HomeMy WebLinkAboutAPPROVED 2020 FL PRODUCT EVAL RPTNEMOI etc.
Certificate of Authorization #32455
353 Christian Street, Unit #13
Oxford, CT 06478
(203)262-9245
ENGINEER EVALUATE TEST LONSULI
4TION RFPOF
Polyglass USA, Inc. Evaluation Report P40690.12.13-1-R11
1111 West Newport Center Drive FL16717-R10
Deerfield Beach, FL 33442 Date of Issuance: 12/12/2013
(954) 233-1330 Revision 11: 10/01/2020
SCOPE:
This Evaluation Report is issued under Rule 61G20-3 and the applicable rules and regulations governing the use of
construction materials in the State of Florida. The documentation submitted has been reviewed by Robert Nieminen,
P.E. for use of the product under the Florida Building Code. The product described herein has been evaluated for
compliance with the 7th Edition (2020) Florida Building Code, High Velocity Hurricane Zone sections noted herein.
DESCRIPTION: Polyglass Modified Bitumen Roof Systems
LABELING: Labeling shall be in accordance with the requirements of the Accredited Quality Assurance Agency noted
herein.
CONTINUED COMPLIANCE: This Evaluation Report is valid until such time as the named product(s) changes, the referenced
Quality Assurance or production facility location(s) changes, or Code provisions that relate to the product(s) change.
Acceptance of our Evaluation Reports by the named client constitutes agreement to notify NEMO ETC, LLC of any
changes to the product(s), the Quality Assurance or the production facility location(s). NEMO ETC, LLC requires a
complete review of its Evaluation Report relative to updated Code requirements with each Code Cycle.
ADVERTISEMENT: The Florida Product Approval Number (FL#) preceded by the words "NEMOJetc. Evaluated" may be
displayed in advertising literature. If any portion of the Evaluation Report is displayed, then it shall be done in its
entirety.
INSPECTION: Upon request, a copy of this entire Evaluation Report shall be provided to the user by the manufacturer or
its distributors and shall be available for inspection at the job site at the request of the Building Official.
This Evaluation Report consists of pages 1 through 5, plus an 83-page Appendix.
Prepared b
rj g•
Robert J.M. Nieminen, P.E.%��F
R ='; �ra=,.'
The facsimile seal appearing was authorized by Robert
sS{� ��� �`•�.
Nieminen, P.E. on 10/Ol/2020. This does not serve as an
Florida Registration No. 59166, Florida DCA ANE1983
electronically signed document.
CERTIFICATION OF INDEPENDENCE:
1. NEW ETC, LLC does not have, nor does it intend to acquire or will it acquire, a financial interest in any company manufacturing or
distributing products it evaluates.
2. NEMO ETC, LLC is not owned, operated or controlled by any company manufacturing or distributing products it evaluates.
3. Robert Nieminen, P.E. does not have nor will acquire, a financial interest in any company manufacturing or distributing products for
which the evaluation reports are being issued.
4. Robert Nieminen, P.E. does not have, nor will acquire, a financial interest in any other entity involved in the approval process of the
product.
5. This is a building code evaluation. Neither NEW ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer of Record for any
project on which this Evaluation Report, or previous versions thereof, is/was used for permitting or design guidance unless retained
specifically for that purpose.
02018, NEMO ETC, LLC
ONEMOletc.
ROOFING SYSTEMS EVALUATION:
Product Category:
Roofing
Sub -Category:
Modified Bitumen Roof Systems
Compliance Statement: Polyglass Modified
Bitumen Roof Systems, as
produced by Polyglass USA, Inc., have
demonstrated compliance with the following sections
of the 7th Edition (2020) Florida Building Code, High Velocity
Hurricane Zone (HVHZ) through
testing in accordance
with the following
Standards. Compliance is subject
to the
Installation Requirements and Limitations / Conditions of Use set forth herein.
