HomeMy WebLinkAboutNotice of Acceptance MIAMI-DAD,E . MiAMI-DARE COUNTY
PRODUCT CONTROL SECTION
i 1905 SW 26 Street,Room 208
DEPARTMENT OF'REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33175-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F(786)31525-99
NOTICE OF ACCEPTANCE(NOA) w vt-w.tni&ntiditde-<r.•,eco!aomv
Cer_tainTeed-Corporation
IS Moores Road
Malvern,PA 19355
SCOPE:
This NOA is-being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section to be
used in Miami Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration`date stated below.The Miami-Dade County Product Control Section
(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right to have this
product or material tested for quality assurance purposes.If this product or material fails to perform in the accepted
manner,the manufacturer will incur the expense of such testing and the AHJ may immediately revoke,modify,or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the
requirements of the applicable building code.
This product is approved as described herein,and has been designed to.comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: CertainTeed Modified Bitumen Roofing Systems over Wood Decks.
LABELING:,Each unit shall bear.a permanent label with the manufacturer's name or logo,city,state and following
statement: "Miami-Dade County Product Control Approved.",unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or ifthere has been a revision or change in'the
materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any product,
for sales,advertising or any other purposes shall automatically terminate this NOA.Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida, and followed by the
expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then it shal i be done
in its entirety. -
INSPECTION:A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors and
shall be available for inspection at the job site of the request of the Building.Official.
This NOA revises NOA#14-0224.03 and consists of pages 1 through 42.
The submitted documentation was reviewed by Alex Tigera.
NOA No.:I"529.02.
Expiration Date:�06119118
j Approval Date- 09/24/15
+ Page 1 of 42
v
Membrane Type: SBS Modified
Deck Type I I: Wood,Non-Insulated
Deck Description: 19/32 or greater plywood or wood plank
System Type-E(4):" Base sheet mechanically fastened.
All General and System Limitations.apply.
Base Sheet: One ply of All Weather/Empire Base,Sheet,Yosemite Venting Base Sheet,Flexiglas Base
Sheet,Flintlastic Poly SMS Base Sheet,Flintlastic Ultra Poly SMS Base Sheet,Glasbase Base
Sheet or Flititglas Premium Ply Sheet Type VI mechanically attached as detailed below.
Fastening: Base sheet shall be lapped 4"and fastened with 11 ga.annular ring shank nails and approved tin
naps 8"o.c. in the lap and three rows staggered in the center of the sheet 8"o.c.
J
Ply Sheet: One ply of All Weather/Ernpire Base Sheet,Flintlastic Ultra Poly SMS Base Sheet,Glasbase'
(Optional). Base Sheet,Flexiglas Base Sheet,Flintlastic Base 20, Flintlastic Poly SMS Base Sheet or one
or more plies of Flintglas Ply Sheet Type IV or Flintglas Premium Ply Sheet Type VI adhered in
a full mopping of approved asphalt applied within the EVT range and at a rate of 20-40 lbs./sq.
or one ply of Black Diamond Base Sheet or Flintlastic Ultra Glass SA self-adhered or F1MMRstic
Ultra Poly SMS Base Sheet torch adhered.
Memfiraner One ply of Flintlastic GMS,Flintlastic GMS CoolStar,Flintlastic Premium GMS;Flintlastic
Premium GMS CoolSiar,Flintlastie FR Dual Cap;Flintlastic FR P,Flintlastic_FR P CoolStar,
R P
Flintlastic Premium FR-P,Flintlastic Premium F 'CoolStar,Flintlastic FR Cap.30,Flintlastic
FR Cap 30 CoolStar adhered to ply sheet with approved mopping asphalt applied within the
EVT range and e a rate of 20 to 40 lbs./sq.or Flintlastic FR Cap 30 T or Flintlastic FR Cap 30
T CoolStar torch adhered to ply sheet.
Surfacing: Any of the approved surfacing/coating options listed in Table 4.
(Optional)
Maximum Design -52.5 psf.(See General Limitation#7)
Pressure:
M NOA No.:14-0529.02
Expiration Date: 06/19/19
Approval Date: MUM
Page 24 of 42
,. v
MlAM}, MIAMI-DARE COUNTY
PRODUCT CONTROL SECTION
11805 SW 26 Street,Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33 l 75-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315 2590 F(786)31525-99
NOTICE OF ACCEPTANCE(NOA) ���: i.A33fiiitltFicic.0±./e^tzt{ t4'
CertainTeed Corporation
18 Moores Road'
Malvern,PA 19355
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The
documentation submitted has been reviewed and accepted by Miami-Dade County RER-Product Control Section.to be
used in Miami Dade County and other areas';Aere allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control Section
xp ty
(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right to have this
product or material tested for quality assurance purposes.If this product or material fails to perform in the accepted
manner,the manufacturer will incur the expense of such testing and the AHJ may immediately,revoke,,modify, or
suspend the use of such product,or material within their jurisdiction. RER reserves the right to revoke this acceptance,
j if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the
irequirements of the applicable building code.
This product is approved as described herein,and has been designed to comply with the Florida Building Code
including the High Velocity,Hurricane Zone of the Florida Building Code.
DESCRIPTION: CertainTeed Modified Bitumen Roofing Systems over Wood Decks.
i
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo,city,state.and following
statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no ch ange
.; in the applicable building code negatively affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date Or if materials,use,and/or manufacture of the there has bchange
product or process.lVlisuse of this NOA as an endorsement of ay product,
far sales,advertising or any other purposes shall automatically terminate this NOA.Failure 1
of this NOA shall be cause to com for termination and removal of NOA. P Y with any section
ADVERTISEMENT: The NOA number preceded by the words Mi
am
expiration date may be displayed in advertising literature, If i-Dade County, Florida, and followed by the
in Its entirety' any Portion f the NOA is displayed,then it shal INSPECTION, w ! be done
shall be available A copy of this entire NOA-shall be provided to the user
� far ins
pection at the job site by the manufacturer
fl Thrs NOA revises the regUest Of the Building of]t+S d1SfT1�Ut0IS and
The submi NOA#I4-0224.03 Official.
