. RF230Lr16,
Location RE2/OLM, A RE2501_6 only)
e"D" dimension listed as side top.
General:
Meets NAECA Requirements.
All models ETL listed. These heaters are wired inter -locking (Non -Simultaneous, Single Phase) 240V with two 450OW elements, unless otherwise specified.
All water and electrical connections are 3/4" NPT (19mm).
All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa.)
Dimensions and specifications subject to change without notice in acmrdence with our policy of continuous product improvement.
be For U.S. and Canada field service, contact your professional installer or boat Bradford While sales representative.
RAwFO" g9WTE Sales 8003&2831 • Fax 215-641-1670 / Technical Support 800 • Fax 269-795-1089 • Warranty 800-531-2111 • Fax 269-795-1089
Ambler, PA b Internabor l: Telephone 215-641.M a Telefax 215-641-9750 / wWxr.bradlordwhile.com
BRADFORD 1bWffE-C4NADA'1NC. Sales/Technical Support 866a0.0961/905-2384100-Fax 905-23B-0105/ www.bradfordwhite.com
Built to be the Best TM
1203-C-0317 02017. Bradford White Corporation. All rights reserved. Printed in U.S.A.