Section
Pro a
Standard
Year
TAS 110
Resistance to Foot
Traffic
TAS 114, Section
8.9
2011
TAS 110
Wind resistance
TAS 114, Appendix
C, D or J
2011
TAS 110
Susceptibility to Hail Damage
TAS 114, Appendix F
2011
TAS 110
Susceptibility to Leakage
TAS 114, Appendix G
2011
TAS 110
Material standard
ASTM D2178
2015
TAS 110
Material standard
ASTM D4601
2012
TAS 110
Material standard
ASTM D4897
2009
TAS 110
Material standard
ASTM D6162
2015
TAS 110
Material standard
ASTM D6163
2015
TAS 110
Material standard
ASTM D6164
2011
TAS 110
Material standard
ASTM D6222
2011
TAS 110
Material standard
ASTM D6509
2015
3. REFERENCES:
Entity
Exam
Reference
Date
Entity
Exam
Reference
Date
ERD (TST6049)
Physicals
P10490.10.08-2
10/30/2008
FM (TST1867)
FM 4470
3006115
05/02/2001
ERD (TST6049)
FM 4470/4474
P13760.09.09
09/10/2009
FM (TST1867)
FM 4470
3012321
07/29/2002
ERD (TST6049)
FM 4470/4474
P13770.09.09
09/10/2009
FM (TST1867)
FM 4470
3014692
08/05/2003
ERD (TST6049)
FM 4470/4474
P30540.11.09-R1
11/30/2009
FM (TST1867)
FM 4470
3014751
08/27/2003
01/13/2004
ERD (TST6049)
FM 4470/4474
P30550.12.09
12/02/2009
FM (TST1867)
FM 4470
3007170
06/30/2004
ERD (TST6049)
Physicals
P33960.12.10
12/30/2010
FM (TST1867)
FM 4470
3019317
07/30/2004
ERD (TST6049)
FM 4470/4474
P33970.03.11
03/15/2011
FM (TST1867)
FM 4470
3020703
01/31/2006
ERD (TST6049)
Physicals
P37590.03.13-3A
03/06/2013
FM (TST1867)
FM 4470/4474
3018332
03/20/2006
ERD (TST6049)
FM 4470/4474
P39680.03.13
03/04/2013
FM (TST1867)
FM 4470/4474
3023368
05/23/2006
ERD (TST6049)
Physicals
P37590.03.13-1-111
06/26/2013
FM (TST1867)
FM 4470/4474
3024594
07/18/2006
ERD (TST6049)
Physicals
P37590.03.13-2-R1
07/01/2013
FM (TST1867)
FM 4470/4474
3023458
ERD (TST6049)
Physicals
P37590.07.13-2
07/01/2013
FM (TST1867)
FM 4470/4474
3030668
09/12/2007
ERD (TST6049)
Physicals
P37590.03.13.5-111
07/01/2013
FM (TST1867)
FM 4470/4474
3032172
06/12/2009
ERD (TST6049)
Physicals
P37590.07.13-1
07/02/2013
FM (TST1867)
FM 4470/4474
3049631
04/21/2014
02/02/2017
ERD (TST6049)
FM 4470/4474
P41630.08.13
08/06/2013
09/04/2013
FM (TST1867)
NEMO (TST6049)
FM 4470/4474
Criticality
3057029
45-PLYG-18.001.06.18
06/23/2018
ERD (TST6049)
ERD (TST6049)
Physicals
Physicals
P45940.09.13
P44370.10.13
10/04/2013
NEMO (TST6049)
FM 4474
4L-PLYG-18.003.08.18
08/21/2018
ERD (TST6049)
Physicals
P39520.09.14-2
09/11/2014
NEMO (TST6049)
Criticality
45-PLYG-18.001.30.18
10/03/2018
ERD (TST6049)
FM 4470/4474
SC6160.11.14
11/10/2014
NEMO (TST6049)
ASTM D4897
4S-PLYG-18-002.11.18.2
11/16/2018
ERD (TST6049)
Physicals
P45440SC.03.15-1
03/31/2015
NEMO (TST6049)
ASTM D6164
4S-PLYG-18.002.11.18-3
11/28/2018
ERD (TST6049)
Physicals
SC5170.05.15
05/08/2015
NEMO (TST6049)
FM 4474
4L-PLYG-18.003.11.18
11/28/2018
