HomeMy WebLinkAboutPool Fence info - tt'r'tt!/'P.:r._•fir, p ..
MAY 17 201,
PERATTING
St. Lucie County, FL
Life Saver Pool Fence Systems, Inc.
Removable Pool Safe Mesh Barrier Fencing Technical Specifications
h' g P
Life Saver Pool Fence Systems,Inc. has manufactured removable pool safety fencing
for over 13 years and has continuously evolved their methods and materials, often-time
leading industry wide changes. A Manufacturer's Limited Lifetime Warranty guarantees
every system for as long as they own it. Life Saver Pool Fence meets and exceeds all
code requirements throughout Florida. Below you will find technical specifications on the
components used in assembling the Life Saver Pool Fence.
Textilene Mesh
Textilene mesh has been used as the highest quality material to the pool fence industry
for over 15 years. Laboratory testing shows its strengths to surpass all code specifications
and applicable ASTM standards.
Item Number: T70 DFS
Product Description:
Fabric using .025" dia. vinyl-coated 1000 den. polyester core yarns in the warp
and fill.
Attribute ASTM Warp Fill Typical
Construction, end/inch D3775-96 13.0 + .5 11.0 + .5
Weight, oz/yd2 D3776-96 -- -- 9.9
Tensile Strength (grab), Ibf D5034-95 221.4 213.3
Tensile Strength (strip), Ibf D5035-95 194.9 153.8
Tear Strength, (Trapezodial), Ibf D1117-97 65.4 54.0
Ball Burst, Ibf D3787-89 335
Bursting Strength, psi D3786-89 433
Elongation, % D5035-95 24.3 21.6
Abrasion Resistance D3884-92 No exposure of core yarn
(CS10/500 cycles/with no added weight)
Flammability Rating CS-191-53 & CA 117E
Weatherability, 1200 hours G53-96 No discoloration
Mildew Resistance G21-96 No growth
The above results are a representative of real data from single test samples.
Presently no specification is incorporated.
Warp refers to the horizontal threading while fill refers to the vertical threading. As
shown, all testing confirms Textilene mesh meets and, on all strength tests,amply
exceeds the set code requirements.
MAY 17 2017
Reinforced 1"Aluminum Pole PERIAFM,G
St. Lucie County, FL
Life Saver Pool Fence uses Reinforced 6063T6 1"Aluminum Poles spaced no more than
36"apart. Mesh is secured to the pole via an aluminum cove molding using roundhead
screws spaced no greater than 6".
The temper rating of T6 scores the highest tensile strength(30 ksi)within the 6063 alloy
classification.
On July 14th,2003, Life Saver Pool Fence Systems,Inc. contracted Nutting Engineers of
Florida,Inc., an ASTM standards testing lab established in 1967,to test the pole strength
as per the Florida Residential Code 4501.17
At the time of testing,a lateral force was applied to a single pole at a measurement of 36"
from the surface of the deck. In the test,the resistance to lateral pressure was found to
exceed 70 lbs. of pressure before failure on any single pole in a free standing installation,
thus exceeding the 52 lbs. of horizontal force prescribed by the Florida Building Code.
MAY 1 7 2@r
LIFE SAVER POOL FENCE SYSTEM SPECIFfiff TONS
General Description:
Pool fence designed specifically to provide a barrier around residential swimming pools
for toddlers and young children. Life Saver Pool Fence Systems®does not have any
gaps, openings, indentations, protrusions, or structural components that could allow a
young child to crawl under, squeeze through, or climb over the barrier. Our Perma
Locking System" will not allow the barrier to be removed without the aid of tools.
Life Saver Pool fence is manufactured and installed in compliance with the Florida
Residential 4501.17 and the Florida Statute.
System:
Tension based system utilizing a series of 15 foot sections of fence with inserts for
mounting in non-conducting polypropylene sleeves core drilled 4 inches deep into a
concrete deck or other substantial surface, connected in series at the top with a
spring loaded safety latch. One end of barrier requires tool to remove it. Non
removal end secured to fence post and pool deck by a V L Brace for 360
applications. Non removal end secured by spring Perma Lock" with nut/bolt in
screen enclosure applications.
Construction:
Mesh: Polyester mesh fabric with a mildew resistant polyvinyl coating to provide for
years of use in direct sunlight.
Continuous basket weave with a tensile strength rating of 270 lbs. Per inch
making it impossible to rip under normal use.
Color selection is black, white, green or brown. Available in 48 or 60 in.heights.
Bordered on all four sides by a reinforced vinyl material with a rating of 387
lbs. To prevent sagging and provide the necessary tension to insure the fence's
integrity for its intended purpose both at the top and bottom.
The mesh is pre-mounted on aluminum support poles and secured by aluminum
cove molding strips.
Poles: Poles are constructed of marine grade aluminum, black, white, green,tan and
brown powder coated or silver finish.
Pole spacing is at 36 inches.
Stainless steel screws (14) are utilized for securely attaching the aluminum cove
molding to the poles and mesh.
Surface of the poles are finished for handling and to prevent injuries from
physical contact.
The poles are capped to provide a neat finished appearance.
--- --- Revised 11/10/16