" •. revises
documentatien and consists of Pages 1 thrvu
Was reviewed bYAlex Tige,� gh 42.
M��'bAp
�1
f SOLC, f ,.s-
H r 4j...
yid=:•
t�llaMl t7 .' ' MIAMI-DADE COUNTY
;;:;`.:
C-, PRODUCT CONTROL SECTION
11805 SW 26 Street,Room 208
DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33 l 75-2474
BOARD AND CODE ADMINISTRATION DIVISION T(786)315 2590 F(786)31525-99
NOTICE OF ACCEPTANCE (NOA)
CertainTeed Corporation
18 Moores Road
Malvern,PA 19355
SCOPE:
This NOA is being issued under the applicable rules and regulations governing the use of construction materials. The.
documentation submitted has been reviewed and.accepted by Miami-Dade County RER-Product Control Section to be
used in.Miami Dade County and other areas where allowed by the Authority Having Jurisdiction(AHJ).
This NOA shall not be.valid after the expiration date stated below. The Miami-Dade'County Product.Control'Section
(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right to have this
product or material tested for quality assurance purposes.If this product or material fails.to perform in the accepted
manner,the manufacturer will incur the expense of such testing and the AHJ may immediately revoke,modify, or
suspend the use of such product or material within their jurisdiction. RER reserves the right to revoke this acceptance,
if it is determined by Miami-Dade County Product Control Section that this product or material fails to meet the
requirements of the applicable building code.
This product is approved as described herein,and has been designed to comply with the Florida Building Code
including the High Velocity Hurricane Zone of the Florida Building Code.
DESCRIPTION: CertainTeed Modified Bitumen Roofing Systems over Wood Decks:
LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo,city,state-and following
statement: "Miami-Dade County Product Control Approved",unless otherwise noted herein.
RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no change
in the applicable building code negatively.affecting the performance of this product.
TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in the
materials,use,and/or manufacture of the product or process.Misuse of this.NOA as an endorsement of any product,
for sales;advertising or any other purposes shall automatically terminate this NOA.Failure to comply with any section
of this NOA shall be cause for termination and removal of NOA.
ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County, Florida,,and followed by the,
-expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then it shall be done
in its entirety. -
INSPECTION: A copy of this entire NOA shall be provided to'the user by the manufacturer or,its distributors and
shall be available for inspection at the job site at the request of the Building_Official.
This NOA revises NOA#14-0224.03 and consists of pages 1 through 42.
The submitted documentation was reviewed by Alex Tigers
NOA No,: 14-0529.02
MIAMI- E colJN7Y { '
'no' ' Expiration Date: 06/19%18
Approval Date: 09/24/15
Page 1 of 42
Membrane Type: .- SBS Modified
Deck Type 1I: Wood,Non-Insulated
Deck Description: "/332" or greater plywood or wood plank
System Type E(4): Base sheet mechanically fastened.
All General and System Limitations,apply.
Base Sheet: One ply of All Weather/Empire Base Sheet,Yosemite Venting Base Sheet,Flexiglas Base
Sheet,Flintlastic Poly SMS Base Sheet,.Flintlastic Ultra Poly SMS Base Sheet, Glasbase Base•
Sheet or Flintglas""Prey iurn Ply Sheet Type Vi mechanically,attached as detailed below.
Fastening: Base sheet shall be lapped 4" and fastened with-11 ga-annular ring shank nails and,approved:tin
.caps 8"o.c. in the lap and three rows staggered in the center of the sheet 8"o.d
Ply Sheet: One ply of All Weather/Empire Base Sheet,Flintlastic Ultra Poly SMS Base Sheet,Glasbase
(Optional) Base'Sheet,Flexiglas Base Sheet,Flintlastic Base 20 ".Flintlastic Poly SMS Base Sheet or one
'or more plies of Flintglas Ply.Sheet Type IV or Flintglas Premium Ply Sheet Type',ViAdhered in "
a full mopping of approved asphalt applied within the EVT range and at,a'r'ate of 20-40 lbs./sq..
or one ply of Black Diamond Base Sheet or Flintlastic Ultra Glass SA self-adhered or Flintlastic
Ultra Poly SMS-Base Sheet torch adhered.
Membrane: One ply-of Flintlastic GMS,-Flintlastic GMS CoolStar,Flintlastic'Premium GMS,Flintlastic'
Premium GMS CoolStar,Flintlastic FR-Dual Cap-,Flintlastic FR P,Flintlastic FR-P CoolStar,
Flintlastic Premium FR-P;Flintlastic-Premium FR P CoolStar,"Flintlastic FR Cap 30,Flintlastic
FR Cap 30;CoolStar adhered to ply sheet with approved mopping asphalt applied within the
EVT range and at a rate of 20 to 40 lbs./sq.or Flintlastic FR Cap 30 T,or Flintlastic FR-Cap 30
T CoolStar torch adhered to ply sheet.
Surfacing: Any of the approved surfacing/coating options listed in Table 4.
(Optional)
Maximum Design -52.5 psf. (See General Limitation#7)
Pressure:
MIAMFDADE COUNTY
ADA No.: 14-0529.02
••• • Expirimon Date: 06119118
- 'Appi•oval Date: /15
42