ERD (TST6049)
FM 4474
SC8085.05.15
05/19/2015
NEMO (TST6049)
FM 4474
41.-PLYG-18-003.01.19
01/11/2019
ERD (TST6049)
Physicals
SC5170.12.15
12/29/2015
NEMO (TST6049)
ASTM D6163
45-PLYG-18-002.01.19-A
01/24/2019
ERD (TST6049)
FM 4470/4474
SC9455.15
04/01/2016
NEMO (TST6049)
ASTM D6162
4S-PLYG-18-002.01.19-B
01/25/2019
ERD (TST6049)
FM 4470/4474
PLYG-SC8905.05.16-1
05/17/2016
NEMO (TST6049)
FM 4474
4L-PLYG-18-003.04.19-A
04/08/2019
ERD (TST6049)
FM 4470/4474
PLYG-SC8905.05.16-2
05/17/2016
NEMO (TS16049)
ASTM D6222
4S-PLYG-18.002.05.19-C
OS/20/2019
ERD (TST6049)
FM 4470/4474
PLYG-SC30815.07.16•RS
09/23/2016
NEMO (TST6049)
ASTM D6222
45-PLYG-28.002.05.19-0
05/20/2019
ERD (TST6049)
UL 1897
PLYG-SC12025.10.16
10/12/2016
NEMO (TST6049)
ASTM D6163
4S-PLYG-18-002.05.19-H
05/20/2019
ERD (TST6049)
FM 4470/4474
PLYG-SC11475.16
11/17/2016
NEMO (TST6049)
ASTM D6164
45-PLYG-18.002.05.19-N
05/31/2019
ERD (TST6049)
FM 4470/4474
PLYG-SC33235.01.17
01/17/2017
NEMO (TST6049)
Criticality
4S-PLYG-18-001.06.19.A
07/17/2019
ERD (TST6049)
FM 4470/4474
PLYG-SC13920.05.17
05/30/2017
NEMO (TST6049)
ASTM D6164
45-PLYG-18-002.09.19-1
09/06/2019
ERD (TST11294)
FM 4470/4474
PLYG-CTL13945.05.17.1
05/30/2017
NEMO (TST6049)
ASTM D6164
4S-PLYG-18-002.09.19-1
09/06/2019
ERD (TST11294)
FM 4470/4474
PLYG-CrL13945.05.17-3
05/30/2017
NEMO (TST6049)
FM 4474
4a-PLYG-20-LSWUS-01.A
08/28/2020
ERD (TST6049)
FM 4470/4474
PLYG-SC13945.05.17
05/30/2017
PRI(TST5878)
Physicals
PUSA-062-02-01
12/04/2007
ERD (TST6049)
FM 4470/4474
PLYG-SC15760.09.17
09/11/2017
PRI(TST5878)
Physicals
PUSA-061-02-02
01/28/2008
FM (TST1867)
FM 4470
2W7A7.AM
08/04/1994
PRI(TST5878)
Physicals
PUSA-064-02-02
02/27/2008
FM (TST1867)
FM 4470
OD3A3.AM
04/04/1997
PRI(TST5878)
Physicals
PUSA-062-02-02
12/04/2008
NEMO ETC, LLC Evaluation Report P40690.12.13.1-R11
Certificate o}Authorization #32455 7T" EDITION (2020) FBC HVHZ EVALUATION FL16717-R10
Polyglass Modified Bitumen Roof Systems Revision 11:10/01/2020
Page 2 of 5
ONEMOjetc.
Entity Exam Reference Date Entit Exam Reference Date
FM (TST1867) FM 4470 2DOAO.AM 12/23/1998 PRI(TST5878) TAS 114 PUSA-188-02-01 02/08/2017
FM (TST1867) FM 4470 2D5A9.AM 06/22/1999 PRI(TST5878) TAS 114 PUSA-188-02-02 02/08/2017
FM (TST1867) FM 4470 3006646 01/04/2000 PRI(TST5878) TAS 114 PUSA-188-02-03 02/08/2017
FM (TST1867) FM 4470 3001334 01/25/2000 PRI(TST5878) TAS 114 PUSA-202-02-01 05/17/2017
FM (TST1867) FM 4470 3001334 02/15/2000 PRI(TST5878) TAS 114 PUSA-202-02-02 05/17/2017
FM (TST1867) FM 4470 3000857 01/12/2000 M-D (CER1592) HVHZ Various NCAs Various
FM (TST1867) FM 4470 3004091 01/12/2000 M-D(CER1592) Prop. for Rev. 10-0823 10/12/2010
UL (QUA9625) Quality Control Service Confirm 09/13/2018
4. •••DDESCRIPTION!
