HomeMy WebLinkAboutHoffman Regulator SpecificationsApplication
Ideal for use as a first stage regulator on any domestic size ASME or
DOT container in propane gas installations requiring up to 1,500,000 LISTED
BTU's per hour. The regulator is factory set to reduce container
pressure to an intermediate pressure of approximately 10 PS1G.
Features
• Compact design can be connected to a service valve using either
a POL adapter or a RegO product pigtail.
Large threaded W F.NPT bonnet vent can easily be piped -away
underground installations without the need of glue kits or extra
adapters.
• Non Adjustable
• Large flow orifice resists freeze ups due to water concentration in
LPG vapor.
• Design provides for good flow regulation at both high and low
container pressures.
• Built in relief valve and travel stop comply with NFPA 58 over
pressure requirements.
• Incorporates V RNPT downstream pressure tap for an easy
inline check of the regulator's delivery pressure.
• Molded diaphragm provides an o-ring type seal between the
body and bonnet.
• Body and bonnet are assembled in the USA using the unique,
patented RegUlok seal system.
• Fully painted in brilliant red for complete corrosion protection.
• Mounting bracket available as an accessory: part number 2302-31.
Materials
Body............................................................................................ Zinc
Bonnet.........................................................................................Zinc
Spring........................................................................................ Steel
Seat Disc.................................................................Resilient Rubber
Diaphragm...........................Integrated Fabric and Synthetic Rubber
Information
LV3403TR
3.56"
_._.... --- ------- ....... ......... ._._.___ .,...__ ..__..._
FLOW PROPANE
LV3403TR IOver Outlet
LV3403TRV9 W F.NPT %" F.NPT 7/32' 10 PSIG 9.00 1,500,000
" Maximum flow based on inlet pressure 20 PSIG higher than the regulator setting and delivery pressure 20% lower than the regulator selling and delivery pressure 20% lower than the setting,
A14 MEGO 100 RegO Dr Elon, NC 27244 USA www.regaproducts.com +1 (335) 449 7707
Application
Designed to reduce first stage pressure of 5 to 20 PSIG down to
burner pressure, normally 11" w.c. Ideal for medium commercial
installations, vapor meter installations and normal domestic loads.
Features
• 90 degree right angle inlet to outer connection for meter or
standard installations.
• Large vent helps to prevent blockage and has IX" F. NPT for vent
piping.
• With 15 PSIG inlet pressure, regulator is designed to not pass
more than 2 PSIG with the seat disc removed.
• Replaceable valve orifice and valve seat.
• Straight line valve closure reduces wear on seat disc
• Unique bonnet vent profile minimizes vent freeze over when
properly installed.
• Large molded diaphragm is extra sensitive to pressure changes.
• Built in pressure tap has plugged 'W F. NPT outlet. Plug can be
removed with a 3116" hex allen wrench.
• Select Brown Finish
bight Angle Design
Can mount directly to vapor meter. It is also suitable for mounting
directly to the house piping. It will retrofit into existing installations that
are currently using a 90 degree, right angle regulator.
Materials
Body ........................ ............................... Die Cast Zinc
Bonnet........................................................................ Die Cast Zinc
Nozzle Orifice....................................................................... Brass
Spring...................................................................................... Steel
Valve Seat Disc ..................................................... Resilient Rubber
Diaphragm ......................... Integrated Fabric and Synthetic Rubber
Information
nPL
c
E
0, 7
;v m 1
i o1
c+
e
CR-fru.
BTUA r.
1
t 5
0
w/MowttingUracket
9 p 231ie
250,000 500,000 750,000 1,000,000 1,250,000
w4403B66RA 3 $ + f 1 PSIG I8''0
LV4403BHRAB'• /° F. NPT /+" F. NPT 3116" 9" to 13" w.c. Over Inlet
1,000,000
• Maximum flow is based on 10 PSIG inlet and W w.c. delivery pressure.
•• Mounting Bracket Included. 11t� 7+f
100 Rego Dr. Elan. NC 27244 USA www.regoproducts.com +1 (335) 449-7707 A21