This Evaluation Report covers Polyglass Modified Bitumen Roof Systems installed in accordance with Polyglass
Ilse_ Inc- nublished installation instructions and the Limitations / Conditions of Use herein.
r TABLE 1: ROLL -GOODS FOR MODIFIED BITUMEN ROOF SYSTEMS
Type
Product
Material Standard
Plant(s)
Reference
Type
Grade
Base Sheets
Smooth::IPolyflex
Membranes
APP, Granule -Surface
Membranes
SBS, Smooth -Surface
Membranes
Polyglass G2 Base
ASTM D46O1
II
N/A
AL
Polyflex SA Base
Elastobase SA
ASTM D46O1
ASTM D46O1
II
II
N/A
N/A
FL
PA
Elastovent
ASTM D4897
N/A
N/A
PA
olybond
ASTM D65O9
ASTM D6222
N/A
I
N/A
S
FL
FLAPP,
ASTM D6222
I
S
FL
Polykool
Polybond G
ASTM D6222
ASTM D6222
I
I
S
G
FL
FL
Polyflex G
Polyflex G FR
ASTM D6222
ASTM D6222
I
I
G
G
FL
FL
Polyfresko G
Polyfresko G FR
Polyflex SA P
ASTM D6222 T
ASTM D6222
ASTM D6222
I
I
G
G
G
NV
NV
FL, TX
Polyflex SA P FR
Polyfresko G SA
ASTM D6222
ASTM D6222
I
I
G
G
TX
NV
Polyfresko G SA FR
Elastoshield HT
ASTM D6222
ASTM D6162
I
III
G
S
NV
FL
Elastobase
ASTM D6163
I
S
FL
Elastoflex V
Elastoflex SA V
Elastoflex SA V FR
Elastoflex SA V Plus
ASTM D6163
ASTM D6163
ASTM D6163
ASTM D6163
I
I
I
I
S
S
S
S
FL
FL, PA, TX
FL, PA, TX
FL, TX
Elastoflex SA V Plus FR
Elastobase P
ASTM D6163
ASTM D6164
I
I
S
S
FL, TX
FL, TX
Elastoflex SA Base HD
ASTM D6164
I
S
PA, TX
Elastoflex S6
ASTM D6164
I
S
FL
Elastoflex S6 HP
ASTM D6164
II
S
NV
Polyreflect
ASTM D6164
I
S
FL
TABLE 1: ROLL -GOODS FOR MODIFIED BITUMEN ROOF SYSTEMS
Type
Product
Material Standard
Plant(s)
Reference
Type
Grade
Elastoshield HT G
ASTM D6162
III
G
FL
Elastoshield HT G FR
ASTM D6162
III
G
FL
SBS, Granule Surface
Elastoflex V G
ASTM D6163
I
G
FL, PA
Membranes
Elastoflex V G FR
ASTM D6163
I
G
FL, PA
Elastoflex S6 G
ASTM D6164
I
G
FL, PA
Elastoflex S6 G FR
ASTM D6164
I
G
FL
Evaluation Report P40690.12.13-1-R11
NEMO ETC, LLC FL16717-R10
Certificate of Authorization #32455 7r" EDITION (2020) FBC HVHZ EVALUATION
Polyglass Modified Bitumen Roof Systems Revision 11: Page 3 of 10ge 3 of 5
5
ONEMOletc.
TABLE 1: ROLL -GOODS FOR MODIFIED BITUMEN ROOF SYSTEMS
Type
Product
Material Standard
Plant(s)
Reference
Type
Grade
Elastoshield TS G
ASTM D6164
I
G
FL, TX
Elastoshield TS G FR
ASTM D6164
I
G
FL, TX
Elastoflex SA P
ASTM D6164
I
G
FL, TX
Elastoflex SA P FR
ASTM D6164
I
G
FL, TX
5. LIMITATIONS:
5.1 This is a Building Code Evaluation. Neither NEMO ETC, LLC nor Robert Nieminen, P.E. are, in any way, the Designer
of Record for any project on which this Evaluation Report, or previous versions thereof, is/was used for permitting
or design guidance unless retained specifically for that purpose.
5.2 This Evaluation Report is not for use in Non -High Velocity Hurricane Zone jurisdictions.
5.3 The evaluation herein pertains to above -deck roof components; deck -attachment details pertain to 'as -tested'
conditions under Testing Application Standard TAS 114, Appendix J. Roof decks shall be in accordance with FBC
HVHZ requirements to the satisfaction of the Authority Having Jurisdiction.
5.4 This Evaluation Report does not include evaluation of fire classification. Refer to FBC HVHZ 1516 for requirements
and limitations regarding roof assembly fire classification. Refer to FBC 2603 for requirements and limitations
concerning the use of foam plastic insulation.
5.5 This Evaluation Report does not include evaluation of roof edge termination. Refer to Roofing Application
Standard RAS 111 for requirements and limitations regarding edge securement for low -slope roofs.
5.6 Refer to FBC HVHZ 1521 for requirements and limitations regarding recover installations.
5.6.1 For mechanically attached components over existing roof decks, fasteners shall be tested in the existing deck for
withdrawal resistance. A qualified design professional shall review the data for comparison to the minimum
requirements for the system. Testing shall be in accordance with Testing Application Standard TAS 105.
5.6.2 For bonded insulation or membrane over existing substrates in a re -roof (tear off) or recover installation, the
existing deck or existing roof surface shall be examined for compatibility with the adhesive to be installed. If any
surface conditions exist that bring system performance into question, field uplift testing in accordance with Testing
Application Standard TAS 124 shall be conducted on mock-ups of the proposed new roof assembly.
5.6.3 For bonded insulation or membrane over existing substrates in a recover installation, the existing roof system shall
be capable of resisting project design pressures on its own merit to the satisfaction of the Authority Having
Jurisdiction, as documented through field uplift testing in accordance with Testing Application Standard TAS 124.
5.7 Refer to Appendix 1 for system attachment requirements for wind load resistance.
5.7.1 "MDP" = Maximum Design Pressure is the result of testing for wind load resistance based on allowable wind loads,
and reflects the ultimate passing pressure divided by 2 (the 2 to 1 margin of safety per Testing Application
Standard TAS 114 has already been applied). Refer to FBC HVHZ 1620 and Roofing Application Standard RAS 128
for determination of design wind loads.
5.7.2 For mechanically attached components, the maximum design pressure for the selected assembly shall meet or
exceed at least the Zone 1 PRIME design pressure determined in accordance with FBC HVHZ 1620 or Roofing
Application Standard RAS 128. Elevated pressure zones shall employ an attachment density designed by a
qualified design professional to resist the elevated pressure criteria. Analysis shall be in accordance with Roofing
Application Standard RAS 117 or Roofing Application Standard RAS 137. *This extrapolation Is not permitted for
systems marked with an asterisk*.
5.7.3 For assemblies marked with an asterisk*, the maximum design pressure (MDP) limitation shall be applicable to all
roof pressure zones. Rational analysis is not permitted.
NEMO ETC, LLC Evaluation Report P40690.12.13-1-R11
Certificate of Authorization #32455 7T" EDITION (2020) FBC HVHZ EVALUATION FL16717-R10
Polyglass Modified Bitumen Roof Systems Revision 11: 10/01/2020
Page 4 of 5
5.8
ONEMOletc.
All components in the roof assembly shall have quality assurance audit in accordance with F.A.C. Rule 614320-3.
Refer to the Product Approval of the component manufacturer for components listed in Appendix 1 that are
produced by a Product Manufacturer other than the report holder on Page 1 of this Evaluation Report.
Polyglass Modified Bitumen Roof Systems shall be installed in accordance with Polyglass USA, Inc. published
installation instructions, subject to the Limitations / Conditions of Use noted herein.
As required by the Building Official or Authority Having Jurisdiction to properly evaluate the installation of this
product.
Contact the named QA entity for manufacturing facilities covered by F.A.C. Rule 61G20-3 OA requirements. Refer
to Section 4 herein for products and production locations having met codified material standards.
UL LLC — QUA9625; 414 248-6409, karen.buchmann@ul.com
- THE 83-PAGES THAT FOLLOW FORM PART OF THIS EVALUATION REPORT -
Evaluation Report P40690.12.13-1-R31
NEMO ETC, LLC FL16717-R10
Certificate of Authorizotion #32455 7T" EDITION (2020) FBC HVHZ EVALUATION
Polyglass Modified Bitumen Roof Systems Revision 11:10/01/2020
Page 5 of 5